ahmed saad abdullah cv 10-15
TRANSCRIPT
Personal Information.
Name : Ahmed Saad Abdullah Radwan
Addresses : Benha – Qalubia – Egypt
Telephones : +2 01063337001 , +2 0133880907
+2 01148005955
E- mail : [email protected]
Date of birth : 1/10/1985
Military service: final exempted
Qualification
Suez Canal University Faculty of petroleum& mining Engineering
B. Sc. degree in Metallurgy and Materials Engineering, May 2007
Grade : Good
Final year grade : Good
Graduation project: Steel making and its developments
supervisors : Prof. Dr.samir Abd El-hakim
Grade: Very Good
Skills:
Languages
Arabic : Mother tongue
English : Good command and speak
Computer Operating system : Windows XP
Office Tools : Word , Excel , Power point
Professional courses:
AHMED SAAD ABDULLAH BENHA QALUBIA
Phone mob:01063337001
: 01148005955
home:0133880907
CURRICULUM VITAE
AWS CWI (American Welding Society Certified Welding
Inspector) ID 14072831
Welding technology:(Qualification) Welding discontinues. Welding technology& its metallurgy. welding qualification& documentation
N.D.T according to ASNT-TC1A: Radiographic testing.(level ІІ)
Ultrasonic testing. (level ІІ)
Liquid penetration. (level ІІ)
Magnetic testing. (level ІІ)
TOTAL YEARS OF EXPERIENCE: 8 YEARS.
FIELD OF EXPERIENCE :
QA / QC / WELDING / NDT OF PIPING
ERC Refinery Project
EXPERIENCE RECORD:
FROM 15-01- 2015 till now
EMPLOYER: GS Engineering & Construction
PROJECT: Egyptian Refining Company (TAKRIR) / Mostorod, Egypt
POSITION: QC-Welding Engineer
PROJECT DESCRIPTION:
The new plant refinery at the Mostorod Petroleum Complex is being constructed in an industrial
area situated 10km to the north of Cairo, on land that was provided by the Cairo Oil Refining Co
(CORC). The plant will include a two-million-tonnes-a-year unit for the production of high-quality
diesel. The other complex units will include an 80,000bpd vacuum distillation unit (VDU), along with
a 40,000bpd hydrocracker that can transform lower-quality products into the middle distillates
which are in high demand. The crude distillation units are being constructed by ENPPI (Engineering
for the Petroleum and Process Industries).
Annual capacity at the refinery will be five million tonnes or (100,000bpd) of refined products (2.5
million tonnes of diesel oil when the complex is complete). We have Pipes of different materials such
as high temp. as SA 335 P11, P22, P91,15Mo3, Ni based alloys such as Inconel.
Project Client: GS Engineering & Construction,
Project Consultant: WorleyParsons of Australia
DUTIES & RESPONSIBILITIES:
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Follow up all N.D.T as RT & PT & MT & UT and Interpretation of all results.
Follow up PWHT process and review PWHT charts.
Applied code ASME 31.3 process piping for fabrication and acceptance criteria.
Preparation all Q.C documents and all reports for fabrication shop.
Prepare test package for loops of piping.
6th October Power Plant-600MW
Simple Cycle project
FROM 16-11- 2013 to 15-01- 2015
EMPLOYER: ORASCOM – OC
CLIENT: CAIRO ELECTRICITY PRODUCTION COMPANY (CEPC)
MAIN CONTRACTOR: ANSALDO ENERGIA
PROJECT: 6th October Power Plant-600MW Simple Cycle project
POSITION: QC-Welding Engineer
PROJECT DESCRIPTION:
The site is located in Giza governorate along Cairo-Alexandria desert road and at the intersection with Abu
Rawash road which is few hundred meters northern from the 26th of July Mehawar. The site is part of the
fenced area of the high voltage research center which is under the authority of the Ministry of Electricity.
The proposed power plant will generate 600 MW using a natural gas supply.
DUTIES & RESPONSIBILITIES:
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Prepare test package for loops of piping.
.
National Steel Fabrication ( NSF )
FROM 31-01- 2013 Till 15-11-2013
EMPLOYER: NSF
PROJECT: Al Khalij 4*350 MW power plant & Nagaf cement factory & Grand Cote
POSITION: QC-Inspector Engineer
DUTIES & RESPONSIBILITIES:
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Make traceability report if required.
Egypt Fertilizers Company (EFCI and EFCII) Revamp
FROM 3-08- 2011 to 31-1-2013
EMPLOYER: ORASCOM - OC
PROJECT: EFC I Revamp & EFC II Revamp
POSITION: QC-Welding Engineer & Equipment Engineer & Painting Engineer
PROJECT DESCRIPTION:
The EFC consist of 2 urea Plant of Egypt Fertilizers Company is located in ain sukhna Egypt. Each plant is
an original 1925 MTPD urea plant design according to the stamicarbon CO2 stripping process. The plant is
revamped to a capacity of 2250 MTPD by using the MP-add on technology of stamicarbon.
Project Client: Egypt Fertilizers Company,
Project Inspection: Uhde-Germany
DUTIES & RESPONSIBILITIES:
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Follow up equipment installation and check its elevation and orientation and verticality according
to drawings.
Follow up sand blasting and applying of each painting coats to pipe lines according to Uhde
specification.
Sorfert fertilizers plant-Algeria
EXPERIENCE RECORD:
FROM 15-06- 2009 TO 3-08-2011
EMPLOYER: ORASCOM - OCIA
PROJECT: Sorfert Fertilizers Plant - Algeria
POSITION: QC-Welding Engineer
PROJECT DESCRIPTION:
Sorfert Fertilizers Complex Plant of 2 ammonia lines, capacity of each of them is 2200 tons per day and
one line for urea synthesis and granulation with capacity of 3450 tons per day, three ammonia storage tanks
of 40 m in diameter, 3 boilers of 150 Mw and primary and secondary reformers and many reactors and
piping for processing, erection of steel structures for buildings, air intake systems and ducts, stacks, Pipes
of different materials such as low temp. as SA333 Gr.6 and high temp. as SA 335 P11, P22, P91, 15Mo3,
Ni based alloys such as Inconel, austenitic stainless steels as 304 L, 316L, 321, 347, duplex and super
duplex stainless steels and safurex.
Project Client: ORASCOM & SONETRAC, Project Inspection: Uhde-Germany
DUTIES & RESPONSIBILITIES:
FROM 01-08- 2009 TO 3/8/2012
Follow up all activities for 2 Reformers
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Follow up all N.D.T as RT & PT & MT & UT and Interpretation of all results.
Follow up PWHT process and review PWHT charts.
We have Pipes of different materials such as high temp. as SA 335 P11, P22, P91,
15Mo3, Ni based alloys such as Inconel.
FROM 15-6-2009 TO 01-08-2009: (Fabrication shop) the same project
The main task for these shop prefabrication all pipes and these pipes of different materials such as carbon
steel low temp.SA.333 grade 6 & high temp as SA.335 P11, P22, P91, 15Mo3 Follow up all activities for
fabrication-shop as advisor UHDE Company.
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Follow up all N.D.T as RT & PT & MT & UT and Interpretation of all results. and aware to ASME
5 and review their reports.
Follow up all PQR’s and WPS’s for all materials at fabrication shop according to ASME IX. and
review all PQR & WPS.
Applied code ASME 31.3 process piping for fabrication and acceptance criteria.
Preparation all Q.C documents and all reports for fabrication shop.
EL-NILE SUGR COMPANY
FROM 01-08- 2008 TO 15-6-2009
EMPLOYER: ORASCOM - OCIA
PROJECT: EL-NILE SUGR - EGYPT
POSITION: QC-QA-Welding Engineer
Client for EL-NILE COMPANY to check all equipments according to drawing as NSF Company fabricate
them.
DUTIES & RESPONSIBILITIES:
Follow up all welding activities fit up check and type of welding electrodes and do inspection
before and during and after welding according to WPS’s.
Follow up all N.D.T as PT & MT & UT and Interpretation of all results. And aware to ASME 5 and
review their reports.
Applied code AWS for fabrication and acceptance criteria.
Check dimension for all equipments according to drawing and release equipments to erection.
