tunas saintis 2013

7/28/2019 Tunas Saintis 2013

http://slidepdf.com/reader/full/tunas-saintis-2013 1/7

MARA JUNIOR SCIENCE COLLEGE

PARIT,PERAK

AUTOMATIC SHOE POLISH

CATEGORY:innovation

TEACHER ADVISOR:

Mr. Zul Hakim Bin Sharkawi

PREPARED BY:

• Nabeel Shahrol Azmi



• Muhammad Siraj Munir Bin Shamsurizal

• Muhammad Khairul Ilmi Bin Othman

• Muhammad Aizuddin Bin Azmin

• Nurin Nazwa Binti Elias Jemadi

• Qamarina Safura Binti Mohd Amin

TABLE CONTENT

CONTENT PAGE

ABSTRACT 3-4

ACKNOWLEDGEMENT 5

INTRODUCTION 6-9

LITERATURE REVIEW 10-27

METHODOLOGY 28-32

DISCUSSION&CONCLUSION 33-37

BIBLIOGRAPHY 38-40



ABSTRACT

Development of Automatic Shoe Polisher

The aim of this project is to create an instant and spit shine shoe polishing

machine for MJSC Parit’s community as our college have problem with punctuality

especially the student. In this project, the automatic shoe polisher was built using a

motor,buffing kit,gears,belting kit and a rheostat. The result that we obtain after a few

times testing using the developed shoe polish it has an RPM(Rotation per minute) of

about 6000rpm.The shoe polish can polish a shoe of about 2 minute without any black

dust sticking on your finger and without the chemical damaging the human body.



AKNOWLEDGEMENT

Alhamdulillah and thanks to the Almighty Allah, The Most Glorious and The Most

Merciful, for giving us strength and bless therefore we are able to accomplish and complete our

MRSM Young Scientist Programmed project and also be able to complete our thesis.

Firstly, we would like to express a thousand of appreciations to our

supervisor.Mr.Zulhakim for the assistances, admonitions, patients and guidance towards the

progress of this project.

This acknowledgement also goes to all our friends for the supports, assistance and

opinions during the development of this project.

Finally we would like to give millions of thanks to any party or individual which

are directly or indirectly involve in order accomplishing this project, our parent, family and



friends, especially Nabeel bin Shahrol Azmi,Muhammad Siraj Munir Bin

Shamsurizal,Muhammad Aizuddin Bin Azmin,Muhd Khairul Ilmi Bin Othman,Nurin

Nazwa,Qamarina Safura for all their supports and motivation for us . We would also like to ask

for forgiveness if there is any mistake and difficulties occurred during the process of this

project. Thank you for all that had lean a helping hand for us.

CHAPTER 1

OBJECTIVE

To help people to polish their shoes without compromising its neatness

AUTOMATIC SHOE POLISHER



The two basic types of shoe polish -- sole cleaner and overall buff -- each use a rapidly turning

motor controlled by a rheostat that spins about 6000rpm in full throttle with a buff connected

with a connecting belt to a gear,the gear is fixed to a buffer that run by the motor.

The basic components:

•A buffer

•A motor that can run at a high speed

•Belt

•Gear

•Storage box

•Rheostat

The method for creating a good buff is by manipulating the buffer,the motor speed, and

the wax used is what differentiates the shoes shinness. When the motor is connected to

the power supply,then the current flow is controlled by a rheostat,When the motor

turns,the belt turn the gear that spin the buffer.When the buffer turns, the shoe is

manipulated around the buffer and is pressed a little bit.



•

tunas saintis 2013

Documents