course description / customised course adtec melaka · pdf file1/15 basic electro-pneumatics...

COURSE DESCRIPTION / CUSTOMISED COURSE ADTEC MELAKA

2017

Bil Tarikh Tajuk Yuran /RM Note

Page

1 MAC 4,5,11

JULY 1,2,8

AC Motor Control 280.00 / 24 jam 1

2 MARCH 18,19

OCT 15,16

Basic Electro-Pneumatic 230.00 / 16 jam 2

3 APRIL 8,9

SEPT 9,10

Basic Hydraulics 300.00 / 16 jam 3

4 MAY 11,12,18

AUG19,20,26

Basic Pneumatics 200.00 / 16 jam 4

5 JUNE 10,11,17

NOV 18,19,25

Computer System Servicing 300.00 / 21 jam 5

6 JULY 8,9,15

MAY 6,7,13

Fibre Optic Transmission System 500.00 / 24 jam 6

7 MARCH 11,12,18

JULY8,9,15

Fundamental Of Electronics 500.00 / 40 jam 6

8 MARCH 4,5,11,12,18

OCT 7,8,14,15,21

Fundamental Of Metrology 450.00 / 32 jam 7

9 APRIL 1,2,8,9

SEPT 9,10,23,24

Fundamental Of Milling Machine Operation

800.00 / 32 jam 7

1

0

JUNE 10,11,17,18

NOV 4,5,11,12

Grinding 800.00 / 32 jam 8

1

1

JULY 1,2,8

MAY 6,7,13

Introduction To Communication System 500.00 / 24 jam 8

1

2

MARCH 11,12,18

JULY 1,2,8

Introduction To Pro/Engineer 300.00 / 32 jam 9

1

3

MARCH 11,12

OCT 7,8

Introduction To Programmable Logic

Controller

220.00 / 16 jam 9

1

4

APRIL 1,2,8

SEPT 9,10,17

Microwave System 500.00 / 32 jam 10

1

5

JUNE 3,10,11

NOV 4,5,11

Pneumatic System 300.00 / 32 jam 10

1

6

APRIL 1,2,8

SEPT 9,10,17

Electropneumatic System 300.00 / 32 jam 11

1

7

JUNE 10,11,17

MAY 6,7,13

Three Phase Motor Control 300.00 / 32 jam 12

1

8

MARCH 18,19,25

OCT 7,8,14

Electro-Pneumatic 300.00 / 32 jam 13

AC MOTOR CONTROL

Objective

The objective of this course is to introduce the principles of AC motor control, how to choose the right starter for motor, function of motor control circuit and assembly of motor control circuit.

Training Content

1. Introduction to alternating current (AC) • Generator of AC. • Wave sinus.

2. Types of AC motor • 1-phase motor • 3-phase motor

3. 1-phase Motor Control • Interpret component and starter motor. • Direct line starter.

4. 3-phase Motor Control. • Direct line starter • Star-delta starter.

Target Group

This course is suitable for technical personnel who require fundamental training in AC motor control such as assistant technicians or technicians whose job functions at the industry involved some forms of usage of AC motor.

Duration and Fees

24 hours, RM 280 per participant

1

9

APRIL 1,2,8

JUNE 4,10,11

Fundamental Of Advanced Hydraulic 300.00 / 32 jam 14

2

0

Borang Permohonan 15

1/15

BASIC ELECTRO-PNEUMATICS

Objective

This course introduces the participants to the fundamentals of electro-pneumatic and its application in automation system.

Training Content

1. Introduction to electricity. • Electricity principles. • Ohm’s Law. • Introduction to electrical control.

2. Type of electro-pneumatic components • Principles and application of switch, relay, and sensor. • Basic installation of components.

3. Types of directional control valve. • Introduction to solenoid valve. • Principle and application of directional control valve.

4. Read and install Electrical Circuit Diagram • Introduction electrical circuit diagram. • Read and Analysis Electrical Circuit Diagram. • Install Electro-pneumatic System.

Target Group

This course is suitable for operators or assistant technicians who are interested in learning about electro-pneumatic.

Duration and Fees

16 hours, RM230 per participant

BASIC HYDRAULICS

Objective

This course introduces the principles of hydraulic system, basic hydraulic components, and method of constructing a hydraulic circuit for industrial application.

Training Content

1. Pressure Fundamentals. • Law and principles of pressure. • Pressure unit. • Pressure measuring instrument.

2. Introduction to hydraulic structure and components. • Hydraulic pump, reservoir, oil, hose. • Hydraulic control valve and actuator.

3. Interpret hydraulic circuit diagram. • Determine and read circuit. • Design the circuit.

4. Install hydraulic circuit. • Identify component. • Assemble and disassemble components. • Test and repair.

Target Group

This course is suitable for technical personnel who require an introductory course in hydraulic system.

Duration and Fees


3/15 BASIC PNEUMATICS

Objective

The objective of this course is to introduce the participants to pneumatic system and train them to do pneumatic system connection and installation.

Training Content

1. Introduction to pneumatic system: • Characteristic and application. • Component of a pneumatic system. • Symbols and standard.

2. Type of components and application: • Air generation and distribution. • Actuator and output device. • Directional control valves.

3. Non-return, flow and pressure valves, valves combination.

4. Methods for developments of pneumatic system. • Development of single actuator circuits. • Development of multiple actuator circuit. • Trouble-shooting of pneumatic system.

5. Read and install pneumatic circuit diagram. • Read and analyse pneumatic circuit diagram. • Install pneumatic system.

Target Group

This course is suitable for operators or assistant technicians who are interested in learning about pneumatic system.

Duration and Fees 16 hours, RM 200 per participant.

4/15

COMPUTER SYSTEM SERVICING

Objective

This course gives a comprehensive coverage on how to solve the commonly found problems in computer. These include from the hardware problems (such as the motherboard and disk drivers) to the software problems (such as the operating system).

Training Content

1. Hardware • Motherboard • Floppy disk drivers • Hard disk drivers • Keyboard. • Mouse.

2. Software • The boot process. • Directories. • Working with password. • Setup • Operating systems

Target Group

This course is suitable for individuals who would like to know how to fix common problems that occur on their computers.

Duration and Fees


5/15

FIBER OPTIC TRANSMISSION SYSTEM

Objective

The objective of this course is to introduce the participants to the fundamentals of communication using optical fibre. Training Content

1. Fibre optic as a transmission medium 2. Basic elements in communication using transmission medium 3. Components used in data transmission 4. Method of fibre optic jointing.

Target Group

This course is suitable for technical personnel who are involved in planning and implementing fibre optic installation works such as installation operators and fibre optic maintenance technician. It is also suitable for individuals who require a course in communication system using fibre optic.

Duration and Fee

24 hours, RM 500 per participant.

FUNDAMENTAL OF ELECTRONICS

Objective

The objective of this course is to introduce the fundamental of electronics. Emphasis is given on diodes, transistors and their application in logic digital.

Training Content

1. Atomic structure, electron valence and P-N join in semiconductor. 2. Characteristics of diodes, comparison between silicon diode and germanium diode. 3. Definition, construction and symbol for transistors; type of transistors. 4. Functions of transistor in circuit. 5. Definition, construction, symbol and functions in the components of logic digital.

Target Group

This course is suitable for technical personnel working in electronics-related field and also for those without formal educational background in electronics but interested to get an introductory course in electronics.

Duration and Fee


6/15

FUNDAMENTAL OF METROLOGY

Objectives

This course introduces various types of measuring equipment and the proper technique of using them.

Training Content

1. Introduction and application of vernier calliper, vernier height gauge 2. Work piece inspection and measurement. 3. Measurement of roundness. 4. Measurement of roughness.

Target Group

This course is suitable for technical workers who are interested to develop their measurement skills.

Duration


FUNDAMENTAL OF MILLING MACHINE OPERATION (Conventional / CNC Milling)

Objective

The objective of this course is to train the participant on proper techniques of milling machine operation.

Training Content

1. Introduction to milling machine, type of milling machine and main components. 2. Introduction to milling tools, milling accessories, types of arbor. 3. Milling techniques.

Target Group

Technical personnel who require fundamental training in milling machine operation.

Duration and Fees

32 hours, RM 800

7/15

GRINDING

Objective

This course is designed to impart knowledge and skills in basic grinding including inspection and balancing of grinding wheel, grinding on horizontal surface, grinding on vertical surface, and cylindrical grinding.

Training Content

1. Wheel inspection, balancing, mounting, turning, and dressing. 2. Types of grinding machine 3. Shape of grinding wheel, selection of grinding wheel. 4. Surface grinding machine and cylindrical grinding machine.

Target Group

This course is suitable for Individuals who are interested in knowing and applying the proper technique in grinding especially for those who are involved in metal grinding works

Duration


INTRODUCTION TO COMMUNICATION SYSTEM

Objective

This course introduces the participant to the principles of communication, analysis of AM/FM and PM, and also introduction to telephony.

Training Content

1. Principles of amplitude modulation 2. Amplitude modulators, demodulators, balanced Modulators, SSB circuit, mixers and converters. 3. Bandwidth and index 4. Differences between frequency modulation and amplitude modulation.

Target Group

Industry personnel with some background in electronics or telecommunication.

Duration and Fee


8/15

INTRODUCTION TO PRO-ENGINEER

Objective

This course is designed to impart fundamental knowledge and skills in drawing industrial product in three dimensional (3D) solid models using the Pro-Engineer software.

Training Content

1. Introduction to Pro-Engineer, interface, pick and place feature, mode sketcher and feature sketch.

2. Datum planes, parent/child relationship, simple sweep and blends. 3. Pattern and copy, drawing creation and views. 4. Drawing project.

Target Group

The target group are technical personnel from the industry who are involved in technical drawing and design. This course is also suitable for individuals who already have some experience in AutoCAD and are interested in learning 3D CAD using Pro-Engineer.

Duration and Fee


INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLER (PLC)

Objective

This course covers the fundamentals of programmable logic controller (PLC). Participants are trained to write basic program and apply it to an automation system.

Content

1. Introduction to Control System 2. The Role of Programmable Controllers:

• Input / output devices. • Structure of a programmable controller • Programmable control panel.

3. Programming using CPM1A OMRON 4. Circuit of PLC.

Target Group

This course is suitable for operators or assistant technicians who are interested in learning about programmable controllers.

Duration and Fees


9/15 MICROWAVE SYSTEM

Objective

The objective of this course is to introduce the participants to microwave system.

Training Content

1. Introduction to wave guide and calculation of peak frequency 2. Calculation of voltage standing wave ratio (VSWR) 3. Microwave power 4. Diode detector law. 5. Impedance and matching impedance

Target Group

This course is suitable for technical personnel working in electronics or telecommunication related field.

Duration and Fee


PNEUMATIC SYSTEM

Objective

This course explain the participant to the Pneumatic Sytem and industrial application and train them to do installation pneumatic system connection and create pneumatic circuit diagram.

Training content 1. Knowlege about Pnecmatic System and application:

• Symbols and standard. • Component of a pneumatic system.

2. Type of component and application. • Actuator and output device. • Directional control valve. • Non-return valve, flow and pressure valve, and valve combination.

3. Method for development of pneumatic system. • Development of single actuator circuit. • Development of multiple actuator circuit. • Trouble-shooting of pneumatic system.

4. Read and install pneumatic circuit diagram. • Read and analysts pneumatic circuit diagram. • Install pneumatic system

5. Design and create pneumatic circuit diagram (advanced level) • Design pneumatic circuit using cascading method. • Design pneumatic circuit using stepper module (shift register)

Target Group

This course is suitable for operators or assistant technicians who are interest in learning about pneumatic system. Duration and Fee 32 hours, RM 300 per participant

10/15

ELECTROPNEUMATIC SYSTEM

Objective

This course explain the participant to the Electro Pneumatic Sytem and industrial application, train them to do installation electrical wiring, and create and design electrical cicuit for Electro pneumatic.

Training content

1. Knowlege about electrical standard circuit: • Symbols and standard. • Component of a electro-pneumatic

2. Type of component and application. • Explain about solenoid valve and application. • Principle and application of directional control valve.

3. Electrical component and application on electro pneumatic. • Application switch and type of switch. • Application switch and type of relay. • Inductive sensor, capacitive sensor, and optical sensor.

4. Read and install pneumatic circuit diagram. • Read and analysts electro pneumatic circuit diagram. • Install electro pneumatic system in panel board

5. Design and create electrical circuit diagram for electro pneumatic (advanced level)

• Design electrical circuit using shift register method. • Modification and trouble shoot electrical circuit.

Target Group

This course is suitable for operators or assistant technicians who are interest in learning about pneumatic system.

Duration and Fee


11/15

THREE PHASE MOTOR CONTROL

Objective

The objective of this course is to introduce the principles of AC motor controls how to choose the right starter for motor, function of motor control circuit and assembly of motor control circuit.

Training Content

1. Introduction to alternating current (AC) • Generator of (AC) • Wave sinus

2. Type Of AC motor • 3 – phase motor

3. 1 – phase Motor control • Interpret component and starter motor. • Direct line starter.

4. 3-pahse Motor Control • Direct line starter • Star-delta starter

Target Group

This course is suitable for technical personnel who require fundamental training in AC motor control such as assistant technicians or technicians whose job functions at the industry involved some forms of usage of AC motor.

Duration and Fee


12/15

ELECTRO-PNEUMATIC

Objective

This course introduces the participants to the fundamentals of electro-pneumatic and its application in automations system.

Training Content

1. Introduction to electricity. • Introduction to electrical control

2. Type of electro-pneumatic components • Principles and application of switch, relay and sensor • Basic installation of components.

3. Types of directional control valve. • Introduction to solenoid valve. • Principle and application of directional control valve.

4. Read and install Electrical Circuit Diagram. • Introduction electrical circuit diagram • Read and Analysis Electrical Circuit Diagram. • Install Electro-Pneumatic System

Target Group

This course is suitable for operation or assistant technicians who are interested in learning about electro-pneumatic.

Duration and Fee


13/15

FUNDAMENTAL OF ADVANCED HYDRAULIC SYSTEM

(SBL 019)

Objective

The course explain the principles of pressure measuring instrument, hydraulic system, electro hydraulic system, hydraulic and electro hydraulic components and method of constructing a advanced hydraulic circuit for industrial application.

Training content

1 Principles of pressure • Pressure unit. • Pressure measuring instrument.

2. Introduction to advanced hydraulic structure and components • Hydraulic pump, reservoir, oil, hose etc. • Hydraulic control valve and actuator. • Electro hydraulic components and panel.

3. Interpret advanced hydraulic and electro hydraulic circuit diagram • Determine and read circuit • Design the circuit.

4. Install advanced hydraulic and electro hydraulic circuit. • Identify component. • Assemble and disassemble component. • Test and repair • Upgrade circuit.

Target Group

This course is suitable for technical personnel who require learning more about hydraulic system.

Duration and Fee


14/15

BORANG PERMOHONAN KURSUS / MODULAR ( CUSTOMISED COURSE )

Pengarah Pusat Latihan Teknologi Tinggi ( ADTEC ) Bandar Vendor Taboh Naning 78000 Alor Gajah Melaka. u.p : Kamal Jaini. Tel : 06 5527148 Fax : 06 5527231

Tuan,

PROGRAM KURSUS JANGKA PENDEK / MODULAR (CUSTOMISED COURSE )

Kursus yang ingin disertai :

Nama Peserta :

Institusi :

Bil Tajuk Kursus Tarikh

Bil Nama Peserta No Kad Pengenalan Jawatan

Nama Syarikat :

Cop Organisasi / Syarikat :

15/15

Alamat Surat Menyurat :

No. Tel :

No. Fax :

Pegawai untuk dihubungi .

course description / customised course adtec melaka · pdf file1/15 basic electro-pneumatics...

Documents