LAMPIRAN 1

Universiti Teknikal Malaysia Melaka

Karung Berkunci 1752

Pejabat Pos Durian Tunggal

76109 Durian Tunggal

MELAKA

Universiti Utara Malaysia

06010 Sintok

Kedah Darul Aman

Universiti Malaysia Perlis

No. 34 & 35 Bersebelahan Hong Leong Bank

Jalan Bukit Lagi,

01000 Kangar, Perlis

Universiti Teknologi MARA

40450 Shah Alam

Selangor Darul Ehsan

Universiti Sains Malaysia

11800 Minden

Pulau Pinang

Universiti Malaya

Jalan Universiti

50603 Kuala Lumpur

Universiti Sains Islam Malaysia

Bandar Baru Nilai

71800 Nilai

Seremban, Negeri Sembilan

Universiti Teknologi Malaysia

81310 Skudai

Johor Darul Takzim

Universiti Islam Antarabangsa Malaysia

P.O. Box 10

50728 Kuala Lumpur

Universiti Kebangsaan Malaysia

43600 Bangi

Selangor

LAMPIRAN 1

Universiti Pendidikan Sultan Idris (UPSI)

35900 Tanjong Malim

Perak

Universiti Tun Hussein Onn Malaysia

86400 Parit Raja

Batu Pahat, Johor

Universiti Sultan Zainal Abidin

Kampus Gong Badak

21300 Kuala Terengganu

Terengganu Darul Iman

Universiti Malaysia Sabah

Beg Berkunci 2073

88999 Kota Kinabalu, Sabah

Universiti Malaysia Kelantan

Karung Berkunci 36

16100 Kota Bharu

Kelantan

Universiti Malaysia Pahang

Lebuhraya Tun Razak

26300 Kuantan, Pahang

Universiti Malaysia Sarawak

94300 Kota Samarahan

Sarawak

Universiti Pertahanan Nasional Malaysia

Kem Sungai Besi

57000 Kuala Lumpur

Universiti Malaysia Terengganu

21030 Kuala Terengganu

Terengganu

Universiti Putra Malaysia

43400 Serdang

Selangor Darul Ehsan

TARIKH / HARI MASA AKTIVITI TEMPAT

24 September 2018

(Isnin)

9.00 pg – 10.00 pg Pendaftaran Peserta

Dewan WarisanPUO

10.00 pg – 10.30 tgh Taklimat Pertandingan

10.30 pg – 12.00 tgh Agihan Bahan untuk Pembinaan Model

12.00 tgh – 12.30 tgh Rehat

12.30 tgh – 5.00 ptg Pembinaan Model Berstruktur

25 September 2018

(Selasa)

8.30 pg – 1.00 ptg Pengujian Model Berstruktur

1.00 ptg – 2.00 ptg Rehat

2.00 ptg – 4.30 ptg Ucaptama dan Majlis Perasmian Penutup dan Penyampaian Hadiah

TENTATIF PROGRAM

LATAR BELAKANG PROGRAM

IMPAK

Jabatan Kejuruteraan Awam (JKA), PUO akan mengadakan program Build & Break Competition 2018 (BBC 2018) pada 24 dan 25 September 2018 dan terbuka kepada semua pelajar sekolah menengah dan Kolej Vokasional di Negeri Perak dan Institusi Pengajian Tinggi dalam dan luar negara.

Pertandingan ini memerlukan peserta untuk membina model berstruktur yang mempunyai kriteria tertentu seperti yang telah ditetapkan dalam syarat pertandingan. Setiap kumpulan perlu menggunakan daya kreativiti mereka untuk membina model dengan bahan-bahan yang dibekalkan.

Program ini diadakan bertepatan dengan hasrat kerajaan dalam Pelan Pembangunan Pendidikan Malaysia 2015-2025 (Pendidikan Tinggi) yang berlandaskan lima aspirasi sistem iaitu akses, kualiti, ekuiti, perpaduan dan kecekapan dan enam atribut aspirasi pelajar iaitu etika dan kerohanian, kemahiran memimpin, identiti nasional, kemahiran bahasa, kemahiran berfikir, dan pengetahuan yang dirangka melalui 10 anjakan yang digariskan dalam PPPM (PT) ini.

Penganjuran program ini juga sebagai satu medium untuk peserta mengaplikasi pengetahuan teori dan amali bagi ilmu fizik serta asas struktur dan pembinaan model berstruktur ini juga akan menggalakkan peserta untuk berfikir secara kreatif dan inovatif.

Dr. Seri Bunian bt. Mokhtar (overseas) 019 - 559 7174Muhammad Zahoreen Abdullah 011 -1871 1202Zulhasdee bin Zulkifli 019 - 504 6215

Organized by :

www.buildandbreak.net

For any enquiries :

RULES AND REGULATION.

EVALUATION CRITERIA

a) Structural Efficiency – 50% b) Creativity and Engineering Design – 30% c) Poster – 20%

POSTER

Each group is required to submit an A3 sized poster during registration. The poster must include the following items:

a) Name of institution b) Group name c) Group members d) Advisor e) Model description

CONTEST RULE

1. A maximum of 4 members and 1 advisor are allowed per group. 2. A model bridge structure must be constructed within 4 hours at the place provided by the organiser. 3. The model bridge structure must meet all specifications of the Build and Break Competition 2018. 4. The model bridge structure must be constructed only from official wood, adhesive and thread provided to the contestants. No other materials may be applied to the model.

MODEL SPESIFICATIONS

1. The model bridge structure must be of the following dimension:

a. Length(L) – 1000mm b. Maximum width(W) – 100mm c. Maximum height(H) – 300mm d. Maximum beam thickness(T) – 20mm e. Span(S) – 900mm

The base must be flat! Refer Figure 1 below

Figure 1

2. The model bridge structure must be constructed to provide for the placement of the loading plate (see Figure 2) at each of the two loading points.

Figure 2

3. Any portion of structure above or below the loading plane must provide clearance for the loading rod at the two loading point locations.

LOADING

1. The load will be applied downwards from below and will be place at the loading points. 2. Model bridge structure failure is defined as the inability of the model to carry additional load, including joint failure, and will be decided by the judges.

QUALIFICATION

1. The model bridge structure will be checked for confirmity to design, dimension and construction rules. 2. Disqualified model may be tested if time permits but not eligible for awards. 3. All decisions by the judges are final.

FEES & PAYMENT

Politeknik / IPT / Kolej Vokasional RM150.00/Group

School RM150.00/Group

International Institution USD250.00/Group