dr. mohd. kamaruddin bin abd. hamid · 2017-12-18 · district liason officer, institut inovasi...

DR. MOHD. KAMARUDDIN BIN ABD. HAMID PhD. (Chem. Eng.) (DTU), M.Eng. (Chem. Eng.) (UTM), B.Chem.Eng. (Hons.)(UTM), A.M.I.Chem.E. (UK), Grad.I.E.M., M.M.S.E.T., C.E.M. (AEMAS)

Summary

TEACHING

Total Subjects M.Sc. Bachelor Bachelor Part-time Diploma

56 12 35 6 3

Total Credit Hours M.Sc. Bachelor Bachelor Part-time Diploma

156 39 88 21 8

Total Credit Hours (minus lab and projek sarjana muda): 145

RESEARCH

Total Projects Principal Investigator Project Member Contract research

39 projects

(RM2,722,969)

7 projects

(RM312, 000)

25 projects

(RM1,834,087)

7 projects

(RM576,882)

PUBLICATIONS

Total Publications

ISI/WOS Journals

SCOPUS-indexed Journals

Non-indexed Journals

Books Book

Chapters Proceedings Others

169 12 41 4 2 7 102 1

Citations: 156

(Scopus)

323

(Google scholar)

h-index: 7

(Scopus)

8

(Google scholar)

SUPERVISION

Total Supervision

Graduated Ongoing:

61 Students 5 PhD 1 M.Phil 11 M.Eng. 31 B.Eng. 9 PhD 4 M.Phil.

ADMINISTRATION

Total Committee International National University Faculty Department

87 23 8 13 28 15

[DR. MOHD. KAMARUDDIN BIN ABD. HAMID]

Faculty of Chemical and Energy Engineering | Universiti Teknologi Malaysia 2

MOHD. KAMARUDDIN BIN ABD. HAMID

IT and Marketing Manager Process Systems Engineering Centre (PROSPECT)

Senior Lecturer Department of Chemical Engineering

Faculty of Chemical and Energy Engineering

Principal Researcher Research Institute of Sustainable Environment (RISE)

Universiti Teknologi Malaysia

81310 UTM Johor Bahru, Johor, MALAYSIA.

Certified Energy Manager ASEAN Energy Management Accreditation Scheme (AEMAS)

Tel: (6) 07 553 5517 Fax: (6) 07 558 8166

Mobile: (6) 013 779 0426 Email: [email protected]

Website: http://fcee.utm.my/kamaruddin/ Facebook: http://www.facebook.com/DrMKAH

SCOPUS Author ID: 35519901900

ResearcherID: F-5049-2011 ORCID: 0000-0001-6272-5224

PERSONAL DETAILS

Staff ID: 9311

I/C No.: 770426 – 12 – 5291

Date / Place of Birth: 26th. April, 1977 / Membakut, Sabah, Malaysia.

Citizenship: Malaysian

Home address: No. 34, Jalan Pulai Indah 10/3, Taman Pulai Indah, 81110 Johor Bahru, Johor, MALAYSIA.

Mobile Phone: +(6) 013 779 0426

Languages: Malay (excellent), English (excellent), Arabic (reading).

Marital Status: Married with two sons.

• Muhammad Afiq Zakwan

• Muhammad Adam Zarif Wife: DR. NORAZANA BINTI IBRAHIM

Senior Lecturer, Department of Energy Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, MALAYSIA.

CURICULLUM VITAE November 2017

Process Systems Engineering Centre (PROSPECT) | Research Institute of Sustainable Environment (RISE) 3

ACADEMIC BACKGROUND (My years as a student have significantly contributed to my self esteem, confidence, professional ethos and technical expertise, in chemical engineering, particularly in the process integration (process-controller design), process modelling, simulation and control) 2007 – 2011 Ph.D of Engineering (Chemical)

Title of Thesis: Model-Based Integrated Process Design and Controller Design of Chemical Processes. Supervisors: Rafiqul Gani and Gurkan Sin, Technical University of Denmark (DTU).

2001 – 2002 Master of Engineering (Chemical) Title of Thesis: Multiple Faults Detection Using Artificial Neural Networks.

Supervisor: Arshad bin Ahmad, Universiti Teknologi Malaysia (UTM). 1998 – 2001 Bachelor of Engineering (Chemical) (Hons.) Universiti Teknologi Malaysia (UTM). 1995 – 1998 American Degree Program (ADP), PPP/ITM Shah Alam, Selangor, Malaysia.

ESL, First and Second Year, Chemical Engineering

AREA OF EXPERTISE

� Energy Integrated Distillation Columns Sequence

� Energy Efficient Chemical Processes: Distillation Columns Sequence, Crude Distillation Unit.

� Sustainable Integrated Process Design and Control: Reactor, Distillation Column.

� Integrated Process Design and Control: Reactor, Distillation Column, Heat Exchanger Networks,

Micro-Bioreactor, Energy-Integrated Distillation Columns, Reactive Distillation Column.

� Process Modelling and Analysis using Computational Fluid Dynamic: Industrial Fluidized Bed

Polymerization Reactor, Proton Exchange Membrane Electrolyzer

� Process Modeling, Simulation and Control: Aspen HYSYS, MATLAB/Simulink

� Biofuel Production: Pyrolysis Kinetic Reaction Modeling

Other Expertise:

� Proficient in operating Chemical Engineering Process Simulators such as Aspen HYSYS, Aspen

DISTIL and Aspen HX-NET.

� Proficient in using MATLAB/Simulink.

� Proficient in Microsoft Word, Excel, Power Point, Visio, Visual Basic, Windows and Apple Mac.

� Proficient in using Macromedia Flash, Macromedia Dreanweaver, Adobe Photoshop, Adobe

InDesign and Joomla.



AWARDS AND HONORS RECEIVED

21. FKK UTM Excellent Service Award 2015 (Task Force Anugerah Kualiti Akademik).

20. FKK UTM Excellent Service Award 2015 (Task Force EAC Audit).

19. Best of the Best Award Innovative Practices in Higher Education Expo (I-PHEX2015)

18. Gold Medal Innovative Practices in Higher Education Expo (I-PHEX2015)

17. Bronze Medal INATEX 2013

16. Bronze Medal BioMalaysia & Bioeconomy Asia Pacific 2013

15. UTM Excellent Service Award 2012.

14. FKK UTM Excellent Service Award 2011

13. Malaysian Federal Scholarships Award (Ph.D. program) 2007 – 2010.

12. UTM Excellent Service Award 2006.

11. The Most Active E-Learning Subject in UTM (2005/2006-2).

10. UTM/PTP Scholarships (M. Eng. program) 2002 – 2003.

9. Dean’s List Award June 2001 (4th. Year, B.Eng.Chemical) FKKKSA.

8. Dean’s List Award Feb 2001 (3rd. Year, B.Eng.Chemical) FKKKSA.

7. Head of PPP Award Spring 1997 (2nd. Year, ADP Chem.Eng.) PPP/ITM.

6. Honors List Award Fall 1997 (2nd. Year, ADP Chem. Eng.) PPP/ITM.

5. Honors List Award Summer 1997 (2nd. Year, ADP Chem. Eng.) PPP/ITM.

4. Honors List Award Spring 1997 (2nd. Year, ADP Chem. Eng.) PPP/ITM.

3. Honors List Award Fall 1996 (1st. Year, ADP Chem. Eng.) PPP/ITM.

2. Honors List Award Summer 1996 (1st. Year, ADP Chem. Eng.) PPP/ITM.

1. Honors List Award Spring 1996 (1st. Year, ADP Chem. Eng.) PPP/ITM.

PROFESSIONAL MEMBERSHIPS / ASSOCIATIONS

8. Member, Persatuan Saintis Muslim Malaysia (PERINTIS). Membership Number: 179.

7. Certified Energy Manager, ASEAN Energy Manager Accreditation Scheme (AEMAS). Certificate No.: CEM-MY-632-1114.

6. Member, American Chemical Society (ACS) since 2014. Membership Number: 30774860.

5. Member, Malaysian Society for Engineering and Technology (MySET) since 2013. Membership Number: 001294.

4. Member, the American Institute of Chemical Engineers (AIChE) since 2007. Membership Number: 9900038936.

3. Associate Member, the Institution of Chemical Engineers (IChemE) since 2007. Membership Number: 99916820.

2. Graduate Member, the Institution of Engineers Malaysia (IEM) since 2006. Membership Number: G21744.

1. Graduate Engineer, Board of Engineers Malaysia (BEM) since 2001. Membership Number: 36936R.



ADMINISTRATION AND ADDITIONAL RESPONSIBILITIES Total Committee: 87; International: 23 committee; National: 8 committee; University: 13 committee; Faculty: 28 committee; Department: 15 committee. Academic: Senior Lecturer, Department of Chemical Engineering, Faculty of Chemical &

EnergyEngineering Administration: IT and Marketing Manager of PROSPECT Principal Researcher of Research Institute of Sustainable Environment (RISE)

Ofiice of Deputy Vice-Chancellor of Research and Innovation Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, MALAYSIA. Tel: +6-07-553 5517 Fax: +6-07-558 8166 Email: [email protected]

Website: http://www.cheme.utm.my/staff/kamaruddin/ Other responsibilities:

� District Liason Officer, Institut Inovasi Strategik Johor (IISJ) – Kulai � R&D Manager, Sabah English Aspiration Society (SEAS) � Director, American Chemistry Society (ACS) Southern Malaysia � Member, Universiti Teknologi Malaysia Shine Team (UTMShine) � Fellow Researcher, Process Systems Engineering Centre (PROSPECT),

Research Institute for Sustainable Environment (RISE), UTM. � Trainer, Process Operation, Control & Troubleshooting � Trainer, Distillation Operation, Control & Troubleshooting � Head, Consultancy projects � Head, Research projects � Assistant Chairman, Faculty of Chemical Engineering PhD viva-voce � Examiner, UTM Research University Grants Proposal � Examiner, Faculty of Chemical Engineering Master viva-voce � Examiner, Faculty of Chemical Engineering postgraduate first stage proposal � Member, EAC Self-Assessment Report (SAR) Committee, Department of

Chemical Engineering � Head, Panel of Process Control & Safety, Department of Chemical Engineering � Course Owner, Process Control & Instrumentation � Course Owner, Process Control Laboratory � Examiner, PROSPECT PG Seminar � Supervisor to postgraduate students

Other past responsibilities:

� Deputy Chairman, The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016)

� R&D Manager of PROSPECT � Committee Member, EAC Accreditation Task Force of Faculty of Chemical

Engineering, UTM. � Committee Member, Academic Publications of Faculty of Chemical

Engineering, UTM. � Editor-in-Chief, Annual Report of Faculy of Chemical Engineering, UTM � Invited Lecturer, Faculty of Chemical Engineering and Energy Sustainability,

Universiti Malaysia Sarawak (UNIMAS) � Trainer, Executive Diploma Petroleum & Gas Technology, Universiti Malaysia

Pahang (UMP) � Executive Member, 6th. International Conference on Process Systems

Engineering (PSE Asia 2013). � Editor, ASEAN Journal of Engineering Education (AJEE). � Coordinator, Master of Chemical Engineering (Mixed Mode) Program, UTM. � Committee Member, Society of Engineering Education Malaysia (SEEM).



� Web Manager, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU).

� Teaching Assistant, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU).

� Web Manager, Faculty of Chemical and Natural Resources Engineering (FKKKSA), UTM.

� Member, Problem-Based Learning and Cooperative Learning Task Force, UTM. � Member, Committee of Malaysian Journal of Engineering Education.

Date Appointed:

� 21st. Jul. 2003: Appointed as a Tutor. � 12th. Jul. 2004: Appointed as a Lecturer. � 20th. Apr. 2006: Confirmation status as a UTM permanent staff. � 01st. Jul. 2013: Appointed as a Senior Lecturer. � 26th. Sept. 2011: Appointed as an R&D Manager of PROSPECT � 01st. Sept. 2012: Appointed as a Centre of Excellence Member � 01st. May 2014: Appointed as an R&D Manager of PROSPECT � 11th. May 2015: Appointed as a Fellow Researcher at PROSPECT, RISE � 01st. Aug. 2015: Appointed as an IT & Marketing Manager of PROSPECT

At International Level. 23. Jury, Indonesia Chem E-Car Competition (ICECC) Chemical Engineering Innovation Festival

(CHERNIVAL) 2017. Surabaya, Indonesia, April 20-23, 2017.

22. Reviewer, 8th. International Conference on Applied Energy (ICAE2017). Cardiff, UK, August 21-24, 2017.

21. Reviewer, 8th. International Conference on Applied Energy (ICAE2016). Beijing, China, October 8-11, 2016.

20. Deputy Chairman, The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016)

19. Reviewer, The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016)

18. Committee, 2nd. Probiorefine Workshop. IBD, UTM Johor Bahru. Dec 7-8, 2015.

17. Committee, 18th. PRES 2015 – Conference Process Integration, Modelling & Optimisation for Energy Saving and Pollution Reduction. Kuching, Sarawak. Aug 22-27, 2015.

16. Reviewer, 12th International Conference on Chemical and Process Engineering (ICheaP-12), Milan, Italy. May 19-22, 2015.

15. Reviewer, 7th. International Conference on Applied Energy (ICAE2015). Abu Dhabi, Mar. 28 – 31, 2015.

14. Reviewer, International Conference on Mathematics, Engineering & Industrial Applications (ICoMEIA 2014)

13. Editor, ASEAN Journal of Engineering Education (AJEE).

12. Reviewer, Chemical Engineering Transactions.

11. Reviewer, Journal of Transactions on Industrial Electronics.

10. Reviewer, 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5, 2013.

9. Reviewer, 6th. International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur.

8. Reviewer, 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia.



7. Web Manager, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Jul. 2007 – Apr. 2011.

(Responsible for maintaining and updating website of CAPEC, DTU).

6. Teaching Assistant, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Jul. 2007 – Apr. 2011.

5. Reviewer, 38th. ASEE/IEEE Frontiers in Education Conference. Oct. 22 – 25, 2008. Saratoga Springs, NY USA.

4. Reviewer, 37th. ASEE/IEEE Frontiers in Education Conference. Oct. 10 – 13, 2007. Milwaukee, WI USA.

3. Reviewer, 36th. ASEE/IEEE Frontiers in Education Conference. Oct. 28 – 31, 2006. San Diego, CA USA.

2. Committee Member, 1st. International Conference on Natural Resources and Technology (INRET 2006), Putrajaya Malaysia. July 2006.

1. Committee Member, Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, Malaysia. Dec 2005.

At National Level.

8. Director, American Chemistry Society (ACS) Southern Malaysia

7. Facilitator, HIP International Outreach English Camp 2017. Membakut, Sabah, July 29-30, 2017

6. District Liason Officer, Institut Inovasi Strategik Johor (IISJ) – Kulai

5. R&D Manager, Sabah English Aspiration Society (SEAS)

4. Reviewer, Jurnal Teknologi (Science and Engineering).

3. Reviewer, e-Journal of PERINTIS (eJPERINTIS).

2. Committee Member, Society of Engineering Education Malaysia (SEEM). 28 April 2011 – 27 April 2012.

1. Committee Member, Malaysian Journal of Engineering Education. 2006 – June 2007.

At University Level. 13. Member, Universiti Teknologi Malaysia Shine Team (UTMShine)

12. Fellow Researcher, Process Systems Engineering Centre (PROSPECT), Research Institute for Sustainable Environment (RISE), UTM. 11 May 2015 – 10 May 2018.

11. Trainer, Executive Diploma Petroleum & Gas Technology, Universiti Malaysia Pahang (UMP)

10. Invited Lecturer, Modern Trends of Process Control, Faculty of Chemical Engineering and Energy Sustainability, Universiti Malaysia Sarawak (UNIMAS). 18 Dec. 2015.

9. Invited Lecturer, Process Simulation and Optimization Using Aspen HYSYS, Faculty of Chemical Engineering and Energy Sustainability, Universiti Malaysia Sarawak (UNIMAS). 25 Mar 2015.

8. Examiner, UTM Research University Grants Proposal (Tier 1 & Encouragement Grant). 4 Dec. 2014.

7. Advisor, UTM Chem-E-Car Competition. 22 Mar. 2014.

6. Examiner, UTM Research University Grants Proposal (Tier 1 & Encouragement Grant). 19 Mar. 2014.

5. Full Research Member of Centre of Excellence (COE), Process Systems Engineering Centre (PROSPECT) UTM. 1 Sept. 2012 – 31 Aug. 2015.

4. R&D Manager, Process Systems Engineering Centre (PROSPECT) UTM. 26 Sept. 2011 – 25 Sept. 2013.



3. Evaluator, Technical Proposal of ERGS, ScienceFund and RUGS for Sustainability Research Alliance.

2. Advisor, Perwakilan Mahasiswa Sabah (PERMAS), UTM. 2004 – July 2007.

1. Member, Problem-Based Learning and Cooperative Learning Task Force, UTM. 2004 – July 2007.

At Faculty Level. 28. Trainer, Distillation Operation, Control & Troubleshooting, Insititute of Bioproduct Development (IBD)

27. Trainer, Process Operation, Control & Troubleshooting, Insititute of Bioproduct Development (IBD)

26. Judge, Energy Sustainability Awareness Campaign (ESAC 2015). Faculty of Chemical and Energy Engineering. 16 Dec. 2015.

25. Fasilitator, FRGS Proposal Writing Workshop. 31 May 2015.

24. Committee Member, Campus Sustainability (CS) FChE Global Plant Task Force. 1 Mar 2015 – 29 Feb. 2016.

23. Committee Member, Research, Innovation, Commercialisation & Entrepreneurial (RICE) FChE Global Plant Task Force. 1 Mar 2015 – 29 Feb. 2016.

22. Committee Member, EAC Accreditation Task Force. 1 Jan 2015 – 31 Dec. 2016.

21. Committee Member, FKK Academic Publication. 1 Jan 2015 – 31 Dec. 2016.

20. Invited Speaker, Process Simulation Seminar. 21 Mar. 2014

19. Invited Speaker, Distillation Column Design Seminar. 2 Mar. 2014

18. Invited Speaker, Research Methodology Seminar. 16 Apr 2014

17. Editor-in-Chief, FKK Annual Report 2012 – 2013.

16. Committee Member, FKK Academic Publication. 10 Jan 2012 – 9 Jan 2014.

15. Committee Member, EAC Report Preparation Team. 25 May 2011 – 31 July 2013.

14. Committee Member, Emergency Action Plant Team. 6 May 2011 – 5 May 2013.

13. Auditor, Faculty 5S Practices. 11 Jul 2012.

12. Chairman, Jawatankuasa Kebajikan, Sukan dan Sosial (JAKSIS). 1 Jan – 31 Dec 2012.

11. Program Coordinator, Master of Chemical Engineering (Mixed Mode). 2 Jan 2012 – 1 Jan 2013.

10. Fasilitator, English Class for Supporting Staff, Faculty of Chemical Engineering. 5 Sept. 2011 – 4 Sept. 2012.

9. Manager, Volleyball Man Team for the UTM Inter-Department Sport Carnival . 4 – 27 Apr. 2007.

8. Webmaster, Faculty of Chemical and Natural Resources Engineering. August 2006 - July 2007.

7. Editor/Designer, Buletin FKKKSA, Faculty of Chemical and Natural Resources Engineering. 2005 – Jun 2007.

6. Head, Publicity Section, JawatanKuasa Kebajikan dan Rekreasi Staff (JAKRIS), FKKKSA. 2005 – Jun 2007.

5. Organizing Committee, “Kejohanan Futsal Tertutup FKKKSA 2005” organized by JAKRIS. 18 July 2005.

4. Organizing Committee, FKKKSA Sport Carnival 2004 organized by JAKRIS. 16 Aug-15 Sept 2004.

3. Organizing Committee, Sambutan Bulan Kemerdekaan ke-47 dan Kempen Mengibar Jalur Gemilang di FKKKSA. 1-31 August 2004.

2. Member, Faculty Quality Assurance Committee, Group 3 Section 5 and 6. 15 Jan 2004-15 Jan 2005.

1. Chairman, FKKKSA Post Graduate Society for Session 2003/2004.



At Department Level. 15. Member, EAC Self-Assessment Report (SAR) Committee, Department of Chemical Engineering

14. Course Owner, SKTK 3564 Process Control & Instrumentation

13. Course Owner, SKTK 4751 Process Control Laboratory

12. Head, Panel of Process Control & Safety, Department of Chemical Engineering

11. Academic Advisor, for 3rd. Year Chemical Engineering Student – 2017.

10. Academic Advisor, for 2nd. Year Chemical Engineering Student – 2016.

9. Academic Advisor, for 1st. Year Chemical Engineering Student – 2015.

8. Supervisor, Industrial Training. 22 Jul – 4 Sept 2015.

7. Course Owner, SKKK3144: Process Control and Instrumentation. 1 Jan 2013 – 31 Dec 2017.

6. Academic Advisor, for 4th. Year Chemical Engineering Student – 2014.

5. Academic Advisor, for 3rd. Year Chemical Engineering Student – 2013.

4. Academic Advisor, for 2nd. Year Chemical Engineering Student – 2012.

3. Academic Advisor, for 1st. Year Chemical Engineering Student – 2011.

2. Secretariat, Quality Assurance Task Force, Chemical Engineering Department. 2005 – Jun 2007.

1. Marketing Manager, External Relation Task Force, Chemical Engineering Department. 10 Apr. 2005 - 9 Apr. 2006.

CAREER PATH & EXPERIENCE Feb 2017 – Now IT & Marketing Manager, Process Systems Engineering Centre (PROSPECT),

UTM

Feb 2016 – Jan 2017 Trainee Engineer, Lahad Datu Edible Oils Sdn. Bhd.

Aug 2015 – Feb 2016 IT & Marketing Manager, Process Systems Engineering Centre (PROSPECT), UTM

May 2014 – Aug 2015 R&D Manager, Process Systems Engineering Centre (PROSPECT), UTM

Sept 2012 – Aug 2015 COE Member, Office of Deputy Vice-Chancellor of Research and Innovation

Aug 2011 – Sept 2013 R&D Manager, Process Systems Engineering Centre (PROSPECT), UTM

Jul 2011 – Now Senior Lecturer, Department of Chemical Engineering, UTM

May 2011 – Jun 2011 Lecturer, Department of Chemical Engineering, UTM.

Jul. 2007 – Apr. 2011 PhD. Student, Technical University of Denmark.

Jul. 2004 – Jul. 2007 Lecturer, Department of Chemical Engineering, UTM

Jul. 2003 – Jul. 2004 Tutor, Department of Chemical Engineering, UTM.

2002 – 2003 Research Officer, Chemical & Biotechnology Focus Group, Research Management Center, UTM.

2001 – 2002 M.Eng. Student, Universiti Teknologi Malaysia.

Apr. – May 2001 Trainee Engineer, Chemical Engineering Pilot Plant (CEPP), UTM.



RESEARCH ACTIVITIES (I have been a researcher in various projects. Some are R&D based and some commercialization based. This is important to keep up-to-date and in trend with the advancement of the latest science and technology and later, it is as important that we know how to commercialize the product of the developed research). Total Projects: 39 (RM2,722,969); Principal Investigator: 7 projects (RM312, 000); Project Member: 25 projects (RM1,834,087); Contract research: 7 projects (RM576,882) PUBLIC FUNDINGS (from government agencies) Principal Investigator 7. Title: A New Framework for Analyzing Sustainability of Energy Efficient Distillation Columns

Sequence. Sponsor: UTM Research University Grant (RUG) Flagship (RM50,000). Cost Centre No.: Q.J130000.2446.03G68. Period: 1 Dec 2016 – 30 Nov 2018. Status: On-going

6. Title: A Tool for Predicting Refined Bleached Deodorized Palm Oil (RBDPO) Quality using Partial Least Squares Regression (PLSR). Sponsor: UTM Research University Grant (RUG) Tier 1 (RM49,900). Cost Centre No.: Q.J130000.2546.12H67. Period: 15 Dec. 2015 – 14 Mei. 2017. Status: Completed with progress and final report.

5. Title: Thermodynamic Study of Driving Force and Energy Integration Characterization for Energy Efficient Natural Gas Liquids Fractionation Process. Sponsor: Ministry of Education, Fundamental Exploratory Research Scheme Grant (RM84,100). Cost Centre No.: R.J130000.7809.4F435. Period: 15 July 2014 – 31 Dec. 2015. Status: Completed with progress and final report.

4. Title: A New Tool for Designing Energy Efficient Distillation Columns. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM40,000). Cost Centre No.: R.J130000.2509.07H39. Period: 1 April 2014 – 30 Sept. 2015. Status: Completed with progress and final report.

3. Title: A New Model-Based Tool for Flexible and Operable Heat Exchanger Network. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM46,000). Cost Centre No.: R.J130000.7844.4L036. Period: 15 June 2012 – 14 June 2014. Status: Completed with progress and final report.

2. Title: Sustainable Integrated Process-Controller Design of Distillation Systems. Sponsor: UTM Research University Grant (RUG) Tier 2 (RM22,000). Cost Centre No.: Q.J130000.2644.06J30. Period: 1 May 2012 – 30 April 2013. Status: Completed with progress and final report.

1. Title: Sustainable Integrated Process-Controller Design of Reactor Systems. Sponsor: UTM Research University Grant (RUG) New Academic Staff (NAS) (RM20,000). Cost Centre No.: R.J130000.7744.4P051. Period: 1 May 2012 – 30 April 2013. Status: Completed with progress and final report.

Project Member 25. Title:.Integrated Industrial Site Planning for Minimizing Resource Utilization and Pollution.



Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM115,000). Cost Centre No.: R.J130000.7809.4F918. Period: 1 Jun 2017 – 31 May 2019. Status: On-going. Leader: Sharifah Rafidah Wan Alwi

24. Title:.Refined Bleached Deodorised Palm Oil (RBDPO) Quality Prediction Tool Using Principal

Component Analysis (PCA). Sponsor: UTM Research University Grant (RUG) Tier 2 (RM20,000). Cost Centre No.: Q.J130000.2646.12J39. Period: 1 Oct 2016 – 31 Dec 2017. Status: On-going. Leader: Kamarul Asri Ibrahim.

23. Title:.Production Decision Support System for Batch Processes.

Sponsor: UTM Research & Development Fund (RM20,000). Cost Centre No.: R.J130000.7709.4J233. Period: 1 Jul 2016 – 30 Sept 2017. Status: Ended. Leader: Sharifah Rafidah Wan Alwi.

22. Title:. Determination of Mixing Time for Homogeneous Mixing of Different Grades of Liquified

Petroleum Gas (LPG) in a non-Stirred Tank. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM45,620). Cost Centre No.: Q.J130000.2546.14H48. Period: 1 Jul 2016 – 30 Jun 2018. Status: On-going. Leader: Norazana Ibrahim.

21. Title:. Development.of Online System: Shipping Emissions Accounting (SEA) and Emissions

Improvement Measures (EIM) for Port of Tanjung Pelepas Sponsor: Lembaga Pelabuhan Johor (RM80,000). Cost Centre No.: R.J130000.7309.4B226. Period: 1 Apr 2016 – 31 Dec 2016. Status: On-going. Leader: Sharifah Rafidah Wan Alwi.

20. Title:. An Integrated Pinch Analysis Framework for Low Carbon Industrial Site Planning.

Sponsor: UTM Research University Grant (RUG) Flagship (RM50,000). Cost Centre No.: Q.J130000.2409.03G40. Period: 15 Jan 2016 – 14 Jan 2018. Status: On-going. Leader: Sharifah Rafidah Wan Alwi.

19. Title:. Deodoriser Troubleshooting in Palm Oil Refining using Fuzzy Logic.

Sponsor: Ministry of Science, Technology and Innovation (MOSTI) E-Science Grant (RM100,000). Cost Centre No.: R.J130000.7909.4S130. Period: 1 Nov 2015 – 31Oct 2017. Status: On-going. Leader: Khairiyah Mohd. Yusof.

18. Title:.A New Framework for Designing Optimal Heat Exchanger Network Considering Inherent Safety and Operability Aspects. Sponsor: UTM Research University Grant (RUG) Matching Grant (RM37,200). Cost Centre No.: Q.J130000.3009.00M77. Period: 1 Aug 2015 – 31Jul 2017. Status: Ended. Leader: Sharifah Rafidah Wan Alwi.

17. Title:.Industrial Waste Water Minimization Along Sungai Johor Basin.



Sponsor: UTM Research University Grant (RUG) Flagship (RM35,000). Cost Centre No.: Q.J130000.2409.03G13. Period: 1 Mar 2015 – 28 Feb 2016. Status: Completed with progress and final report. Leader: Sharifah Rafidah Wan Alwi.

16. Title:.Physico-chemical properties study and Phenolic recovery analysis of Malaysia’s biomasses derived pyrolysis oil. Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM72,900). Cost Centre No.: R.J130000.7842.4F654. Period: 1 Dec 2014 – 30 Nov 2016. Status: Completed with progress and final report. Leader: Norazana Ibrahim.

15. Title:. Flash Pyrolysis of Malaysia’s Biomasses for Potential Production of Bio-Fuels. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM65,556). Cost Centre No.: Q.J130000.2542.07H10. Period: 1 Apr 2014 – 31 Mar 2016. Status: Completed with progress and final report. Leader: Norazana Ibrahim.

14. Title:. Total Site Heat Integration for Continuous and Variable Supply and Demand System. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM55,000). Cost Centre No.: Q.J130000.2509.07H35. Period: 1 Apr 2014 – 31 Mar 2015. Status: Completed with progress and final report. Leader: Sharifah Rafidah Wan Alwi.

13. Title:. Current Status of Green Growth in Organisation of Islamic Conference (OIC) Countries. Sponsor: UTM Research University Grant (RUG) Matching Grant (RM84,480). Cost Centre No.: Q.J130000.3044.00M20. Period: 1 May 2014 – 30 Apr 2016. Status: Completed with progress and final report. Leader: Zainuddin Abdul Manan.

12. Title: Experimental and Numerical Analysis on Turbulent Flame Acceleration Characteristics and Behaviour in Pipe. Sponsor: Ministry of Education, Fundamental Research Grant Scheme (RM89,000). Cost Centre No.: R.J130000.7842.4F330. Period: 16 Dec 2013 – 15 Dec 2015. Status: Completed with progress and final report. Leader: Rafiziana Md Kasmani.

11. Title: The Solubility of Misai Kucing Herbs in Solvents via a Combined Experimental and Modeling Approach. Sponsor: Ministry of Education, Fundamental Research Grant Scheme (RM94,500). Cost Centre No.: R.J130000.7844.4F270. Period: 16 Dec 2013 – 15 Dec 2015. Status: Ended. Leader: Zainuddin Abd Manan.

10. Title:. MyPROS: A New Bench-Scale Flash Pyrolysis Technology for Bio-Oil Production from Malaysia’s Biomasses. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM109,000). Cost Centre No.: R.J130000.7842.4L128. Period: 1 Jun 2013 – 31 May 2015. Status: Completed with progress and final report. Leader: Norazana Ibrahim.

9. Title:. Computer-Aided Tool for Designing Operable, Flexible and Inherently Safer-Healthier Chemical



Reactor System. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM84,000). Cost Centre No.: R.J130000.7844.4L106. Period: 1 Jun 2013 – 31 May 2015. Status: Completed with progress and final report.. Leader: Mimi Haryani Hassim.

8. Title:. An Integrated, Sustainable Palm Oil Production Supply Chain. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM115,000). Cost Centre No.: Q.J130000.2544.03H55. Period: 1 Dec 2012 – 31 Dec 2014. Status: Completed with progress and final report. Leader: Zainuddin Abdul Manan.

7. Title:. Study of flame acceleration and deflagration to detonation transition in process piping. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM120,591). Cost Centre No.: Q.J130000.2542.03H41. Period: 1 Dec 2012 – 31 Dec 2014. Status: Completed with progress and final report. Leader: Rafiziana Md. Kasmani.

6. Title:. A Kinetic Model for Production of Biofuels of Malaysia’s Biomasses via Flash Pyrolysis. Sponsor: UTM Research University Grant (RUG) Tier 2 (RM33,00). Cost Centre No.: Q.J130000.2642.05J10. Period: May 2012 – April 2013. Status: Completed with progress and final report. Leader: Norazana Ibrahim.

5. Title:.Thermogravimetric and Elemental Analyses Studies of Malaysia’s Biomasses for Production of Biofuels via Flash Pyrolysis. Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM76,780). Cost Centre No.: R.J130000.7842.4F129. Period: 1 April 2012 – 31 March 2014. Status: Completed with progress and final report. Leader: Norazana Ibrahim.

4. Title: Transforming Learning and Teaching in Higher Education: Developing Innovative Evidence-based Techniques for Transferring Skills in Effective Implementation of Cooperative Problem-Based Learning (CPBL) Among Lecturers. Sponsor: ERGS (RM 50,000). Period: 2011 - 2013. Status: Completed with progress and final report. Leader: Khairiyah Mohd. Yusof.

3. Title: Sustainable Integrated Product-Process Design and Control for a Tailor-Made Green Diesel Process. Sponsor: UTM Research University Grant (RUG) Flagships (RM75,160). Cost Centre No.: Q.J130000.2444.00G52. Period: August 2011 – July 2014. Status: Completed with progress and final report. Leader: Zainuddin Abd. Manan.

2. Title: Development of Syllabus and Environment for Learning of Problem-Based Learning in the First Year Students. Sponsor: DPP UTM RM 5,000. Period: 2006. Status: Completed with progress and final report. Head: Khairiyah Mohd. Yusof.

1. Title: Development of On-line Process Fault Detection Software for Oleochemical Plant.



Sponsor: IRPA RM 201,300 (Vot 74015). Period: 2002 – 2005. Status: Completed with progress and final report. Head: Mohamed Wijayanuddin Ali.

PRIVATE FUNDINGS (including contract research and consultancies) 7. Title: In-house training on advance pinch technology for maximising total site energy and utility cost

having. Sponsor: Optimal Systesm Engineering Sdn. Bhd. (RM32,000). Cost Centre No.: R.J130000.7644.4C071. Period: 12 – 13 Oct. 2015. Status: Completed. Leader: Zainuddin Abd Manan.

6. Title: Establish the Accounting Mehod for Ship Emissions. Sponsor: Lembaga Pelabuhan Johor. (RM40,000). Cost Centre No.: R.J130000.7644.4C071. Period: 1 Jan. – 30 Jun. 2015. Status: Completed. Leader: Zainuddin Abd Manan.

5. Title: Design Gap Analysis for Fractionation and Distillation Plants Works. Sponsor: Evyap Sabun Malaysia Sdn. Bhd. (RM24,800). Reference: UTM/224/ESM/1014(Rev.1) Period: 15 Oct. – 15 Nov. 2014. Status: Completed. Leader: Zainuddin Abd Manan.

4. Title: Design and Optimization of Modernization and Efficient Operation of Energy Supply and Utilization Systems using Renewable Energy Sources and ICTs. Sponsor: University of Pannonia, Hungary (RM31,132). Cost Centre No.: R.J130000.7644.4C061. Period: 1 July 2014 – 30 Jun. 2015. Status: Completed. Leader: Zainuddin Abd Manan.

3. Title: HAZOP Consultation and Discussion and CADWorks Consultation and Software License Rental. Sponsor: Evyap Sabun Malaysia Sdn. Bhd. (RM148,750). Reference: UTM/001/EVYAP/0913 Period: 30 Sept. 2013 – 29 Dec. 2013. Status: Completed. Leader: Zainuddin Abd Manan.

2. Title: Draft-1 of the Green Technology Blueprint for the OIC Member Countries. Sponsor: Islamic Development Bank (RM211,200). Cost Centre No.: R.J130000.7344.4B116. Period: 01 Sept. 2013 – 28 Feb. 2014. Status: Completed. Leader: Zainuddin Abd Manan.

1. Title: Retrofit of Shell MDS Plant for Utility Conservation using Pinch Analysis.

Sponsor: Shell MDS (M) Sdn. Bhd. (SMDS) (RM95,000). Cost Centre No.: Vot 671. Status: Completed. Leader: Zainuddin Abd Manan.

POSTGRADUATE PROJECTS 2. Position: PhD. Student.



Title: Integration of Modelling, Design and Control for Efficient Operation of Chemical Processes. Sponsor: Malaysian MOHE and UTM Scholarships (Technical University of Denmark PhD. Project). Period: 2007 – 2010. Status: Completed. Supervisors: Rafiqul Gani and Gurkan Sin.

1. Position: M.Eng. Student. Title: Multiple Faults Detection using Artificial Neural Networks. Sponsor: UTM/PTP Scholarships (Universiti Teknologi Malaysia M.Eng. Project). Period: 2001 – 2002. Status: Completed. Supervisor: Arshad Ahmad.

INTELLECTUAL PROPERTY RIGHTS (IPR) Total IPRs: 13; Copyrights (13) Copyrights 13. Mohd. Yusof, K., Hamid, M. K. A., Mustaffa, A. A., Zakaria, Z. Y. (2015). Case Study – Production

of Propylene Glycol in CHEM-TEX (M) Sdn. Bhd. (UTM.J.14.01/27.13/1JLD90(44) – 4/8/2015.

12. Hamid, M. K. A. and Ibrahim, N. (2015). Algorithm for Synthesizing Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process (UTM.J.14.01/27.13/1JLD85(35) – 26/3/2015.

11. Hamid, M. K. A. and Ibrahim, N. (2014). Algorithm for Synthesizing Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process (UTM.J.14.01/27.13/1JLD78(71) – 30/12/2014.

10. Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control Algorithm for a Distillation Column (UTM.J.14.01/27.13/1JLD78(72) – 30/12/2014.

9. Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control Algorithm for an Extractive Distillation Column (UTM.J.14.01/27.13/1JLD78(70) – 30/12/2014.

8. Hamid, M. K. A. (2014). Teaching Material for Introduction to Process Control (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

7. Hamid, M. K. A. (2014). Teaching Material for Control of Chemical Processes (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

6. Hamid, M. K. A. (2014). Teaching Material for Development of Mathematical Model (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

5. Hamid, M. K. A. (2014). Teaching Material for Laplace Transform (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

4. Hamid, M. K. A. (2014). Teaching Material for Transfer Function (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

3. Hamid, M. K. A. (2014). Teaching Material for Response of First Order Systems (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

2. Hamid, M. K. A. (2014). Teaching Material for Second Order Systems (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.

1. Hamid, M. K. A. (2014). Teaching Material for Dynamic Response Characteristics of More Complicated Systems (UTM.J.14.01/27.13/1JLD67(9) – 20/7/2014.



TEACHINGS ACTIVITIES (Most of my teaching loads since 2003 have been concentrated on Process Control and Dynamics subjects. However, I am also taking part in teaching other subjects.) Total Subjects: 56; M.Sc.: 12 subjects; Bachelor : 35 subjects; Bachelor Part-time: 6 subjects; Diploma: 3 subjects Total Credit Hours: 156; M.Sc.: 39; Bachelor : 88; Bachelor Part-time: 21; Diploma: 8 Total Credit Hours (minus lab and projek sarjana muda): 145 M.Sc. Process Plant Management 9. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2015/2016 (Kuala Lumpur) Credit: 3 hours 8. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2015/2016 (Kerteh) Credit: 3 hours 7. Subject: MKKL1133 Process Operation, Control and Troubleshooting Semester: II 2014/2015 (Kuala Lumpur) Credit: 3 hours 6. Subject: MKKL 1133 Process Operation, Control and Troubleshooting Semester: I 2014/2015 (Kerteh) Credit: 3 hours 5. Subject: MKKL 1133 Process Operation, Control and Troubleshooting Semester: I 2014/2015 (Kuala Lumpur) Credit: 3 hours 4. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2013/2014 (Kerteh) Credit: 3 hours 3. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2013/2014 (Kuala Lumpur) Credit: 3 hours 2. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2013/2014 (Kerteh) Credit: 3 hours 1. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2013/2014 (Kuala Lumpur) Credit: 3 hours M.Sc. (Chem. Eng.) DTU 3. Subject: 28451 Optimizing Plantwide Control (Teaching Assistant).

Semester: Spring 2010. Credit: 4 hours

2. Subject: 28852 Risk Assessment in Chemical and Biochemical Industry (Teaching Assistant). Semester: Spring 2009. Credit: 4 hours

1. Subject: 28350 Process Design: Principles and Methods (Teaching Assistant). Semester: Spring 2008. Credit: 4 hours

B.Eng. (Chemical) UTM 35. Subject: SKTK 1523 Introduction to Engineering (Section 04).

Semester: I 2017/2018. Credit: 3 hours 34. Subject: SKTK 1511 Industrial Seminar and Profession (Section 05).

Semester: I 2017/2018. Credit: 1 hour 33. Subject: SKKK 3144 Process Control and Instrumentation (Section 05).



Semester: II 2016/2017. Credit: 4 hours 32. Subject: SKKK 2133 Chemical Engineering Computation (Section 04).

Semester: I 2015/2016. Credit: 3 hours 31. Subject: SKKK 3144 Process Control and Instrumentation (Section 03).

Semester: II 2014/2015. Credit: 4 hours 30. Subject: SKKK 1023 Introduction to Engineering (Section 02).

Semester: I 2014/2015. Credit: 3 hours

29. Subject: SKKK 3144 Process Control and Instrumentation (Section 05). Semester: II 2013/2014. Credit: 4 hours

28. Subject: SKF 3143 Process Control and Dynamics (Section 05). Semester: II 2013/2014. Credit: 3 hours

27. Subject: SKKK 2133 Chemical Engineering Computation (Section 05). Semester: I 2013/2014. Credit: 3 hours

26. Subject: SKF 3413 Process Control and Dynamics (Section 06) Semester: II 2012/2013. Credit: 3 hours

25. Subject: SKKK 2133 Chemical Engineering Computation (Section 07). Semester: I 2012/2013. Credit: 3 hours

24. Subject: SKF 4761 Process Control Laboratory (Section 05). Semester: II 2011/2012. Credit: 1 hour

23. Subject: SKF 3413 Process Control and Dynamics (Section 06) Semester: II 2011/2012. Credit: 3 hours

22. Subject: SKF 4761 Process Control Laboratory (Section 07). Semester: I 2011/2012. Credit: 1 hour

21. Subject: SKF 4761 Process Control Laboratory (Section 06). Semester: I 2011/2012. Credit: 1 hour

20. Subject: SKKK 1013 Statics. Semester: I 2011/2012. Credit: 3 hours

19. Subject: SKKK 1011 Seminar. Semester: I 2011/2012. Credit: 1 hour

18. Subject: SKC 4824 Plant Design Project. Semester: II 2006/2007. Credit: 4 hours

17. Subject: SKC 5771 Process Control Laboratory. Semester: II 2006/2007. Credit: 1 hour

16. Subject: SKF 3413 Process Control and Dynamics. Semester: II 2006/2007. Credit: 3 hours

15. Subject: SKC 5771 Process Control Laboratory. Semester: I 2006/2007. Credit: 1 hour

14. Subject: SKC 4113 Process Control and Dynamics. Semester: I 2006/2007. Credit: 3 hours

13. Subject: SKC 4113 Process Control and Dynamics.



Semester: II 2005/2006 Section 04. Credit: 3 hours

12. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2005/2006 Section 02. Credit: 3 hours


10. Subject: SKC 4826 Plant Design Project. Semester: I 2005/2006. Credit: 6 hours

9. Subject: SKC 5771 Process Control Laboratory. Semester: I 2005/2006 Section 03. Credit: 1 hour

8. Subject: SKC 5771 Process Control Laboratory. Semester: I 2005/2006 Section 01. Credit: 1 hour

7. Subject: SKC 4821 Computer-Aided Design. Semester: II 2004/2005. Credit: 1 hour


5. Subject: SKC 4826 Plant Design Project. Semester: I 2004/2005. Credit: 6 hours

4. Subject: SKC 5771 Process Control Laboratory. Semester: I 2004/2005. Credit: 1 hour

3. Subject: SKC 4113 Process Control and Dynamics. Semester: I 2004/2005. Credit: 3 hours


1. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2003/2004. Credit: 3 hours

Part Time B.Eng. (Chemical) – SPACE 6. Subject: SKF 3413 Process Control and Dynamics.

Semester: II 2013/2014. Credit: 3 hours

5. Subject: SKF 3413 Process Control and Dynamics. Semester: I 2011/2012. Credit: 3 hours

4. Subject: SKC 4826 Plant Design Project. Semester: II 2005/2006. Credit: 6 hours






Part Time Dip. Eng. (Chemical) – SPACE 3. Subject: DKK 3343 Gas Processing and Petroleum Refining Technology.

Semester: I 2006/2007. Credit: 3 hours

2. Subject: DKK 3352 Chemical Engineering Computation. Semester: II 2005/2006. Credit: 2 hours

1. Subject: DKK 3343 Gas Processing and Petroleum Refining Technology. Semester: I 2004/2005. Credit: 3 hours



SUPERVISION Total Supervision: 61 Students; Graduated: 5 PhD, 1 M.Phil, 11 M.Eng., 31 B.Eng.; Ongoing: 9 PhD, 4 M.Phil. Postgraduate Research Projects Main Supervisor – PhD (Chemical Engineering) 8. Student: Muhammad Afiq bin Zubir.

Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD (ChemE). Title: Synthesis and Design Framework of Energy Efficient Distillation Based Separation Processes. Status: Ongoing, Sep. 2016 – Now.

7. Student: Munawar Zaman bin Shahruddin.

Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD (ChemE). Title: A New Framework for a Flexible and Operable Heat Integrated Distillation Columns Sequence. Status: Ongoing, Sep. 2016 – Now.

6. Student: Taram Satiraksa bin Wan Abdullah.

Co-Supervisor: Ramlan bin Abd. Aziz Degree: PhD Industry (ChemE) – Company: Vestigo Petroleum Sdn. Bhd. Title: Embrace Living Safety Concepts in the Prevention of Company’s Process Safety Incident. Status: Ongoing, Feb. 2015 – Now.

5. Student: Ahmad Nafais bin Rahimi. Co-Supervisor: Kamarul Asri bin Ibrahim, Norazana binti Ibrahim Degree: PhD (ChemE). Title: Process Design and Control Analysis of Energy Efficient Distillation Columns Sequence. Status: Ongoing, Feb. 2015 – Now.

4. Student: Azmer bin Shamsuddin. Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD Industry (ChemE) – Company: Lahad Datu Edible Oils Sdn. Bhd.. Title: Refined Bleached Deodorised Palm Oil Product Quality Prediction Tool Using Statistical Methods. Status: Ongoing, Feb. 2014 – Now.

3. Student: Suraya Hanim binti Abu Bakar. Co-Supervisor: Sharifah Rafidah binti Wan Alwi. Degree: PhD (ChemE). Title: Flexible and Operable Heat Exchanger Networks. Status: Graduated, Feb. 2012 – Apr 2016.

2. Student: Hamid Kazemi Esfeh. Degree: PhD (ChemE). Title: A Systematic Modeling and Design Optimization Framework for Proton Exchange Membrane Electrolyzer. Status: Graduated, Feb. 2012 – Jan 2015.

1. Student: Vahid Akbari Baghbani. Degree: PhD (ChemE). Title: A Systematic Modeling and Design Optimization Framework for Fluidized Bed Polymerization Reactor. Status: Graduated, Aug. 2011 – Oct. 2014.

Main Supervisor – M.Eng (Chemical Engineering)



7. Student: Nur Aqila binti Naseri. Degree: M.Phil (ChemE). Title: Synthesis and Design Framework of Energy Efficient Extractive Distillation System. Status: Ongoing, Sep. 2017 – Now.

6. Student: Faizul Hakim bin Elidor.

Degree: M.Phil (ChemE). Title: Synthesis and Design Framework of Energy Efficient Flash System. Status: Ongoing, Sep. 2017 – Now.

5. Student: Mohd Aiman bin Mohd Noor.

Co-Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil (ChemE). Title: Process Operation Improvement in Palm Oil Refining. Status: Ongoing, Sep. 2016 – Now.

4. Student: Muhammad Zakwan bin Zaine.

Co-Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil (ChemE). Title: Sustainable Energy Efficient Distillation Columns Sequence. Status: Graduated, Sep. 2014 – Nov 2016.

3. Student: Mohd Faris bin Mustafa. Co-Supervisors: Kamarul ‘Asri bin Ibrahim, Noor Asma Fazli bin Abd Samad (UMP). Degree: M.Eng (ChemE). Title: Energy Efficient Distillation Columns Sequence. Status: Graduated, Aug. 2013 – May 2015.

2. Student: Siti Aminah binti Zakaria. Co-Supervisor: Muhamad Rizza bin Othman (UMP). Degree: M.Eng (ChemE). Title: Sustainable Integrated Process Design and Control of Chemical Reactor Systems. Status: Graduated, Aug. 2013 – Apr. 2015.

1. Student: Mohamad Zulkhairi bin Nordin. Co-Supervisor: Muhamad Rizza bin Othman (UMP). Degree: M.Eng (ChemE). Title: Sustainable Integrated Process Design and Control of Distillation Column Systems. Status: Graduated, Aug. 2013 – Jun. 2015.

Main Supervisor – M.Eng (Chemical Engineering) – Mixed Mode and Taught Course 7. Student: Surentheran a/l Seragam

Degree: M.Eng (ChemE-Taught Course). Title: Application of Lean Six Sigma in the Oil and Gas Industry: Transplus Stripper Column Energy Optimization and Sustenence. Status: Graduated, Feb. 2016 – Aug 2017.

6. Student: Deepan Raj a/l Thangaraj

Degree: M.Eng (ChemE-Taught Course). Title: Optimization of Temperature Variation in Bioreactor Through Plate Heat Exchanger Using Process Control System. Status: Graduated, Feb. 2015 – Feb 2016.

5. Student: Nurul Akmar binti Mohd Zaberi.

Degree: M.Eng (ChemE-Taught Course). Title: Ethanolamines Column Optimization Study. Status: Graduated, Feb. 2013 – Feb. 2015.



4. Student: Hasnizam bin Abdullah. Degree: M.Eng (ChemE-Taught Course). Title: Wireless Spectrum Vibration Analysis for Remote Machinary over Multiple Communication Protocol. Status: Graduated, Feb. 2013 – Feb. 2015.

3. Student: Faizal bin Ahmad.

Degree: M.Eng (ChemE-Taught Course). Title: Fault Tolerant Instrumentations in Process Plant Two Out of Three Voting System and Middle of Three Control. Status: Graduated, Feb. 2013 – Feb. 2015.

2. Student: Ahmad Azamuddin bin Ahmad Azizi.

Degree: M.Eng (ChemE-Taught Course). Title: Evaluation of Batch Reactor Auxiliary Equipment Feasibility to Produce New Product Grade. Status: Graduated, Feb. 2013 – Feb. 2015.

1. Student: Sirajo Lawal.

Co-Supervisor: Muhd Nazrul Hisham bin Zainal Alam. Degree: M.Eng (ChemE-Mixed Mode). Title: Integrated Process Design and Control of a Microbioreactor. Status: Graduated, Sep. 2012 – Jun. 2013.

Co-Supervisor – PhD (Chemical Engineering) 6. Student: Nor Adhihah binti Rashid.

Supervisor: Kamarul Asri bin Ibrahim. Degree: PhD (ChemE). Title: Palm Oil Product Quality Prediction Tool Using Multivariate Statistical Methods. Status: On-going, Sept. 2016 – Now

5. Student: Muhammad Fakhrul Islam bin Zahran.

Supervisor: Kamarul Asri bin Ibrahim. Degree: PhD (ChemE). Title: Flexibility and Controllability Analyses of Energy Efficient Distillation Columns Sequence. Status: On-going, Sept. 2016 – Now

4. Student: Abdul Rasheed Abdul Rahman.

Supervisor: Noor Shawal bin Nasri. Degree: PhD (ChemE). Title: Modelling and Simulation of Gas Separation Processes for Gas Processing Plant. Status: On-going, Feb. 2016 – Now

3. Student: Ademola Bolanle Raheem.

Supervisor: Azman bin Hassan. Degree: PhD (ChemE). Title: Assessment of Potential Environmental Impact of Polyethylene Terephthalate (PET) Plastic Recycling. Status: On-going, Nov. 2013 – Now

2. Student: Tohid Nejad Ghaffar Borhani. Supervisor: Zainuddin bin Abd. Manan. Degree: PhD (ChemE). Title: Modelling and Simulation of Carbon Dioxide Removal by Using Promoted Potassium Carbonate Process. Status: Graduated, Jan. 2010 – Jun 2014

1. Student: Reza Marandi. Supervisor: Shahrir bin Hashim.



Degree: PhD (ChemE). Title: Computational Fluid Dynamic Simulation of Gas Phase Ethyelene Ploymerization Reactors. Status: Graduated, Jan. 2010 – Aug. 2014

Co-Supervisor – M.Eng (Gas Engineering) 1. Student: Noorhaza binti Alias.

Supervisor: Norazana binti Ibrahim. Degree: M.Eng. (Gas). Title: A New Bench-Scale Flash Pyrolysis technology for Bio-Oil Production from Malaysia’s Biomasses. Status: Graduated Aug. 2013 – Sept 2016.

Co-Supervisor – M.Phil (Chemical Engineering) 1. Student: Nur Atikah binti Mohd Rosely.

Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil. (ChemE). Title: Palm Oil Product Quality Prediction Tool Using Hybrid of Principal Component Analysis and Partial Correlation Analysis. Status: Ongoing, Sep. 2016 – Now.

Undergraduate Research Project – B.Eng.Chem.(Hons.) 31. Student: Amirul Afiq Hamizan bin M. Roslan

Title: Integration Tools for Supporting Process Design Analyses in Chemical Engineering. Status: Graduated, Feb. 2016 – Jan 2017.

30. Student: Yuhan Moh

Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Partial Correlation Analysis. Status: Graduated, Feb. 2016 – Jan 2017.

29. Student: Parakashwaran Nair

Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Singular Value Decomposition. Status: Graduated, Feb. 2016 – Jan 2017.

28. Student: Mohamad Hanafi bin Noslan

Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Principal Component Analysis. Status: Graduated, Feb. 2016 – Jan 2017.

27. Student: Siti Qazalinda binti Sepuan

Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Hotelling’s T2-Singular Value Decomposition. Status: Graduated, Feb. 2016 – Jan 2017.

26. Student: Nia Damiyathi binti Abdul Rawi

Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Hotelling’s T2-Principal Component Analysis. Status: Graduated, Feb. 2016 – Jan 2017.

25. Student: Faizul Hakim bin Elidor

Title: Steady State Sensitivity Analysis for Natural Gas Liquids Fractionation Sequences. Status: Graduated, Feb. 2015 – Jan 2016.

24. Student: Muhammad Alif Asyraf bin Amin

Title: Steady State Sensitivity Analysis for Hydrocarbon Mixture Separation Sequences. Status: Graduated, Feb. 2015 – Jan 2016.



23. Student: Nur Syamimi binti Jalil

Title: Steady State Controllability Analysis for Aromatic Separation Sequences. Status: Graduated, Feb. 2015 – Jan 2016.

22. Student: Muhammad Fakhrul Islam bin Zahran

Title: Steady State Controllability Analysis for Hydrocarbon Mixture Separation Sequences. Status: Graduated, Feb. 2015 – Jan 2016.

21. Student: Muhammad Fitri bin Saidi

Title: Steady State Controllability Analysis for Natural Gas Liquids Fractionation Sequences. Status: Graduated, Feb. 2015 – Jan 2016.

20. Student: Nur Atikah binti Mohd Rosely

Title: Steady State Controllability Analysis of Cryogenic Distillation Sequences for Natural Gas Purification. Status: Graduated, Feb. 2015 – Jan 2016.

19. Student: Aliudin bin Gotowo

Title: Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process. Status: Graduated, Feb. 2014 – Jan 2015.

18. Student: Mohd Firdaus bin Azizan

Title: Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Status: Graduated, Feb. 2014 – Jan 2015.

17. Student: Mohamad Faiz bin Mohd Yusoff

Title: Sustainable Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process. Status: Graduated, Feb. 2014 – Jan 2015.

16. Student: Mohamad Ridhuan bin Nawi

Title: Sustainable Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Status: Graduated, Feb. 2014 – Jan 2015.

15. Student: Mohamad Faizal bin Samsuddin

Title: Sustainable Energy Efficient Distillation Columns Sequence for Aromatics Separation Process. Status: Graduated, Feb. 2013 – Jan 2015.

14. Student: Mohamad Dzulfadzli bin Jais

Title: Sustainable Integrated Process Design and Control for a Distillation Column. Status: Graduated, Feb. 2012 – Jan. 2013.

13. Student: Mohamad Zulkhairi bin Nordin

Title: Sustainable Integrated Process Design and Control for an Extractive Distillation Column. Status: Graduated, Feb. 2012 – Jan. 2013.

12. Student: Mohd Jufri bin Zakaria

Title: Sustainable Integrated Process Design and Control for a Continuous Stirred Tank Reactor. Status: Graduated, Feb. 2012 – Jan. 2013.

11. Student: Siti Nasihah binti Mohd Ali

Title: Sustainable Integrated Process Design and Control for a Plug Flow Reactor. Status: Graduated, Feb. 2012 – Jan. 2013.

10. Student: Siti Aminah binti Zakaria

Title: Sustainable Integrated Process Design and Control for a Packed Bed Reactor. Status: Graduated, Feb. 2012 – Jan. 2013.



9. Student: Siti Norhanum binti Fadli Title: Simulation and Optimization of Diesel Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Apr. 2007.

8. Student: Muhammad Syafiq bin Adam

Title: Simulation and Optimization of Ethanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

7. Student: Cosmas bin Anjura

Title: Simulation and Optimization of Ethane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

6. Student: Mohammad Shahir bin Abdullah

Title: Simulation and Optimization of Butane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

5. Student: Mohd Badri Barid bin Abdullah

Title: Simulation and Optimization of Ethanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

4. Student: Nur Aifaa binti Azman

Title: Simulation and Optimization of Jet Fuel Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

3. Student: Farhana binti Aziz

Title: Simulation and Optimization of Gasoline Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

2. Student: Henry Insiong

Title: Simulation and Optimization of Propane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

1. Student: Azmil bin Abdul Rahman

Title: Simulation and Optimization of Methanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec. 2005 – Nov. 2006.

Undergraduate Plant Design Project Supervisions. 7. Students: Nur Emieylia Sulaiman, Sti Nadzwa Rosnan, Mohd Sukri Mohd Yusof and Siti Fatehah Ali

Ihsan. Degree: B.Eng. (Chemical) (Hons.) Title: Production of 100,000 MTA of Adipic Acid via Catalytic Oxidation. Status: Finished, Feb. 2014 – June. 2014.

6. Students: Ma Siew Voon, Siti Fatimah Meskam, Anis Syszwan Shuhaimi, Syed Nassrun Wafa Syed

Jalaluddin and Mohd Zaizuki Zainal. Degree: B.Eng. (Chemical) (Hons.) Title: Production of 1752 kMTA of RON97 Gasoline from Vacuum Gas Oil (VGO). Status: Finished, Feb. 2013 – June. 2013.

5. Students: Melvin Ng Eng Chen, Atiqah Abdul Aziz, Mohd Izzuddin Ahmad Shah and Surhanis Mohd

Sukri. Degree: B.Eng. (Chemical) (Hons.) Title: Oil Palm-Based B100 Grade Biodiesel Production. Status: Finished, Feb. 2012 – June. 2012.

4. Students: Mohd. Zulkifli Mohamad Noor, Mohd. Zamri Ayub, Nik Suryati Nik Kub, Aida Rohayu Azali

and Hamimah Satirah Mazlan. Degree: B.Eng. (Chemical) (Hons.)



Title: Production of 250,000 MTA High Octane Number of Gasoline from Liqufied Natural Gas. Status: Finished, Dec. 2006 – Apr. 2007.

3. Students: Rosli Ahmad, Mohd Zaki Saleh, Nurdin Darman and Nor Ratana Hapni

Degree: B.Eng. (Chemical) (Hons.) Title: Production of 250,000 MTA Hydrogen from Methanol. Status: Finished, Dec 2005 - April 2006.

2. Students: Lim Chew Ching, Norafidah Mohammed, Zainatul Bahiyah Handani, Siti Mazhaida

Mustapha and Hasniza Ibrahim Degree: B.Eng. (Chemical) (Hons.) Title: Production of 250,000 MTA Hydrogen from Liquefied Natural Gas. Status: Finished, Dec 2005 - April 2006.

1. Students: Ong Yoke Peng, Jusmaliza Emelia Ahmad, Khairun Nisah Abdul Kamadin, Mohd Khairul

Azman Khalif and Mohd Najib Roslan Degree: B.Eng. (Chemical) (Hons.) Title: Production of 50,000 MTA Fuel Grade Ethanol from Municipal Solid Waste. Status: Finished, Dec 2004 - April 2005.



POSTGRADUATE EXAMINATION/VIVA UTM PhD Students Assistant Chairman 3. Student: Chew Kew Hong

Title: Total Site Heat Integration Considering Pressure Drops Year: 2015

2. Student: Liew Peng Yen Title: Total Site Heat Integration Tools for Continuous Variable and Demands System Year: 2015

1. Student: Aqeel Ahmed Bazmi

Title: Optimization and Projection of Decentralized Energy Generation Based on Palm Oil Biomass Year: 2012

UTM PhD Students Proposal Examiner 16. Student: Haslenda Abdul Sahak

Title: Systematic Method for Inherent Safety Health Design Consideration throughout Process Design Life Cycle. Year: 2015

15. Student: Mismisuraya Meor Ahmad

Title: Development of an Integrated Antioxidant Activity Prediction Model for Herbs Year: 2015

14. Student: Siti Nuurul Huda Mohd Azmin Title: Computer aided solvent design for optimal extraction of high-value active ingredients in Malaysian herbs Year: 2014

13. Student: Siti Sulaiha Sulaiman Title: Optimization of palm oils refining processes using hybrids of neural network-genetic algorithms and particle swarm-firefly algorithms Year: 2014

12. Student: Muhammad Saufi Tarmizi Title: Modelling Centralized Sewage Treatment Plant for Electricity Generation in Iskandar Malaysia Year: 2014

11. Student: Siti Akhtar Ishak Title: An Optimal Cement Plant Under Carbon Constraints Year: 2013

10. Student: Mohamad Asri Mahmood Title: Application Fault Detection and Diagnosis in Multiple Unit Operations using Multivariate Statistical Process Control Year: 2013

9. Student: Syazwani Ab Aziz Title: Modelling and Optimization of Electricity Generation from Biogas Production of Palm Oil Mill Effluent Year: 2013

8. Student: Saifaralina A. Jalil Title: Systematic Technique of Fugitive Emission Reduction in Chemical Process Industry Year: 2013



7. Student: Amir Tabari Title: Optimal Design and Operation of Semicontinuous Azeotropic Distillation Process Year: 2012

6. Student: Abbas Azarpour Hassankiadeh

Title: Heterogeneous dynamic modelling, simulation and optimization of PTA plant industrial hydropurification reactor Year: 2012

5. Student: Nor Erniza Mohammad Rozali

Title: Power Pinch Analysis for Optimal Design of Hybrid Power Systems Year: 2012

4. Student: Saifaralina A. Jalil

Title: Systematic Technique of Fugitive Emission Reduction in Chemical Process Industry Year: 2012

3. Student: Siti Akhtar Ishak

Title: Mathematical Optimization using GAMS to Reduce CO2 Emissions from Cement Plant Year: 2012

2. Student: Phoon Li Yee

Title: Establishment of Physiochemical Properties of Tailor-Made Green Diesel from Biomass Year: 2012

1. Student: Mohamad Asrul Mustapha

Title: Sustainable Green Management Systems Year: 2012

UTM PhD Students Proposal Chairman 4. Student: Chuo Sing Chuong

Title: Extraction of Erytromycin Utilizing Sophorolipids Reverse Micellar System Year: 2013

3. Student: Wan Nurul Izyani Wam Mohd Zawawi Title: Synthesis and Characterization of Biocer as High Performance Nanocomposite Biocatalysts Year: 2013

2. Student: Mutahharah Mohd Mokhtar Title: Emissions from Coal-Fired Power Plant in Malaysia Year: 2012

1. Student: Abdullahi Mohammed Evuti

Title: Treatment of Volatile Organic Compounds from Pharmaceutical Waste Water using Integrated Air Stripping and Non Thermal Plasma System Year: 2012

Conversion to PhD Proposal Examiner 4. Student: Muhammad Saufi Tarmizi

Title: Decentralized Sewage Treatment Plant for Enhancement of Green Technology in Iskandar Malaysia Year: 2013

3. Student: Nurul Sulaiha Sulaiman Title: Optimization of Palm Oil Refining Processes Year: 2013

2. Student: Nik Norashikin Nik Abd. Aziz



Title: Inherent Occupational Health Assesment for Chemical Batch Processes Year: 2012

1. Student: Syaza Izyani Ahmad

Title: Designing Sustainability Index for Process Design State Year: 2012

M.Eng. (Chemical) Viva Examiner 1. Student: Nik Norashikin Nik Abd Aziz

Title: Inherent Occupational Health Assessment for Chemical Batch Processes. Year: 2014

M.Eng. (Chemical) Proposal Examiner 6. Student: Muhamad Nazrin Othman

Title: Design Biogas Distributed Energy System Through Gas Cascade System Analysis (GASCA). Year: 2015

5. Student: Muhamad Reza Abbasi

Title: Mathematical Model for Cost Effective Minimum Water and Energy Networks. Year: 2013

4. Student: Johnathan Har Sean Hou Title: Fugitive Emission Estimation from Storage Tank and Wastewater Treatment Units. Year: 2013

3. Student: Santha a/p Pandian Title: Computer Aided Design of Occupationally Healthier Chemical Processes. Year: 2012

2. Student: Nik Norashikin Nik Abd. Aziz Title: Inherent Occupational Health Assessment for Chemical Batch Processes. Year: 2012

1. Student: Menaka a/p Narayanasamy Title: Modelling of Diesel Engine and Performance Testing of Tailor-Made Green Diesel using Computational Fluid Dynamics. Year: 2012

M.Eng. (Chemical) Proposal Chairman 1. Student: Hanna Ilyani Zulhaimi

Title: Performance of Integrated System Combining Photo-Fenton and Membrane Bioreactor for Spent Caustic Wastewater. Year: 2012

M.Eng. (Chemical) Mixed-Mode Dissertation 2 Examiner 12. Student: Ainur Munirah Hafizan

Title: Heat integration with operability and safety consideration. Year: 2015

11. Student: Kee Mohd Rafique Kee Zainal Abidin Title: Two mathematical models of natural matter extraction by supercritical CO2. Year: 2015

10. Student: Khairunnisa Mohidin Title: Engine performance tests of tailor made green diesel blends. Year: 2014



9. Student: Amin Rahmanian

Title: Carbon Dioxide Capture from Reforming Gases using Modified Amine Solution with Acetic Acid. Year: 2013

8. Student: Busari Bolaji Ibrahim Title: A Graphical Cost-Screen Technique for Carbon Management. Year: 2013

7. Student: Isah Umar Abdullahi Title: A Numerical Method for Determining the Optimal Minimum Temperature Difference of Heat Exchanger Network. Year: 2012

6. Student: Meysam Davoody Title: Fuzzy and Hybrid Modeling of Supercritical Fluid Extraction of Pimpinella Anisum L. Seed. Year: 2012

5. Student: Azduwin Khasri Title: Slow Pyrolysis of Imperata Cylindrica in a Fixed Bed Reactor. Year: 2012

4. Student: Cici Maarasyid Title: A Graphical Approach for Cost Targeting of Heat Recovery Networks with Mixed Heat Exchanger Types. Year: 2012

3. Student: Mohsen Chezghani Title: A Graphical Method for Simultaneous Targeting and Design of Multiple Utility Systems. Year: 2012

2. Student: Yanwarizal Title: Continuous Individual Plot Curves Technique for Simultaneous Targeting and Design of a Mass Exchange Network. Year: 2012

1. Student: Chuah Wei Sze Title: Integration of Trigeneration System with Process using Segregated Problem Table Algorithm. Year: 2012

M.Eng. (Chemical) Mixed-Mode Dissertation 2 Chairman 1. Student: Ali Moslehyani

Title: Silver Ion Exchange Fillers Incorporated with Mixed Matrix Membrane for Antibacterial Application. Year: 2012

M.Eng. (Chemical) Mixed-Mode Dissertation 1 Examiner 7. Student: Mehdi Rahmanian

Title: Hydrogen Recovery Using Comercialized Activated Carbon Year: 2013

6. Student: Mohammadreza Dehghani Title: Integrated Maximum Water Recovery Design and Controller Year: 2013

5. Student: Mohammad Reza Abbasi Title: Cost effective minimum water and energy networks.



Year: 2012

4. Student: Cici Maarasyid Title: STEP method application in total site of industry. Year: 2012

3. Student: Pouye Panahi Title: Biodiesel Production from Algae Oil in Continuous Reactive Distillation Column by Ionic Solid. Year: 2012

2. Student: Jonathan Har Sean Hou Title: Fugitive Emission Estimation from Storage Tank and Wastewater Treatment Unit. Year: 2012

1. Student: Augustine Agha Oko Title: Sustainable Green Management System (SGMS) Focusing on the Creation of Green Footprint. Year: 2012

M.Eng. (Chemical) Mixed-Mode Dissertation 1 Chairman 2. Student: Ali Bagheri

Title: Formulation and Optimization of Ginger Niosome for Obesity Treatment. Year: 2013

1. Student: Amin Rahmanian Title: Investigating the effect of Polyethersulfone Halloysite Nanotubes Clay for Mercury Removal from Treated Water. Year: 2012



PUBLICATIONS Total Publications: 169: ISI/WOS Journals (12), SCOPUS-indexed Journals (41), Non-indexed Journals (4), Books (2), Book Chapters (7), Proceedings (102), Others (1) Citations: 156 (Scopus), 323 (Google scholar); h-index: 7 (Scopus), 8 (Google scholar) ISI/WOS Journals 12. Balasundram, V., Ibrahim, N. Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., and Ali, R. r.

(2018). Thermogravimetric Catalytic Pyrolysis and Kinetic Studies of Coconut Copra and Rice Husk for Possible Maximum Production of Pyrolysis Oil, Journal of Cleaner Production, 167, 218 – 228. (IF: 5.715)

11. Esfeh, H. K., Azarafza, A., and Hamid, M. K. A. (2017). On the Computational Fluid Dynamics of PEM Fuel Cell (PEMFCs): An Investigation on Mesh Independence Analysis. RSC Advances, 7(52), 32893-32902. (IF: 3.108)

10. Esfeh, H. K., and Hamid, M. K. A. (2016). Algebraic Form and New Approximation of Butler-Volmer Equation to Calculate the Activation Overpotential. Journal of Electrochemical Energy Conversion and Storage, 13(2), 021003.

9. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). Selection of Minimum

Temperature Difference (∆Tmin) for Heat Exchanger Network Synthesis Based on Trade-off Plot. Applied Energy, 162, 1259-1271.(IF: 7.182)

8. Akbari, V., Borhani, T. N. G., Aramesh, R., Hamid, M. K. A., Shamiri, A., and Hussain, M. A. (2015). Evaluation of hydrodynamic behaviour of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model. Computers & Chemical Engineering, 82, 344-361. (IF: 3.024)

7. Akbari, V., Borhani, T. N. G., Shamiri, A., Aramesh, R., Hussain, M. A., and Hamid, M. K. A. (2015). 2D CFD-PBM simulation of hydrodynamic and particle growth in an industrial gas phase fluidized bed polymerization reactor. Chemical Engineering Research and Design, 104, 53-67. (IF: 2.538)

6. Akbari, V., Borhani, T. N. G., Shamiri, A., and Hamid, M. K. A. (2015). A CFD-PBM coupled model of hydrodynamics and mixing/segregation in an industrial gas-phase polymerization reactor. Chemical Engineering Research and Design, 96, 103-120. (IF: 2.538)

5. Borhani, T. N. G., Akbari, V., Afkhamipour, M., Hamid, M. K. A., and Manan, Z. A. (2015). Comparison of Equilibrium and Non-Equilibrium Models of a Trayed Column for Post-Combustion CO2 Capture Using DEA-Promoted Potassium Carbonate Solution. Chemical Engineering Science, 122, 291-298. (IF: 2.895)

4. Borhani, T. N. G., Hamid, M. K. A., and Manan, Z. A. (2015). Rate-Based Simulation and Comparison of Various Promoters for CO2 Capture in Industrial DEA-Promoted Potassium Carbonate Absorption Unit. Journal of Industrial and Engineering Chemistry, 22, 306-316. (IF: 4.421)

3. Akbari, V., Borhani, T. N. G., Godini, H. R., and Hamid, M. K. A. (2014). Model-based analysis of impact of distributor on the performance of industrial polydisperse gas phase fluidized bed polymerization reactor. Powder Technology, 267, 398-411. (IF: 2.942)

2. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2010). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. Computers & Chemical Engineering, 34 (12), 2043 – 2061. (IF: 3.024)

1. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Integration of Process Design and Controller Design for Chemical Processes using Model-Based Methodology. Computers & Chemical Engineering, 34 (5), 683 – 699. (IF: 3.024)

SCOPUS-indexed Journals 41. Balasundram, V., Ibrahim, N., Samsudin, M. D. H., Kasmani, R. M., Hamid, M. K. A., Isha, R., and

Hasbullah, H. (2017). Thermogravimetric Studies on the Catalytic Pyrolysis of Rice Husk. Chemical Engineering Transactions, 56,427-432.



40. Rosely, N. A. M., Rashid, N. A., Mohd Noor, M. A., Hawi, N. D. A., Sepuan, S. Q., Shamsuddin, A., Ibrahim, K. A., and Hamid, M. K. A. (2017). Product Sampling Time and Process Residence Time Prediction of Palm Oil Refining Process. Chemical Engineering Transactions, 56, 1411-1416.

39. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Optimal Retrofit of Natural Gas Liquid Separation Direct Sequence and Feed Condition Sensitivity Analysis. Chemical Engineering Transactions, 56, 1309-1314.

38. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2017). Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio-Oil. Chemical Engineering Transactions, 56, 1177-1182.

37. Sadikin, A. N., Yusof, K. M., Aziz, A. A., Hassim, M. H., Zakaria, Z. Y., Mustaffa, A. A., and Hamid, M. K. A. (2017). A Multi-Year Study of Professional Skills Development Among First Year Chemical Engineering Students. Chemical Engineering Transactions, 56, 1453-1458.

36. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2017). The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. Chemical Engineering Transactions, 56, 901-906.

35. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Hydrocarbon Mixture Fractionation Direct Sequence Retrofiitting and Feed Condition Sensitivity Analysis. Chemical Engineering Transactions, 56, 787-792.

34. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). A Simple Case Study on Application in Synthesising a Feasible Heat Exchanger Network. Chemical Engineering Transactions, 56, 157-162.

33. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). Sensitivity Analysis of Industrial Heat Exchanger Network Design. Chemical Engineering Transactions, 56, 1489-1494.

32. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). An Industrial Case Study Application in Synthesising a Feasible Heat Exchanger Network. Chemical Engineering Transactions, 56, 775-780.

31. Zaine, M. Z., Mustafa, M. F., O., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2016). Sustainable Energy Efficient Distillation Columns Sequence Design of Aromatic Separation Unit. Jurnal Teknologi (Sciences & Engineering), 78(6-12), 101-105.

30. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2016). Energy Efficiency Improvement for Natural Gas Liquds Direct-Splitter-Direct Sequence Fractionation Unit. Jurnal Teknologi (Sciences & Engineering), 78(6-12), 77-83.

29. Zaine, M. Z., Mustafa, M. F., Hassan, O., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2016). Energy Efficient Distillation Columns Analysis for an Aromatic Separation Process. Jurnal Teknologi (Sciences & Engineering), 78(3-2), 121-125.

28. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement in the Natural Gas Liquids Fractionation Unit. Chemical Engineering Transactions, 45, 1873-1878.

27. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability. Chemical Engineering Transactions, 45, 97-102.

26. Nordin, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems. Chemical Engineering Transactions, 45, 211-216.

25. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit. Chemical Engineering Transactions, 45, 1207-1212.

24. Alias, N., Ibrahim, N., and Hamid, M. K. A., Hasbullah, H., Ali, R. R., and Kasmani, R. M. (2015). Investigation of Oil Palm Wastes’ Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. Energy Procedia, 75, 78-83.



23. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Effect of Delta Temperature Minimum Contribution in Obtaining an Operable and Flexible Heat Exchanger Network. Energy Procedia, 75, 3142-3147.

22. Zaine, M. Z., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Minimum Energy Distillation Columns Sequence for Aromatics Separation Process. Energy Procedia, 75, 1797-1802.

21. Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Energy Procedia, 75, 1569-1574.

20. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Integrated Tool for Assessing Sustainability Index of Distillation Column Systems. Journal of Engineering Science & Technology, SI (3), 90-99.

19. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. Modern Applied Science, 9 (7), 154-160.

18. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Controllability Analysis on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. Applied Mechanics and Materials, 735, 299-303.

17. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design target selection for heat exchanger network synthesis based on trade-off plot. Energy Procedia, 61, 2621-2624.

16. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part II: parametric study. Energy Procedia, 61, 2617-2620.

15. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance Part I: modelling and validation. Energy Procedia, 61, 2613-2616.

14. Mustafa, M. F., Abdul Samad, N. A., Ibrahim, K. A., and Hamid, M. K. A. (2014). Methodology development for designing energy efficient distillation column systems. Energy Procedia, 61, 2550-2553.

13. Alias, N., Ibrahim, N., and Hamid, M. K. A. (2014). Pyrolysis of empty fruit bunch by thermogravimetric analysis. Energy Procedia, 61, 2532-2536.

12. Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Rasit Ali, R., Sadikin, A. N., and Asli, U. A. (2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The Malaysian Journal of Analytical Sciences, 18(3), 705-710.

11. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Flexible and Operable Energy Integrated Distillation Column Systems. Applied Mechanics and Materials, 625, 490-493.

10. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System. Applied Mechanics and Materials, 625, 466-469.

9. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Distillation Column System. Applied Mechanics and Materials, 625, 470-473.

8. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2014). Design and Fabrication of Bench-Scale Flash Pyrolysis Reactor for Bio-Fuel Production. Chemical Engineering Transactions, 39, 943-948.

7. Hasbullah, H., Mohamed, F., Ali, R. R., Ibrahim, N., Hamid, M. K. A., Salleh, W. N. W, and Yusof, N. (2014). Morphological Investigation of Alumina Asymmetric Membrane by Manipulating the Sintering Temperature Profile. Applied Mechanics and Materials, 606, 205-209.

6. Hamid, M. K. A. (2014). Development of a Sustainable Integrated Process Design and Control for Chemical Processes. Journal of Applied Sciences, 14(12), 1277-1282.

5. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable Heat Exchanger Networks, Chemical Engineering Transactions, 32, 1297 - 1303.



4. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. Chemical Engineering Transactions, 32, 667 – 672.

3. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. IFAC Proceedings Volume, 9 (1), 463-468.

2. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. In: R. M. de Brito Alves, C. A., Oller de Nascimento and E. C. Biscia Jr. (Eds.). Computer Aided Chemical Engineering, 27 (Part A), Elsevier B. V., Amsterdam. 237 – 242.

1. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation Systems with Recycle. In: J. Jezowski and J. Thullie (Eds.). Computer Aided Chemical Engineering, 26, Elsevier B. V., Amsterdam. 839 – 845.

Non-indexed Journals 4. Nordin, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for an

Extractive Distillation Column Systems. PERINTIS E-Journal, 4(2), 43-77.

3. Akbari, V., and Hamid, M. K. A. (2014). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model in an Industrial Gas Phase Polymerization Reactor. Journal of Engineering Science, 10, 95-105.

2. Hamid, M. K. A., Sin, G, and Gani, R. (2011). An overview of ICAS-IPDC – A software for integrated process design and controller design of chemical processes. PERINTIS e-Journal, 1, 1 – 9.

1. Abdullah, M. S., Hasbullah, H., Ibrahim, N., and Hamid, M. K. A. (2007). Simulation and Optimization of Butane Autothermal Reformer for Fuel Cell Applications. Journal of Chemical and Natural Resources Engineering, Vol. 2, 1 – 13.

Theses/Books 2. Hamid, M. K. A. (2011). Model-Based Integrated Process Design and Controller Design of Chemical

Processes. PhD. Thesis, Technical University of Denmark (DTU). ISBN: 978-87-92481-39-9.

1. Hamid, M. K. A. (2003). Multiple Faults Detection using Artifical Neural Networks. Master Thesis, Universiti Teknologi Malaysia (UTM).

Book Chapters 7. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Three-Dimensional

Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore. 253-261. ISBN: 978-981-287-505-1.

6. Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2015). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore. 245-252. ISBN: 978-981-287-505-1.

5. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2013). Experimental Investigation of Combustion of Flash Pyrolysis Oil. In: Pogaku, R., Bono, A., Chu, C. (Eds.), Development in Sustainable Chemical and Bioprocess Technology, Springer, 181-188. ISBN: 978-1-4614-6207-1.

4. Hamid, M. K. A. (2012). A Conceptual Example of the Integrated Process-Controller Design. In Hashim, H., Hassim, M. H., Wan Alwi, S. R. A. (Eds.), Efficient Sustainable Process, Penerbit UTM Press. ISBN: 978-983-52-0897-3. 38 – 67.



3. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. In: M. M. El-Halwagi and A. A. Linninger (Eds.). Design for Energy and the Environment. Breckenridge, Colorado: CRC Press. 593 – 602.

2. Hamid, M. K. A., Sin, G., and Gani, R. (2008). Integrated Process Design and Control of a Single Reactor System. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2008, DTU Chemical Engineering, 55 – 58.

1. Hamid, M. K. A., and Gani, R. (2007). Integration of Modelling, Design and Control for Efficient Operation of Chemical Processes. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2007, DTU Chemical Engineering, 3 – 6.

Conference Proceedings 102. Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A.

(2017). Quality Prediction of Refined Bleached Deodorized Palm Oil (RBDPO) using Partial Least Square Regression Technique. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

101. Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Azeotrope Mixture. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

100. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Energy Retrofitting: Feed Compositions Sensitivity Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

99. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Retrofitting and Feed Composition Sensitivity Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

98. Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Column Sequence by Driving Force Method and Pinch Analysis for Five Components Distillation. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

97. Zahran, M. F. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Control Properties of Driving Force Based Distillation Columns Design. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

96. Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Alcohol Mixture. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

95. Zahran, M. f. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Relative Gain Analysis of Energy Efficient Hydrocarbon Separation Sequence. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

94. Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Columns Sequence by Driving Force Method and Pinch Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

93. Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A. (2017). Forecasting of Refined Palm Oil Quality using Principal Component Regression. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

92. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse Over Cerium (rare earth) Loaded HZSM-5 Zeolite. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

91. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse using Molybdenum Modified HZSM-5 Zeolite. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.



90. Balasundram, V., Ibrahim, N., Samsudin, M. D. H., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2016). Thermogravimetric Studies on the Catalytic Pyrolysis of Rice Husk. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

89. Rosely, N. A. M., Rashid, N. A., Mohd Noor, M. A., Hawi, N. D. A., Sepuan, S. Q., Shamsuddin, A., Ibrahim, K. A., and Hamid, M. K. A. (2016). Product Sampling Time and Process Residence Time Prediction of Palm Oil Refining Process. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

88. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Optimal Retrofit of Natural Gas Liquid Separation Direct Sequence and Feed Condition Sensitivity Analysis. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

87. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio-Oil. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

86. Sadikin, A. N., Yusof, K. M., Aziz, A. A., Hassim, M. H., Zakaria, Z. Y., Mustaffa, A. A., and Hamid, M. K. A. (2016). A Multi-Year Study of Professional Skills Development Among First Year Chemical Engineering Students. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

85. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

84. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Hydrocarbon Mixture Fractionation Direct Sequence Retrofiitting and Feed Condition Sensitivity Analysis. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

83. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). A Simple Case Study on Application in Synthesising a Feasible Heat Exchanger Network. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

82. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). Sensitivity Analysis of Industrial Heat Exchanger Network Design. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

81. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). An Industrial Case Study Application in Synthesising a Feasible Heat Exchanger Network. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

80. Balasundram, V., Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Investigation on Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

79. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.



78. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Improvement for NGLs Direct-Indirect Sequence Fractionation Unit. 2015 Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

77. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainability Improvement for Natural Gas Liquids of Direct Sequence Separation Process. 2015 Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

76. Balasundram, V., Ibrahim, N., and Hamid, M. K. A. (2015). Investigation on the Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). 2nd. Workshop on Probiorefine. Johor Bahru, December, 7-8.

75. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. 2nd. Workshop on Probiorefine. Johor Bahru, December, 7-8.

74. Ibrahim, N., Kasmani, R. M., Hasbullah, H., Hamid, M. K. A., Ali, R. R., and Sadikin, A. N. (2015). Production of Biogas via Anaerobic Digestion from Coconut Copra Waste and Cow Manure. Global Engineering & Applied Science Conference. Tokyo, December, 2-4.

73. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Design of Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence. International Conference on Fluids and Chemical Engineering (FluidsChE2015). Langkawi, Malaysia. November 25-27.

72. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Indirect Sequence Fractionation. 28th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October 21-22.

71. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Methodology Development for Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence Design. 28th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October 21-22.

70. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Balasundram, V., Hasbullah, H., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2015). Comparison Study of Combustion Characteristic of Biomass-Derived Pyrolysis Oil and Heavy Fuel Oil. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

69. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficiency Improvement for NGLs Indirect Sequence Fractionation Unit. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

68. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Integrated Process Design and Control Methodology for Heat Exchanger Network. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

67. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

66. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

65. Nordin, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Application of Sustainable Integrated Process Design and Control for Four Columns Systems. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

64. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement in the Natural Gas Liquids Fractionation



Unit. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

63. Mohd. Yusof, K., Abdullah, F. A. P., Sadikin, A. N., Abdul Aziz, A., Mustaffa, A. A., Zakaria, Z. Y., Hamid, M. K. A., and Hassim, M. H. (2015). Integrated Course Design for Supporting Contextual Learning for First Year Engineering Students. Innovative Practices in Higher Education 2015 (I-PHEX 2015), Kuala Lumpur, August, 6.

62. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Direct-Splitter-Direct Sequence Fractionation Unit. The 1st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April 20.

61. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Aromatic Separation Unit. The 1st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April 20.

60. Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Ali, R. R., and Kasmani, R. M. (2015). Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

59. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Effect of Delta Temperature Minimum Contribution in Obtaining an Operable and Flexible Heat Exchanger Network. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

58. Zaine, M. Z., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Minimum Energy Distillation Columns Sequence for Aromatics Separation Process. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

57. Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

56. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Analysis for Aromatic Separation Process. The 3rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February 24-26.

55. Azizan, M. F., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A. I., and Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixtures Fractionation Process. The 3rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February 24-26.

54. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence of Natural Gas Liquids. The 7th. Regional Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December 2-3.

53. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. The 2nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November 12-13.

52. Mustafa, M. F., Gotowo, A., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Minimum Energy Distillation Column Sequence for NGLs Fractionation Process. The 2nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November 12-13.

51. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns for Separation of Oxygenates Process. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

50. Zakaria, S. A., Zakaria, M. J., M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Reactor Systems. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.



49. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Distillation Column Systems. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

48. Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2014). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

47. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Energy Efficient Distillation Columns Design for Rettrofit NGLs Fractionation Process. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

46. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

45. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Three-Dimensional Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

44. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Controllability Analysis on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.

43. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Separation of Benzene and Toluene Mixture. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.

42. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Production of Cyclohexanone. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.

41. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., Ibrahim, N. and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns Systems. International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, Korea. 24 – 28 June, pp. 66-69.

40. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Flexible and Operable Energy Integrated Distillation Column Systems. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

39. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

38. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Distillation Column System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

37. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Designing Energy Efficient Distillation Column Systems. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

36. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design Target Selection for Heat Exchanger Network Synthesis Based on Trade-Off Plot. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

35. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). An Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.



34. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Pyrolysis of Oil Palm Empty Fruit Bunch by Thermogravimetric Analysis. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

33. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part II: Parametric study. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

32. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part I: Modelling and validation. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

31. Akbari, V., and Hamid, M. K. A. (2013). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model in an Industrial Gas Phase Polymerization Reactor. National Colloquium on Process Control (NCPC 2013), Universiti Sains Malaysia, Pulau Pinang. 1 Oct.

30. Borhani, T. N. G., Akbari, V., Hamid, M. K. A., Manan, Z. A. (2013). Rate-Based Simulation of DEA Promoted Potassium Carbonate Process. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 338 – 343.

29. Akbari, V., Borhani, T. N. G., Esfeh, H. K., and Hamid, M. K. A. (2013). Computational Fluid Dynamic and Population Balance Modeling of Industrial Fluidized Bed Polymerization Reactor. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 745 – 751.

28. Lawal, S., Halimoon, H., Zainal Alam, M. N. H., and Hamid, M. K. A. (2013). Optimization of Microbioreactor Operating Volume by Using Attainable Region Approach. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 720 - 725.

27. Mohd-Yusof, K., Hamid, M. K. A., Hassim, M. H., Harun, S., and Syed Hassan, S. A. H. (2013). Problem Based Learning for Process Control and Dynamics, Part 1: Effective Planning for a Typical Course. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 687 - 694.

26. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Integrated Process Design and Control of Heat Exchanger Networks for Biomethanol Production Plant. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 421 - 426.

25. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable Heat Exchanger Networks, 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5.

24. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5.

23. Hamid, M. K. A. (2012). Development of a Sustainable Integrated Process Design and Control for Chemical Processes. In: Bono, A., and Sipaut, C. S. (Eds.). The 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 629 – 634.

22. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2012). Development of a New Model-Based Integrated Process Design and Control for Heat Exchanger Networks. In: Bono, A., and Sipaut, C. S. (Eds.). The 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 883 – 891.

21. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. 3rd. Dansk KemiingeniorKonference, Kgs. Lyngby, Denmark. 16 – 17 June.

20. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. CAPE Forum 2010, Aachen, Germany. 11 – 12 March.

19. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems.



DYCOPS 2010 (9th. International Symposium on Dynamics and Control of Process Systems), Lueven, Belgium. July 5 -7, 449 – 454.

18. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. 10th. International Symposium on Process Systems Engineering, Salvador de Bahia, Brazil. 18 – 2- August.

17. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation Systems with Recycle. 19th. European Symposium on Computer Aided Process Engineering (ESCAPE19), Krakow, Poland. 14 – 17 June.

16. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. FOCAPD 2009 (7th. International Conference on the Foundations of Computer-Aided Process Design), Breckenridge, CO. 7 – 12 June.

15. Hamid, M. K. A., and Gani, R. (2008). A Model-Based Methodology for Simultaneous Process Design and Control for Chemical Processes. FOCAPO 2008 (Foundations of Computer-Aided Process Operations), Cambridge, Massachusetts. June 29 – July 2. 205 – 208.

14. Ahmad, A., Abdul Samad, N. A. F., and Hamid, M. K. A. (2007). Product Optimization of a Fed-Batch Fermentation Processes. European Congress of Chemical Engineering (ECCE-6), Copenhagen, Denmark. Sept. 2007, 16 – 20.

13. Hamid, M. K. A., Ibrahim, N., Ibrahim, K. A. and Ahmad, A. (2006). Simulation of hydrogen production for mobile fuel cell applications via autothermal reforming of methane. International Conference on Natural Resources Engineering and Technology (INRET 2006), Putrajaya, Malaysia. 24-25 July 2006.

12. Mohd. Yusof, K., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Tasir, Z. (2005). Outcomes of Problem-Based Learning Implementation from Students’ Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

11. Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K. and Syed Hassan, S. A. H. (2005). Crafting Effective Engineering Problems for Problem-Based Learning: Universiti Teknologi Malaysia Experiences. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

10. Mohd. Rohani, J., Abu Hassan, M. A., Syed Hassan, S. A. H., Hamid, M. K. A. and Mohd.Yusof, K. (2005). Assessing the Effectiveness of Problem Based Learning (PBL) using Quality Function Deployment (QFD): Students Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

9. Syed Hassan, S. A. H., Mohd. Yusof, K., Hamid, M. K. A. and Hassim, M. H. (2005). Problem-based Learning in Facilities Planning: A Pilot Implementation, 4th Asia-Pacific Forum on Engineering and Technology Education, Bangkok, Thailand, 26-29 September 2005.

8. Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., and Mohd. Yusof, K. (2004). Implementation of Problem-Based Learning in a Typical Engineering Classroom. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

7. Abu Hassan, M. A., Mohd. Yusof, K., Hamid, M. K. A., Hassim, M. H., Abd. Aziz, A., and Syed Hassan, S. A. H. (2004). A Review and Survey of Problem-Based Learning Application in Engineering Education. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

6. Mohd. Yusof, K., Abd. Aziz, A., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Azila, N. M. A. (2004). Problem-Based Learning in Engineering Education: A Viable Alternative for Shaping Graduates for the 21st Century?. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

5. Hassim, M. H., Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K., Syed Hassan, S. A. H., and Esa, M. (2004). Enhancing Learning Through Cooperative Learning: UTM Experience. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

4. Ahmad, A. and Hamid, M. K. A. (2003). Pipeline Leak Detection System in a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference on Chemical and Bioprocess Engineering (ICCBPE), Sabah, Malaysia. August 2003.



3. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Multiple Sensor Faults in a Palm Oil Fractionation Plant Using Artificial Neural Network. Regional Symposium on Chemical Engineering (RSCE 2002) in conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE 2002), Petaling Jaya, Malaysia.

2. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Sensor Failure In a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference On Artificial Intelligence In Engineering and Technology ICAIET, Sabah, Malaysia.

1. Ahmad, A. and Hamid, M. K. A. (2001). Neural Networks for Process Monitoring and Fault Detection: Application to Tennessee Eastman Plant. Malaysian Science & Technology Congress, Melaka, Malaysia.

Other Publications 1. Hamid, M. K. A. (2013). Aspen HYSYS: An Introduction to Chemical Engineering Simulation. LAP

Lambert Academic Publishing. ISBN: 978-3-659-35879-1.

MEMORANDUM OF UNDERSTANDING (MOU) SIGNED International MOU 1. Title: MOU between Focus Consultancy Services, K.S.C.C. (Kuwait) and Universiti Teknologi

Malaysia Date: 1st July 2013

Level: International Role: Member

National MOU 3. Title: MOU between Lahad Datu Edible Oils Sdn Bhd and Universiti Teknologi Malaysia Date: 10th Dec. 2014 Level: National

Role: Leader

2. Title: MOU between Pasir Gudang Edible Oils Sdn Bhd and Universiti Teknologi Malaysia Date: 27th Aug. 2013

Level: National Role: Member

1. Title: MOU between Malaysian Green Technology Corporation and Universiti Teknologi Malaysia Date: 28th March. 2013 Level: National

: Member

ENDOWMENT/GIFT

Gifts 1. From: Lahad Datu Edible Oils Sdn Bhd Date: 27th Oct. 2016 Amount: RM 102,000

Objective: Samples analysis for Refined Bleached Deodorised Palm Oil (RBDPO) product quality prediction using statistical methods.



PROFESSIONAL SHORT COURSE CONDUCTED 22. Title: Process Operation, Control and Troubleshooting.

Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu

Date: 11, 12, 18 & 19 Mar 2016 Participants: Engineers from Petronas.

21. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Seminar Room, IBD, UTM KL. Date: 21, 22, 28 and 29 Nov 2015. Participants: Engineers from Industry.

20. Title: Distillation Operation, Control and Troubleshooting.

Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 2 – 5 Nov 2015. Participants: Shell Malaysia Technicians.

19. Title: Process Dynamics and Control for Technicians. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Dahlia Seminar Room, IBD, UTM. Date: 25 – 29 Oct 2015. Participants: Shell Malaysia Technicians.

18. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 10 – 13 May 2015. Participants: Shell Malaysia Technicians.

17. Title: Process Dynamics and Control for Technicians. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Dahlia Seminar Room, IBD, UTM. Date: 15 – 19 Mar 2015. Participants: Shell Malaysia Technicians.

16. Title: Distillation Operation, Control and Troubleshooting.

Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 28 – 31 Dec. 2014. Participants: Shell Malaysia Technicians.

15. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu

Date: 31 Oct., 1, 7 & 8 Nov. 2014 Participants: Engineers from Petronas.


Date: 9 – 10 & 16 – 17 Aug. 2014 Participants: Engineers from Petronas.

13. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 11 -14 Aug. 2014.



Participants: Shell Malaysia Technicians.

12. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 5 – 8 May 2014. Participants: Shell Malaysia Technicians.

11. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 17 – 20 Sept. 2013. Participants: Shell Malaysia Technicians and AdeChem Engineers.


Date: 10, 11, 17, 18 May 2013. Participants: Engineers from Petronas.

9. Title: Introduction to Chemical Engineering Process Simulator using Aspen HYSYS. Organizer: Process Systems Engineering Centre (PROSPECT), UTM. Venue: Seminar Room, PROSPECT, UTM. Date: 13 – 14 Apr 2013. Participants: UTM Postgraduate Students.

8. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Seminar Room, IBD, UTM KL. Date: 16, 17, 23, 24 Feb. 2013. Participants: Engineers from Industry.

7. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Kenanga Seminar Room, IBD, UTM. Date: 15 – 18 Oct. 2012. Participants: Shell Malaysia Technicians.

6. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 31 Mar. – 1 Apr. 2007. Participants: UTM students.

5. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 17 – 18 Mar. 2007. Participants: UTM students.

4. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 3 – 4 Feb. 2007. Participants: UTM students.

3. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 11 – 12 Mar. 2006.



Participants: UTM students.

2. Title: A One-Day Course on MATLAB® and SIMULINK®: Basics Programming Techniques. Organizer: Institute of Engineers Malaysia (IEM) UTM Student Chapter. Venue: Process Design Lab, FKKKSA, UTM. Date: 19 Feb. 2005. Participants: UTM students.

1. Title: A Three-Day Course on Advanced Process Control. Organizer: Chemical Engineering Pilot Plant (CEPP), UTM. Venue: Jasmine Seminar Room, CEPP UTM. Date: 27 – 29 May 2003. Participants: Industrial Participants from Malaysia.



PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO RESEARCH AND DEVELOPMENT

44. 2015 Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia.

December 15-16.

43. 2nd. Workshop on Probiorefine. Johor Bahru, December, 7-8.

42. International Conference on Fluids and Chemical Engineering (FluidsChE2015). Langkawi, Malaysia. November 25-27.

41. 28th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October 21-22.

40. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

39. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

38. Innovative Practices in Higher Education 2015 (I-PHEX 2015), Kuala Lumpur, August, 6.

37. The 1st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April 20.

36. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

35. The 7th. Regional Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December 2-3.

34. The 2nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November 12-13.

33. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

32. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 – 22.

31. International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, Korea. 24 – 28 June.

30. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

29. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

28. 6th. International Conference on Process Systems Engineering (PSE Asia 2013). Kuala Lumpur. 25-27 June.

27. 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5, 2013.

26. 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia.

25. DYCOPS 2010 (9th. International Symposium on Dynamics and Control of Process Systems), Lueven, Belgium. July 5 – 7.

24. CAPE Forum 2010, Aachen, Germany. March 11 – 12.

23. PhD Summer 2009 School on Uncertainty and Sensitivity Analysis on Numerical Models (28923). CAPEC, Technical University of Denmark (DTU). 3 – 7 Aug. 2009.

22. PhD Summer 2009 School on Advanced Process Optimization (28905). CAPEC, Technical University of Denmark (DTU). 29 Jun – 3 Jul. 2009.

21. ESCAPE 19 (European Symposium on Computer Aided Process Engineering). Cracow, Poland. 14 – 17 Jun 2009.

20. CAPEC Annual Meeting 2009. Comwell Borupgaard, Helsingor, Denmark. 2 – 4 Jun 2009.

19. PhD Summer 2008 School on Advanced Computer Aided Modelling (28901). CAPEC, Technical University of Denmark (DTU). 21 Jul. – 1 Aug. 2008.



18. FOCAPO 2008 (Foundations of Computer-Aided Process Operations). Cambridge, Massachusetts, USA. 29 Jun – 2 Jul. 2008.

17. CAPEC Annual Meeting 2008. Frederiksdal Hotel, Lyngby, Denmark. 9 – 11 Jun 2008.

16. Europen Congress of Chemical Engineering (ECCE-6), Copenhagen, Denmark. 16 – 20 Sept. 2007.

15. PhD Summer School 2007 on Process and Tools Integration (28902). CAPEC, Technical University of Denmark. 20 Aug. – 14 Sept. 2007.

14. 1st. International Conference on Natural Resources Engineering and Technology 2006. Putrajaya, Malaysia. 24-25 July 2006.

13. HYSYS Dynamic Training. Process Control Lab 2, N29, FKKKSA. 28 Dec 2005.

12. Steady State Simulation Using HYSYS Course. Process Control Lab 2, N29, FKKKSA. 27 Dec 2005.

11. 2 Days “Neural Network Fundamentals and Implementation in MATLAB” Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 1-2 Dec 2005.

10. 1 Day “IMAGE PROCESSING with MATLAB & SIMULINK” Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 30 Nov 2005.

9. 2 Days “MATLAB for Control System Design” Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 28-29 Nov 2005.

8. 2 Days “Exploring Fundamental DSP with MATLAB & SIMULINK” Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 23-24 Nov 2005.

7. 2 Days “MATLAB for Fuzzy Logic” Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 21-22 Nov 2005.

6. 1 Day FEMLAB Training Package Course. Process Control Lab 2, N29, FKKKSA. 18 Nov 2005.

5. 2 Days “MATLAB & SIMULINK Fundamental“ Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 16-17 Nov 2005.

4. International Conference on Chemical and Bioprocess Engineering (ICCBPE). Kota Kinabalu, Sabah. 2003.

3. Regional Symposium on Chemical Engineering (RSCE) in conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE). Petaling Jaya, Selangor. 2002.

2. International Conference on Artificial Intelligence in Engineering & Technology (ICAIET). Kota Kinabalu, Sabah. 2002.

1. Malaysian Science & Technology Congress. Riviera Hotel, Melaka. 2001.



PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO TEACHING AND LEARNING

27. Bengkel Pemantapan Programme Review Report (PRR) dan Course Review Report (CRR) Jabatan

Kejuruteraan Kimia. Mahkota Hotel, Melaka. 28 – 30 Sept. 2012.

26. Workshop on Future Direction in Engineering Education. Puteri Pacific Hotel, Johor Bahru. 17 Dec. 2011.

25. One Day Workshop on Writing Course for Outcome-Based Education (OBE). Smart Class Room, N29 FKKKSA. 24 Apr. 2007.

24. Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module F2: Teaching Portfolio Development. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 21 Dec. 2006.

23. Course on Higher Learning Teaching Certificate (SPPT) Level 2 Module E2: Adult Learning. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 20 Dec. 2006.

22. Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module F1: Teaching & Learning Improvement Through Reflection Practice. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 19 Dec. 2006.

21. E-Learning Forum. CTL Hall, UTM. 30 Nov. 2006.

20. Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module E3: Quality Assurance Practice. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 9 Nov. 2006.

19. Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module E1: Curriculum Design & Development. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 7 – 8 Nov. 2006.

18. One Day Course on Outcome-Based Education (OBE). Pulai Springs Resort. 13-14 June 2006.

17. Problem-Based Learning: Sudents’ Experience Forum. CTL Hall, UTM. 6 Apr. 2006.

16. Teaching Evaluation Workshop for Semester II 2005/2006. Dewan Jamuan UTM. 28 Mar. 2006.

15. Active Learning Colloquium. CTL Hall UTM. 28 Feb. 2006.

14. Regional Conference on Engineering Education (RCEE 2005). Eden Garden Hotel, Johor Bahru. 12-13 Dec 2005.

13. Half-Day Seminar on Designing Courses for Outcome-Based Education (OBE). Dewan Senat UTM. 9 Dec 2005.

12. Bengkel E-Learning untuk Problem Based Learning (PBL). Makmal Komputer 1 & 2, Pusat Pengajaran dan Pembelajaran. 7-8 July 2005.

11. Bengkel “Developing Teaching in English Skill“.Smart Class Room, N29. 11 April 2005.

10. Bengkel Pendedahan dan Latihan Lanjutan Problem-Based Learning (PBL) bagi Staf Sumber PBL dan CL-PBL Support Group Fakulti. Rumah Alumni, UTM. 5-7 April 2005.

9. Basics Counseling Skills Academic Mentors. Bilik Jasmin, CEPP. 22 Feb 2005.

8. Kursus Pembelajaran Berasaskan Teknologi (e-learning). Makmal Komputer 2, Pusat Pengajaran dan Pembelajaran. 18-19 Jan 2005.

7. A One Day Workshop on Active Learning and Cooperative Learning. Smart Class Room, N29, FKKKSA. 10 Jan 2005.

6. Conference on Engineering Education (CEE 2004). Renaissance Hotel, Kuala Lumpur. 14–15 Dec 2004

5. Kursus Kaedah Pengajaran & Pembelajaran: Pembelajaran Dewasa (Adult Learning). Dewan Kuliah 2, Pejabat Pengajaran & Pembelajaran, Bangunan SPS, Blok F54, UTM. 7 Dec 2004.

4. Perbincangan Mengenai Pelaksanaan Pembelajaran Kooperatif dan Pembelajaran Berasaskan Masalah di UTM. Dewan Senat, Aras 3, Bangunan Pentadbiran, UTM. 18 Oct 2004.

3. A One Day Workshop on Learning Outcomes. Bilik Mesyuarat Fakulti, FKKKSA, UTM. 12 Aug 2004.



2. Bengkel Pendedahan dan Latihan Lanjutan Problem Based Learning (PBL) di Kalangan Timbalan Dekan, Ketua Jabatan dan Staf Sumber PBL Fakulti di UTM. Rumah Alumni, UTM. 19–20 July 2004.

1. A One Day Workshop on Learning Outcomes. Bilik Mesyuarat Fakulti, FKKKSA, UTM. 16 June 2004.



PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO SELF DEVELOPMENT

19. Venture Plan Essential Boot Camp. Pangkor Island Beach Resort, Perak. 7 - 11 Oct 2013.

18. 5DOI & Business Terms Workshop. Renaissance Hotel, Johor Bahru. 2 - 4 Oct 2013.

17. Program Pembangunan Kepimpinan Inovatif & Tranformasi Pensyarah Muda – KIT 2012 (Zon Selatan). Cherengin Hills Convention & Spa Resort, Janda Baik, Pahang. 8 – 10 Jun. 2012.

16. PROSPECT Strategic Planning 2012. Grand Lexis, Port Dickson. 25 – 27 May 2012.

15. Taklimat ke Arah Membina Kerjaya Cemerlang sebagai Pensyarah. Institute of Bioproduct Development, UTM. 16 May 2012.

14. Revisit Global Branding Through Creativity and Innovation (GBCI) Workshop. Mahkota Hotel, Melaka. 29 – 31 Dec. 2011.

13. UTM Professional Qualification Development Programme (PQDP). Smart Class Room, N29 UTM. 16 Aug. 2011.

12. Academic Advising Course for Academic Advisor. Le Grandeur Palm Resort, Senai johor. 26 – 27 Jul. 2011.

11. Kursus Bina Negara untuk Ahli Akademik yang Melanjutkan Pelajaran di Luar Negara. Kem Bina Negara, Ulu Sepri, Negeri Sembilan. 27 Apr. – 1 May 2007.

10. Chemical Engineering Department Excellence Workshop. Tiara Beach Resort, Port Dickson. 16 – 18 Jun 2006.

9. Chemical Engineering Department Excellence Workshop. Summerset Resort Rompin. 18 – 20 Nov. 2005.

8. Basic Counselling Skills for Academic Mentors. Jasmine Room, CEPP UTM. 22 Feb. 2005.

7. Motivation and Teamwork Workshop for Chemical Engineering Department. Desaru Golden Beach Resort. 10 – 11 Jul 2004.

6. Kursus Induksi untuk Kumpulan Pengurusan dan Professional. Block P16, FKE UTM. 25 May – 10 Jun 2004.

5. UTM Research Methodology Course 2004. Block P16, FKE UTM. 5 – 14 May 2004.

4. IELTS Preparation Course. Senate Hall, Level 3, Administration Building UTM. 26 – 30 Apr. 2004.

3. Kursus Bina Negara untuk Ahli Akademik yang Melanjutkan Pelajaran di Luar Negara. Kem Bina Negara, Ulu Sepri, Negeri Sembilan. 26 Feb. – 1 Mar. 2004.

2. Kursus Orientasi untuk Staff Baru UTM. Dewan Al-Ghazali UTM. 29 Jan. 2004.

1. Marcomedia Flash MX Course. CICT Hall UTM. 15 – 16 Sept. 2003.



REFEREES: Dato‘ Seri Ir. Dr. Zaini bin Ujang Secretary General Pejabat Ketua Setiausaha Ministry of Energy, Green Technology and Water Blok E4/5, Kompleks Kerajaan Parcel E Pusat Pentadbiran Kerajaan Persekutuan 62668 W. P. Putrajaya, Malaysia. Tel: +6 03 8883 6363 Fax: +6 03 8889 3177 Email: [email protected] Professor Dr. Zainuddin Abd. Manan Deputy Vice-Chancellor (Academic & International) Office of Deputy Vice-Chancellor (Academic & International) Universiti Teknologi Malaysia 81310 UTM Johor Bahru, Johor, Malaysia. Tel: +6 07 553 0365 Fax: +6 07 554 7371 Email: [email protected]

dr. mohd. kamaruddin bin abd. hamid · 2017-12-18 · district liason officer, institut inovasi...

Documents