universiti teknikal malaysia melaka · 2020. 2. 15. · c. career history/working experiences 1....
TRANSCRIPT
-
1
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
Curriculum Vitae .
I. Personal Particulars
Name: Associate Professor Ts. Dr. Effendi Bin Mohamad
Faculty/Centre: Faculty of Manufacturing Engineering Current Position: Associate Professor Position’s Grade: DS 54 Tel.no. : +60123745208 E-mail : [email protected]
Date of CV updated: Jan 2020
II. A. Academic and Professional Qualifications
Year Degree Discipline University
2002
2007
2013
Bachelor of Engineering with
Honors (B. Eng.Hons)
Master of Science
(Distinction)
Doctor of Engineering
(Dr.Eng)
Manufacturing Engineering
Engineering Business Management
Intelligent Structures and Mechanics Systems Engineering
Universiti Malaya , Malaysia
Coventry University, United Kingdom
Tokushima University, Japan
B. Titles of postgraduate thesis written
i. Lean Manufacturing Implementation: A study on The Development of Key Performance Indicators (KPIs)
At Aerospace Manufacturing Company – Master of Science, 2007
ii. A Simulation and Modeling Approach To Lean Manufacturing – Doctor of Engineering, 2013
C. Career History/Working Experiences
1. 2002-2003: Process Engineer
(NEC Semiconductors (M) Sdn. Bhd Selangor, Malaysia)
2. 2003-2004: Executive
(Perodua Sales Sdn Bhd, Malaysia)
3. 2004-2005: Industrial Engineer
(ST Microelectronics Sdn Bhd Johor,Malaysia )
4. 2005-2006: Tutor
Department of Manufacturing Management, Faculty of Manufacturing Engineering, UTeM.
5. 2006-2007: Study Leave for MSc at Coventry University, UK
6. 2007-2010: Lecturer
Department of Manufacturing Management, Faculty of Manufacturing Engineering, UTeM.
7. 2010-2013: Study Leave for Doctor of Engineering at Tokushima University, Japan.
8. 2013 - 2016: Senior Lecturer
Department of Manufacturing Management, Faculty of Manufacturing Engineering, UTeM.
9. 24 Nov 2017 to 24 Dec 2017 - Visiting Scholar for foreign Researcher, Tokushima University, Japan.
10. 2 September 2018 to 8 September 2018 - Visiting Professor, University of Brawijaya, Indonesia.
-
2
11. Mei 2016 – November 2018: Head of Department
Department of Manufacturing Management, Faculty of Manufacturing Engineering, UTeM.
12. March 2019: Visiting Scholar for foreign Researcher, Tokushima University, Japan.
1. Teaching Responsibilities
NO SEMESTER/SESI SUBJECT LEVEL
1 Semester I / 2004/2005 Engineering Metrology (DMFD 2542) Diploma
2 Semester I / 2005/2006 Engineering Metrology BMFP 3543 Undergraduate
3 Semester I / 2005/2006 Manufacturing Process (BMFS 2513) Undergraduate
4 Semester I / 2005/2006 Engineering Metrology (DMFD 2542) Diploma
5 Semester I / 2007/2008 Manufacturing Process (DMFD 2323) Diploma
6 Semester II / 2007/2008 Industrial Laws and O.S.H.A(BMFP 4573) Undergraduate
7 Semester II / 2007/2008 Industrial Engineering (BMFP 3513) Undergraduate
8 Semester I / 2008/2009 Industrial Engineering (BMFP 3513) Undergraduate
9 Semester I / 2008/2009 Human Resource Management (BMFP 4553) Undergraduate
10 Semester II / 2008/2009 Industrial Laws and O.S.H.A(BMFP 4573) Undergraduate
11 Semester I / 2009/2010 Industrial Laws and O.S.H.A(BMFP 4573) Undergraduate
12 Semester I / 2009/2010 Lean Manufacturing (BMFP 4523) Undergraduate
13 Semester II / 2009/2010 Lean Manufacturing (BMFP 4523) Undergraduate
14 Semester I /2013/2014 Quality Control (DMFD 3582) Diploma
15 Semester II /2013/2014 Industrial Engineering (BMFP3513) Undergraduate
16 Semester II /2013/2014 Manufacturing Practice (BMFS 1312) Undergraduate
17 Semester II /2013/2014 Facilities Planning (UTeM: MMFD 5053) Post Graduate (UTeM)
18 Semester II /2013/2014 Facilities Planning (CTRM: MMFD 5053) Post Graduate (Offshore)
19 Tri-Semester / 2013/2014 Advanced Manufacturing Service Management (MTKA 5213)
Post Graduate (MBA)
20 Semester I / 2014/2015 Manufacturing System (BMFG 2113) Undergraduate
21 Semester I / 2014/2015 Occupational Safety and Health (BMFG 4662) Undergraduate
22 Semester I / 2014/2015 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
23 Semester I / 2014/2015 Engineering and Technology Management (CTRM: MPSW 5053)
Post Graduate (Offshore)
24 Semester I / 2014/2015 Engineering and Technology Management (PKB:
MPSW 5053) Post Graduate
(Offshore)
25 Semester II / 2014/2015 Industrial Engineering (BMFP 3513) Undergraduate
26 Semester II / 2014/2015 Manufacturing Strategy (BMFP 4563) Undergraduate
27 Semester II / 2014/2015 Advanced Manufacturing Service Management
(MTKA 5213) Post Graduate
(MBA)
28 Semester II / 2014/2015 Facilities Planning (UTeM: MMFD 5053) Post Graduate
(UTeM)
29 Semester II / 2014/2015 Engineering and Technology Management (PUO
MPSW 5053) Post Graduate
(Offshore)
30 Semester II / 2014/2015 Engineering and Technology Management
(Infoera MPSW 5053) Post Graduate
(Offshore)
31 Semester I /2015/2016 Occupational Safety and Health (BMFG 4662) Undergraduate
32 Semester I/ 2015/2016 Manufacturing System (BMFG 2113) Undergraduate
33 Semester I / 2015/2016 Engineering and Technology Management (UTeM MPSW 5053)
Post Graduate (UTeM)
34 Semester I/2015/2016 Engineering and Technology Management (Polytechnic Kulim: MPSW 5053)
Post Graduate (Offshore)
35 Semester I/ 2015/2016 Engineering and Technology Management (Infineon: MPSW 5053)
Post Graduate (Offshore)
36 Semester II/ 2015/2016 Industrial Engineering (BMFP 3513)
Undergraduate
37 Semester II/ 2015/2016 Manufacturing Strategy (BMFP 4563)
Undergraduate
38 Semester II/ 2015/2016 Advanced Manufacturing Service Management (MTKA 5213)
Post Graduate (MBA)
-
3
NO SEMESTER/SESI SUBJECT LEVEL
39 Semester II/ 2015/2016 Facilities Planning (UTeM: MMFD 5053) Post Graduate (UTeM)
40 Semester II/ 2015/2016 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
41 Semester II/ 2015/2016 Engineering and Technology Management (PMS: MPSW 5053)
Post Graduate (Offshore)
42 Semester I/2016/2017 Manufacturing System (BMFG 2113) Undergraduate
43 Semester I/2016/2017 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
44 Semester I/2016/2017 Engineering and Technology Management (Infoera Penang: MPSW 5053)
Post Graduate (Offshore)
45 Semester I/2016/2017 Facilities Planning (Poli JB: MMFD 5053) Post Graduate (Offshore)
46 Semester II /2016/2017 Industrial Engineering (BMFP 3513) Undergraduate
47 Semester II /2016/2017 Manufacturing Strategy (BMFP 4563) Undergraduate
48 Semester II /2016/2017 Facilities Planning (UTeM: MMFD 5053) Post Graduate (UTeM)
49 Semester II/2016/2017 Engineering and Technology Management (Melaka: MPSW 5053)
Post Graduate (Offshore)
50 Semester II/ 2016/2017 Management of Global Manufacturing Operations (Melaka: MMFU5033)
Post Graduate (Offshore)
51 Semester II/ 2016/2017 Management of Global Manufacturing Operations (Penang: MMFU5033)
Post Graduate (Offshore)
52 Semester III/ 2016/2017 Manufacturing System (BMFG 2113) Undergraduate
53 Semester I/ 2017/2018 Manufacturing System (BMFG 2113) Undergraduate
54 Semester I/ 2017/2018 Occupational Safety and Health Diploma
55 Semester I/ 2017/2018 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
56 Semester I/ 2017/2018 Engineering and Technology Management (Poli JB: MPSW 5053)
Post Graduate (Offshore)
57 Semester II/ 2017/2018 Occupational Safety and Health (BMFG 4662) Undergraduate
58 Semester II/ 2017/2018 Manufacturing Management (DMFD 2513) Diploma
59 Semester II/ 2017/2018 Industrial Engineering (BMFP 3423) Undergraduate
60 Semester II/ 2017/2018 Lean Manufacturing (UTeM: MMFS 5033) Post Graduate (UTeM)
61 Semester II/ 2017/2018 Lean Manufacturing (Melaka: MMFS 5033) Post Graduate (Offshore)
62 Semester II/ 2017/2018 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
63 Semester II/ 2017/2018 Engineering and Technology Management (Muadzam: MPSW 5053)
Post Graduate (Offshore)
64 Semester II/ 2017/2018 Facilities Planning (UTeM: MMFD 5053) Post Graduate (UTeM)
65 Semester III/ 2017/2018 Industrial Engineering (BMFP 3423) Undergraduate
66 Semester III/ 2017/2018 Manufacturing Management (BMFP4413) Undergraduate
67 Semester I/ 2018/2019 Manufacturing Management (BMFP4413) Undergraduate
68 Semester I/ 2018/2019 Manufacturing System (BMFG 2113) Undergraduate
69 Semester I/ 2018/2019 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
70 Semester I/ 2018/2019 Lean Manufacturing (Melaka: MMFS 5033) Post Graduate (Offshore)
71 Semester I/ 2018/2019 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (Offshore
72 Semester II/ 2018/2019 Industrial Engineering (BMFP 3423) Undergraduate
73 Semester II/ 2018/2019 Lean Six Sigma Undergraduate
74 Semester II/ 2018/2019 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
75 Semester II/ 2018/2019 Engineering and Technology Management (Melaka)
Post Graduate (Offshore)
76 Semester I/ 2019/2020 Manufacturing Management (BMFP4413) Undergraduate
77 Semester I/ 2019/2020 Manufacturing System (BMFG 2113) Undergraduate
78 Semester I/ 2019/2020 Engineering and Technology Management (UTeM: MPSW 5053)
Post Graduate (UTeM)
79 Semester I/ 2019/2020 Engineering and Technology Management (Melaka)
Post Graduate (Offshore)
-
4
2. Awards
1. Excellent Service Award 2008.
2. Excellent Service Award 2014.
3. Gold : ITEX2014 (MESTI MALACCA ECO STYLISH TILES) ,2014
4. Gold : UTeMEX 2015 (Ilean2u) ,2015
5. Anugerah Penerbitan Buku Bidang Sains dan Teknologi 2016.
6. Gold : MIIEX2016 (SUCI-MALE URINAL KITS (S-MUK) , 2016
7. Silver : MINI UTeMEX2016 (Mommy Chair) , 2016
8. Silver : MINI UTeMEX2016 (Reconfigurable conveyer system(RECONV) , 2016
9. Silver : MINI UTeMEX2016 (SUCI-URIS) , 2016
10. Gold : MTE 2017
11. IDECON/MS 2017 : Incentive Awards
12. Winner 1st Place: Arch Competitor UTeM 2017
13. Silver : SUCI-URINAL SYSTEM (SUCI-URIS) 8th Exposition on Islamic Innovation (i-INOVA) 2018
14. Silver : SUCI-URINAL SYSTEM (SUCI-URIS) : Anugerah Intelek Negara 2018.
15. Best Paper Award (International Delegate) “Building Small-Medium Industry Institution Towards Sustainable
Dynamic Small Industry”, 22nd Conference of the Asian Forum on Business Education, Co-hosted by
Sampoerna University, Jakarta, 6 -7 December 2018,
16. Best Presented Paper, Enhancing the Automatic Quality Inspection in Manufacturing Process through
Parameter Optimization International Conference on Engineering and Management in Industrial System, 8-
9th August 2019, Atria Hotel Malang, Indonesia.
17. Best Paper Award, Enhancing electronic document control approval process through a verification stage,
International Conference on Design and Concurrent Engineering 2019 & Manufacturing Systems Conference
2019, Tohoku University, Sendai, Japan, September 23-24 2019.
18. Best Presented Paper Award, Development of a Simulation Based Kanban System for Lean Practitioners ,
International Conference: The Japan Society of Mechanical Engineers 29th Design Engineering and Systems
Division Lecture (D&S2019), at Katahira Campus, Tohoku University,Sendai, Japan
III. Main Areas of Research Interest:
Industrial Engineering; Manufacturing System; Lean Manufacturing; Simulation; Technology Management
IV. Completed/On-going research project since 2005
1. PJP/2007/FKP (23)-S371: Productivity analysis at a Textile Manufacturing Company, 2007-2009, RM10, 000,
Co-Researcher, Completed.
2. FRGS/2008/FKP (1) F0066: The effect of Jig Design to Hand Muscles Activities, 2008-2010, RM70, 000,
Co-Researcher, Completed.
3. PJP/2008/FKP (10) S428: Productivity Improvement: A Case Study at Communication Manufacturing
Company, 2008-2009, RM10, 000, Project Leader, Completed.
4. PJP/2009/FKP (16F) S584: The Implementation of Risk Management In An Aerospace Manufacturing
Company, 2009-2010, RM10, 500, Project Leader, Completed
5. FRGS/1/2014/TK01/FKP/02/F00224: A new approach of flow visualization technique using slanted glass to
enhancement plastic part quality, 2014-2016, RM90,000, Co-Researcher, Completed.
6. PJP/2014/FKP(9C)/S01362: Development on new framework of waste quantification using intelligent agent-
based approach, 2014-2016, RM14,800, Project Leader, Completed.
https://www.jstage.jst.go.jp/article/jsmedsd/2018.28/0/2018.28_2202/_article/-char/ja/
-
5
7. PJP/2014/FKP(1A)/S01304: Modeling Robotic Teaching for Technical Education Competency based on
Kansei Engineering Analysis,2014-2015, Co-Researcher, Completed.
8. PJP/2014/FTMK/PROTOTAIP/S01378: A Prototype development for IRIS Identification System,2014-2015.
Co-Researcher, Completed.
9. FRGS/1/2015/TK03/FKP/02/F00278: Manufacturing Excellence for Malaysian SMES through Hybrid Quick
Response Manufacturing Framework, 2015-2018, Co-Researcher, Completed.
10. FRGS/1/2015/TK10/FKP/02/F00284: A New Approach of Cryogenic (Co2) Cooling in High Speed Turning Of
Titanium Alloy, Co-Researcher, On-going.
11. PJP/2016/FKP-AMC/SC1500: A Concept of Cyber Physical Programmable Controlled Material Handling
System,2016-2017. Co-Researcher, Completed.
12. PJP/2016/FKP-AMC/S01052:Development of Manufacturing layout design evaluation technique using
simulation modeling with ergonomics integration. Co-Researcher, On-going.
13. PJP/2017/FKP/SC1500: Development and Fabrication of Suci-Male Urinal Kits (S-MUK) for Elderly,2017.
Co-Researcher, Completed.
V. Supervisor for postgraduate students since 2007
A. Master by Research
1. Mohamad Amran Bin Ibrahim,” Quantifying waste in manufacturing simulation by intelligent agent-based
approach” MSc, 2017, Supervisor, (Completed).
2. Anuar Bin Ishak, Developing Quality Management in Biological Industrial Effluent Treatment System (IETS)
Operation by the Industries in Melaka, MSc, 2018, Supervisor (Completed).
3. Rashitah Binti Rahmat, To improve Silterra’s Paperless Document Control System by Automation and
Transparency, MSc , 2015-2018, Supervisor, (On Going)
4. Muhammad Shammi Razak, The Effect of Cryogenic (CO2) Cooling on surface integrity of titanium alloy in
high speed turning. MSc , 2016-2018, Co-Supervisor, (On Going)
5. Robert Ng Hock Leong, A simulation-based approach for reconfiguration of facilities layout design under
stochastic product, MSc, 2018-2020, Co-Supervisor, (On Going)
6. Manar K.AALKahlout, “ Capsules Vs Tablets forms formulation and its efficacy among the patients in Qatar ”,
MSc, 2019 , Supervisor, (On Going)
B. Master by Thought Course
1. Siti Nurfatihah Binti Ab Rashid, Implementation of Value Stream Mapping in a Textile Manufacturing Company
for Waste Elimination. M.Eng, 2014, Supervisor, (Completed).
2. Muhammad Hazwan Bin Arzmi, Improving Die Exchange Process in Textile Manufacturing Company with
Single Minute Exchange Die (SMED). M.Eng, 2014, Supervisor, (Completed).
3. Sivakumar A/l Mani Raj, Electronic Nonconformance reporting effectiveness in Aerospace Industry. M.Eng,
2014, Supervisor, (Completed).
4. Zaleha Binti Yaakub, Development of the online management system for inventory: A Case Study at the
central store in PKB. M.Eng, 2014, Supervisor, (Completed).
5. Ahmad Syafiq Bin Moh Yunus, Proposal of OEE Simulation Decision Support Tools for Lean Practitioners,
M.Eng, 2016, Supervisor, (Completed).
6. Nurusshahidah Binti Tamby Suleiman, A Kaizen Based Approach for Lean Manufacturing Based
Implementation: A Case Study, M.Eng, 2016, Supervisor, (Completed).
7. Mohamad Muzammir Rosli, Optimizing the changeover of packaging machine by implementing single minute
exchange of Dies (SMED) in Textile Manufacturing Industry,M.Eng, 2016, Supervisor, (Completed).
8. Nor Wahida Hasbullah, Implementation of Lean Manufacturing Techniques in Service Industries, M.Eng,
2016, Supervisor, (Completed).
-
6
9. Iviana Anak Jiga, Service optimization by using simulation at Road and Transport Department Melaka, M.Eng,
2016, Supervisor, (Completed).
10. Elyiana Sari Sumaidy, Ergonomic Chair for Postpartum Mothers, M.Eng, 2016. Supervisor, (Completed).
11. Nur Halimah Jamalulil, Implementation of QR code in cloud-based manufacturing framework, M.Eng, 2016.
Supervisor, (Completed).
12. Usha Nantini A/p Perumal, Design and Implement Test Data Navigator Tool (TDN) for Semiconductor
Manufacturing Industry, M.Eng, 2016. Supervisor, (Completed).
13. NurHazimah Binti Mohd Hamka , A Study of The Readiness of Malaysia’s Manufacturing Industries in
Implementing Industry 4.0 Concept , M.Eng, 2017, Supervisor ,(Completed) .
14. Hussein T.Saed Balrwein, Evaluation of the skills gap for progression towards the fourth industrial revolution
in Libya. M.Eng, 2018, Supervisor, (Completed)
15. Hozaifah Alneaimi, Quality enhancement in production of safety pins through the implementation of kaizen
activity, M.Eng, 2018, Supervisor, (Completed)
16. Muhammad Roshidi Bin Mustaffa Kamal, Managing Queuing problems through Online Booking System,
M.Eng, 2018, Supervisor, (Completed)
17. Shahrinna Binti Mohd Salleh, The effects of Human Factors on the job performance of female workers in
malaysia , M.Eng, 2018, Supervisor, (Completed)
18. Muthanna Ali Mousa Algalos, The implementation of Risk Management at Beverage Manufacturing Company,
M.Eng, 2019, Supervisor, (Completed).
19. Azman Hafiidz Aji, Development of smartphone Application System to Improve Facility Management System
in Johor Bahru Sentral, M.Eng, 2019, Supervisor, (Completed).
20. Elnie Carina Anak Jiga, Measuring Overall Equipment Effectiveness (OEE) of pressure die casting machine,
M.Eng, 2019, Supervisor, , (Completed).
21. Nurdiyanah Nasuha Shah Fenner Khan, Optimization of Assembly line Using Discrete Event Simulation,
M.Eng, 2019, Supervisor, , (Completed).
C. PhD
1. Nor Asmaa alyaa Binti Nor Azlan, Robust Algorithm for production planning optimization of mixed linear and
non-linear problem, 2016-2019, Supervisor, (On Going).
2. Oesman Raliby, Designing Integrated Sustainability Model for Small Medium Industry Agility, 2017-2020,
Supervisor, (On Going).
3. Mohd.Soufhwee Abd Rahman, Lean Manufacturing Decision Support Systems through Big Data
Transformation, 2018-2021, Supervisor, (On Going).
4. Abdulla Hamad Obaid Hamad Alghafli, Signal Intersection Model to Enhance Traffic Safety, 2018-2021,
Supervisor, (On Going).
5. Taher Khalaf Barakat Ayoub, The impact of Industry 4.0 on manufacturing supply chain management in
Malaysia, 2018-2021, Co-Supervisor, (On Going).
6. Tareq Humaid Mohammed Almaskari, Factors of Universities Innovation Culture and Its Impact On Students
Innovation Capabilities in UAE, 2018-2021, Supervisor, (On Going).
7. Shamsa Rashid Saeed Ali Alhefaiti, The Importance of Exploring The future and Its Role in The Optimization
Processes, 2018-2021, Supervisor, (On Going).
-
7
D. Senarai Penyeliaan Pelajar Ijazah Sarjana Muda Undergraduate Final Year Projects Supervision
1. Mohamad Hairi Bin Edin, Assessment of Manual Load Lifting For Workers in Construction Area, 2007/2008,
Completed.
2. Mohd Shazwan Bin Mohd Alias, Analysis of Human Hand Strength for Gripping Activity in Manufacturing
Industry, 2007/2008, Completed.
3. Siti Zubaidah Salehudin, Productivity Improvement: A case study on implementation of Quality Management
at Communication Manufacturing Company, 2008/2009, Completed.
4. Haslina Mohamad, Work study assessment for productivity improvement at Communication Manufacturing
Company, 2008/2009, Completed.
5. Muhammad Hafiz Ahmad, Case study “A study on overall equipment effectiveness at Electronics
manufacturing company”, 2008/2009, Completed.
6. Norain Md Shah, Work Study utilizing M.O.S.T at aerospace manufacturing company: “Case study at A320
Aft Fixed & Moveable Fairing Project, 2008/2009, Completed.
7. Nor Shahidah Ayob, Implementation of Kanban System at Automotive Industry, 2008/2009, Completed.
8. Norhelmy Rominor, Work-study Utilizing M.O.S.T at Aerospace Manufacturing Company: “A case study at
A320”. 2008/2009, Completed.
9. Nor Haslina Sobiren, The Implementation of Risk Management at Aerospace Manufacturing Company,
2008/2009, Completed.
10. Khairul Amilin Bin Mohd Nor, The Implementation of Risk Management at Communication Manufacturing
Company. 2009/2010, Completed.
11. Mohd Ariffudin Bin Abd Rahman, Implementation of Productive Maintenance (PM) at Communication
Manufacturing Company, 2009/2010, Completed.
12. Mohamad Faidzal Bin Razali, Productivity Improvement: The Implementation of 7QC tools at Communication
Manufacturing Company, 2009/2010, Completed.
13. Nurul Izni Binti Johari, The Implementation of Risk Management at Metal Industry (Case study: Safety),
2009/2010, Completed.
14. Noorfizlen Mohd Nasir, The Implementation of Risk Management at Metal Industry (Case study: Process
(FMEA), 2009/2010, Completed.
15. Mohd Aminudin Bin Abdullah, The Implementation of Risk Management at Aerospace Company (Case study:
Process (FMEA), 2009/2010, Completed.
16. Afifah bt. Mohd Fauzi, The Implementation of Risk Management at Aerospace Company (Case study: Process
(Safety), 2009/2010, Completed.
17. Mohd Haneef Bin Mohd Nasir, SDSS: Decision Support for Lean Practitioners, 2013/2014, Completed.
18. Amirah Bt. Mohd Arif, Assessing the implementation of Quality Management in Manufacturing Industry using
ISO Framework: A Case Study, 2013/2014, Completed.
19. Siti Amirah Binti Mohamad Noor, Productivity Enhanced by Overall Equipment Effectiveness (OEE)
Improvement in Textile Industry, 2014/2015, Completed.
20. NurHazimah Binti Mohd Hamka, Implementation of Value Stream Mapping in a Textile Manufacturing
Company for Waste Reduction, 2014/2015, Completed.
21. Shahrinna Binti Mohd Salleh, Implementation of Overall Equipment Effectiveness (OEE) in textile
manufacturing company for productivity improvement, 2014/2015, Completed.
22. Noraina Alia Mat Noor, A Simulation Based Approach to Decision Support for Lean Practitioners, 2014/2015,
Completed.
23. Shariful Redzuan Naquiddin Bin Abd lah, A Development of Simulation Based on Kanban system For Lean
Practitioners, 2014/2015, Completed.
24. Mohamad Khairil Bin Anuar, Development of a simulation based OEE Support System (OEESS), 2015/2016,
Completed.
-
8
25. Nirmessini Maselah Mani, Application of Kaizen to Prevent Slip of Defective Product to Internal Customer in
Automobile Manufacturing, 2015/2016, Completed.
26. Nur Syahirah Binti Shafie, Productivity improvement in packaging line at textile manufacturing company,
2015/2016, Completed.
27. Nur Zarifa bt Nek, Simulation Study Towards Productivity Improvement in Composites Manufacturing,
2015/2016, Completed.
28. Roshaniffah Adilah bt Mohd Noor, Implementing of bar code scanning on warehouse, 2015/2016, Completed.
29. Nursyuhada Mat Adam; Setup Time Reduction of Snap Fastener machines by implementing Single Minute
Exchange of Die (SMED), 2016/2017, Completed.
30. Nor Azatu Fasya Azman; Elimination of product shortage at dispatch line in manufacturing industry by using
lean tools, 2016/2017, Completed.
31. Amiza Aliyana Binti Zamuri ; Reduce rejection on nickel free plating at finishing line in metal manufacturing
company by using Kaizen approach; 2016/2017, Completed.
32. Norhafizah Binti Hamdan ; Simulation study towards time waste reduction in service industry; 2016/2017,
Completed.
33. Mustafa Kumtepe; Scrap reduction by implementing kaizen activities in metal manufacturing company ;
2016/2017, Completed.
34. Mohammad Najeh Ali Taha; A study on strategies for reducing production cycle time in a semiconductor
industry; 2016/2017, Completed.
35. Khairul Azwan Mat Nasir, Quality Improvement by implementing kaizen activities in textile manufacturing
company, 2017/2018, Completed.
36. Lee Sing Chi, Waste Reduction of Safety Pin by implementing kaizen activities in textile manufacturing
company, 2017/2018, Completed.
37. Tan Yon Shern, Readiness of Malaysia Manufacturing Companies in Implementing Industry 4.0, 2017/2018,
Completed.
38. Kua Ann Nee, Proposal of OEE Decision Support Tools for Lean Practitioners, 2018/2019, Completed.
39. Mohammad Afif Embok Resa, Optimizing the Changeover of Vacuum Casting Machine by Implementing
Single Minute Exchange of Dies, 2018/2019, Completed.
40. Choong Kai Yuen, Waste Reduction by Implementing Kaizen Activities in Manufacturing Company,
2018/2019, Completed.
E. Diploma Projects Supervision
2014/2015 sessions
1. Mohamad Izat Afifi Rosli , D05111015
2. Nur Salsabila Safee, D05111079
3. Tunku Aidil Ilham Bin Tunku Adaham , D051110109
4. Mohd Shahrul Hafidz Shahrul Nuwii , D051110121
F. Integrated Design Project (IDP) Supervision
Sesi 2015/2016 sessions
1. Muhammad Ezzaq Elfi bin Rafie ,B051310070
2. Muhammad Akmal Lizam bin Anuar,B051310279
3. Nur Amirah binti Arif ,B051410028
4. Afifah Raihana binti Mohd Nor,B05141003
5. Muhammad Hafizudin Mohd Salleh , B051210065
-
9
Sesi 2016/2017 sessions
1. Khairul Azwan Bin Mat Nasir, B051410264
2. Muhammad Faizal Bin Abu Bakar,B051410282
3. Badrul Ridhwan Bin Kamarol Hisham,B051410180
4. Azza Zuwany Binti Din,B051410187
5. Noor Amni Anas Binti Adiris,B051410262
Sesi 2017/2018 sessions
1. Amirah Nasiha Mohd Zali B051510200
2. Evelyn Justin B051510255
3. Nur Iylia Malaya B051510148
4. Rozieani Abd Razim B051510231
5. Wan Nur Amirah Wan Muhamad B051510226
Sesi 2018/2019 sessions
1. Nudra Syafina Mohd Yazid B051610067
2. Roderick Evan Lindungan B051810191
3. Alivia Kirana Hartono Putri B051810193
4. Nuraliana Nadirah Mohd Ariffin B051610174
5. Jason Calvin A/l Dominic B051610110
VI. Chairman (VIVA-VOCE)
1. Candidate Name : Ong Cheng Guan
Programme : MSc. Manufacturing Engineering
Date/Year : 14th September 2017
Institution: Faculty of Manufacturing,UTeM
2. Candidate Name : Chong See Ying
Programme : MSc. Manufacturing Engineering
Date/Year : 29th Dicember 2017
Institution: Faculty of Manufacturing,UTeM
3. Candidate Name : Sam Mei Lee
Programme : MSc. Manufacturing Engineering
Date/Year : 14th Feb 2018
Institution: Faculty of Manufacturing,UTeM
4. Candidate Name : Mohamad Aqil Bin Mohd Fuad
Programme : MSc. Electrical Engineering
Date/Year : 18th March 2019
Institution: Faculty of Electrical Engineering , UteM
5. Candidate Name : Masitah Binti Abdul Lateh
Programme : MSc. In Information and Communication Technology
Date/Year : 9th July 2019
Institution: Faculty of Information and Communication Technology , UTeM
VII. Internal Examiner
1. Candidate Name : Nor Kamariah Binti Mohamad Khalid
Programme : MSc. Manufacturing Engineering
Thesis Title : Developement of E-Tool for Simulating Value Stream
Year : 2014
Institution: Faculty of Manufacturing,UTeM
-
10
2. Candidate Name : Deborah Chow Yen May
Programme : M.Eng. Manufacturing Engineering (By Thought course)
Thesis Title : Evaluation of NPD with KM-QFD Tool for quality improvement : Case Study
Year : 2014
Institution: Faculty of Manufacturing,UTeM
3. Candidate Name : Muhammad Faishal
Programme : M.Eng. Manufacturing Engineering (By Thought course)
Thesis Title : Waste reduction in line production through agile manufacturing
Year : 2015
Institution: Faculty of Manufacturing,UteM
4. Candidate Name : Mohd Hazaoma Abu Hasan
Programme : MSc. Manufacturing Engineering
Thesis Title : A service quality assessment based upon manufacturing industries perception to state
goverment of Melaka
Year : 2016
Institution: Faculty of Manufacturing,UTeM
5. Candidate Name : Nurul Aini Binti Ahmad
Programme : MSc. Manufacturing Engineering
Thesis Title : An Integrative Model of Responsiveness and sustainability requirements for automotive
industry
Year : 2016
Institution: Faculty of Manufacturing,UTeM
6. Candidate Name : Hammam MH Safady
Programme : M.Eng. Manufacturing Engineering (By Thought course)
Thesis Title : Industrial Robotics in the Lean Enterprise – A Case Study
Year : 2016
Institution: Faculty of Manufacturing,UTeM
7. Candidate Name : Hamizan Osman
Programme : MSc. Manufacturing Engineering
Thesis Title : Sensitivity Analysis For New Paint Shop Investment In Automotive Industry
Year : 2017
Institution: Faculty of Manufacturing,UTeM
8. Candidate Name : Bong Cheng Siong
Programme : PhD Engineering
Thesis Title : Improving Delivery Performance At Engineer – To – Order Company Through Hybrid Quick
Response Manufacturing.
Year : 2019
Institution: Faculty of Manufacturing,UTeM
9. Candidate Name : Nor Rizan Mohamad
Programme : MSc. Manufacturing Engineering
Thesis Title :A Concept of Reconfigurable Conveyor System To Support Chaneability In Manufacturing.
Year : 2019
Institution: Faculty of Manufacturing,UteM
10. Candidate Name : Nurul Nasreen Mohd Hashim
Programme : M.Eng. Manufacturing Engineering (By Thought course)
Thesis Title : "Thinking" Production System To Increase Performance In The Assembly Line
Year : 2019
Institution: Faculty of Manufacturing,UTeM
-
11
VIII. External Examiner
1. Candidate Name : Nurulhuda Binti Abu Bakar
Programme : Mixed Mode Programme Master of Science (Manufacturing Systems Engineering)
Thesis Title : “Reliability Centered Maintenance Methodology for Product in Design Phase : A case study
on Dough Presser”
Year : 2017
Institution: Universiti Malaysia Perlis
2. Candidate Name : Shazzuan Bin Shahari
Programme : Mixed Mode Programme Master of Science (Manufacturing Systems Engineering)
Thesis Title : “Warpage Minimization on Side Arm Using Response Surface Method (RSM)
Year : 2017
Institution: Universiti Malaysia Perlis
3. Candidate Name : Mohd Syazwan Faiz Soberi
Programme : Master of Science (Manufacturing Engineering)
Thesis Title : Improved version of single minute exchage of die (SMED) with Fuzzy –Analytic Hierarchy
Process (F-AHP) Method for Setup Time Reduction.
Year : 2017
Institution: Universiti Malaysia Perlis
4. Candidate Name : Nurul Hidayah Junaidi
Programme : Mixed Mode Programme Master of Science (Manufacturing Systems Engineering)
Thesis Title : Critical Components Indentification Using Analytic Hierarchy Process (AHP) – A Case
Study Towards Product Design Improvement.
Year : 2017
Institution: Universiti Malaysia Perlis
5. Candidate Name : Tan Sze Pei
Programme : Master of Science (Manufacturing Engineering)
Thesis Title : A Numerical Study Of Oblique Impact On Crashworthiness
Year : 2019
Institution: Universiti Malaysia Pahang
IX. Professional Memberships
1. Board of Engineer Malaysia, Register Number: 47288R, Status: Active.
2. The Japan Society of Mechanical Engineers (JSME) (1038837) ; Status: Active.
3. IEM, Register Number : 66712 ; Status: Active.
4. MySet , Register Number : MS#01370 ; Status: Active.
5. Majlis Rekabentuk Malaysia (MRM) : 1-A-000241-2013 ; Status: Active.
6. Institution of Engineering and Technology (IET) : Member ; 1100394333; Status: Active.
7. Professional Technologists (Ts.) : PT18120018
X. Collaborations Patner (MOU/MOA)
1. Global Double Degree Program , Tokushima University / MoA
2. Penubuhan Pusat Akademik Utem-Universiti Tokushima, Tokuhsima University / Mou
3. UTeM- PSU, Thailand /Mou
4. UTeM – Universiti Merdeka Malang, Indonesia (Coordinator)
5. UTeM – Universiti Negeri Malang, Indonesia (Coordinator)
-
12
XI. Nonfunded Project
1. Prym Consumer Sdn Bhd 2013 -till know
2. Ayer Keroh Health Clinic
3. MIDA
XII. Innovation
1. Pattern
a) Malacca Eco Stylish Tiles (MeStil)_ LY2014000525
b) Spray Male Catheter _ LY2016001495
2. Copyright
a) Mommy Chair_LY2016002571
b) Reconfigurable Conveyer System (RECONV) _LY2016002572
c) ILEAN2U_LY2016000106
XIII. Editor/Editoril Board Journal
a) Editorial Board JAMT 2017-2019. (Scopus)
b) Editorial Board Journal of Engineering and Management in Industrial System (Indexed)
c) Editor Special Issue UTM Jurnal Teknologi /TMAC Symposium 2016 (Scopus)
d) Editor Special Issue UTM Jurnal Teknologi /IDECON 2016 (Scopus)
e) Editor Special Issue JTEC /IDECON 2016 (Scopus)
f) Editor Special Issue JAMT/IDECON 2016 (Scopus)
g) Editor Special Issue JAMT/ TMAC Symposium 2017 (Scopus)
h) Editor Special Issue JAMT Vol 11(1) /IDECON 2018 (Scopus)
i) Editor Special Issue JAMT/ Vol 11(1)/ IDECON 2018 (Scopus)
j) International Editorial Board Journal of Engineering and Management in Industrial System 2019
XIV. Reviewer Journal
1. CERA -14-0077 " Application of Six Sigma in small company, CERA Publication
2. Journal of Advanced Manufacturing Technology _ Experimental evaluation of mechanical properties of Tin Composite (Tin, Rice Husk and Silicon Carbide) for sustainable production tooling.
3. JET_The reality of relationship between the HRM Practices and Organizational Performance (Open The Black Box).
4. Journal of Advanced Manufacturing Technology _ Radiosensitizing Effect of Protoporphyrin IX with carbon ion beam against mouse mammry breast tumor cell
5. Journal of Advanced Manufacturing Technology _ Cleaner Production Implementation at chicken slaughtering plant
XV. Reviewer Proceeding
IDECON 2014_ Understanding Time Loss in Manufacturing Operations
IDECON 2014_ Muscle Activity of Loading Task on CNC Machine Centre Through Surface Electromyography
ICoMEIA 2014_Paper 124
ICoMEIA 2014_Paper 126
ICoMEIA 2014_Paper 459
ICME15_Paper ID-1250
ICME15_Paper ID-1211
-
13
IConGDM2016_ Paper ID_ IConGDM2016-1
IConGDM2016_ Paper ID_ IConGDM2016-3
IConGDM2016_ Paper ID_ IConGDM2016-8
IConGDM2016_ Paper ID_ IConGDM2016-10
ICEI2016_Paper ID_1570235220
ICEI2016_Paper ID_1570235675
IDECON 2016_A Framework for improving manufacturing Overall Equipment Effectiveness
IDECON 2016_Significant effect of point to point checking jig apply in kaizen to enhance product quality performance
IDECON 2016_Review on cooling curve thermal analysis of commercialized aluminium alloys
IDECON 2016_Supply Chain risk in malaysia oil and gas industry _ the double risks
IDECON 2016_Study on the modal analysis of perforated plates
IDECON 2016_Simulation modeling for lean production
IDECON 2016_Crowdfunding for research _a case study in research management centre in malaysia
IDECON 2016_Implementation of robust composite nonlinear feedback for active front steering based vehicle yaw stablity
IDECON 2016_Industry Collaboration Program (ICP) : Empowering Technology Development for National Economic
IDECON 2016_A comparison Study between simulation and experimentation of modal analysis
IDECON 2016_Comparison of CAP and QAM-DMT Modulation Format for In-Home Network Environment
DECON 2016_Modeling of systematic sustainability assessment (SSA) for the Malaysian Industry
IDECON 2016_Lean Production Increase Overall Equipment Efficiency in Manufacture Paper and Paper Products
IDECON 2016_Improving quality in electrodeposition process of light commercial vehicle
List of Major Publication since 2008.
Books
1. Mohamad, E., 2009. The Development of Key Performance Indicator [KPIs] at Aerospace Manufacturing
Company. Penerbit Universiti, Universiti Teknikal Malaysia Melaka.
2. Effendi Mohamad and Mohd Amri Sulaiman , (2016), Simulation-based approach to Lean Manufacturing,
Monograph Series, ISBN 978-967-0257-59-4, Penerbit Universiti: Universiti Teknikal Malaysia Melaka.
Proceeding
1. Effendi, M., Rohana, A., Hasrulnizzam, W. and Mahmood, W., 2008. The level of achievement of Lean
Manufacturing Implementation status before and after the development of KPIs at an Aerospace
Manufacturing Company. International Conference on The Roles of the Humanities and Social Sciences in
Engineering 2008 (ICoSHE 2008), 5th -6th December 2008.
2. Adi, S., Effendi, M. and and Lon W.K., 2008. “A process Capability and Cost Appraisal for Quality Control
Problems A Case Study at Candy Manufacturer” National Conference on Design & Concurrent Engineering
2008, 28th-29th October 2008. ISBN 978-983-2948-54-4.
3. Abdullah, R., Mohamad, E. and Muhamad, M.R., 2008. Managing Key Performance Indicators (KPIs): A Case
Study at an Aerospace Manufacturing Facility. KMICE, Langkawi, 10th- 12th June 2008. ISBN: 978-983-3827-
72-5.
-
14
4. Wan Mahmood, W.H., Mohamad, E. and Muhamad, Abdullah A.R, Enhancement of Training in Manufacturing
Company. KMICE, Langkawi, 10th- 12th June 2008. ISBN: 978-983-3827-72-5.
5. Abdullah, R., Saptari, A, Halim, I, and Mohamad, E.2008. Simulation Modelling for Balancing and Optimizing
a Digital Measuring Device (DMD) Production Line. International Conference on Mechanical and
Manufacturing Engineering (ICME) May, 2008.
6. Wan Mahmood, W.H., Ebrahim, Z., and Mohamad, E., 2008, Enhancement of Training in Manufacturing
Company. Development of an Office TPM for Lecturer’s Room, National Management Conference 2008.
ISBN: 978-983-9842-32-6.
7. Mohamad, E., Sallehuddin , S.Z., Saptari ,A, Salleh, M.R and Mohamad,N.A., 2009, Productivity Improvement
: A Case Study On Acceptance Level (AQL) Implementation at Communication Manufacturing Company,
International Conference On Quality, Productivity and Performance Measurement , ICQPPM’09 , 16th -18th
May, 2009.
8. Rohana, A., Effendi, M. and Saptari, A., 2009. Productivity analysis towards lean manufacturing at a textile
manufacturing company, Malaysian Technical Universities Conference on Engineering and Technology
(MUCET 2009), 20th- 22th June 2009.
9. Ito, T. and Mohamad, E. 2010. Simulation study towards productivity improvement in Manufacturing.
In Kyushu Branch of Japan Society of Mechanical Engineers, Tokushima Conference (No. 105-2, pp. 125-
126).
10. Mohamad, E. and Ito, T., 2011, October. University-industry collaboration in lean manufacturing
implementation. In Proceedings of 2nd Asian Conference on Engineering Education. pp SS3-6:1 – pp.SS3-
6:6.
11. Mohamad, E.B. and Ito, T., 2011. S141011 Simulation-based CAI System for Kanban Scheduling. 年次大会
, 2011, pp._S141011-1.
12. Ito, T. and Mohamad, E.B., 2011, March. 312 Comparison of material handling solutions in assembly
production line. In The Proceedings of Manufacturing Systems Division Conference 2011 (pp. 81-82). The
Japan Society of Mechanical Engineers.
13. Ito, T. and Mohamad, E.B., 2011, ‘Material handling simulation model for assemble production line’, Chugoku-
Shikoku Branch of Japan Society of Mechanical Engineers (JSME), 49th General Conference, Mar. 2011,
Okayama Science University Japan, Vol.115, No.1, pp.55—56.
14. Mohamad, E.B. and Ito, T., 2011. ‘Simulation-based Computer Aided Instruction System in Teaching and
Training of Lean Manufacturing’, Design Engineering Workshop organized by JSME Design and Systems
Divisions, Japan and The Society of CAD/CAM Engineers Korea, November 24-26 2011, National Institute of
Advanced Industrial Science and Technology (AIST) Kyushu, Tosu, Saga, Japan, pp.118-123
15. Mohamad, E. and Ito, T., 2012. Development of a simulation-based SMED training system. In The first
International Symposium on Socially and Technically Symbiotic Systems (STSS 2012), Okayama, Japan (pp.
46-1).
16. Mohamad, E. and Ito, T., 2012. ‘A proposal of a simulation-based SMED training system’, Proceedings of
2012 Design Engineering Workshop (DEWS2012), Seoul, South Korea, June 2012, pp.115-120.
17. Mohamad, E. and Ito, T., 2012. ‘Development of a prototype system for Lean Manufacturing CAI’, Chugoku-
Shikoku Branch of Japan Society of Mechanical Engineers (JSME), 50th General Conference, Mar. 2012,
Hiroshima University, Japan, p.410
18. Mohamad, E., Ito, T. and Yuniawan, D., 2013. A simulation-based approach to decision support for lean
practitioners. In 20th ISPE International Conference on Concurrent Engineering: Proceedings (p. 277). IOS
Press.
19. Yuniawan, D., Mohamad, E. and Ito, T., 2013. 1A1 OEE measurement by taguchi method with simulation
(Technical Session 1A: Manufacturing Systems and Scheduling 1). In Proceedings of International
Symposium on Scheduling (Vol. 2013, pp. 1-4). 日本機械学会.
-
15
20. Ito, T., Mohamad, E.B. and Yuniawan, D., 2013, March. 216 A process model of coolant hose factory for lean
manufacturing simulation. In The Proceedings of Manufacturing Systems Division Conference 2013 (pp. 105-
106). The Japan Society of Mechanical Engineers.
21. Ito, T., Mohamad, E. and Salleh, M.R., 2013, January. A student mobility program through cross cultural and
technical exposure. In JSME No. 13-205 The 13th Design Engineering Workshop 2013 (No. 13, pp. 1-6).
22. Yuniawan, D, Ito, T and Mohamad, E., 2013, A proposal of total productive maintenance training
system, In JSME No. 13-205 The 13th Design Engineering Workshop 2013 (No. 12, pp. 1-5).
23. Mohamad, E, Ito, T and Yuniawan, D (2013), Lean Manufacturing Tools Training System, In JSME No. 13-
205 The 13th Design Engineering Workshop 2013 (No. 14, pp. 1-6).
24. Dani Yuniawan, Teruaki Ito and Effendi Mohamad (2014) , Measurement of Production Line Performance on
OEE Extension , Japan Society of Mechanical Engineers Production Systems Division Research Conference
of 2014, Proceeding, Vol.14, No.7, p.306, Mar. 2014.
25. Effendi Mohamad, Teruaki Ito and Dani Yuniawan (2014), Simulation-based decision support system for lean
practitioners, Japan Society of Mechanical Engineers Production Systems Division Research Conference of
2014, Proceeding, Vol.14, No.7, p.302, Mar. 2014.
26. Effendi Mohamad, Siti Nur Fatihah Ab Rasid, Teruaki Ito, Mohd Amran Md Ali, Mohd Amri Sulaiman Mohd
Ashadi Azam and Adi Saptari , (2014) “An initiative to implement lean manufacturing using value stream
mapping in textile manufacturing company” , p2309, 24th Design Engineering Systems Division JSME
Conference [No.14-27] Japan Society of Mechanical Engineers, 17-19th September , Tokushima , Japan.
27. Effendi Mohamad, Muhammad Hazwan Arzmi, Teruaki Ito, Mohd Shahir Kasim, Taufik Sahroni andMohd
Warikh Abd Rashid, (2014) “Improving Die Exchange Process in Textile Manufacturing Company with SMED”,
p2310, 24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of Mechanical
Engineers, 17-19th September , Tokushima , Japan.
28. Mohd Warikh Abd Rashid, Mohd Amri Lajis Fariza Fuziana Yacob, Mohd Asyadi Azam Mohd Abid, Effendi
Mohamad and Teruaki Ito, (2014) “A Review: The Potential of Powder Metallurgy in Recycling Aluminum
Chips (Al 6061 & Al 7075)”, p2301, 24th Design Engineering Systems Division JSME Conference [No.14-27]
Japan Society of Mechanical Engineers, 17-19th September , Tokushima , Japan.
29. Taufik Sahroni, Sirinjeev Rao Raman, Mohd Shahir Kasim, Mohd Amri Sulaiman, Effendi Mohamad and
Teruaki Ito, “Mould design analysis of casted natural fibre-metal matrix composites”, p2410, 24th Design
Engineering Systems Division JSME Conference [No.14-27] Japan Society of Mechanical Engineers, 17-19th
September , Tokushima , Japan.
30. Taufik Roni Sahroni, Mohammad Airu, shah Kamaruddin, Mohd Shahir Kasim, Mohd Amran Mohd Ali, Effendi
Mohamad and Teruaki Ito, (2014) “Design and optimization of runner and gating systems for permanent mould
casting”, p2316, 24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of
Mechanical Engineers, 17-19th September, Tokushima, Japan.
31. Saptari, A., LEAU, J.X., Mohamad, N.A. and Mohamad, E., 2014, September. 2313 Regaining Productivity
Through Line Balancing: A Case Study in an Electrical Manual Assembly Line. In The Proceedings of Design
& Systems Conference 2014.24 (pp. _2313-1_). The Japan Society of Mechanical Engineers.
32. Saptari, A., LEAU, J.X., NG, P.K. and MOHAMAD, E., 2014, September. 2309 Human Error and Production
Rate Correlation in Assembly Process of Electronics Goods. In The Proceedings of Design & Systems
Conference 2014.24 (pp. _2309-1_). The Japan Society of Mechanical Engineers.
33. Mohd Shahir Kasim ,Che Hasan Che Haron, Jaharah Abd Ghani, Raja Izamshah, Juri Saedon, Effendi
Mohamad and Teruaki Ito, (2014) Tool life assessment of untreated and aged hardening Inconel 718 during
end milling , p2315, 24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society
of Mechanical Engineers, 17-19th September , Tokushima , Japan.
34. Mohd Amri Sulaiman, Che Hasan Che Haron, Jaharah Abd Ghani, Effendi Mohamad and Teruaki Ito ,
(2014) Tool Performance of Uncoated Carbide in High-speed Turning of Titanium Ti-6Al-4V ELI , p2306, 24th
Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of Mechanical Engineers,
17-19th September , Tokushima , Japan.
-
16
35. Mohd Amal Abd. Halim ,Mohd Shahir Kasim, Mohd Amri Sulaiman, Effendi Mohamad and Teruaki Ito, (2014)
“The Effect of Cutting Parameters on Surface Roughness during End Milling of AISI D2 Tool Steel ” p2308,
24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of Mechanical
Engineers, 17-19th September , Tokushima , Japan.
36. Che Muhamad Hamzah Che Nor , Mohd Shahir Kasim, Effendi Mohamad, Mohd Amri Sulaiman and Teruaki
Ito, (2014) “Study on cutting parameter on kerf width using wire electrical discharge machining of Inconel
718”, p2314, 24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of
Mechanical Engineers, 17-19th September , Tokushima , Japan.
37. Mohd Asyadi Azam, Mohd Shahril Amin Bistamam, Nor Syafira Abdul Manaf, Effendi Mohamad and Teruaki
Ito, (2014) “Deposition of Catalyst and Catalyst-Support Thin Films for Aligned Carbon Nanotube Growth”,
p2304, 24th Design Engineering Systems Division JSME Conference [No.14-27] Japan Society of Mechanical
Engineers, 17-19th September, Tokushima, Japan.
38. Madihah Maharof, Teruaki Ito, Zamberi Jamaludin, Tomio Watanabe and Effendi Mohamad, (2014) A
Technical review on three challenges in ARM-COMS, p2302, 24th Design Engineering Systems Division
JSME Conference [No.14-27] Japan Society of Mechanical Engineers, 17-19th September, Tokushima ,
Japan.
39. Mohd Shahir Kasim, Che Hassan Che Haron, Jaharah Abd Ghani, Effendi Mohamad, Raja Izamshah, Amran
Ali Mohd, JB Saedon, (2014), Multi-Objective Optimization Using Box-Behken of Response Surface
Methodology for High-Speed Machining of Inconel 718, Applied Mechanics and Materials, Volume 629,pp
487-492.
40. Mohd Amran ,Hazwani Hilmi, Siti Salmah, Zulkeflee Abdullah, Effendi Mohamad, Liew Pay Jun and Sivaraos
, (2014), Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ /Binder using
Full Factorial Method, Advanced Research in Materials Science , Vol. 1, No.1. Pages 7-13, 2014 ISSN (online):
2289-7992.
41. Mohd Amran Md Ali, Noor Azam Jaafar, Raja Izamshah Raja Abullah, Nur Izan Syahriah Hussein, Mohd
Sanusi Abdul Aziz, Mohd Shahir Kasim, Mohd Amri Sulaiman, Mohd Hadzley Abu Bakar, Mohd Rizal Salleh,
Effendi Mohamad, Pay Jun Liew, Zulkeflee Abullah and Sivarao Subramonian (2014), Performance of Wire-
EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) using Taguchi Method, Malaysia
University Conference Engineering Technology , 10-11 November 2014, Melaka , Malaysia.
42. Mohd Shahir Kasim , Mohd Amri Sulaiman , Effendi Mohamad, Mohd Hadzley Abu Bakar, and
Mohamad Minhat, (2014), Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6 ,
iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014,
Melaka.
43. Raja Isamshar, Mohd Zulhairi, Mohd Ali Amran, Shahir Mohd Kasim, Effendi Mohamad,, Hadzley Bakar
Mohd Abu, Mohd Sanusi and Teruaki Ito , 2015,
Development of New Cutter Design for Machining Thin Wall Aerospace Component, Proceedings 25th Annual
Meeting of the Japanese Society of Mechanical Design Engineering Systems Division Research Presentation
Lecture 2015 , No.1304, pp.1--6, Sep. 2015.
44. Mohd Shahir Kasim, Mohamad Hazizan Atan, CH Che Haron, Jaharah A Ghani, Mohd Amri Sulaiman, Effendi
Mohamad, Mohamad Minhat, M Hadzley, JB Saedon,2015, Analysis of Tool Performance during Ball-End
Milling of Aluminium Alloy 6061-T6, Applied Mechanics and Materials, Vol.761,pp 318-323.
45. Raja Izamshah, Teruaki Ito, Mohd Shahir Kasim, Effendi Mohamad, Muhammad Akmal,2015, Finite Element
Simulation of Trimming CFRP Composite with Cross-Nick Cutter, Japan Society of Mechanical Engineers
Manufacturing Systems Division Research Conference of 2015, Vol.15,No 8, pp 318-323.
46. Mohd Amran Md Ali , AK Khamis, NIS Hussein, Raja Izamshah Raja Abdullah, Mohd Shahir Kasim , MH Abu
Bakar, Effendi Mohamad , Mohd Amri Sulaiman ,2015 , Performance on tensile properties of GFRP stacking
sequence using Taguchi Method , Proceedings of Mechanical Engineering Research Day 2015: MERD'15,
Volume 2015, pp 71-72, Centre for Advanced Research on Energy.
http://www.scientific.net/AMM.629.487http://www.scientific.net/AMM.629.487http://ocs.utem.edu.my/index.php/mucet2014/MUCET2014/paper/view/33http://ocs.utem.edu.my/index.php/mucet2014/MUCET2014/paper/view/33http://www.scientific.net/AMM.761.318http://www.scientific.net/AMM.761.318http://books.google.com/books?hl=en&lr=&id=TDezBwAAQBAJ&oi=fnd&pg=PA71&dq=info:l0hP9-kX1McJ:scholar.google.com&ots=dOfrPQuZGm&sig=sezh3r7yYxY496AVWtUacuCP1IQhttp://books.google.com/books?hl=en&lr=&id=TDezBwAAQBAJ&oi=fnd&pg=PA71&dq=info:l0hP9-kX1McJ:scholar.google.com&ots=dOfrPQuZGm&sig=sezh3r7yYxY496AVWtUacuCP1IQ
-
17
47. Raja Izamshah, A Yu Lung, Effendi Mohamad, Mohd Asyadi Azam, Mohd Amri, PJ Liew, Mohd Sanusi,2015,
Optimization of Milling Parameter for Untreated and Heat Treated Polyetheretherketones (PEEK)
Biomaterials, Applied Mechanics and Materials,Vol.761,pp 293-297.
48. Izamshah Raja, Zulhairi Mohd, Ali Amran Md Mohd, Kasim Shahir Mohd, Mohamad Effendi, Mohamed Bahri
Saiful, Bakar Hadzley Abu Mohd, Aziz Sanusi Abdul Mohd and Teruaki Ito, 2015,
Development of Variable Helix Cutter Design for Machining Thin Wall Aerospace Component,
Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015), No.38,
pp.1--10, Tokushima, Sep. 2015.
49. Mohd Amran, Siti Salmah, Raja Izamshah, Mohd Shahir, Mohd Amri, Effendi Mohamad, Mohd Sanusi,
Zolkarnain Marjom, Umar Al-Amani, Mohd Kamal Musa, Zulkeflee Abdullah,2015, Warpage Analysis of
Different Number Cooling Channels for Dumbbell Plastic Part in Injection Moulding, Applied Mechanics
50. Mohd Warikh Abd Rashid, Teruaki Ito, Fuziana Fariza, Effendi Mohamad, Mohd Rizal Salleh and Toshihiro
Moriga, 2016, Aluminium Alloy Recycling for Sustainable Manufacturing,
Manufacturing Systems Division Conference 2016, Tokyo University of Science, Vol 16, No.9, pp 127-128.
51. Mohd Warikh Abd Rashid , Mohd Rizal Salleh, Effendi Mohamad, Toshihiro Moriga and Teruaki Ito ,2016,
International Educational Collboration at Faculty of Manucacturing Engineering (FKP): TokushimaU-UTeM
Academic Centre, Proceedings of International Symposium on Global Engineering, pp.3--4, Mar. 2016.
52. MS Salleh , MZ Omar, K.S Alhawari, M.N Mohammed, M.A. Mad Ali and E. Mohamad, 2016, Transactions of
Nonferrous Metals Society of China, Volume 26, Issue 8, August 2016, Pages 2029-2042.
53. A.R.M. Warikh, M.H.M. Akmal, U.A.A. Azlan, N.A. Azmi, E. Mohamad, M.R. Salleh, T. Ito, T. Moriga,2016,
Preparation and properties of layer-by- layer K0.5Na0.5NbO3 thin films derived from sol-gel technique,13th
International Conference on Ceramic Processing Science, 8-11 May 2016, Nara Japan, pp 59.
54. MOHAMAD, Effendi, Eliyana Sari SUMAIDY, Muhamad Arfauz A. RAHMAN, Mohd Shukor SALLEH, Mohd
Amri SULAIMAN, Mohd Rizal SALLEH, Saifudin Hafiz YAHAYA, Teruaki ITO, and Lubnah HUSSEIN.
"Ergonomic Design Chair for Postpartum Mothers." (2017).
55. Osman, N. S., M. A. A. Rahman, AA Abdul Rahman, S. H. Kamsani, BM Bali Mohamad, E. Mohamad, Z. A.
Zaini, M. F. Ab Rahman, and MNH Mohamad Hatta. "Automated platform for designing multiple robot work
cells." In IOP Conference Series: Materials Science and Engineering, vol. 210, no. 1, p. 012061. IOP
Publishing, 2017. Proceeding
56. ITO, Teruaki, Yoshihiro UTO, Toshihiro MORIGA, Muhammad Zaimi Zainal ABIDIN, Effendi MOHAMAD, and
Mohd Rizal SALLEH. "Concurrent Engineering-based Team Working for Japan-Malaysia Academic
Collaboration." (2017). International Conference on Design and Concurrent Engineering 2017 & Manufacturing
Systems Conference 2017, Vol.12, No.205.
57. Yahaya, S. H., M. S. Salleh, E. Mohammad, M. R. Salleh, M. A. Sulaiman, and M. A. A. Rahman. "C-Shaped
Transition Curve in Air Filter Design." (2017). International Conference on Design and Concurrent Engineering
2017 & Manufacturing Systems Conference 2017, Vol.12, No.205.
58. SALLEH, Mohd Shukor, Mohamad Ridzuan MOHAMAD KAMAL, Saifudin Hafiz YAHAYA, Mohd Amri
SULAIMAN, Mohamad Ridzuan JAMLI, and Effendi MOHAMAD. "The effect of semisolid forming on the
microstructure and mechanical properties of Al-Si-Cu containing 1.0 wt% and 1.5 wt% Mg." (2017).
International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference
2017, Vol.12, No.205.
59. Sulaiman, M. A., M. S. Asiyah, R. Shahmi, R. Zuraimi, E. Mohamad, M. S. Salleh, S. H. Yahaya, and M. R.
Salleh. "Cryogenic as Alternative Cooling Method during Turning Titanium Alloy: A Review." (2017).
International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference
2017, Vol.12, No.205.
60. Effendi Mohamad, Shariful Redzuan Nawuiddin, Nor Akramin Mohamad, Mohd Amri Sulaiman, Mohd Rizal
Salleh, Dani Yuniawan and Teruaki Ito, 2018, Development of a Simulation Based Kanban System for Lean
Practitioners, The Japan Society of Mechanical Engineers : The 28th Design Engineering System Division
Lecture 2018, Yomitan village, Okinawa Prefecture, No.18-11 , pp. 2202_1 - 2202_10, 4-6 November 2018.
http://www.scientific.net/AMM.761.293http://www.scientific.net/AMM.761.293http://www.scientific.net/AMM.761.8http://www.scientific.net/AMM.761.8http://www.sciencedirect.com/science/journal/10036326http://www.sciencedirect.com/science/journal/10036326https://www.researchgate.net/profile/Effendi_Mohamad/publication/328730526_Development_of_a_Simulation_Based_Kanban_System_for_Lean_Practitioners/links/5bdeb06d92851c6b27a59aab/Development-of-a-Simulation-Based-Kanban-System-for-Lean-Practitioners.pdfhttps://www.researchgate.net/profile/Effendi_Mohamad/publication/328730526_Development_of_a_Simulation_Based_Kanban_System_for_Lean_Practitioners/links/5bdeb06d92851c6b27a59aab/Development-of-a-Simulation-Based-Kanban-System-for-Lean-Practitioners.pdf
-
18
61. Effendi Mohamad, Nor Wahida, Lubnah Hussein, Nor Akramin Mohamad, Muhamad Arfauz A Rahman,
Mohd Amri Sulaiman, Suhaimi Mohd Isa and Rusdi Abdul Rahman, 2018, Waste Reduction in Healthcare
Service by Value Stream Mapping Implementation, The Japan Society of Mechanical Engineers : The 28th
Design Engineering System Division Lecture 2018, Yomitan village, Okinawa Prefecture, No.18-11 , pp.
2207_1 - 2207_9, 4-6 November 2018.
62. Effendi Mohamad, Lukman Sukarma, Nor Akramin Mohamad, Mohd Rizal Salleh, Muhamad Arfauz A
Rahman, Azrul Azwan Abdul Rahman and Mohd Amri Sulaiman,2018, Review on Implementation of Industry
4.0 Globally and Preparing Malaysia for Fourth Industrial Revolution, The Japan Society of Mechanical
Engineers : The 28th Design Engineering System Division Lecture 2018, Yomitan village, Okinawa Prefecture,
No.18-11 , pp. 2203_1 - 2203_10, 4-6 November 2018.
63. Oesman Raliby and Effendi Mohamad, Building Small-Medium Industry Institution Towards Sustainable
Dynamic Small Industry, 22nd Conference of the Asian Forum on Business Education, Co-hosted by
Sampoerna University, Jakarta, 6 -7 December 2018.
64. Effendi Mohamad, Mohd Soufhwee Abd Rahman, Teruaki Ito and Azrul Azwan Abd Rahman, (2019),
‘Framework of Andon Support System in Lean Cyber-Physical System Production Environment, ’ The Japan
Society of Mechanical Engineer (JSME), No.19-3 Conference 2019, Manufacturing Systems Division, 12
March 2019, Aoyama Gakuin University, Kanagawa,Tokyo, p.63-64.
65. Erliana, K., Kautsar, F.U.A.D., Oktaviani, D.I.G.I.T.H.A., Yuniawan, D., Hariyanto, S., Andriono, D.,
Mohamad, E.F.F.E.N.D.I. and Firdiansyah, R., 2019, November. Solving Office Ergonomics
Problem Using Rapid Upper Limb Assessment (RULA). In 2019 1st International Conference on
Engineering and Management in Industrial System (ICOEMIS 2019). Atlantis Press.
Journal
1. Effendi, M., Razali, M.M., Rohana, A. and Adi, S., 2008. A study on the development of Key Performance
Indicators (KPIs) at an aerospace manufacturing company. J. Adv. Manufact. Tech, 2, pp.1-17. Google
Scholar
2. Mohamad, E., Abdullah, R. and Mahmood, W.H.W., 2008. Communication Gap Analysis and Aerospace
Manufacturing Company. Journal of Human Capital Development (JHCD), 1(1), pp.21-27. Google Scholar
3. Mohamad, E., Nor, H. and Salleh, M.R., 2010. The Implementation of Risk Management at Aerospace
Manufacturing Company. Journal of Human Capital Development (JHCD), 2(1), pp.25-36. Google Scholar
4. Mohamad, E., Ito, T., Salleh, M.R. and Nordin, N.A., 2012. Simulation study towards productivity improvement
for assembly line. Journal of Human Capital Development (JHCD), 5(2), pp.59-70. Google Scholar
5. Mohamad, E.B. and Ito, T., 2013. Integration of e-learning and simulation to user training programme of
SMED. International Journal of Internet Manufacturing and Services, 3(2), pp.121-136. Scopus
6. Mohamad, E., Ito, T. and Yuniawan, D., 2013. Quantifying benefits of lean manufacturing tools implementation
with simulation in coolant hose factory. Journal of Human Capital Development (JHCD), 6(2), pp.13-26.
Google Scholar
7. Yuniawan, D., Ito, T. and Bin, M.E., 2013. Calculation of overall equipment effectiveness weight by Taguchi
method with simulation. Concurrent Engineering, 21(4), pp.296-306. Scopus
8. Yuniawan, D., Ito, T. and Mohamad, E., 2013. Characteristic Mapping Of Overall Equipment Effectiveness
Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development
(JHCD), 6(2), pp.1-12. Google Scholar
9. Amran, M., Salmah, S., Sanusi, M., Yuhazri, M., Mohamad, N., Asyadi’Azam, M., Abdullah, Z. and Mohamad,
E., 2014. Surface roughness optimization in drilling process using response surface method (RSM). Jurnal
Teknologi, 66(3). Scopus
https://www.researchgate.net/profile/Effendi_Mohamad/publication/328730614_Waste_Reduction_in_Healthcare_Service_by_Value_Stream_Mapping_Implementation/links/5bdeb43e4585150b2b9d4d24/Waste-Reduction-in-Healthcare-Service-by-Value-Stream-Mapping-Implementation.pdfhttps://www.researchgate.net/profile/Effendi_Mohamad/publication/328730614_Waste_Reduction_in_Healthcare_Service_by_Value_Stream_Mapping_Implementation/links/5bdeb43e4585150b2b9d4d24/Waste-Reduction-in-Healthcare-Service-by-Value-Stream-Mapping-Implementation.pdfhttps://www.researchgate.net/profile/Effendi_Mohamad/publication/328730308_Review_on_Implementation_of_Industry_40_Globally_and_Preparing_Malaysia_for_Fourth_Industrial_Revolution/links/5bdeb2dc4585150b2b9d4a60/Review-on-Implementation-of-Industry-40-Globally-and-Preparing-Malaysia-for-Fourth-Industrial-Revolution.pdfhttps://www.researchgate.net/profile/Effendi_Mohamad/publication/328730308_Review_on_Implementation_of_Industry_40_Globally_and_Preparing_Malaysia_for_Fourth_Industrial_Revolution/links/5bdeb2dc4585150b2b9d4a60/Review-on-Implementation-of-Industry-40-Globally-and-Preparing-Malaysia-for-Fourth-Industrial-Revolution.pdf
-
19
10. Ito, T., Mohamad, E. and Salleh, M.R., 2014. A Framework of UT-UTeM Mobility Program Based Ondigital
Engineering and Deterministic Design. Journal of Advanced Manufacturing Technology (JAMT), 8(1). Google
Scholar
11. Dani Yuniawan, Teruaki Ito and Effendi Mohamad (2014) , Overall Equipment Effectiveness Estimation for
Priority Improvement in the Production Line , International Journal of Internet Manufacturing and Services,
Vol.3, No.4, pp.279-299. Scopus
12. Mohamad Amran Ibrahim, Effendi Mohamad, Muhammad Hazwan Arzmi, Muhamad Arfauz A. Rahman, Adi
Saptari, Abdul Samad Shibhgatullah, Mohd Amri Sulaiman, Mohd Amran Md Ali, 2015, Enhancing Efficiency
of Die Exchange Process Through Single Minute Exchanging Die at a Textile Manufacturing Company in
Malaysia , Journal of Applied Sciences, Vol 15, Issue 1, pp 456-464, DOI: 10.3923/jas.2015.456.464 Scopus
13. Effendi Mohamad, Teruaki Ito, Dani Yuniawan, Mohamad Amran Ibrahim , Adi Saptari, Mohd Shahir Kasim
, Raja Izamshah Raja Abdullah, Abdul Samad Shibghatullah, Mohd Amran Md Ali , 2015 , A Proposal Of Muda
Indicator Agent To Estimate Lean Manufacturing Verification, Journal of Advanced Manufacturing Technology
(JAMT) , Vol.8, No.2, pp 71-82. Google Scholar
14. Adi Saptari, PS Sabuk, Isa Halim, Effendi Mohamad, MR Salleh, (2015), The Effect Of Assembly Design
Parameters On Assembly Time, Journal of Advanced Manufacturing Technology (JAMT), Vol.9, No.1, pp 78-
90. Google Scholar
15. Zuraimi, R., Sulaiman, M.A., Sahaya Anand, T.J., Mohamad, E. and Haron, C.H.C., 2015. Tool life
performance of coated carbide tool on titanium alloy extra low interstitials. Jurnal Teknologi, 77(1), pp.85-93.
Scopus
16. Edynoor Osman, Mohd Warikh Abd Rashid, Mohd Edeerozey Abd Manaf, Effendi Mohamad, Mohd Rizal
Salleh, Teruaki Ito, Toshihiro Moriga, 2016, Hygrothermal Effect On Mechanical And Thermal Properties Of
Filament Wound Hybrid Composite, Journal of Advanced Manufacturing Technology (JAMT) , Special Issue
(TMAC) Symposium 2016, pp 1-11. Google Scholar
17. Baharuddin, Nurul Qasturi, Lukman Sukarma, and Effendi Mohamad. "Minimizing Number Of Defects In
Nickel Plating Process Using Factorial Design." Journal of Advanced Manufacturing Technology (JAMT) 10.1
(2016): 95-106. Google Scholar
18. Haron, C. C., Sulaiman, M. A., Ghani, J. A., Kasim, M. S., & Mohamad, E. (2016). Performance Of Carbide
Tool In High Speed Turning Of Ti-6al-4v Eli Under Conventional Coolant And Minimal Quantity Lubrication.
ARPN Journal of Engineering and Applied Sciences, Vol 11, Issue 7, pp 4817-4821. Scopus
19. Mohamad, E., Ibrahim, M.A., Shibghatullah, A.S., Rahman, M.A.A., Sulaiman, M.A., Rahman, A.A.A.,
Abdullah, S. and Salleh, M.R., 2016. A Simulation-Based Approach for Lean Manufacturing Tools
Implementation: A Review, ARPN Journal of Engineering and Applied Sciences, Vol 11, Issue 5, pp 3400-
3406. Google Scholar
20. Nor Asmaa Alyaa Norazlan, Adi Saptari, Effendi Mohamad, Lukman Sukarma, Mohd Rizal Salleh, Saifudin
Hafiz Yahaya,(2016). "Simulation Study in reorganizing dispatching layout to minimize dispatching
time." Journal of Advanced Manufacturing Technology (JAMT) , Vol.10. Issue 2. Google Scholar
21. Muhamad Arfauz A Rahman, Nor Suriyanti Osman, Chew Heng Boon, Gordon Ling Teck Poh, Azrul Azwan
Abdul Rahman, Bashir Mohamad Bali Mohamad, Silah Hayati Kamsani, Effendi Mohamad, Zainul Azereen
Zaini, Mohd Fairuz Ab Rahman, (2016). "Configuring safe industrial robot work cell in manufacturing
industry." Journal of Advanced Manufacturing Technology (JAMT) , Vol.10. Issue 2. Google Scholar
22. Effendi Mohamad, Mohd Amran Ibrahim, Lukman Sukarma, ABDUL SAMAD SHIBGHATULLAH, Muhamad
Arfauz A Rahman, Mohd Rizal Salleh ,2017, Improved decision making in lean manufacturing using
simulation-based approach, International Journal of Agile Systems and Management, Vol 10, Issue 1, pp 34-
48. Scopus Q1
23. Razak, M. S., M. A. Sulaiman, S. A. Mat, Z. Ramle, E. Mohamad, and M. R. Salleh. "The Effect of Cryogenic
Cooling on Surface Roughness of Titanium Alloy: A Review." Journal of Advanced Manufacturing Technology
(JAMT) 11, no. 2 (2017). Google Scholar
http://journal.utem.edu.my/index.php/jamt/article/view/116http://journal.utem.edu.my/index.php/jamt/article/view/116http://journal.utem.edu.my/index.php/jamt/article/view/292http://journal.utem.edu.my/index.php/jamt/article/view/292
-
20
24. Ishak, N. N. M., M. S. Salleh, S. H. Yahaya, E. Mohamad, and M. A. Sulaiman. "The Effect of Equal Channel
Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy." Journal of Advanced
Manufacturing Technology (JAMT) 11, no. 2 (2017). Google Scholar
25. Osman, N. S., M. A. A. Rahman, AA Abdul Rahman, S. H. Kamsani, BM Bali Mohamad, E. Mohamad, and Z.
A. Zaini. "Development of An Automated Configuration System for Robot Work Cell." Journal of Advanced
Manufacturing Technology (JAMT) 11, no. 1 (1) (2017): 113-128. Google Scholar
26. Zuraimi, R., M. A. Sulaiman, E. Mohamad, and J. A. Ghani. "Tensile Strength Analysis of High Density
Polyethylene for Injection Moulded Parts." Journal of Advanced Manufacturing Technology (JAMT) 11, no. 1
(1) (2017): 151-164. Google Scholar
27. Azlan, N. A. A. N., A. Saptari, and E. Mohamad. "Augmentation of Simplex Algorithm for Linear Programming
Problem to Enhance Computational Performance." Journal of Advanced Manufacturing Technology
(JAMT) 11, no. 1 (1) (2017): 31-46. Scopus
28. Ishak, A., E. Mohamad, L. Sukarma, AB R. Mahmood, MA A. Rahman, S. H. Yahya, M. S. Salleh, and M. A.
Sulaiman. "Cleaner Production Implementation using Extended Value Stream Mapping for Enhancing the
Sustainability of Lean Manufacturing." Journal of Advanced Manufacturing Technology (JAMT) 11, no. 1 (1)
(2017): 47-60. Scopus
29. Edynoor, O., A. R. M. Warikh, T. Moriga, K. Murai, E. Mohamad, and M. R. Salleh. "Effect of Annealing Time
on Resistivity of Kenaf Fiber Modified Indium Zinc Oxide Prepared Via Dip Coating Process." Journal of
Advanced Manufacturing Technology (JAMT) 11, no. 1 (1) (2017): 139-150. Scopus
30. Salleh, Mohd Shukor, Mohd Azizul Hikmi Safian, Mohamad Ridzuan Mohamad Kamal, Zolkarnain Marjom,
Saifudin Hafiz Yahaya, Effendi Mohamad, and Mohamad Ridzuan Jamli. "Effect Of Thixoforming On The
Microstructure And Mechanical Properties of AL-6% SI-3% CU ALLOY." JURNAL TEKNOLOGI 79, no. 5-2
(2017): 21-25. Scopus
31. Rahman, AA Abdul, E. Mohamad, S. Abdullah, M. A. A. Rahman, M. S. Osman, N. R. Mohamad, and N. Z.
Noridan. "A Concept of Physical Reconfigurable Conveyor System." Journal of Advanced Manufacturing
Technology (JAMT) 11, no. 1 (2017): 29-36. Scopus
32. Osman, Nor Suriyanti, Muhamad Arfauz A. Rahman, Azrul Azwan Abdul Rahman, Silah Hayati Kamsani,
Effendi Mohamad, Bashir Mohamad Bali Mohamad, Zainul Azereen Zaini, and Mohd Fairuz Ab Rahman.
"Configuring robot work cell in manufacturing industry." International Journal of Agile Systems and
Management 10, no. 3-4 (2017): 295-320. Scopus Q1
33. Asiyah, M.S., Sulaiman, M.A., Shahmi, R., Zuraimi, R., Mohamad, E., Haron, C.C. and Ghani, J.A., 2018.
Performance Of CVD Coated Carbide Tool by Optimizing Machining Parameters During Turning Titanium
Alloy TI-6AL-4V ELI In Flooded Condition. Journal of Advanced Manufacturing Technology (JAMT), 12(1 (2)),
pp.401-412. Scopus
34. Ishak, A., Mohamad, E., Sukarma, L., Salleh, M.S., Salleh, M.R., Mohamad, N.A., Abdullah, R.I.R. and Ali,
M.A.M., 2018. Cleaner Production Implementation in an E-Waste Recovery Plant by Using the Value Stream
Mapping. Journal of Advanced Manufacturing Technology (JAMT), 12(1 (2)), pp.55-68. Scopus
35. Rahman, M.A., Mohamad, N.R., Mustafa, Z., Ismail, S., Rahman, A.A., Abdullah, S., Mohamad, E., Nordin,
M.H. and Salleh, M.R., 2018. Design of Compact Pre-Pregger Machine for In House Production of Pre-Preg
Material. Journal of Advanced Manufacturing Technology (JAMT), 12(1 (2)), pp.437-450. Scopus
36. Ali, M.M., Abdullah, A., Mohamad, E., Salleh, M.S., Hussein, N.I.S., Muhammad, Z. and Dahaman, S., 2018.
Tensile Properties of Ternary Blends for HDPE/PP/Recycle HDPE in Blow Moulding Process. Journal of
Advanced Manufacturing Technology (JAMT), 12(1 (2)), pp.31-42. Scopus
37. Sam, M.L., Saptari, A., Salleh, M.R.B. and Mohamad, E., 2018. Comparison between linear programming and
integer linear programming: a review. International Journal of Mathematics in Operational Research, 13(1),
pp.91-106. Scopus Q3
38. Mohamad, E., Ishak, A., Salleh, M.S., Salleh, A.Rahman,M.A., Ito, Teruaki., and Sulaiman,M.A, 2019, Cleaner
production value stream mapping at a chromium plating plant: a case study, International Journal Agile
Systems and Management, Vol.12, No.3, pp.245-260. Scopus Q1
-
21
39. Mohamad, E., Ibrahim, M.A., Rahman, M.A., A.Rahman, Salleh, M.R. and Sulaiman M.A., 2019. Generation
of a Decision Support System to Enhance the Efficiency of Lean Manufacturing, Industrial Engineering &
Management Systems, Vol 18, No.2, pp 173-181. Scopus Q2
40. Rahmat, R., Mohamad, E., Jaafar, R., Saptari, A., Mohamad, N.A., Yuniawan, D. and Ito, T., 2019. Improving
Electronic Document Control Approval Process Through E-Certification. Journal of Advanced Manufacturing
Technology (JAMT), Vol.13, No.1, pp.33-44. Scopus Q3
41. E Mohamad, I Anak Jiga, R Rahmat, A Azlan, MS Abd Rahman, A Saptari, 2019, Online Booking Systems
for Managing Queues at The Road Transport Department , JIE Scientific Journal on Research and
Application of Industrial System , Vol.4, No.1, pp.21-32. Google Scholar
42. Aziz, M.S.A., Mizobuchi, A., Izamshah, R., Kasim, M.S., Mohamad, E., Salleh, M.R. and Ishida, T.,
2019. Helical Micro-Hole Drilling of Chemically Strengthened Glass Using Capsule-Shaped
Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology (JAMT), 13(2).
Scopus Q3
43. Rahman, M.A., Mohamad, E. and Rahman, A.A., 2020. Enhancement of overall equipment
effectiveness (OEE) data by using simulation as decision making tools for line
balancing. Indonesian Journal of Electrical Engineering and Computer Science, 18(2), pp.1040-
1047. Scopus Q4
44. Azlan, N.A.A.N., Mohamad, E., Salleh, M.R., Novareza, O., Yuniawan, D., Rahman, M.A.A.,
Saptari, A. and Sulaiman, M.A., 2020, Multiplicity of Approach and Method in Augmentation of
Simplex Method: A Review, Mathematics and Statistics, 8(1), pp.53-60. Scopus Q4
http://e-journal.president.ac.id/presunivojs/index.php/journalofIndustrialEngineerin/article/view/745http://e-journal.president.ac.id/presunivojs/index.php/journalofIndustrialEngineerin/article/view/745