curriculum vitae 1.web1.fkm.utm.my/userfiles/file/cv staf academic new... · machinability of...

NMYCV partially updated 150713 1

CURRICULUM VITAE 1. Personal Data

Name: Noordin bin Mohd. Yusof Position: Professor Citizenship: Malaysia Race: Malay Sex: Male Marital Status: Married with 4 children Office Address: Faculty of Mech. Engineering,

Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia

Telephone No.: 07-5557048 Fax No.: 07-5566159 Email: [email protected]

2. Academic Qualifications

Qualification University/Institution Year

Ph. D. (Mech. Eng.) Universiti Teknologi Malaysia, Malaysia 2003 M. Sc. (Adv. Manuf. Tech.) Cranfield Institute of Technology, UK 1990 B. Mech. Engg. (Hons.) Universiti Teknologi Malaysia, Malaysia 1986 2nd Class Upper

3. Professional Membership

Senior Member, Society of Manufacturing Engineers USA & Institution of Engineers Malaysia

4. Field of Expertise

Machining Processes, Quality Improvement Techniques, Statistical Quality Control, Experimental Design, Production Operations Management, Sustainability


5. Research Interest

Machinabilty Studies, Hard Turning, Industrial Engineering, Sustainability Studies, Membrane Manufacture

6. Work Experience

Academic Experience Period Position Organisation March 2009 to present Professor Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia April 1995 to March 2009 Assoc. Professor Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia March 1990 to April 1995 Lecturer Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia July 1987 to February 1990 Asst. Lecturer A Fac. of Mechanical Engineering,

Universiti Teknologi Malaysia Industrial Experience

Period Position Organisation

3/1987 - 6/1987 Technician Matsushita Industrial Corporation

Duties include establishing work methods and time standards for the manufacture air conditioners, conducting productivity improvement activities including giving training in basic Industrial Engineering to fellow technicians. Was also involved in Quality Control Circle activities.

8/1986 - 10/1986 Quality Engineer Harris Semiconductor Malaysia

Exposed to and given quality responsibilities for all hermetic operations. Designed process audit checklist, was a member of the task force for implementing SPC.

7. Administrative Experience at UTM

Position held Year

1. Deputy Dean (Development), Faculty of Mechanical Engineering 10/2011 – present

2. Deputy Director (Project Management), Research Management Center 6/2009 – 9/2011


3. Head of R & D Cluster (Advanced Materials and Manufacturing), Research Management Center 2006 – 2009

4. Head of the Department of Production & Industrial Engineering, Faculty of Mechanical Engineering 1993 – 1994, 1989 – 1991

5. Head of Production Engg. Panel 2004 – 2006, 1996 – 1998, 1994, 1992 – 1993

6. Head of the Faculty of Mechanical Engineering Central Store 1987 – 1988

7. Coordinator of the Faculty of Mechanical Engineering Resource Center 2004 – 2007

8. Member of the Faculty of Mechanical Engineering IDB Tender Technical Evaluation and Coordination Committee 2004

9. Member of the Faculty of Mechanical Engineering Academic Committee 2004 – 2006, 2009 – present

10. Member of the Faculty of Mechanical Engineering Administrative Committee 2004

11. Member of the Faculty of Mechanical Engineering Curriculum Committee 2004 – 2006

12. Member of the UTM’s Senate Standing Committee on Library 2005 – 2008

13. Member of the UTM’s Technical Committee 2009 – present

Additionally, has previously held various positions in numerous other committees at the department, faculty, university and national levels.

8. Teaching and Laboratory Supervision Experience

Name of subject at B. Eng. level

Advanced Quality Engineering (SMI 5843)

CAD/CAM/CNC Laboratory

Data Analysis in Industrial Engineering (SMN 2813)

Industrial Engineering (SME 3813)

Manufacturing Processes (SME 3713)

Materials Handling

Metrology and Quality Control (SMR 3713)


Production Planning and Control (SME 4853)

Project Management

Project Management and Maintenance (SMN 4842)

Quality Engineering (SMR 3712)

Simulation

Name of subject at M.Eng. level

Production Operations Management (MMP 2643) M. Eng.

Manufacturing Science (MMP 1653) M. Eng.

Quality Engineering (MMN 1313) M. Eng.

Advanced Quality Engineering (MMP 1673) M. Eng.

Additionally have supervised the conduct of numerous laboratory experiments and modules relating to production engineering, metrology and industrial engineering,

9. Post Graduate / Undergraduate Supervision Experience

Post Graduate (Ph. D)

1. Ehsan Fallahi Arezoudar

Evaluation of mechanical properties of fabricated heart valve tissue engineering in vitro condition

10/13-Present

2. Seyed Yaser Bozorgi Rad

Warehouse optimization in supply chain management (SCM) using genetic algorithms (GA)

9/13-Present

3. Alireza Khademi Development and optimization of submerged membrane ultrafiltration system using design of experiments, artificial neural networks and particle swarm optimization methodology

6/13-Present

4. Amad Elddein Issa Elshwain*

Evaluation of performance cold nitrogen and oil mist for difficult - to - cut materials

2/13-Present

5. Nor Hasrul Akhmal Ngadiman

Maghemite filled poly-vinyl alcohol nanofibers for bone tissue engineering scaffolds

5/12-Present

6. Nur Syamimi binti Jiran*

Development of life cycle costing methodology for membrane system used in wastewater treatment system from chemical process industry

4/12-Present

7. Mohammad Ehsan Torabizadeh

Performance measurement of sustainable supply chain managemnet in semi conductor factory

3/12-Present

8. Farhad Najarian Electromagnetic field assissted deep hole drilling process

2/12-Present


9. Nithia Kumar Kasava+

A conceptual sustainable domain value stream mapping framework

2/12-Present

10. Norafifah Husin* Optimization of PES ultrafiltration hollow fiber membrane fouling performances using ant colony optimization algorithm

2/12-Present

11. Noor Adila Aluwi Shakir*

Optimization of spinning condition in polyethersulfone ultrafiltration hollow fiber membrane fabrication using genetic algorithm

2/12-Present

12. Salwa Mahmood* Methodology for Assessing Sustainability of Membrane System for Wastewater Treatment

On-going

13. Mohamed Handawi Saad Elmunafi

Performance evaluation of finish hard turning using coared carbide cutting tools under minimum quantity lubrication condition

9/11-Present

14. Rusdi Nur Analysis of Energy Consumption in Turning Process

9/11-Present

15. Vahid Abbasgholi Pourghadim

Development of Schochastic Model for Optimizing Buffer Allocation in Remanufacturing System

9/10-Present

16. Hassan Abdelwahab Abdelkarim

Development and heat treatment of electroplated nickel layer on tungsten carbide substrate for diamond deposition

7/09-Present

17. Adnan Hj Bakri* + Development of a comprehensive TPM framework for automotive industry

7/09-Present

18. Rival* Performance Evaluation of New Drill Geometry in Drilling of Inconel 718

On-going

19. Mohammadreza Daroonparvar*

Applicaton of Nanostructured Bond Coat in Thermal Barrier Coating Systems with Nano Alumina as a Third Layer

2013

20. Ahmad Kamely Mohamad

The Effectiveness of Coatings when Machining Hardened Cold Work Tool Steel AISI D2 (60 HRC)

2008

21. Amrifan Saladin* Mohruni

Performance Evaluation of Coated and Uncoated Carbide when End Milling of Aerospace Material

2008

22. Thet Thet Mon* Modeling of Stagnant Zone Formation on Diamond Cutting Tool when Turning Titanium Alloy

2007

Post Graduate (M. Eng.)

1. Mohd. Zulkhaairi Tukimin

Nickel Interlayer Coating Development for Diamond Coated Tungsten Carbide

2013

2. Denni Kurniawan Performance Evaluation of Coated Carbide Cutting Tools when Turning Hardened Tool Steel

2008


3. Mohd Fauzi Mohamed* +

Comparative Study of Japanese Based Company Quality Practices versus Local Malaysian Companies

2008

4 Rival* Electrical Discharge Machining of Titanium Alloy using Copper Tungsten Electrode with SiC Powder Suspension Dielectric Fluid

2005

Post Graduate (M. Eng. (Mech.-AMT))

1. Mehdi Hourmand Fabrication of a Cu-W Micro-Electrode for Producing Micro-Hole using EDM Process

2013

2. Mohd. Zamri bin Borhan#

Machinability of Aluminium Alloy when Face Milling using Carbide Inserts

2013

3. Nammon Jiawkok Machining of Bone: An Analysis of Cutting Force, Surface Integrity and Chip Morphology

2013

4. Mohsen Marani Barzani

Effect of Silicon Morphology on Various Machinability Parameters when Turning Al-Si-Cu-Mg Alloy

2012

5. Ali Davoudinejad Performance Evaluation of Different Edge Geometry when Turning Hardened DF3 Tool Steel

2012

6. Adam Umar Alkali Wear Mechanism and Surface Integrity Studies when Turning Hardened Tool Steel using Wiper Coated Ceramic Tool

2011

7. Ayoob Ahrari Application of Design of Experiment Technique in the Nickel-Chromium Electroplating Process on WC-Co Substrate prior to HFCVD Diamond Coating

2010

8. Mehdi Mohammadzadeh Sari

Machinability of AISI H13 Tool Steel when using the EDM Process with Carbon Nanotubes

2010

9. Mohamed Handawi Saad Elmunafi

Performance Evaluation of Wiper Coated Ceramic Tool when Hard Turning Tool Steel

2010

10. Mohd. Rosmaini Shaari#

Effect of Edge Preparation when Hard Turning Tool Steel

2010

11. Ahmad Dzia’uddin Mohamed#

Effect of Process Parameters on Surface Roughness Produced by Turning Boring Operation

2010

12. Norfaizem Ibrahim# Effect of Tool Length on Plane Turning Performance

2010

13. Mohd. Rozaimi Ismail#

Effect of Cutting Parameters on the Surface Integrity of Ground AISI 1148 Steel

2010

14. Azri Azman# Performance Evaluation of Different Process 2010


Conditions when Hard Turning ASSAB 760

15. Abdulghadar A.M. Awheda

Development of a User Guide for an Ultra Precision Diamond Turning Machine and Evaluation of Mirror Profiles Turned

2007

16. Hendriko Experimental Study on the Effects of Cutting Edge Preparation when Turning Hardened Steel

2007

17. K. Muniswaran K. Seveen

Performance Evaluation of Ceramic Cutting Tools when Turning Hardened Steel

2007

18. Effendy Tool Wear and Tool Life Performance of TiAlN Coated Carbide Cutting Tools when Turning XW 42 Hardened Tool Steel

2007

19. Wan Emri Wan Abdul Rahaman

Performance Evaluation of Ceramic Cutting Tools when Turning Hardened Steel

2006

20. Tang Yu Cai Performance Evaluation of Coated Carbide Cutting Tools when Turning Hardened Tool Steel

2006

21. Affandi Mohd Zainal Performance Evaluation of Wiper and Conventional Coated Ceramic Cutting Tools when Turning Hardened Steel

2006

22. Dwi Augustina Development of a Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organisations

2006

23. Saiful Bahri Abd. Jamil

Performance Evaluation of Ceramic and PCBN Cutting Tools when Turning Hardened Steel

2004

24. Mukhtar Malik* Turning Modified Titanium with Al2O3 Coated Cemented Carbide (Widia DCMT 11304)

2004

25. Rozaimi Bin Mohd. Saad*

Kajian Pembentukan Tegasan dan Anjakan Pada Matalat pemotong Disebabkan oleh Parameter Pemotong Menggunakan Kaedah Unsur Tak Terhingga (FEA)

2003

Post Graduate (M. Eng. (I E))

1. Hamid Taghizadeh A Case Study of Improving the Production Process in Apadanaceram Company using Lean Six Sigma

On-going

2. Sadegh Parhizkar Lean Six Sigma Implementation in the Emergency Department of a Private Hospital

On-going

3. Mohd Aidil Rosli# A Study Effects of Chemical Mechanical Polishing (CMP) Parameters and Pad Roughness for NiP/Al Substrate Surface Characteristic

On-going

4. Ehsan Fallahi Arezoudar Performance Evaluation of Electrospinning Process to Fabricate Core/Shell Structure of Magnetic Nanofibers

2013


5. Alireza Khademi Development and Optimization of Submerged Membrane Ultrafiltration System using Artificial Neural, Networks and Particle Swarm Optimization Methodology

2013

6. Eliyana binti Mohd Eadey

Effectiveness of Six Sigma Implementation in Hard Disc Manufacturing Company

2013

7. Azmiyantie binti Ahmad Quality Improvement of Electroless Nickel Process used in Hard Disc Industry

2012

8. Al Amin bin Haji Mohamed Sultan

Lean Manufacturing Implementation at an Automotive Manufacturing Company

2012

9. Pezhman Ghadimihamzehkoulaei

Application of sustainable product design assessment tool for typical product

2011

10. Mohammad Ehsan Torabizadeh

Alignment of Information System Strategies with Supply Chain Strategies and Impact on Supply Chain Performance and Firm Performance in Automotive Firms

2011

11. Mohamad Ikbar Abdul Wahab

Quality Improvement at Automotive Company Using Six Sigma Methodology

2011

12. Jonathan Wee Total Productive Maintenance in Manufacturing Industry in Malaysia

2011

13. Saman Jafartayari Sustainabilty Awareness Assessment in Malaysian Manufacturing Industries

2010

14. Norafifah Husin Application of DOE Techniques in the Two-Step Pretreatment Process for Diamond Coating

2009

15. Noor Adila binti Aluwi Shakir

Application of DOE Techniques in the Single Step Pretreatment Process for Diamond Coating

2009

16. Geeva Raj A/L Ramanathan#

Total Quality Management (TQM) at an Original Device Manufacturer (ODM) A Case Study: Failure Analysis Department

2009

Post Graduate (M. Sc. (EBM, SEAL))

1. Nithian Kumar Kasava

Turn Around Time Reduction at an Aircraft Maintenance, Repair and Overhaul Workshop

2011

2. Saravanan G Jayaraman

Implementation of Total Productive Maintenance (TPM) at Integrated Heat Spreader (IHS) Process

2010

3. Satian S/O Rong Effectiveness of Vehicle Maintenance System in Malaysian Army: A Case Study at Army Divisional Workshop

2010

4. Kaharuddin bin Katan

Improvement of Supply Chain Management for ‘B’ Vehicle Spares in Malaysian Army

2009

Note:


* Co-supervisor + Part time # Persisir Others are main/sole supervisor Undergraduate

Currently Supervising 0 Completed Supervising More than 70

The supervision of the above undergraduate final year projects encompasses various topics such as Quality Improvement in Manufacturing Companies involving techniques such as Design of Experiment, Statistical Process Control, Quality Function Deployment, Six Sigma and PDCA Cycle; Application of Industrial Engineering Techniques in Manufacturing Companies such Method Study, Work Measurement, Project Management, Production and Inventory Control; Quality Management; Machinability Studies and CAD/CAM Applications.

10. Research Experience

Name of project Period Role

1. Novel Approach in Synthesizing Nanostructured Mix Matrix Membrane PES-CNT for Hemodialysis via Microwave Assisted Technology (FRGS) (R.J130000.7824.4F236) (RM100,000) 2013-2015 Project Leader

2. Synthesis of Nano-Crystalline Metal And Binary/Ternary Alloy Powders by Attrition Milling/Mechanical Alloying for Aerospace and Power Generation Industries (GUP) (Q.J130000.2524.02H55) (RM 150,000) 2012-2013 Project Leader

3. Application, Performance Evaluation and Optimization of Membrane System in Chemical Process Industry (LRGS) (R.J130000.7824.4L804 ) (RM1,368,500) 2011-2014 Project Leader

4. Development Of Photocatalytic Fe2O3 Nanofibers by Electrospinning for Treatment of Wastewater Containing Metals Ion (GUP) (Q.J130000.2513.02H15) (RM150,000) 2011-2013 Project Leader

5. Investigative Study on the Use Electrodeposited Interlayers for Diamond Coated WC Substrates (FRGS) (78572) (R.J130000.7824.3F505) (RM48,000) 2010-2012 Project Leader

6. Development of New Shaping Technique for Thin and Thick Diamond Films (Nippon Sheet Glass Foundation For Materials Science & Engineering) (73333) US $3,000 2009-2011 Project Leader


7. Feasibility Study of Using Vegetable Oil as a Cutting Lubricant Through the Use of Minimum Quantity Lubricant during Machining (IRPA 78055) RM50,000. 2007-2009 Project Member

8. Performance Evaluation Of Advanced Finish Sanding On Wood Surface (IRPA 79065) RM234,917 2006- 2008 Project Member

9. High performance blended membranes using a novel preparation techniques (IRPA 79037) RM187,996 2006-2008 Project Member

10. Determination of the optimum cutting conditions for coated carbide and ceramic cutting tools when turning hardened tool steel (IRPA 74268) RM109,000. 2004-2007 Project Leader

11. Development of endmills, drills and turning tools from ultrafine grained carbides and oxides for aerospace, automotive and mold & die applications (IRPA 74545) RM679,200. 2004-2007 Project Member

12. Development of ultra-thin coated precision cutting tools for turning and milling (IRPA 74546) RM2,170,000. 2004-2007 Project Member

13. Development of new binderless diamond coated wheels for ultra precision grinding (IRPA 74540) RM3,629,560. 2004-2007 Project Member

14. Production of flat and hollow fiber membranes for biodialysis membranes (IRPA 74246) RM189,000. 2003-2005 Project Member

15. Performance evaluation of carbide tools on machining aerospace materials - Titanium alloys (IRPA 74122) RM195,940. 2003-2005 Project Member

16. Comparison of the Immobilised Technique with Free Cell Fermentation in Lactic Acid Production (IRPA 75089) RM 47,000 2004-2005 Project Member

17. Production of composite hollow fiber membranes for bioseparation (IRPA 74170) RM186,000. 2003-2006 Project Member

18. Ultra-Precision Turning of Symmetrical and Non-Symmetrical Silicon Surfaces for Laser Application (IRPA 74218) RM153,200. 2003-2006 Project Member

19. Fabrication of laser crystal for electro-optic application (IRPA 74530) RM2,000,000. 2002-2008 Project Member

20. Ductile mode grinding and polishing of aspheric, toric, and plane surfaces on glass and silicon (IRPA 74065) RM198,560. 2002-2005 Project Member

21. Performance evaluation of new diamond tools for Malaysia’s precision industries (IRPA 72255) RM266, 950. 2000-2002 Project Member


22. Machinability database and performance evaluation of advanced cutting tools for Malaysian manufacturing industries (IRPA 72196) RM289,750. 1999-2003 Project Member

11. Consultancy Experience

Name of project Year Role

1. CNC equipment acquision by Fac. of Mechanical Engineering, Kolej Universiti Kejuruteraan dan Teknologi Malaysia 2004 Advisor

2. Evaluation of carbide tools when endmilling tool steel for Precisetech Sdn. Bhd. 2004 Project member

3. Simulation studies for the production of flanges for TWP 1997 Group Leader

4. A proposal for the philosophy of operation and acquisition of a rapid prototyping system for the Bureau of Innovation and Consultancy, UTM 1996 Project Member

5. Feasibility study of a Marine Technology Business Academy for Penang Shipbuilding and Construction 1996 Project Member

6. Setting upof assembly facilities for water pump (MD 172270) 4G1 assembly for Syarikat Rahman Brothers Industries 1996 Project Member

7. Workshop layout and equipment specification for Tenaga Nasional Berhad 1994 Project Member

8. Reverse engineering and CAD of a rear car lamp for OrcaDesign Consulatant 1994 Project Member

9. Setting up CAD/CAM facilities at Kolej Ugama Sultan Zainal Abidin 1992 Project Member

10. Feasibilty study on the manufacture of electric motors for Bank Industri 1988 Project Member

12. Publication

Journal including refereed proceedings

1. Ehsan Fallahiarezoudar, Mohaddeseh Ahmadipourroudposht, Noordin Mohd Yusof & Ani Idris (20xx) Fabrication (Ferrofluid/Polyvinyl Alcohol) Magnetic Nanofibers via Co-Axial Electrospinning, Journal of Dispersion Science and Technology, DOI: 10.1080/01932691.2014.888005 ( IF 0.60)

2. H.A. Wahab, M.Y. Noordin, S. Izman, Z. Kamdi, D. Kurniawan (2014) Composition Modification of Electroplated Nickel Interlayer on Tungsten Carbide Substrate by


Thermal Carburizing. Advanced Material Research. 845 (2014). 378-381 (Scopus Indexed)

3. Salwa Mahmood, Nur Syamimi Jiran, Muhamad Zameri Mat Saman & Noordin Mohd Yusof. (2014). Determination of Parameters for Sustainability Assessment of Hollow Fiber Membrane Module Life Cycle. Advanced Material Research. 845 (2013). 724-729 (Scopus Indexed)

4. Salwa Mahmood, Abdul Rahman Hemdi, Muhamad Zameri Mat Saman & Noordin Mohd Yusof. (2014). Fuzzy Logic Approach for Assessing Sustainability: Methodology Development for Hollow Fiber Membrane Module. Advanced Material Research. 845 (2013) 579-583 (Scopus Indexed)

5. Nur Syamimi Jiran, Salwa Mahmood, Muhamad Zameri Mat Saman & Noordin Mohd Yusof. (2014). Review on Methodology for Life Cycle Costing of Membrane System for Wastewater Filtration. Advanced Material Research. 845 (2013) 713-719 (Scopus Indexed)

6. Mohsen Marani Barzania, Saeed Farahany, Noordin Mohd Yusof & Ali Ourdjini (2013) The Influence of Bismuth, Antimony and Strontium on Microstructure, Thermal and Machinability of Aluminium-Silicon Alloy, Materials and Manufacturing Processes, 28: 1184–1190 (IF 1.297)

7. M. Mohammadzadeh Sari, M. Y. Noordin & E. Brusa (2013) Role of multi-wall carbon nanotubes on the main parameters of the electrical discharge machining (EDM) process, The International Journal of Advanced Manufacturing Technology, September 2013, Volume 68, Issue 5-8, pp 1095-1102. (IF 1.103)

8. Alireza Khademi, Nafiseh Ghorbani Renani, Maryam Mofarrahi, Alireza Rangraz Jeddi, Noordin Mohd Yusof (2013) The Best Location for Speed Bump Installation using Experimental Design Methodology, Promet – Traffic&Transportation, Vol. 25, 2013, No. 6, 565-574. (0.300)

9. Pezhman Ghadimi, Noordin Mohd Yusof, Muhamad Zameri Mat Saman and Mahmood Asadi (2013) Methodologies for Measuring Sustainability of Product/Process: A Review, Pertanika J. Sci. & Technol. 21 (1): 295 – 318. (Scopus Indexed)

10. Hassan A. Wahab, M. Y. Noordin, S. Izman, and Denni Kurniawan, “Quantitative Analysis of Electroplated Nickel Coating on Hard Metal,” The Scientific World Journal, vol. 2013, Article ID 631936, 6 pages, 2013. doi:10.1155/2013/631936 (IF 1.73)

11. Daroonparvar. M, M. A. Mat Yajid, Noordin. M. Y, M. S. Hussain. (2013). Formation of a dense and continues Al2O3 layer in nano thermal barrier coating systems for suppression of the spinels growth on the Al2O3 oxide scale during oxidation. Journal of Alloys and Compounds. 571 (2013) 205-220 (IF 2.29)

12. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd. Yusof, Hamid Reza Bakhsheshi-Rad, Mohammad Sakhawat Hussain, and Esah Hamzah (2013). Evaluation of Normal and Nanolayer Composite Thermal Barrier Coatings in Fused Vanadate-Sulfate Salts at 10000C. Advances in Materials Science and Engineering. vol. 2013, Article ID 790318, 13 pages. doi:10.1155/2013/790318 (IF 0.500)


13. Adam Umar Alkali, Noordin Mohd Yusof, Mohamed Handawi Sa’ad Elmunafi, and Hasan Fawad (2013) Influence of Cutting Conditions on Chip Formation When Turning ASSAB DF-3 Hardened Tool Steel, International Journal of Materials, Mechanics and Manufacturing, Vol. 1, No. 1, February 2013, 76-79.

14. A. Rangraz Jeddi, A. Khademi, A. Malek, N. Ghorbani Renani, M. Y. Noordin (2013) Multi Objective Optimization of Servers Number in Auto After-Sales Service, International Review on Modelling and Simulations (IREMOS), Vol. 6, N. 1, February 2013, 270-276 (Scopus Indexed).

15. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, M. Y. Noordin, and Mohammad Sakhawat Hussain, The Role of Nanostructured Al2O3 Layer in Reduction of Hot Corrosion Products in Normal YSZ Layer, Journal of Nanomaterials, vol. 2013, Article ID 251921, 11 pages, 2013. doi:10.1155/2013/251921 (IF 1.376)

16. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, and Mohammad Sakhawat Hussain, Improved Thermally Grown Oxide Scale in Air Plasma Sprayed NiCrAlY/Nano-YSZ Coatings, Journal of Nanomaterials, vol. 2013, Article ID 520104, 9 pages, 2013. doi:10.1155/2013/520104 (IF 1.376)

17. Daroonparvar. M, M. A. Mat Yajid, Noordin M. Y. (2013). Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as a third layer, Transactions of Nonferrous Metals Society of China. 23 (5), 1322-1333 (IF 0.917)

18. Hassan A.Wahab, M.Y. Noordin, M. S. Hussain, S. Izman (2013) Characteristics of electroplated nickel layer on tungsten carbide, Applied Mechanics and Materials, Vol. 315 (2013) pp 73-77 (Scopus Indexed)

19. Salwa Mahmood, Muhammad Zameri Mat Saman, Noordin Mohd Yusof (2013) Life Cycle Assessment of Membrane System for Wastewater Treatment: A Review and Further Research, Applied Mechanics and Materials, Vol. 315 pp 186-191 (Scopus Indexed)

20. Ali Davoudinejad, M.Y. Noordin, Danial Ghodsiyeh, Sina Alizadeh Ashrafi, Mohsen Marani Barzani (2013) Effect of Tool Wear on Tool Life and Surface Finish in Machining of Hardened DF-3 Tool Steel, Applied Mechanics and Materials, Vol. 315 (2013) pp 241-245 (Scopus Indexed)

21. Mohsen Marani Barzani, Noordin Mohd Yusof, Ali Akhavan Farid, Saaed Farahany, Ali Davoudinejad (2013) Effects of cutting condition on surface roughness when turning untreated and Sb-treated Al-11%Si alloys using PVD coated tools, Applied Mechanics and Materials, Vol. 315, pp 413-417 (Scopus Indexed)

22. Adnan Hj. Bakri, Abdul Rahman Abdul Rahim, Noordin Mohd Yusof (2013) Total Productive Maintenance: Competing or Complementary to Other Initiatives? Applied Mechanics and Materials, Vol. 315, pp 472-476 (Scopus Indexed)

23. H. Norafifah, M.Y. Noordin, S. Izman, D. Kurniawan (2013) Acid Pretreatment of WC-Co for Surface Roughening and Cobalt Removal Prior to CVD Diamond Coating, Applied Mechanics and Materials, Vol. 315, pp 592-596 (Scopus Indexed)

24. D. Kurniawan, N. Jiawkok and M. Y. Noordin (2013) Machining Conditions Effect to Machining Temperature and Forces in Orthogonal Machining of Bone, Advanced Materials Research Vol. 658, pp 223- 226 (Scopus Indexed)

25. Seyed Mojib Zahraee, Milad Hatami, Noordin Mohd Yusof, Jafri Mohd. Rohani, Farhad Ziaei (2013) Combined Use of Design of Experiment and Computer Simulation for


Resources Level Determination in Concrete Pouring Process, Jurnal Teknologi, 64:1 (2013) 43–49 (Scopus Indexed)

26. Ani Idris, Effaliza Misran, and Noordin Mohd Yusof (2013) Treatment of Cr(VI) Using Polyvinyl Alcohol-Alginate Ferro Photo Gels Under Different Types of Lamps, Adv. Sci. Lett. 19, 2667-2670 (Scopus Indexed)

27. Nur Diana Mohd Noor, Noordin Mohd Yusof, Iqbal Ahmed, Mehrdad Hesampour and Ani Idris (2013) Influence of Sodium Bromide Additive on Polyethersulfone (PES) Ultrafiltration Membrane, Journal of Applied Polymer Science. 128 (3), 1746–1755 (IF 1.289)

28. Salwa Mahmood, Abdul Rahman Hemdi, Muhamad Zameri Mat Saman & Noordin Mohd Yusof (2013) Sustainability Assessment of Membrane System for Wastewater Treatment: A Review and Further Research. In Andrew Y. C. N., Bin Song & Soh Khim Ong, Re-engineering Manufacturing for Sustainability (pp. 487-492). Singapore: Springer.

29. Ani Idris, Effaliza Misran, Noordin Mohd Yusof (2012) Photocatalytic Reduction of Cr(VI) by PVA-Alginate Encapsulated γFe2O3 Magnetic Beads using Different Types of Illumination Lamp and Light, Journal of Industrial and Engineering Chemistry 18, 2151–2156 (IF 2.149)

30. Jonathan Wee Jian Meng and Noordin Mohd Yusof (2012) Survey Results of Total Productive Maintenance Effects on Manufacturing Performance in Malaysia Electrical And Electronics Industry, Jurnal Mekanikal 35, 82-99

31. M.Y. Noordin, A.S. Noor Adila, S. Izman, D. Kurniawan (2012) Acid Pretreatment of WC-Co Prior to CVD Diamond Coating, Advanced Materials Research Vol. 576 pp 626-629 (Scopus Indexed)

32. Pezhman Ghadimi, Amir Hossein Azadnia, Noordin Mohd Yusof, Muhamad Zameri Mat Saman (2012) A Weighted Fuzzy Approach for Product Sustainability Assessment: A Case Study in Automotive Industry, Journal of Cleaner Production 33, 10-21 (IF 2.425)

33. Noordin, M.Y., Kurniawan, D., Tang, Y.C., Muniswaran, K. (2012) Feasibility of Mild Hard Turning of Stainless Steel Using Coated Carbide Tool. International Journal of Advanced Manufacturing Technology. Volume 60, Issue 9, Page 853 (IF 1.068).

34. M.Y. Noordin, Ali Davoudinejad, Mohd Rosmaini Shaari (2012) Effect of Tool Edge Geometry on Cutting Force and Surface Roughness when Hard Turning Tool Steel. Advanced Materials Research Vol. 505 (2012) pp 15-19 (Scopus Indexed)

35. Mohsen Marani Barzani, Noordin Mohd Yusof, Saaed Farahany, Ali Ourdjini (2012) Effect of machining parameters on cutting force when turning untreated and Sb-treated Al-11%Si-1.8%Cu alloys using PVD coated tools. Advanced Materials Research Vol. 234 (2012) pp 74-77 (Scopus Indexed)

36. MM Sari, MY Noordin, E Brusa (2012). Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes. IOP Conference Series: Materials Science and Engineering 40 (1), 012019 (Scopus Index).

37. Ani Idris, Attaullah Bukhari, Noordin Mohd Yusof and K. G. Tan (2012). A Simultaneous Cooling and Dielectric Heating: An Advanced Technology to Improve the Yield of Lactides. Progress In Electromagnetics Research Symposium Proceedings, 141-145.


38. Pezhman Ghadimi, Noordin Mohd Yusof, Muhamad Zameri Mat Saman. (2011) A Graphical User Interface (GUI) For Assessing The Sustainability Level Of Manufactured Products: An Automotive Component Case Study. PERINTIS e-Journal, 1, 10-16.

39. M.A. Kamely, M.Y. Noordin (2011), The Impact of Cutting Tool Materials on Cutting Force, World Academy of Science, Engineering and Technology 75, 904-907.

40. Iqbal Ahmed, Ani Idris, Noordin Mohd Yusof and Rizwan Rajput (2011), High Performance Ultrafiltration Membranes Prepared by the Application of Modified Microwave Irradiation Technique, Industrial and Engineering Chemistry Research, 50, 2272-2283 (IF 2.071)

41. Kurniawan, Denni, Yusof, Noordin Mohd. and Sharif, Safian (2010), Hard Machining of Stainless Steel Using Wiper Coated Carbide: Tool Life and Surface Integrity, Materials and Manufacturing Processes, 25: 6, 370 – 377 (IF 0.802)

42. Ani Idris, Nursia Hassan, Suriani Mohd Ismail, Effaliza Misran, Noordin Mohd Yusof. (2010). Photocatalytic Magnetic Separable Beads for Chromium (VI) Reduction. Water Research, 44 (6) 1683-1688 (IF . 4.355)

43. Kamely, M.A., Noordin, M. Y., Ourdjini, A., Venkatesh, V.C., Razali, M.M. (2008). Alternative Low Cost Cutting Tools for Hard Turning of AISI D2. Journal of Advanced Manufacturing Technology, 2(2): 29 -37.

44. Ahmad Kamely Mohamad, Noordin Mohd Yusof, Ali Ourdjini, Vellore Chelvaraj Venkatesh (2008). The effectiveness of coatings when turning hardened cold work tool steel AISI D2 (60 HRC). International Journal of Machining and Machinability of Materials, 4 (1): 63 – 75.

45. Noordin Mohd Yusof, Affandi M. Zainal, Hendriko, Denni Kurniawan (2008) Hard Turning of Cold Work Tool Steel using Wiper Ceramic Tool, Jurnal Mekanikal, Jld. 25, 92-105.

46. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh (2007). The effect of multiple pass cutting on surface integrity when hard turning of AISI D2 cold work tool steel. International Journal of Precision Technology, 1: 97 – 105.

47. M.Y. Noordin, D. Kurniawan, S. Sharif (2007). Hard turning of stainless steel using wiper coated carbide tool. International Journal of Precision Technology, 1: 75 – 84.

48. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2007). The use of TiAlN coated carbide tool when finish machining hardened stainless steel. International Journal of Precision Technology, 1: 21 – 29.

49. M.Y. Noordin, V.C. Venkatesh and S. Sharif (2007), Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools. Journal of Materials Processing Technology, 185: 83–90.

50. Md. Fauzi Bin Ahmad, Sha’ri Mohd Yusof & Noordin Mohd Yusof (2007), Comparative Study Of Quality Practices Between Japanese And Non–Japanese Based Electrical And Electronics Companies In Malaysia: A Survey. Jurnal Teknologi, 47 (A) Dis. 2007: 75–89.

51. Ani Idris, Norashikin Mat Zain, M.Y. Noordin (2007), Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, Volume 207, Issues 1-3, 324-339


52. Ani Idris, Suzana Wahidina and M.Y. Noordin (2006), Application of two-level full factorial design to lactic acid production using immobilized lactobacillus delbrueckii from pineapple waste. Journal of Science and Technology In the Tropics. JOSIT.Vol 2 No 1 June 2006

53. Ani Idris, Farida Kormin and M.Y. Noordin (2006). Application of response surface methodology in describing the performance of thin film composite membrane. Separation and Purification Technology, 49 (3): 271-280.

54. M.Y. Noordin, V.C. Venkatesh, S. Sharif, S. Elting and A. Abdullah. (2004). Application of Response Surface Methodology in Describing the Performance of Coated Carbide Tools when Turning AISI 1045 Steel. Journal of Materials Processing Technology. 145: 46-58.

55. M.Y. Noordin, V.C. Venkatesh, S. Sharif, D. Sarathy and A. Abdullah. (2004). Cutting Performance of Coated Diamond and Triangular-Shaped Carbide Inserts when Turning AISI 1045 Steel. Pertanika Journal of Science & Technology. Supplement 12(1): 73-84.

56. Ani, I., Noordin, M.Y., Ismail A.F. and Shilton, S.J. (2002). Study of Shear Rate Influence on the Performance of Cellulose Acetate Reverse Osmosis Hollow Fiber Membranes. Journal of Membrane Science. 202: 205-215.

57. Ani, I., Ismail, A.F, Noordin, M.Y., and Shilton, S.J. (2002). Optimisation of Cellulose Acetate Hollow Fiber Reverse Osmosis Membrane Production Using Taguchi Method. Journal of Membrane Science. 205: 223-237.

58. Noordin, M.Y., Venkatesh, V.C. Chan, C.L. and Abdullah, A. (2001). Performance Evaluation of Cemented Carbide Tools in Turning AISI 1010 Steel. Journal of Materials Processing Technology. 116: 16-21.

Total no of citations: More than 380 (Scopus)

h index = 10 (Scopus)

More than 700 (Google Scholar)

h index = 10 (Google Scholar)

Conference/Seminar/Colloquium/Articles

1. Noordin Mohd Yusof, Muhamad Zameri Mat Saman, Nithia Kumar Kasava (2013) A

conceptual sustainable domain value stream mapping framework for manufacturing. 12th Global Conference on Sustainable Manufacturing (GCSM2013), Berlin, Germany 23rd – 25th September, 2013. 54-59

2. Aluwi, N.A., Husin, N., Mohd Yusof, N., Sudin, I. and Wong, K.Y. (2013) Development and Optimization of Submerged Membrane Ultrafiltration System Using Artificial Neural Networks and Particle Swarm Optimization Methodology, Submitted to the 11th International Conference on Membrane Science and Technology (MST2013), Kuala Lumpur, Malaysia.

3. Nur Syamimi Jiran, Muhamad Zameri Mat Saman and Noordin Mohd Yusof (2013). Life Cycle Costing of the Membrane System for Wastewater Treatment: A Review and Further Research, 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), UTM Johor Bahru, Johor.


4. Mohsen Kamrani, Shahab Sariatmadari, Reza Hassanzadeh Abbasabadi, Noordin Mohd. Yusof and Jafri Mohd. Rohani (2013). Improving Customer Waiting Time by using Six Sigma Methodology, 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), UTM Johor Bahru, Johor.

5. Alireza Khademi, Seyedeh Sabereh Hosseini, Seyed Ali Mirzapour, Shahab Khademi, Alireza Rangraz Jeddi, Noordin Mohd Yusof and Jafri Mohd Rohani (2013). Taguchi Design of Experiments Application on Determining Speed Bump Location, 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), UTM Johor Bahru, Johor.

6. Adnan Hj. Bakri, Abdul Rahman Abdul Rahim, Noordin Mohd. Yusof (2012). Towards Successful Total Productive Maintenance (TPM): How Well The Management Commitment Being Assessesed? Proceeding of the International Conference on Management, Economics and Finance (ICMEF 2012), 15th - 16th October 2012. Hilton Hotel, Kuching, Sarawak, Malaysia, 585-590, ISBN: 978-967-5705-09-0.

7. Adnan Hj. Bakri, Abdul Rahman Abdul Rahim, Noordin Mohd. Yusof, Ramli Ahmad (2012) Boosting Lean Production via TPM, Procedia - Social and Behavioral Sciences 65, 485 – 491

8. Rusdi Nur, Noordin Mohd Yusof, Izman Bin Sudin and Deni Kurniawan (2012). Calculation of Energy Consumption in Machining of Hardened Stainless Steel. Proceeding of the International Conference on Sustainable Energy and Development for Future Generations, Makassar, Indonesia, 12 July 2012, 199-207.

9. A.S. Mohruni, S. Sharif, M.Y. Noordin, R. Hanson (2011). Optimization of Cutting Conditions when End Milling Aeronautic Materials (Ti-6Al-4V) using Genetic Algorithm and Response Surface Methodology. Proceeding of the 12th International Conference on QiR (Quality in Research) Bali, Indonesia, 4-7 July 2011, 1384-1389.

10. M. Mohammadzadeh S., M.Y. Noordin and M. Sakhawat Hussain (2011). Machinability of AISI H13 Tool Steel when Using the EDM Process with Carbon Nanotubes. 1st International Conference on Composites and Nanocomposites (ICNC2011), Kottayam, India, January 7 - 9, 2011, IL 13.

11. M. Thirumurgan, Noordin Mohd Yusof and Muhamad Zameri Mat Saman. (2009) Sustainability Assessment Methodology: a Review and Research Direction, 7th Global Conference on Sustainable Manufacturing, Chennai, India, 2-4 December 2009, pp. 379-384.

12. A.S Mohruni, S. Sharif, M.Y. Noordin, Santo.P.S (2009). Implementation of Genetic Algorithm in Tool Life Optimization when End Milling of Ti64 using TiAlN Coated Tools, Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII, Universitas Diponegoro, Semarang 11-12 Agustus 2009, 199-206.

13. A.S. Mohruni, S. Sharif, M.Y. Noordin, H. Faizal (2009). Optimization of Surface Roughness in End Milling Ti-6Al-4V USING TiAlN Coated Tools By Utilizing Genetic Algorithm, Seminar on Application and Research in Industrial Technology, SMART, Yogyakarta, 22 Juli 2009, C-018-C024.

14. Noordin M.Y., Effendy, Kurniawan, D. (2008) Tool Wear and Tool Life Performance of TiAlN Coated Carbide Cutting Tools when Turning Hardened Cold Work Tool Steel. Proceedings of International Graduate Conference on Engineering and Science 2008. December 23-24. Johor Bahru: SPS UTM and PGSS UTM, B37 1-7.


15. Noordin M.Y., Kurniawan, D., Sharif, S., Kadir, M.R.A. (2008) Dry Machining of Hardened Stainless Steel Using Coated Carbide Cutting Tool with Wiper Geometry: Determination of Optimum Cutting Parameters Using Empirical Modeling Approach. Proceedings of the 9th Asia Pacific Industrial Engineering & Management Systems Conference. December 3–5. Nusa Dua: APIEMS, 1291– 1298.

16. Ani Idris, Iqbal Ahmed, Noordin, M.Y. (2008). Dissolution of Polyethersulfone Ultrafiltration Membrane using Microwave Technique. IChemE Conference. UK

17. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2008). The Effect of Cutting Speed and Coating Materials on Chip Formation when Hard Turning AISI D2 Cold Work Tool Steel (60 HRC). Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2008). January 26 - 27. SME-UTM S227, 107 - 111.

18. M. Z. Mat Saman, M. Y. Noordin, M. S. Nabi Baksh (2007). UTM’s Experience in Industrial Engineering Education. e-Proceedings of the 2nd Regional Conference on Engineering Education (RCEE 2007). 3-5 December 2007. Johor Bahru: Universiti Teknologi Malaysia, 512-516.

19. M. Y. Noordin, D. Kurniawan, S. Sharif (2007). Evaluation on Machined Surface of Hardened Stainless Steel Generated by Hard Turning Using Coated Carbide Tools with Wiper Geometry. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A4.

20. Wan Emri Wan Abdul Rahaman, M. Y. Noordin, D. Kurniawan (2007). Tool life and surface roughness of ceramic cutting tool when turning AISI D2 tool steel. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A4.

21. S. Sharif, Rival, Noordin M.Y. (2007). Surface Defects in PMD-EDM of Titanium Alloy, Ti-6246. e-Proceedings of the National Metallurgical Conference 2007 (NMC 2007). 26th & 27th Nov. 2007. Johor Bahru: Universiti Teknologi Malaysia, Session A5.

22. S. Sharif, Rival and Noordin M.Y. (2007). Effect of using SiC on Surface Integrity of Titanium Alloy, Ti-6246 in PMD-EDM. Manufacturing Engineering, Automation and Robotics Proceedings 3rd World Engineering Congress 2007. 5 – 9 August 2007. Penang.

23. Dwi Agustina Kurniawati and M. Y. Noordin (2006). A Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organizations. Proceedings of Abstracts and Papers (on CD-ROM) of The 7th Asia Pacific Industrial Engineering and Management Systems Conference 2006 (V. Kachitvichyanukul & D. Kritcharnchai, editors). 17-20 December. Bangkok: Asian Institute of Technology, 249 – 260.

24. Kurniawati, D. A and Noordin M. Y. (2006). A Quality Management System Framework for Small Manufacturing Organizations (A Case Study). Proceeding International Conference on Technology and Operations Management. December 1 - 2. Bandung: Aula Barat & SBM-ITB, 161-170.

25. Affandi M. Zainal, M. Y. Noordin, D. Kurniawan, S. Sharif and Y. C. Tang (2006). Advances in Machining Hard-To-Cut Materials : The Use of Coated Carbide and Ceramic Cutting Tools. Proceeding International Conference on Technology and Operations Management. December 1 - 2. Bandung: Aula Barat & SBM-ITB.


26. D.A. Kurniawati, M.Y. Noordin (2006). The Application of the Generic Framework for Developing a Quality Management System (QMS) for Small Manufacturing Organizations (FDQSMO). Proceedings of the 9th International Conference on Quality in Research (9th QiR-2006). September 6-7. Depok: Faculty of Engineering, University of Indonesia, IMM-08.

27. A.S. Mohruni, S. Sharif, M.Y. Noordin, V.C. Venkatesh (2006). Investigation of Optimum Cutting Condition When End Milling Titanium Alloy Ti-6Al-4V. Proceedings of the 9th International Conference on Quality in Research (9th QiR-2006). September 6-7. Depok: Faculty of Engineering, University of Indonesia, IMM-26.

28. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2006). Tool life investigation of PVD TiAlN coated carbide insert when turning hardened tool steel. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 51-54.

29. S. Sharif, A.S. Mohruni, M.Y. Noordin, V.C. Venkatesh (2006). Optimum Surface Roughness Prediction Model when End Milling Titanium Alloy (Ti-6Al-4V). Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 55-58.

30. M.Y. Noordin, Denni Kurniawan, S. Sharif, Tang Yu Cai (2006). On Hard Turning of Martensitic Stainless Steel Using Geometrically Modified Coated Carbide. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 90-93.

31. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh (2006). The Effect of Multiple Pass Cutting on Surface Integrity when Hard Turning of AISI D2 Cold Work Tool Steel. Proceedings of the International Conference on Manufacturing Science and Technology (ICOMAST-2006). August 28 – 30. Melaka: Faculty of Engineering and Technology, MMU, 98-101.

32. M.Y. Noordin, Y.C. Tang, D. Kurniawan (2006). RSM Tool Life Modeling for Medium Hard Turning using PVD TiAlN Coated Carbide Inserts, International Conference on Advances in Materials and Processing Technologies (AMPT 2006). July 30-August 3. Las Vegas.

33. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2006). An experimental investigation of coated ceramic cutting tools when hard turning cold work tool steel, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 325-329.

34. A.S. Mohruni, S. Sharif, M.Y. Noordin (2006). Cutting Force Predictions Models in End Milling Titanium Alloy Ti-6Al-4V, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 337-342.

35. M.Y. Noordin, D. Kurniawan, S. Sharif, Y.C. Tang (2006). Performance of wiper coated carbide tool when turning hardened stainless steel, eProceedings of the 1st Regional Postgraduate Conference on Engineering & Science (RPCES 2006), July 26 – 27. SPS & PPI UTM, 381-385.

36. S. Sharif, A. S. Mohruni and M. Y. Noordin (2006). Modeling of Tool Life when End Milling on Titanium Alloy (Ti-6AL-4V) using Response Surface Methodology, Proceedings of the 1st International Conference & 7th AUN/SEED-NET Fieldwise


Seminar on Manufacturing and Material Processing, March 14-15. Kuala Lumpur, 127 – 132

37. S. Sharif, Rival and M. Y. Noordin (2006). Machinability Modeling in Powder Mixed Dielectric EDM of Titanium Alloy Ti-6246, Proceedings of the 1st International Conference & 7th AUN/SEED-NET Fieldwise Seminar on Manufacturing and Material Processing, March 14-15. Kuala Lumpur, 133 – 138

38. M.Y. Noordin, D. Kurniawan, and S. Sharif. Surface Integrity of Martensitic Stainless Steel Machined by Wiper Coated Carbide Tool, 5th International Materials Technology Conference and Exhibition (IMTCE 2006). July 17 – 20. Kuala Lumpur.

39. M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan (2006). Performance of Coated Ceramic Cutting Tools when Machining Hardened Steel, 5th International Materials Technology Conference and Exhibition (IMTCE 2006). July 17 – 20. Kuala Lumpur.

40. Mohd. Zakri Rosley, M.Y. Noordin and Rozlina Mat Sirat (2006). Application of Quality Function Deployment (QFD) for Determining Key Product Characteristics of a Highlight Marker. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 75 - 79.

41. M.H Azmi and M.Y. Noordin (2006). Development of an Initial Fuzzy Expert System for Machinability Data. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 81 – 87.

42. M.A. Kamely, M.Y. Noordin and M.J. Junasri (2006). Experimental Investigation of Multilayer Coating Performance on CBN Cutting Tools when Turning of Hardened AISI D2 Cold Work Tool Steel. Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227, 145 - 150.

43. S. Sharif, Rival and M.Y. Noordin (2005). Electrical Discharge Drilling of Titanium Alloy Ti-6246. Proceedings of the National Conference on Advances in Mechanical Engineering 2005 (NAME’ 05) Vol. 2. May 18 – 20. Kuala Lumpur: Pusat Penerbitan Universiti (UPENA), UiTM, 431 – 438.

44. M.Y. Noordin. (2004). Use of Response Surface Methodology for Modelling and Optimization of Cutting Performance when Turning Hardened Tool Steel using Coated Cermet Tool. Bulletin of the FKM Colloquium. 1(1): 32-36.

45. M.Y. Noordin, V.C. Venkatesh and S. Sharif. (2004). Wear Comparison Studies between Coated Cermet and Coated Carbide Tools when Turning Hardened Stainless Tool Steel. Proceedings of the 3Rd International Conference on Advanced Manufacturing Technology (ICAMT-2004). May 11 - 13. Kuala Lumpur: Research Centre IIUM, 195 - 202.

46. Ani Idris, Faridah Kormin, M.Y. Noordin. (2004). Study on the Composition Effect of Aqueous Phase Solution for the Production of Thin Film Composite Membrane Using Response Surface Methodology. (MSTC 2004).

47. M.Y. Noordin, V.C. Venkatesh, S. Sharif and A. Abdullah. (2003). Turning of Hardened Tool Steel using Coated TiCN based Cermet Tool. Proceedings of the 12th Electron Microscopy Conference. December 15 - 17. AMREC, 357 - 364.

48. Ani Idris and M.Y. Noordin. (2003). Effect of Bore Fluid on Reverse Osmosis Hollow Fiber Membranes. Proceedings of the 12th Electron Microscopy Conference. December 15 - 17. AMREC, 197 - 203.


49. Noordin, M.Y., Venkatesh, V.C., Sharif, S., and Abdullah, A. (2003). Wear of Coated Cermet Tool when Turning Hardened Tool Steel. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 241 - 246.

50. Noordin, M.Y., Venkatesh, V.C., Sharif, S., and Elting, S. (2003). Performance Modeling when Turning Hardened Tool Steel using Cermet Tool. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 235 - 240.

51. Venkatesh, V.C., Noordin, M.Y. and Santhira, B. (2003). Performance Evaluation of Whisker Reinforced Oxide Ceramic Cutting Tool during Hard Turning. Proceedings of the 3rd International Conference on Advances in Strategic Technologies (ICAST 2003) Volume I. August 12 - 14. Bangi, Selangor: Faculty of Engineering, UKM, 223 - 228.

52. Noordin, M.Y., Venkatesh, V.C., Sharif, S., D. Sarathy and Abdullah, A. (2002). Cutting Performance of Coated Carbide when Turning AISI 1045 Steel. Manufacturing Engineering, Automation and Robotics Proceedings 2nd World Engineering Congress. July 22 - 25. Serdang, Selangor: Universiti Putra Malaysia Press, 148 - 154.

53. Ani, I., Noordin, M.Y., Ismail, A.F. and Shilton, S.J. (2002). Application of Taguchi Analysis to Hollow Fiber Reverse Osmosis Manufacturing Process, Manufacturing Engineering, Automation and Robotics Proceedings 2nd World Engineering Congress. July 22 - 25. Serdang, Selangor: Universiti Putra Malaysia Press, 252 - 257.

54. Noordin, M.Y., Venkatesh, V.C., Lok, C.W., Sharif, S. and Abdullah, A. (2000). Performance Evaluation of Tool Geometry of a Multi Layer Tungsten Carbide Tool when Turning AISI 1045 Steel. Proceedings of 19th AIMTDR Conference. November. Mumbai: Narosa Publishing House, 299 - 304.

55. Noordin, M.Y., Venkatesh, V.C., Chan, C.L. and Abdullah, A. (2000). Performance Evaluation of Cemented Carbide Tools in Turning AISI 1010 Steel, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT-2000). August 16 - 17. Johor Bahru: Penerbit Universiti Teknologi Malaysia, 215 - 220.

56. Noordin, M.Y., Yee, B.T. and M. Zameri, M.S. (2000). Application of the Taguchi Method in Improving Quality, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT-2000). August 16 - 17. Johor Bahru: Penerbit Universiti Teknologi Malaysia, 351 - 357.

57. Abd. Rahman Abdul Rahim and Noordin Mohd. Yusof. (1997). Quality and its Related Issues, Seminar on Quality. Johor Bahru.

58. Noordin Mohd. Yusof and Abd. Rahman Abdul Rahim (1996). Manufacturing Engineering at Universiti Teknologi Malaysia, Proceedings of the 14th Conference of ASEAN Federation of Engineering Organisation (CAFEO’96). November 25 - 27. Malacca: Institution of Engineers, Malaysia, 479 - 494.

59. Awaluddin M. Shaharoun and Noordin M. Yusof. (1996). Financial Justification of CIM, Computer Integrated Manufacturing Seminar (CIMS 96). September 11 - 12. Johor Bahru.

60. Noordin M. Yusof and C. L. Ngeow. (1995). Application of MRP in a Local Manufacturing Company - A Case Study, Proceedings of the 3rd International Conference on Computer Integrated Manufacturing (ICCIM). July 11 - 14. Singapore.


61. Noordin M. Yusof and L.T. Yew. (1995). OLSPCS Application in Malaysian Based Semiconductor Manufacturing Companies, Proceedings of the 3rd International Conference on Computer Integrated Manufacturing (ICCIM). July 11 - 14. Singapore.

62. Noordin M. Yusof and S. Rajesham. (1995). Flexible Manufacturing System: Concepts and Applications, Seminar on Applications of Advanced Manufacturing Technology (M’TECH 95). July 15. Johor Bahru.

63. Noordin M. Yusof, K.M Loh and S. Rajesham. (1994). A Reverse Engineering Approach to Machine Components and its Appraisal, Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT ‘94). August 29 - 30. Johor Bahru: Faculty of Mechanical Engineering, 431 - 439.

64. Noordin M. Yusof and Mohd. Shariff Nabi Baksh. (1993). Trends in Modern Manufacture: The UTM Perspective, Seminar on CMM in Advanced Manufacturing and Quality Control, December 9, Shah Alam, Malaysia.

65. Noordin M. Yusof. (1993). The Use of CAD/CAM Systems in Manufacturing, CAD/CAM Seminar for SMI’s, September 16, KL, Malaysia.

66. Noordin M. Yusof and Safian Sharif. (1993). Trends in Modern Manufacture: Role of Faculty of Mechanical Engineering, Workshop on Productivity and Quality for SMI Companies, July 29, NPC, Johor, Malaysia.

67. Noordin M. Yusof. (1993). Trends in Modern Manufacture: Role of Faculty of Mechanical Engineering, Seminar on CMM and CAD/CAM Applications in Reverse Engineering, May 25, Universiti Teknologi Malaysia, Johor, Malaysia.

68. Noordin M. Yusof and Adnan Hassan (1993). Quality and Standardization. Science and Technology Malaysia, Ministry of Science, Technology and Environment and COSTAM, Vol 3 No:2, 25-29, November 1993.

69. Nooh Abu Bakar, S. Rajesham, Noordin Mohd. Yusof and Syed Azman Shah Syed Noordin. (1992). Trends in Modern Manufacture - The Role of Tertiary Technical Education, The 6th Science and Technology Congress, August 7 - 13, KL, Malaysia.

70. Nooh Abu Bakar and Noordin M. Yusof. (1992). Faculty of Mechanical Engineering Administration System, Muzakararah II FKJ, ITM Segamat Branch, Johor, Malaysia.

Book Chapter 1. Noordin Mohd.Yusof, Wan Emri Wan Abdul Rahaman, Hendriko, Denni Kurniawan,

Tool Life and Surface Roughness when Turning Hardened AISI D2 Tool Steel using Ceramic Cutting Tool with T-Land Cutting Edge, Advances in Manufacturing and Industrial Engineering, Penerbit Universiti Teknologi Malaysia (2008).

Book Translated

1. Che Abas Che Ismail, Izman Sudin, Noordin Mohd. Yusof, Safian Sharif and Yahaya Ramli, Reka Bentuk dan Pembuatan Bersepadu Komputer, Penerbit Universiti Teknologi Malaysia (2000).

Article

1. FMS (1995). Ensiklopedia Sains dan Teknologi.


13. Patent (Group inventor)

1. PI2008 0270 - Microwave Assisted Polymer Dissolution Apparatus for Membrane Production

2. PI 20081128 - Microwave Method of Synthesizing Polyethersulfone/Lithium Halide Membranes using 2 Solvent Systems

14. Editorial/Reviewer/Examiner Experience

Editor of Journal/Conference Proceedings

1. Previously an editorial board member of the International Journal of Precision Technology (IJPTech) published by Inderscience Publishers.

2. Previously an editorial board member of Jurnal Teknologi A published by Penerbit UTM.

3. M. Y. Noordin, T. Y. Liew, C. U. Heng, S. Balakrishnan, T. Jeevananthan, Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2008). January 26 - 27. SME-UTM S227 (2008).

4. M. Y. Noordin, Roslan Abd. Rahman et al., e-Proceedings of the 2nd Regional Conference on Engineering Education (RCEE 2007). 3-5 December 2007. Johor Bahru: Universiti Teknologi Malaysia (2007).

5. Noordin Mohd. Yusof, Helmi Zakaria, Ong Wee Vern and Quee Tah Chuan, Proceedings of the Conference on Manufacturing and Electronic Technology (COMET 2006). January 14 - 15. SME-UTM S227 (2006).

6. V. C. Venkatesh, Ahmad Faris Ismail, Awaluddin Mohd. Shaharoun, AKM Nurul Amin, Md. Mohafizul Haque, Noordin Mohd. Yusof, Safian Sharif, Shajahan Mridha, Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004). May 11 - 13. Research Centre IIUM (2004).

7. M. Y. Noordin and V. C. Venkatesh, Special Issue of the Journal of Materials Processing Technology, Vol. 116, Elsevier Science Publishers (2001).

8. V. C. Venkatesh and M. Y. Noordin, Special Issue of the International Journal for Manufacturing Science & Technology, Volume 2 No. 2, Advanced Manufacturing Solutions Co. Ltd. (2000).

9. V. C. Venkatesh, Noordin Mohd. Yusof, Safian Sharif, Sha’ri Mohd. Yusof and Md. Amirul Khair Salehun, Proceedings of the 2nd International Conference on Advanced Manufacturing Technology (ICAMT - 2000). August 29 - 30, Penerbit Universiti Teknologi Malaysia (2000).

10. Mohd. Ramzan Mainal, Md. Razali Ayob, Noordin Mohd. Yusof, Jamaludin Sheriff, Ali Ourdjini, Che Abas Che Ismail, Suhaimi Mansor and Wan Harun Wan Hamid, Jurnal Mekanikal, Fakulti Kejuruteraan Mekanikal (1995 - 1997).

11. V. C. Venkatesh, Noordin, M. Yusof, S. Rajesham and Safian Sharif, Special Issue of the Journal of Materials Processing Technology, Vol. 44, Elsevier Science Publishers (1994).


12. V. C. Venkatesh, Noordin Mohd. Yusof, S. Rajesham, Izman Sudin, Zainal Abidin Ahmad and Safian Sharif, Proceedings of the International Conference on Advanced Manufacturing Technology (ICAMT ‘94). August 29 - 30, Faculty of Mechanical Engineering (1994).

Evaluation of Paper/Article/Book

1. Quality Characteristics Improvement of Plastic Product by Optimising the Injection

Moulding Parameters Using Taguchi Method (2006). Jurnal Mekanikal, Universiti Teknologi Malaysia.

2. The Novel Bondless Wheel, Spherical Glass Chips and a New Method of Aspheric Generation (2006). Penilai (Pakar Bidang) Kertas Kerja Jurnal Peringkat Antarabangsa bagi Anugerah Penerbitan Universiti 2006.

3. Factors Affecting the Tool Life and Wear Mechanism of CBN Cutting Tool for Turning of Titanium Alloy (2006). Jurnal Kejuruteraan, Universiti Kebangsaan Malaysia

4. Quality Improvements Using Six Sigma Methodology (2006). Conference on Manufacturing and Electronic Technology (COMET 2006).

5. Optimization of Solder Paste Printing Parameters Using Design of Experiments (DOE) (2004). Jurnal Teknologi A, UTM.

6. Improved SPC Chart Pattern Recognition using Statistical Features (2004). Penilai Kertas Kerja Jurnal untuk Pencalonan Anugerah Penerbitan, FKM.

7. Pembuatan Tersepadu Komputer dari Konsep Menjadi Kenyataan (2004). Penilai Anugerah Buku Karya Terjemahan, UTM.

8. The Investigation of Tool Wear and Cutting Power in Turning Gray Cast Iron Using CBN and Ceramic Tools (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

9. Effect of Tool Corner Radius on Cutting Forces and Chip Geometry in Machining AISI 1045 Steel – FEM Study (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

10. Investigation of Tool Wear and Surface Roughness in Turning of Metal Matrix Composites (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

11. A Review of Quality Engineering Implementation in Malaysian Automotive Suppliers (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

12. A Survey on the Implementation of Quality Engineering Tools in Malaysia Manufacturing Industries (2004). 3rd International Conference on Advanced Manufacturing Technology (ICAMT-2004).

13. Keutuhan Permukaan Bahan Keluli Perkakas Setelah Pengisaran Hujung Menggunakan Perkakas Karbida Bersalut (2003). Jurnal Teknologi A, UTM.

14. Implementation of Computer Based Technologies for the Small and Medium Scale Industries of Malaysia (2003). Pertanika Journal of Science & Technology, UPM.

15. Performance of Carbide Tools in Green Milling of Ti-6242S (2003). Pertanika Journal of Science & Technology, UPM.


16. CAD/CAM of Headform for Helmet Testing (2003). Pertanika Journal of Science & Technology, UPM.

17. End Milling of Aerospace Material using Alloyed Uncoated Carbide under Green Machining (2002). Journal of Industrial Technology, SIRIM Bhd.

18. Mikrometer (1995). Ensiklopedia Sains dan Teknologi.

Evaluation of Courses (National Accredation Board, LAN)

1. Evaluation for the application of minimum standard approval together with course accreditation certification for the Diploma in Engineering Technology (Mould and Die Manufacturing) course (A 1461) proposed by Universiti Kuala Lumpur (2006).

2. Evaluation of the Diploma in Engineering Technology (Mould and Die Manufacturing) course (KA 5645) proposed by Universiti Kuala Lumpur (2004).

3. Evaluation of the conditions for approval for the running of the Foundation for Engineering and Industrial Technology course (KN 4483) by Kolej Universiti Teknologi Antarabangsa Twintech (International University College of Technology Twintech - IUCTT) (2004).

4. Evaluation of the Foundation for Engineering and Industrial Technology course (KN 4483) proposed by Kolej Universiti Teknologi Antarabangsa Twintech (International University College of Technology Twintech - IUCTT) (2003).

Internal Examiner 1. Ali Akhavan Farid. High Speed Drilling of Al-Si Alloy using Carbide Tools. PhD.

(2011)

2. Muchamad Oktaviandri. An Artificiat Intelligent-Based Decision Support Tool for Solving Dynamic Job Shop Scheduling Problem. PhD. (2011)

3. Tan Poh Lai, PhD. (2011)

4. Iwan Vanany, PhD. (2011)

5. Wong Yu Ching, M. Engg. (2010)

6. Norhayati Binti Mohmad Zakwan @ Zakuan. Structural Analysis of Total Quality Management, ISO/TS16949 and Organizational Performance in Malaysian and Thailand Automotive Industry. Ph D. (2009).

7. Elita Amrina. Manufacturing Performance Measurement Tool For Small and Medium-Sized Enterprises. M. Engg. (2009).

8. Siti Norezam Othman. Technology Transfer and Development of Firm Technological Capability among Automotive Component Manufacturers in Malaysia. Engg. D. (2006).

9. Parag Vichare. Partial Ductile Mode Grinding of Aspheric Surfaces on Glass Mould. M. Engg. (2006).

10. Lau Yew Loon. A Comparative Study of Several Production Control Strategies. M. Engg. (1999).


Additionally, have examined numerous M. Eng. - AMT initial and final project presentation as well as M. Eng. and Ph. D. initial project proposal.

External Examiner

1. Nor Khairusshima Muhamad Khairussaleh. Green Machining of Carbon Fiber Reinforced Plastic. Ph D. Universiti Kebangsaan Malaysia (2013)

2. Suresh Kumar a/l Somasundra. Statistical Approach in Solving Real Time lndustrial Problems for Initial and Eventual Bonding Interconnection. M. Eng. Universiti Teknikal Melaka (2011).

3. Ahmad Yasir bin Md Said. Kebolehmesinan Aloi Titanium Ti-6Al-4V Dalam Keadaan Lubrikasi Berkuantiti Minima (MQL). Ph D. Universiti Kebangsaan Malaysia (2010).

4. Siow Ping Chuan. Performance of Coated Carbide Tool in Low Speed Milling of Stainless Steel under Flood and Mist Lubrication. M. Eng. Universiti Malaysia Sabah (2010).

5. Yanuar Burhanuddin. Prestasi Mata Alat Nitrida Boron Polikiub (PCBN) Dalam Proses Pelarikan Aloi Titanium Ti-6Al-4V. Ph D. Universti Kebangsaan Malaysia. (2009).

6. Mariam Binti Abdul Aziz. Development of a Diagnostic Tool to Benchmark Best Manufacturing Practices in Malaysian SMEs. M. Sc. Universiti Putra Malaysia. (2007).

7. Nor Khairusshima Muhamad Khairussaleh. Chatter and Machinability Aspects in End Milling of Metal Matrix Composite (MMC) and Titanium Alloy − Ti − 64l −4V Using Carbide and PCD inserts. M. Sc. International Islamic University Malaysia (2007)

8. Tan Jit Yean. Development of Fuzzy Logic Model for Turning Process of Titanium Alloys. M. Sc. Universiti Putra Malaysia. (2004).

Examiner of Research Project

Internal examiner for evaluating RMK9 eScience proposals (2006, 2007).

Internal examiner for evaluating RMK9 technofund proposals (2006).

Internal examiner for evaluating IRPA RMK9 research project proposals (2006).

Internal examiner for evaluating the progress of IRPA RMK8 research projects (2004, 2005, 2006).

Internal examiner for evaluating FRGS research proposals (2007, 2008).

Internal examiner for evaluating the progress of FRGS research projects (2007, 2008).

15. Professional Development Courses/Modules Conducted

1. Data Gathering and Analysis module, Research Methodology course organized by SPS, UTM (2009).

2. Short Course on Network Analysis in Project Management organized by Society Of Manufacturing Engineers - SME S 227 (2009)


3. Sustainable Manufacturing and Product Design, Talk to FKKKSA Bioprocess Final Year Student (2009)

4. Halatuju Kerjaya Sains dan Teknologi, Talk organized by PPD Ledang/Muar (2008)

5. Techniques of Data Analysis (Basic Statistics), SLAB course (2006, 2007, 2008).

6. Research Design (Engineering) module, Research Methodology course organized by SPS, UTM (2006).

7. Short Course on Statistical Design of Experiments for the Department of Manufacturing and Industrial Engineering, KUiTHHO (2005)

8. Research Design (Engineering) module, Research Methodology course organized by SPS, UTM (2005).

9. Research Design (Engineering) module, Research Methodology course organized by KUITTHO (2004).

10. Quality Management module for Integrated Process Plant Management Scheme organized by CEPP and BATC at Tioxide (M) Sdn. Bhd. (1999).

11. Quality Improvement training program for Philips Electronics Supplies Sdn. Bhd. (1998).

12. Quality Management module for IMDS programme organized by BATC at LIKOM Malaysia (1998).

13. Statistical Process Control module, Training course for supervisors at Kenwood (M) Sdn. Bhd. (1997).

14. Short course on Statistical Quality Control for Hualon Corporation (M) Sdn. Bhd. (1997).

15. CNC Technology short course for Industrial Training Institute trainees (1997).

16. Short course on Project Planning Management & Control for Land and General Bhd. (1996).

17. Short course on Statistical Quality Control for Four Pillars - Beiersdorf Enterprise Sdn. Bhd. (1996).

18. Short course on Quality Improvement Tools for industrial participants (1996).

19. Industrial Engineering module for the Diploma in Manufacturing Management course conducted by Entrepreneurs Development Institute (EDI) in collaboration with Biro Inovasi dan Perundingan (BIP) UTM (1996).

20. CAD/CAM short course for PETERA and trainee from Pakistan (1994).

21. Statistical Process Control short course for UTM administrators (1993).

22. Statistical Process Control module, Short course on the Introduction of Operation Management for Small and Medium Sized Industries (1991).

Module tutor for Quality Management, Project Planning, Management & Control and Applied Statistical Methods modules for IMDS and IGDS programmes of BATC

16. Awards Received


Name of award Year

1. UTM Publication Award, Best Paper in National Journal 2008

2. Scholarship from Kennametal Inc. to attend the Comprehensive Application Engineering Course form July 24-28, 2006 2006

3. Excellence Service Award from Universiti Teknologi Malaysia 2004

4. UTM Publication Award, Best Paper in National Journal 2004

5. Invitation to attend the Asian Academy Seminar on Advanced Manufacturing System held at Hyderabad, India 2000

6. Excellence Service Award from Universiti Teknologi Malaysia 1994

7. Management Awareness Program from the Society of Manufacturing Engineers (USA) 1991

8. BICC - Cranfield Postgraduate Scholarship to pursue a 1 year course leading to the award of a M.Sc. in Advanced Manufacturing Technology at Cranfield Institute of Technology, United Kingdom 1988

9. A 3 year scholarship from Harris Semiconductor Malaysia Sdn. Bhd. whilst undergoing study at Universiti Teknologi Malaysia 1983

17. Community Services

1. Treasurer, Surau Al-Kauthar Management Committee, 2007 - Present

2. Treasurer, Surau Al-Kauthar Ad-hoc Management Committee, 2005 – 2007

3. Member, Surau Al-Kauthar Development Committee, 2003 – 2007

4. Faculty Advisor, Society of Manufacturing Engineers (S227) UTM Student Chapter since its inception in 1993.

5. Assistant Secretary, Academic Staff Association, 2004

6. Member, Sekolah Kebangsaan Taman Perling Parent Teacher Association, 2000 – 2010

7. Member, Sekolah Menengah Kebangsaan Seri Perling Parent Teacher Association, 2003 – 2004

8. Vice Chairman, Sekolah Menengah Kebangsaan Seri Perling Parent Teacher Association, 2004 – 2005

9. Member, Sekolah Agama Taman Perling 1 Parent Teacher Association, 2004 – 2011

Additionally, has held various positions in numerous committees at the community level.

curriculum vitae 1.web1.fkm.utm.my/userfiles/file/cv staf academic new... · machinability of...

Documents