universiti tun hussein onn malaysia fakulti...
TRANSCRIPT
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
PERANCANGAN KULIAH
LECTURE PLAN
MAKLUMAT MATA PELAJARAN (SUBJECT INFORMATION)
SEMESTER / SESI (SEMESTER / SESSION)
: II / 2015 – 2016
KOD MATA PELAJARAN (COURSE CODE)
: BDA 10803
NAMA MATA PELAJARAN (NAME OF SUBJECT)
: SAINS BAHAN (MATERIALS SCIENCE)
BEBAN AKADEMIK PELAJAR (COURSE ACADEMIC LOAD) :
Matapelajaran Pra-syarat (Pre requisite subjects)
: -
Nama Pensyarah (Lecturer’s name)
: 1. Dr. Zakiah binti Kamdi (C) 2. Prof. Madya Dr. Hamimah binti Abd. Rahman
Kategori Aktiviti
(Category of Activities)
Aktiviti Pembelajaran
(Learning Activities)
Jumlah Jam/ Semester
(Total Hours/ Semester)
Pembelajaran bersemuka
(Face-to-face learning)
Kuliah (Lecture) 28
Tutorial / Amali (Tutorial / Practical) 28
Aktiviti pembelajaran berpusatkan pelajar lain
(Other student centered learning activities)
6
Pembelajaran kendiri
(Independent study)
Penyediaan tugasan, projek dan lain-lain
(Preparing assignment, project and others)
20
Ulangkaji
(Revision)
20
Persediaan bagi pentaksiran
(Preparation for assessment)
10
Pentaksiran rasmi
(Formal assessment)
Pentaksiran berterusan
(Continuous assessment)
5
Peperiksaan akhir
(Final examination)
3
JUMLAH JAM BELAJAR PELAJAR (JBP)
(TOTAL STUDENT LEARNING TIME (SLT))
120
Disediakan oleh (Prepared by): Tandatangan (Signature) : Nama (Name) : Dr. Zakiah binti Kamdi Tarikh (Date) : 15 February 2016
Disahkan oleh (Approved by): Tandatangan (Signature) : Nama (Name) : Prof. Madya Dr. Sufizar binti Ahmad Tarikh (Date) : 15 February 2016
UNIVERSITI TUN HUSSEIN ONN MALAYSIA FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
MATLAMAT (GOALS) : This course is designed to give an exposure to the student about the basic and applied knowledge in the field of materials science and engineering.
SINOPSIS (SYNOPSIS) : Introduction; Materials Structure; Mechanical Behaviours of Metal; Crystal Imperfection and Diffusion; Phase Equilibrium and Transformation; Metals; Ceramic; Polymer; Composite.
HASIL PEMBELAJARAN (LEARNING OUTCOMES) : At the end of the course, students are able to;
(1) Develop understanding in types of engineering materials, their structures, properties and applications. (C3, LO-1)
(2) Explain solution to problems related to materials science and engineering for individual and/or group assignment. (P2, LO5)
(3) Explain project findings in oral and written form. (A3, LO-3) ISI KANDUNGAN (CONTENT) :
MINGGU (WEEK)
KANDUNGAN (CONTENT)
PENTAKSIRAN (ASSESSMENT)
1 (21 – 25 Feb. 2016)
Kuliah (Class) Chapter 1: Introduction (2 hours) 1.1 Introduction to materials science and engineering, 1.2 Materials Classification,
Quiz Test 1
2-3
(28Feb –10 Mac 2016)
Chapter 2: Materials Structure (4 hours) 2.1 Atomic Structure and Atomic Bonding, 2.2 Crystal and Lattice Bravais System, 2.3 Crystal Structure of Metal, 2.4 Crystallographic Plane and Direction, 2.5 Crystal Structure Analysis.
Quiz Test 1 Final Exam
4-5
(13 – 24 Mac 2016)
Chapter 3: Mechanical Behaviour of Metals (4 hours) 3.1 Elastic Deformation 3.2 Plastic Deformation 3.3 Safety Factor
Quiz Test 1 Final Exam
6-7
(27 Mac – 7 Apr 2016)
Chapter 4: Crystal Imperfection and Diffusion (4 hours) 4.1 Defects 4.2 Diffusion Mechanism : Steady-State Diffusion 4.3 Diffusion Mechanism : Non steady-State Diffusion 4.4 Factors That Influence Diffusion TEST 1 (WEEK 6)
Quiz Test 1 Final Exam
Mid Semester Break (10 - 14 Apr 2016)
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
8-9 (17 – 28 Apr 2016)
Chapter 5: Phase Equilibrium and Transformation (4 hours) 5.1 Basic Concept and Definition; Binary Equilibrium Phase
Diagram, 5.2 Fe-C System, 5.3 Phase Transformation, 5.4 Transformation of Behaviour and Microstructure in Fe-C alloy 5.5 Isothermal Transformation Diagram, 5.6 Heat Treatment
Quiz Test 2 Final Exam
10
(1 – 5 May 2016)
Chapter 6: Metal (2 hours) 6.1 Types of metal alloys, 6.2 Ferrous and Non-ferrous alloys, 6.3 Fabrication and Processing of metals.
Quiz Test 2 Group Project Final Exam
11
(8 – 12 May 2016)
Chapter 7: Ceramic (2 hours) 7.1 Ceramic Structure, 7.2 Mechanical Characteristic, 7.3 Types and Applications of ceramic, 7.4 Fabrication and Processing of ceramic.
Quiz Test 2 Group Project Final Exam
12
(15 – 19 May 2016)
Chapter 8: Polymer (2 hours) 8.1 Classification and Structure of Polymer, 8.2 Mechanical Characteristic, 8.3 Deformation and Strengthening Mechanisme of Polymer, 8.4 Crystallization and Glass Transition Phenomena. TEST 2
Group Project Final Exam
13
(22 – 26 May 2016)
Chapter 9: Composite (2 hours) 9.1 Types of composite, 9.2 Particulate Reinforced composite, 9.3 Fiber Reinforced composite, 9.4 Structure of Composite
Group Project Final Exam
14 (29 May – 3 Jun
2016)
Pembentangan Projek (Project Presentation) Laporan Akhir Projek (Final Project Report)
STUDY WEEK
FINAL EXAMINATION
TUGASAN / PROJEK (ASSIGNMENT / PROJECT) :
Student will be given a materials science related project. The project will need the student to discuss, analyse and give their ideas on the evolution or the changes (materials, fabrication process, related factors etc.) of a product in engineering field.
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
PENILAIAN (ASSESSMENT) :
1. Kuiz (Quizzes) : 5 %
2. Projek Kumpulan (Group Project) : 15 %
3. Ujian 1 (Test 1) : 15 %
4. Ujian 2 (Test 2) : 15 %
5. Peperiksaan Akhir (Final Examination): 50 %
Jumlah (Total) : 100 %
RUJUKAN (REFERENCES) : 1. Callister, W.D. Jr, (2010), Materials Science and Engineering: An Introduction, 8th Edition, John Wiley.
(TA403 .C33 2011) 2. Smith, W.F., (2010), Foundations of Materials Science and Engineering, 5th Edition, McGrawHill. (TA403
.S64 2010) 3. Askeland, D.R., (2011), The Science and Engineering of Materials, 6th Edition, Cengage Learning. (TA403
.A844 2011) 4. Hashim, J., (2013), Sains Bahan, Universiti Teknologi Malaysia. (TA404 .J37 2013) 5. Askeland, D.R. (2014), Essential of Materials Science and Engineering, 3rd Edition, Cengage Learning.
(TA403 .A75 2014) 6. Fischer, T., (2009), Materials Science for Engineering Student, Elsevier. (TA403. F57 2009)
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
KEHADIRAN / PERATURAN SEMASA KULIAH (LECTURE ATTENDANCE / REGULATION)
(1) Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu mata pelajaran termasuk mata pelajaran Hadir Wajib (HW) dan mata pelajaran Hadir Sahaja (HS). Students must attend lectures not less than 80% of the contact hours for every subject including Compulsory Attendance Subjects (Hadir Wajib – HW) and Attendance Only Subjects (Hadir Sahaja – HS).
(2) Pelajar yang tidak memenuhi perkara (1) di atas tidak dibenarkan menghadiri kuliah dan menduduki
sebarang bentuk penilaian selanjutnya. Markah sifar (0) akan diberikan kepada pelajar yang gagal memenuhi perkara (1). Manakala untuk mata pelajaran Hadir Wajib (HW), pelajar yang gagal memenuhi perkara (1) akan diberi Hadir Gagal (HG). Students who do not fulfill (1) will not be allowed to attend further lectures and sit for any further examination. Zero mark (0) will be given to students who fail to comply with (1). While for Compulsory Attendance Subjects (Hadir Wajib – HW), those who fail to comply with (1) will be given Failure Attendance (Hadir Gagal – HG).
(3) Pelajar perlu mengikut dan patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar. Students must obey all rules and regulations of the university and must discipline themselves in order to avoid any disciplinary actions against them.
(4) Pelajar perlu mematuhi peraturan keselamatan semasa pengajaran dan pembelajaran.
Student must obey safety regulations during learning and teaching process. MATRIK HASIL PEMBELAJARAN SUBJEK DAN HASIL PEMBELAJARAN PROGRAM (SUBJECT
LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES MATRIX)
Dilampirkan (Attached)
RPP-04 / Prosedur Perlaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
MATRIK HASIL PEMBELAJARAN KURSUS DAN HASIL PEMBELAJARAN PROGRAM MATRIX OF COURSE LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES
Fakulti (Faculty) : Faculty of Mechanical & Manufacturing Engineering Matrik ini perlu digunakan bersama: (This matrix is to be used with) Program (Programme) : Bachelor of Mechanical Engineering with Honours 1. Objektif Pendidikan Program (PEO)
(Programme Educational Objectives (PEO))
Kod Kursus (Course Code) : BDA 10803 2. Hasil Pembelajaran Program (PLO) Nama Kursus (Course Title) : Materials Science (Programme Learning Outcomes
(PLO))
Bil. (No.)
Hasil Pembelajaran Kursus (Course Learning Outcomes)
Pematuhan kepada PLO (Compliance to PLO) Kaedah Penyampaian (Method of Delivery)
Kaedah Pentaksiran (Method of Assessment)
KPI
PL
O1
PL
O2
PL
O3
PL
O4
PL
O5
PL
O6
PL
O7
PL
O8
PL
O9
PL
O1
0
PL
O1
1
PL
O1
2
PL
O1
3
1. Develop understanding in types of engineering materials, their structures, properties and applications. (C3, LO-1)
C3
Lecture, tutorial
Quiz, Test, Final Examination
100% of student must get 40% of marks and above
2. Explain solution to problems related to materials science and engineering for individual and/or group assignment. (P2, LO5)
P2
Lecture, tutorial
Test, Project, Final Examination
100% of student must get 40% of marks and above
3. Explain project findings in oral and written form. (A3, LO-3)
A3
Lecture, tutorial
Assignment, Project
100% of student must get 40% of marks and above
Jumlah (Total) 1 1 1
Taksonomi Pembelajaran (Learning Taxonomy) Kognitif (Cognitive) Psikomotor (Psychomotor) Afektif (Affective) C1 Pengetahuan (Knowledge) P1 Persepsi (Perception) A1 Menerima (Receiving) C2 Pemahaman
(Comprehension) P2 Set (Set) A2 Memberikan Maklum Balas (Responding)
C3 Aplikasi (Application) P3 Respons Berpandu (Guided Response) A3 Menilai (Valuing) C4 Analisis (Analysis) P4 Mekanisme (Mechanism) A4 Mengorganisasi (Organising) C5 Sintesis (Synthesis) P5 Respons Ketara Kompleks (Complex Overt
Response) A5 Menghayati Nilai (Internalising)
C6 Penilaian (Evaluation) P6 Adaptasi (Adaptation) P7 Lakuan Tulen (Origination)