Personal Biodata:

Name: Mohd Syahril Awang Tih

Address: No 17, Jalan Sierra Ukay 5, Taman Sierra Ukay Perdana, 68000 Ampang, Selangor, Malaysia.

Phone no: +6019-9855467 / +6012-3245467

Email: syahril1@hotmail.comNric no/D.O. B: 860719-46-5467 / 19th July 1986

Status: Married

Education:

UTM Space - Bachelor Degree of Mechanical - 2008-2018

Politeknik Seberang Perai, Pulau Pinang - Diploma in Mechanical Engineering - 2005-2007 - CGPA: 3.71

Certification:

NIOSH - OGSP Safety Passport NDE Global Technical Services (USA) Online Qualification NIOSH - TNBExamination Personal. CSWIP 3.1 Welding Inspector Level 2> Safety Approval Certificates (HSSE) Aramco Approved Inspector > Expeditor Approval Certificates > QM 06, 07, 08, 37, 03, 13, 14, 15, 24, 35, 45, 04, 32, 33, 30 & 34> Inspector Approval CertificatesNDE Personnel Certification ASNT TC 1A

> MT & PT Level IIAttending class of CSWIP 3.2 Radiographic Interpreter

Career Objectives:

A self-motivated Welding Inspector, Mechanical/QAQC Inspector & Expeditor with over 7 years experience in Fabrication/Vendor Inspection of Oil & Gas equipment at Various of Country for Vessel (Filter, Separator, Coalescor etc), Coulomb, Heat exchanger, Tank, Air cooler, Metering skid & Piping package, Structure, pipe bending, skid package and Valves.

Seeking for a position as Welding Inspector, Expeditor, QAQC Inspector or any position that is suitable with my working experience and my academic qualification where I can grow and become an asset.

Employment History:

Rina Singapore (April 2015 - Present/On Call Assignment)

Current position: Welding Inspector cum Expeditor

Job Responsibilities:Attending the inspection as per received NOI (Notification of Inspection).

Project involved with various of discipline such as documentation review (MDR), witness the test (HT, PMI, Leak Test, Rotating equipment. Lab test etc).

Project/Activity Involved:

Jangkrik Complex Project FPU (Vessel, Skid) Angola 15/6 East Hub Development (Separator vessel)

Daman Development project (HDPUF Qualification test) Mumbai High South Redevelopment Phase 3 (Test separator)

Budiman Inspection Sdn Bhd (Nov 2011 - Present/On Call Assignment)

Current position: Welding Inspector cum Expeditor

Job Responsibilities:

Carry out Inspection base on approved ITP (Inspection Test Plan), drawing and procedures.

Witnessed and carried out inspection for the arriving material such as Plates, Flanges (ASME B16.5), Pipes and others related item refer to Material Certification with Approved Drawing, ASME Section II Part A Edition 2010 (Material Specification).

Witnessed (spot), Traceability, Fit up inspection, Nozzles layout dimension, Welding and visual, Internal and external, Outline drawing and involved in Welder qualification test (WQT) for the assign project. Monitor the welding activity as per approved WPS/PQR and project procedures.

Employment History (Continue):

Conduct Inspection for Hydro Test, Final Dimension Internal / External, Blasting and Painting with related test (DFT, Holiday Test),

Hardness Test, PMI test and Visual Inspection for assign project refer to approved ITP and procedures. Review and witnessed the calibrated gauge, temp gauge, water analysis and chart decoder while perform HT.

Review and witnessed some of NDE activity such WFMT, MT, PTF, PT, RT and UT examination in accordance with ASME Section V

(NDT Examination) for the assign project refer to ITP and client procedures.

Responsible in managing and coordinating all project materials deliveries to fabrication yard and to site.

Responsible in planning & managing all logistics activities and to ensure to comply to client requirement as well as the authorities.

Responsible for compilation of all site material and equipment technical documents.

Responsible to ensure that Machineries/Equipment bought arrive on time and able to spot potential trouble areas arising in non-conformance and delays.

To liaise and coordinate with Third Party Inspectors, Vendors, Principal, Shipping Dept ensuring regular reports on progress of purchased Machineries/Equip, relevant documentation and other logistical arrangement to ensure zero slippage on deliveries and documentation.

To keep and update the Procurement Dept, Project Dept. and Client on the daily status of incoming material.

Project/Activity Involved:

B193 HP Gas Compression Module PROJECT (Vessel/Separator) FPSO ARMADA CLAIRE (Pressure Vessel)

Australia Pacific LNG Project GLNG (Gladstone Natural Gas Project)

PRR2 Project (Valve, Heat Exchanger, Cable Tray & Junction Box) Shell Stone FPSO Project

TAKREER RRE Project (Valve) SADARA Project (Control Valve)

Gas Turbine Alternator Project (Lube Oil Cooler Package) RABIGH PHASE II CP3/4 Project

PNG-LNG Project (Control Valve) LR2 Refinery Project - Refractory Lab TestAttending the Lab testing for refractory brick as per ASTM on Bulk Density (ASTM C134), Cold Crushing Strength (ASTM C133), Permanent Linear change (ASTM C113) and Thermal conductivity (ASTM C202).

The scope also on monitoring and witness the brick preparation and firing at 110, 815 and 1100 deg C as per ASTM C401

Velosi (M) Sdn Bhd (Nov 2013 Present/On Call Assignment)

Current position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

Attend the inspection as per given NOI with references by ITP inspection point.

The activity covering the in process of fabrication (visual on welding) for pedestal, turret, boom top & bottom, winch and power pack

Final inspection before delivery for pedestal on painting and all quality document such as painting report etc.

Review all the NDE report, Mill certificates and MDR for all the crane parts.

Pre-commissioning inspection on major part for winch, cabin, slew ring, slew drive, bolt torque inspection and associate work.

Witness the high pressure hydro test for hydraulic hose.

Involved in FAT & COMMISSIONING for pedestal crane such as functional test, load test and endurance test.

Produce Inspection report and Inspection release Certificates (IRC).

Project/Activity Involved:

Satah Razboot Filed Development Project Gissar Project - Pressure Vessel

KAOMBO Project - Vessel & Steel Structures Diyina Riap Project - Pedestal Crane

Upper Zakum 750K Project P-7551 (Pedestal Crane)

Employment History (Continue): Eram International, Al Khobar, KSA (June 2015 Present/On Call Assignment)

Current position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

Expedite the documentation submission by vendor, client such as ITP and related procedures.

Monitor of welding work, consumables issued & welding parameters before, during/after welding as per ITP & procedure.

Monitoring FAT such as Pneumatic Test, Hydrostatic Test, Leak Test as per Test Package, Including POP Test of SDV, Stroke

Test of PSV, Functional test of Pressure Transmitter, Soundest Test, Concussion or vibration Test of Pumps.

Ensure that all inspection reports are accurate and that all attached documents are current status.

Project/Activity Involved:

Aramco Job QM 03 - Mechanical General Midyan Gas Processing Facilities (Analyzer Shelter) Khurais Wells Manifolds and pipeline (Modular skids) Intertek Malaysia (formerly known as MOODY INTERNATIONAL) (Nov 2014 Present/On Call Assignment)

Current position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

Monitoring & supervision to ensure all the activities should based on client specification, codes or standard & site changes.

Prepare Inspection & Test Plan (ITP) and QA/QC procedures as per client requirements when required.

Material receiving inspection with mill certificate trace ability ready for material receiving report.

Perform final inspection inclusive of fit-up, joint configuration, joint cleanliness, dimensional, visual etc. of pressure vessel, heat exchangers & skid piping.

Spot witnessed on PWHT activity, Thermocouple installation refer as per approved PWHT procedure for assign project.

Review Manufacturing Data Record (MDR) accordingly to make sure all the related document are completed and comply with the ASME Section VIII Div 1 (Pressure Vessel edition 2010), ITP, Procedures, Approved drawing and project specification.

Involved in packing activity and final inspection before delivery subject reference approved packing procedure, packing list.

Generate reporting for inspection activity as per client instruction such as weekly report or daily report.

Coordinate and perform NDT activity and up dated to Weld NDT Summery and review film after completed Radiograph Test.

Project/Activity Involved:

SK316 Development Project Kanowit PFLNG Tie-In Project

Zuliyah Gas Plant Project (Heat Exchanger) Tapis EOR Brownfield Modifications/Retrofit Project

Vietnam NSRP Project (J/V) Lawit ProjectJangkrik Complex Project FPU (Hot bend pipe)

Energy Engineering, Abu Dhabi, UAE (Nov 2014 Feb 2015)

Last position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

To attend the PIM as per assign NOI, joint meeting with AOC rep, ABS rep and YOKOGAWA SINGAPORE as place of PIM.

To attend the Visual welding, NDT witness, painting & FAT for the analyser shelter purposely for the Mechanical parts & component.

Expedite the documentation submission by vendor, such as ITP and related procedures.

Inspection carried out as per project specification and approved procedures.

Coordinate NDT team to perform NDT on the selected points. Review RT film & identify any significant wall loss on selected points.

Monitor on welding activity (repair work), piping / vessel etc.

Ensure competency in non-destructive inspection techniques including radiographic film interpretation, ultrasonic readings and magnetic particle and dye penetrant inspection procedures.

Employment History (Continue):

Verify material documentation and PMI requirements for the project.

Inspect all weld joint configurations, preparation and fit-ups for compliance to job requirements

Project/Activity Involved:

Esmeraldas Refinery Project

AMO & Partners Engineering, Jeddah KSA (Jan 2014 Aug 2014)

Last position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

To attend the Factory Acceptance Test as per assign NOI.

Expedite the documentation submission by vendor, client such as ITP and related procedures.

Witness hydro test on pipe line as per ASME B31.3 and HT Procedure.

Witness visual, piping line check as per test package and dimensional inspection for the skid package.

Inspection carried out as per project specification (PTS) and approved procedures.

Review the MDR such as test report, mill certificates, NDE compiling report, RT film review and others related activity.

Provide the inspection flash report daily and final inspection report at the end of visit.

Project/Activity Involved:

Wasit SRU & Utilities Project - #Package 3 Aramco Job QM 07 (Control Valve)

Cuteh Solution Pte. Ltd, Singapore (Dec 2013 Jan 2014)

Last position: Welding Inspector / Mechanical Inspector

Job Responsibilities:

To carry out inspection before, during and after welding activity and to ensure that all operations concerning welding are carried out in strict accordance with written or agreed practices or specification.

Check both the P&IDs and approved for construction drawings to ensure that only specified materials are used i.e. pipe schedule, flange rating, valve class.

Verify material documentation and PMI requirements for the project.

Visual Inspection such as painting condition (Visual & DFT check), parts installation as per Drawing and Specification Sheet, Painting,

Packing and review the related document as per client request.

Ensure the quality and reliability of the non-destructive inspection results.

Verify that the hydrostatic test equipment, procedures and results confirm to the code requirements.

Mackenzie Industries Sdn Bhd (Wasco Group) (2009 2011)

Last position: QAQC Inspector

KNM Ogpet ( East Cost ) Sdn Bhd, Pelabuhan Kuantan (2008 2009)

Last position: QAQC Inspector / Site Supervisor

Professional Training, Course & Seminar Attended:

In-house Seminar of Understanding of Fabrication process, Pressure Vessel Fabrication Process and Inspection, Fabrication Work Flow

(Heavy Wall SS Pressure Vessel), Fabrication Sequence of Activities and Inspection Points.

DOMI Course Understanding of Boiler system, HRSG, Fire Tube etc

NDE ITALY - SAUDI ARAMCO Preparation Course & Examination

Technical Engineer Training on DESALTER & SEPARATOR PROCESS SYSTEM

CSWIP 3.4 Radiographic Interpreter Course & Exam, TWI SEA KL

Related Subject Undergone:

Fluid Mechanic Dynamic

Material Science Mechanic Composite

Thermodynamic Hydraulic & Pneumatic

Solid Mechanic Engineering Drawing

Skills & Proficiencies:

Language Skills:

Good command of English and Bahasa Malaysia.

Computer Skills:

Microsoft Office (Word, Excel & PowerPoint) Auto CAD

Others Skills & Strength:

Familiar and having experience working to ASME VIII, ASME IX, ASME II, AWS D1.1, ASME B31.1/31.3, API 598, API 6D, API 600, API 594

API 580, ASME B16.1 / 16.10 / 16.11 / 16.25 /16.34 /16.5 / 16.9, ISA 75.08.01 TO ISA 75.08.09, API 510 & 570, AWS D1. ASTM, TEMA, NEMA, IECEX, ANSI, SSPC, ASNT, API & ISA 75.19.01 HYDROSTATIC TEST OF CONTROL VALVE, MSS SP 25, MSS SP 25, EN 10204

and client specifications.

ARAMCO Specification, Form 175, SAMSS, SAIP, SAER, SAEP, SAES.

Expertise in inspection of Blasting, Surface-Preparation, WFT, DFT & Wrapping of U/G Pipes 2 / 3 Layers as per international standards

SA2, SA2.5, SA3.0 OR SSPC -SP6, SP7, SP10 or as per NACE.

Good knowledge and expertise in P&ID, Mechanical Drawing (Vessel, Tank, Column, Valve, Skid, Crane) , Piping Drawing, PDMS, Work

Pad/Scheduling, Isometric Drawing, Structures Drawing.

Familiar with Instruction Manual, ITP, Procedures - NDT, MT, PT,UT,RT,MPT, Painting, Cryogenic Test, High Pressure Hose Test, Hydro

Static Test, WPS/PQR/WQT & FAT.

References:

Tuan Adnan Tuan Ali - Managing Director / Sr. Inspector - Budiman Inspection Sdn Bhd - (+6013 9821405)

Rasidah Wagiman - Technical Coordinator - NDE Technical Services Singapore - (+65 6425 0018)

Job Preferences:

Date of availability - After one-week notice

Background graphicMOHD SYAHRIL AWANG TIHWELDING INSPECTOR - EXPEDITOR

Background graphicMOHD SYAHRIL AWANG TIHWELDING INSPECTOR - EXPEDITOR