UNIVERSITI TUN HUSSEIN ONN MALAYSIA

FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

PERANCANGAN KULIAHLECTURE PLAN

MAKLUMAT KURSUS (COURSE INFORMATION)

SEMESTER / SESI (SEMESTER / SESSION): 1/ 2015 - 2016

KOD KURSUS (COURSE CODE): BDA 20703

NAMA KURSUS (COURSE TITLE): TERMODINAMIK 1 (THERMODYNAMICS 1)

BEBAN AKADEMIK PELAJAR (STUDENT ACADEMIC LOAD): -

Kategori Aktiviti(Category of Activities)Aktiviti Pembelajaran (Learning Activities)Jumlah Jam/ Semester(Total Hours/ Semester)

Pembelajaran bersemuka(Face-to-face learning)Kuliah (Lecture)28

Tutorial / Amali (Tutorial / Practical)26

Aktiviti pembelajaran berpusatkan pelajar lain(Other student centered learning activities)2

Pembelajaran kendiri(Independent study)Penyediaan tugasan, projek dan lain-lain(Preparing assignment, project and others) 15

Ulangkaji(Revision)35

Persediaan bagi pentaksiran(Preparation for assessment)6

Pentaksiran rasmi(Formal assessment)Pentaksiran berterusan(Continuous assessment)5

Peperiksaan akhir(Final examination)3

JUMLAH JAM BELAJAR PELAJAR (JBP)(TOTAL STUDENT LEARNING TIME (SLT))120

Kursus Pra-syarat (Prerequisite Course): ENGINEERING MATHEMATICS I (BSM 1913) & ENGINEERING MATHEMATICS II (BSM 1923)

Nama Staf Akademik (Name of Academic Staff): EN. Md. Nor Anuar bin Mohammad (COORDINATOR) EN. HANIS BIN ZAKARIA DR. AZWAN BIN SAPIT

Disediakan oleh (Prepared by):Disahkan oleh (Approved by):

Tandatangan (Signature):Tandatangan (Signature):

Nama (Name): EN. MD. NOR ANUAR BIN MOHAMADNama (Name): PM. DR. NORZELAWATI BINTI ASMUIN

Tarikh (Date): 30 OGOS 2015Tarikh (Date): 30 OGOS 2015

MATLAMAT (GOALS):

The aim of the subject is to equip the students with the knowledge, understanding of the concepts, principles, thermodynamics laws and its applications.

SINOPSIS (SYNOPSIS):

This course will cover the basic concepts of thermodynamics & energy transfer, properties engineering working fluid, the laws of thermodynamics, entropy, thermodynamics cycles and introduction to heat transfer.

HASIL PEMBELAJARAN (LEARNING OUTCOMES):

At the end of this course, the students are able:

(1) Analyze thermodynamics and energy transfer problems using appropriate concepts, principles, theories and formulas. (C4, LO11)(2) Explain the principles, theories and formulas related to the fundamental concepts of thermodynamics problems using appropriate techniques. (C3, LO1)(3) Demonstrate a team working environment through given assignments. (A3, LO5)

ISI KANDUNGAN (CONTENT):

MINGGU(WEEK)KANDUNGAN(CONTENT)PENTAKSIRAN(ASSESSMENT)

1-21.0 BASIC CONCEPTS OF THERMODYNAMICS AND ENERGY TRANSFER (6 Hours)

1.1 Definition of Thermodynamics and Energy, Classical and Statistical Thermodynamics, Dimensions and Units.1.2 Closed and Open Systems, Properties of a System, State and Equilibrium.1.3 Processes and Cycles, Law of Thermodynamics, Temperature and Pressure, Manometer and Barometer.1.4 Form of Energy, Energy Transfer, Forms of Works, Energy Conversion Efficiency, Energy and Environment..

Test 1, Quiz,Assignment,Final Exam

3-52.0 PROPERTIES OF ENGINEERING WORKING FLUID (9 Hours)

2.1 Definition of Pure Substances, Phases of Pure Substances, Phase-Change Processes of Pure Substances. 2.2 Property Diagrams and Chart for Phase-Change Processes.2.3 Property Tables (Compressed Liquid, Saturated and Superheated Condition for Common Fluid).2.4 The Ideal-Gas Equation of State.

Test 1,Quiz,Assignment,Final Exam

6TEST 114 October 20158:30pm 10:00pmF2 (B)

MINGGU(WEEK)KANDUNGAN(CONTENT)PENTAKSIRAN(ASSESSMENT)

6 - 73.0 THE FIRST LAW OF THERMODYNAMICS FOR CLOSED AND OPEN SYSTEM (12 Hours)

3.1Introduction of First Law of Thermodynamics for Closed System. 3.2Conservation Principle (Energy and Mass), Energy Balance for Closed System. 3.3Boundary Work, Polytropic Process and P-V Diagram.3.4Specific Heats, Internal Energy and Enthalpy for Ideal Gases, Solids, and Liquids.

Quiz,Assignment,Final Exam

8MAJOR QUIZ25 ~ 29 October 2015

8-93.5 Introduction of First Law of Thermodynamics for Open System. 3.6Conservation Principle (Energy and Mass), Energy Balance for Open System. 3.7Flow Work, P-V Diagram, and Energy of a Flowing Fluid.3.8Energy Analysis of Steady-Flow Systems, and Steady-Flow Devices.3.9Energy Analysis of Unsteady-Flow Processes.

Test 2, Quiz,Assignment,Final Exam

Semester break 814 November 2015

10 - 11

4.0 THE SECOND LAW OF THERMODYNAMICS (6 Hours)

4.1 Introduction to the Second Law, Thermal Energy Reservoirs.4.2 Heat Engines, Refrigerators and Heat Pumps.4.3 Perpetual-Motion Machines.4.4 Reversible and Irreversible Processes4.5 The Carnot Cycle and Principles, Thermodynamic Temperature Scale.4.6 The Carnot Heat Engine, Refrigerators and Heat Pump.

Test 2,Assignment,Quiz,Final Exam

12-145.0 ENTROPY (9 Hours)

5.1 Introduction to the Entropy, Isentropic Processes. 5.2 The T ds Relations, T-s and h-s Diagram, 5.3 Entropy Change Pure Substances.5.4 Reversible Steady-Flow Work. 5.5 Isentropic Efficiencies of Steady-Flow Devices

Quiz,Assignment,Final Exam

14Submit Group Assignment Report13 ~ 17 December 2015

14TEST 216 December 20158:30pm 10:00pmF2 (A)

STUDY WEEK 2026 December 2015

16-18FINAL EXAMDecember 2015 January 2016

TUGASAN / PROJEK (ASSIGNMENT / PROJECT):

(1) Tugasan akan diberikan secara individu dan berkumpulan.Untuk tugasan individu, pelajar-pelajar dikehendaki menjawab semua soalan yang diberikan mengikut topik. Penilaian dibuat berdasarkan kertas jawapan tugasan.

Assignment will be given individually and grouping. For individual assignment all students must answer all the assignment questions for each chapter. Project assessment will be done based on answer paper of the assignment.

(2) Tugasan berkumpulan pula diberikan kepada kumpulan pelajar tidak melebihi 5 orang berdasarkan tajuk yang telah ditetapkan. Penilaian adalah berdasarkan laporan tugasan yang disediakan kumpulan pelajar berkenaan.

PENTAKSIRAN (ASSESSMENT):

1.Tugasan (Assignment):-

1.1 Tugasan Individu (Individual Assignment): 4 %

1.2 Tugasan berkumpulan (Group Assignment): 8 %

2.Ujian (Test):-

2.1 Ujian 1 (Test 1): 13 %

2.2 Ujian 2 (Test 2): 13 %

3.Kuiz (Quizes): 8 %

4.Kuiz Utama (Major Quiz) 4 %

5.Project (Project): - %

6.Lain-lain (Others): - %

7.Peperiksaan Akhir (Final Examination) : 50 %

Jumlah (Total): 100 %

RUJUKAN (REFERENCES):

Rujukan Utama : Main References :

(1) Yunus A. Cengel and Micheal A. Boles; Thermodynamics: An Engineering Approach, 8th Edition, McGraw Hill 2015. (Call Number: TJ265 .C46 2015)

(2) Michael J. Moran and Howard N. Shapiro; Fundamentals of Engineering Thermodynamics, 6th Edition, New York: John Wiley, 2010. (Call Number: TJ265 .M67 2010)

Rujukan Lain :Others References :

(1) Claus Borgnakke and Richard E. Sonntag; Fundamentals of Thermodynamics, 8h Edition, New York: John Wiley, 2014. (Call Number: TJ265 .S66 2014)

KEHADIRAN / PERATURAN SEMASA KULIAH (ATTENDANCE / REGULATIONS DURING LECTURE)

1.Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus termasuk kursus Hadir Wajib (HW) dan kursus Hadir Sahaja (HS).Students must attend not less than 80% of the contact hours specified for a course including Compulsory Attendance (HW) course and Attendance Only (HS) course.

2.Pelajar yang tidak memenuhi perkara 1 di atas tidak dibenarkan menghadiri kuliah dan menduduki sebarang bentuk pentaksiran selanjutnya. Markah sifar 0 akan diberikan kepada pelajar yang gagal memenuhi perkara 1. Manakala untuk kursus HW, pelajar yang gagal memenuhi perkara 1 akan diberi gred Hadir Gagal (HG).Students who do not fulfill item 1 of the above are not allowed to attend further lecture and sit for any form of assessment. Zero 0 mark will be given to students who fail to comply with item 1. As for HW course, students who fail to comply with item 1 will be given Failure Attendance (HG) grade.

3. Tidak ada pengulangan, atau penambahan penilaian (ujian, kuiz dan peperiksaan) yang akan diberikan kepada pelajar-pelajar yang gagal hadir secara peribadi mana-mana penilaian yang telah diadakan pada tarikh dan masa yang ditetapkan .There is no repetition or additional assessment (tests, quizzes and exams) will be given to students who fail to attend personally any assessments held at predetermined date and time.

4.Pelajar perlu patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.Students should adhere to the dress regulations in effect and must discipline themselves to avoid from any disciplinary actions.

5.Pelajar perlu mematuhi peraturan keselamatan sepanjang aktiviti pembelajaran dan pengajaran.Students should adhere to the safety regulations throughout the learning and teaching activities.

MATRIK HASIL PEMBELAJARAN KURSUS DAN HASIL PEMBELAJARAN PROGRAM(MATRIX OF COURSE LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES)

Dilampirkan. (Attached).

Lampiran A

RPP-04 / Prosedur Pelaksanaan KuliahEdisi: 4 / No. Semakan: 0