bosch malaysia power tools 2011

Professional Blue Power Tools For Trade & IndustryRange for 2011/2012

Bosch Customer Care TeamTelephone 1 800 880 188

Competent answers to all your queries: The Bosch Customer Care Team answersall your queries concerning the use of power tools from Bosch – quickly and in acustomer-friendly manner.

More information about Bosch Power Tools

www.bosch-pt.com.my

Top quality

Robert Bosch Sdn Bhd(220975-V)

No. 8A Jalan 13/646200 Petaling JavaSelangor Darul Ehsan, Malaysia.

Tel: (603) 7966 3000Fax: (603) 7958 3838

www.bosch-pt.com.my

The protection of nature and workers‘ health as well as their safety has been part of Bosch group policy since 1973. Bosch

continuously develops technologies that are not only innovative but also environmental friendly. By introducing the first Lithium

Cordless tools, Bosch actively contribute to the protection of the Environment. Compared with NiCd batteries, Lithium-Ion

batteries contain around 70% fewer heavy metals and produce around 40% fewer CO2 emissions over a lifetime of ten years per

battery pack.

Country specific information:

Catalogue-Order No. 1619B002BA · Kittelberger

Subject to technical alterations · No liability is accepted for printing errors

bo_pt_pap_pdfgen.run Ver. 1.0.0.62 - Date/Time: 20.05.2011 11:02:58 - Page: 1/1

Professional blue power toolsfor professionals from professionals.

In 1886, Robert Bosch founded the "Workshop for Precision Mechanics and Electrical Engineering" in

Stuttgart. This was the birth of today's globally active company, Robert Bosch GmbH. From the very

beginning, the company's history has been characterized by innovative drive and social commitment.

125 years of excellence This year Bosch celebrates 125years of excellence in engineering.The company was built on anddriven by founder Robert Bosch’sprinciples, which were to develophigh-end technologies in a sociallyresponsible way. His vision iscontinued today and every toolbenefits from the experience of 125years of professional engineeringexcellence.

Innovating power tools to workquickly and efficientlyAs a consistent innovator, Bosch iscreating on average 3,780 patentsevery year, many of them developingnewer, faster and more efficientpower tools. An example of this isthe introduction of the Bosch mitresaw, the GCM 10M Professional,which was developed to meet thespecial need for multi-materialcutting, it is equipped with apowerful motor and best-in-classfeatures, allowing users to completetheir work with ease and precision.Main innovation also came in theform of the new cordless drivers,pushing the boundaries further inpower tools sector.

Quality and CompetencyBosch demands the higheststandards and requirements forquality. Each power tool is testedunder realistic working conditions toensure ease of use, safety andefficiency. The Bosch CordlessImpact Driver GDR 10,8-LIProfessional is just one example ofthis, it only weighs 0.96 kg with ahead length of 137mm, making itmore compact than previousgeneration and competitor models.The new impact driver delivers105Nm of torque and the highestspeed in its class to allow users tofinish their applications with easeand efficiency in the tightest space.This tool was awarded by the RedDot Design award for excellentdesign.


Professional Blue Power Tools for Trade & Industry | 1

2 | Professional Blue Power Tools for Trade & Industry

Content

6 New Tools

1

12 CordlessTools–Lithium-ionTechnology

14 CordlessTools–Lithium-ionTechnology16 Screwdrivers17 Cordless Drill/Drivers – Compact Duty18 Cordless Drill/Drivers – Basic Duty19 Cordless Impact Drills – Basic Duty20 Cordless Impact Drivers / Wrenches22 Cordless Rotary Hammers23 Other Cordless System Tools

26 CordlessTools–NickelTechnology28 Cordless Drill/Drivers – Basic Duty30 Cordless Impact Drivers / Wrenches31 Cordless Rotary Hammers

2

32 ImpactDrills,Drills,Screwdrivers

34 Impact Drills – 10 mm35 Impact Drills – 13 mm35 Impact Drills – 16 mm36 Impact Drills – 2 speed37 Drills – 6 mm37 Drills – 10 mm38 Drills – 13 mm39 Drills – 2 Speed40 Drills – 4 Speed40 Stirrers41 Depth Stop Screwdrivers

3

42 RotaryHammersandDemolitionHammers

44 Rotary Hammers with SDS-plus48 Dust Extraction Hammers with SDS-plus49 Rotary Hammers with SDS-max50 Demolition Hammer with SDS-plus50 Demolition Hammer with SDS-max52 Breakers


4

58 DiamondTechnology60 Marble Saws

5

62 AngleGrindersandMetalWorkingTools

64 Angle Grinders 500 W - 1500 W68 Polisher69 Angle Grinders 2000 W - 2600 W71 Cutting Grinder, Tapper, Straight Grinder, Bench

Grinder, Shears, Nibblers (Tappers)

6

74 Sanders,Planers&Routers76 Random Orbit Sanders77 Orbital Sanders78 Belt Sanders78 Routers79 Planers


8

88 Bench-mountedTools90 Sliding Mitre Saws91 Mitre Saws91 Combination Saw92 Metal Cut-off Grinder

9

94 DustExtractors,GlueGuns,HeatGuns

96 All Purpose Extractors96 Blower with Dust Extraction97 Glue Gun97 Heat Guns

7

80 Saws82 Jigsaws84 Foam Rubber Cutter85 Hand-held Circular Saws86 Sabre Saws


10

100 DigitalMeasuringTools102 Rotation Lasers103 Line Lasers104 Point Lasers105 Tile Laser105 Building Tripods107 Rangefinders109 Detectors110 Angle Measurers111 Digital Inclinometers111 Optical level112 Wall Mount113 Laser Receivers

114 OtherOverviews114 Tool Index


LeadershipinTechnologyandEngineeringThe Innovations from Bosch.

Bosch is committed to creating new, efficient solutions for professionals at work. Continual innovation and development combined with 125 years of experience and knowledge mean Bosch can deliver the latest in quality, highly effective power tools to assist highly skilled professionals in their day to day work.

New!CordlessScrewdriverIXO3Professional

Theworld'ssmallestscrewdriver-Nowperfectscrewdrivingateveryangle!Perfect for driving in tight spaces and hard-to-reach areas. Optional angle screw and torque setting adaptor: For even more applications. ▶ P. 16

New!CordlessDrill/DriverGSR1080-LIProfessional

PowerfulandreliabletoolBosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells. ▶ P. 18

New!CordlessDrill/DriverGSR1440-LIProfessional


New!CordlessImpactWrenchGDR1080-LIProfessional



New!CordlessImpactWrenchGDR1440-LIProfessional


New!ImpactDrillGSB500REProfessional

Powerful,compactandversatilekitsetformultipletasksPowerful motor with 500W input power for tough tasks. 100 pcs accessories in carrying case for versatile applications. Slim and improved design for ease of use. ▶ P. 34

New!RotaryHammerwithSDS-plusGBH2-23REProfessional

SpecialisttoolfordrillingrowsofholesRevolutionary new design and impact mechanism ensures faster drilling and robustness. Rotating brush plate for Forward/Reverse application. Overload clutch for user safety. ▶ P. 45

New!MarbleSawGDM13-34Professional

MorecuttingpowerwiththelongestlifetimeinclassPowerful 1300W marble saw for fast and precise cutting in marble/granite/tile/stone. Good dust insulation for maximum tool durability. Handy, lightweight 2.8 kg. ▶ P. 60


New!LineLaserGLL2Professional

ThemostcompactcrosslinelaserforprofessionalsSmall, lightweight, always within reach. Easy handling due to single-button operation. For flexible use: with multifunctional mount for versatile fixing possibilities. ▶ P. 103

New!DetectorGMS120Professional

Themostreliablemulti-detectorinitsclassMaximum reliability: all objects are found and application errors are avoided due to the automatic calibration. Reliable detection even of deep-lying objects – up to a depth of 12 cm. Even more reliable detection of objects due to three-colour LED luminous ring. ▶ P. 109

New!PolisherGPO12CEProfessional

ErgonomicandpowerfulforaneasybutyetbrilliantpolishPowerful motor with a 1250 W. Electronic variable speed control for optimum adaptation to all applications. Ergonomic main handle with soft grip for better and comfortable handling. ▶ P. 68

New!AngleGrinderGWS22-180Professional

LightandpowerfulPowerful 2200 W Champion motor for fast work progress. Low weight for optimal handling. Double-sealed ball bearing and the especially sturdy gearing guarantee a long lifetime. ▶ P. 70

Everything from a single source.

The innovative accessories from Bosch.Bosch offers a universal range comprising more than 8,000 products for every range of applications, all

target groups and all brands of power tools. Bosch is one of the top suppliers of saw blades, drill bits,

chisels and screwdriver bits – and is also the leading manufacturer of circular saw blades and

holesaws. In order to ensure quality and customer benefit, Bosch produces most accessories itself,

therefore providing the right accessories for all applications in outstanding product quality.

New!

New Aluminum Circular Saw Blade

50% longer blade life for lasting performance on aluminum.

► Fine carbide teeth produced in house. Clean cut, long life time► Face grinding. Clean cuts, less chip clogging and long blade life► Improved gullet design. Less chip clogging► Optimized teeth Geometry design. Less chip clogging and clean cut► Thin kerf. Easy cuts and material saving► Bosch quality Control Q100. Consistent product quality and product safety

New!

Quality for optimal performance

The new cutting and grinding discs from Bosch always giveexcellent work results.

► Vertical grinding. With a homogenous grit layer► Cast Iron. Grinding with the right mix► Inox. Grinding with rust prevention► Metal grinding with extra long life. Designed with higher hardness

to offer longer product life

New!

Diamond cutting discs

Taking performance and durability to the next level

► More work – less time. Offer fast working speed and high efficiencyand bring significantly improved product lifetime

► Built to last – even for the toughest jobs. 12mm segment heightoffers advantages for cutting life, performance and efficiency110mm and 114mm versions fit different power tool needs

► Easy cutting. In various construction materials: e.g. Brick, concrete,marble, granite

New!

Speed for metal JSB

Steel has met its match – The world’s fastest jigsaw blade

► Speed-optimized Back Taper Design (patent pending). Increases cutting speed dueto a pendelum movement simulation

► Bi-Metal Design provides superior longevity. 300 % life compared to HSS► Thin Kerf. Increases cutting► Patented Tooth Geometry. Provides unmatched cutting speed in metal



Cordless Tools – Lithium-ion Technology Professional power in everyvoltage class.

Cordless tools with Bosch lithium-ion technology set new

standards in power and reliability. These tools impress with

their particularly long battery runtime, optimum weight and

extreme robustness. Bosch is the first manufacturer to offer

a comprehensive product system with lithium-ion technology

in every voltage class.

The Bosch Lithium-ion cordless classes:

► 3.6 Volt:World's smallest professional cordless screwdrivers.

► 10.8 Volt:Try these for size.

► 14.4 Volt and 18 Volt:The long-distance runners.

► 36 Volt:As powerful as corded.



Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

1

Bosch HCH (Heat Conductive Housing)*:Ensures quick dissipation of heat within battery

Controls heat and cooling during charges

Optimizes thermal balancing within the battery pack

Bosch Premium Lithium-Ion TechnologyPower – Performance – Lifetime – Speed

Power

Pound for pound - Li-Ion is the most powerful batteryThanks to the higher energy density, Li-Ion batteries weigh up to 40% less than conventional NiCd/NiMHalternatives of the same size.

Medium weight

NiMH

Light weight

Li-Ion

Heavy weight

NiCd

No memory effectBatteries can be charged withoutcell damage regardless of theircharging state.

No loss of powerDelivers full battery power fromthe first to last screw or hole.

Minimal self-dischargeIf fully charged, batteries will workeven if not used for months!

Performance

Loss of 30%of the capacity*

1 year

Irregular charging

No Loss

1 year

Irregular charging

Reduced workdowntime andlower costs!

Increasedproductivity withhigher efficiency!

The flexibilityto start work

anytime!

Li-Ion Li-Ion

NiCd

6 months

6 monthsNiCd

Li-Ion

NiCd

Li-Ion

NiCd

* Depends on the working condition

Tool voltage

100%

50%

100% 50% 0%

Batterycapacity

NiCd

BoschLi-Ion

Reduced work downtime and higher productivity!

Speed

Bosch Hyper-charge technologyAchieves 75% battery capacity in 50% of the charging time

Protects against battery overcharge and lengthens battery lifetime

Li-Ion75%

(in 15 mins)

* based on 30-minute charger

Lifetime

Significantly reduces battery costs as Bosch Li-Ion battery packs last 4 times longer than competitors’ alternatives.

Bosch high-performance battery packsSpecially developed cells with very low internal resistance and high current-capable design ensure low energy losses during charging and operation.

Bosch ECP (Electronic Cell Protection)Prevents battery cells against :

• Deep discharges : Reduces current flow if voltage level is at its end

• Overheating : Decreases current flow if the tool or battery is too hot

• Overloads : Reduces current flow if the current draw is too high

Guarantees optimal tool and battery performance in the toughest conditions

Prolonged lifetime reduces maintenance and replacement costs!* Applicable for all 14,4, 18 and 36 Volt Bosch Li-Ion battery packs

Lighter in weight, easier to carry for fatigue - free working!


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

1


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

3.6V 0.3kg

CordlessScrewdriver IXO3ProfessionalTheworldʼssmallestscrewdriver–Nowperfectscrewdrivingateveryangle!

▶ Perfect for driving in tight spaces and hard-to-reach areas ▶ Optional angle screw and torque setting adaptor: For even more applications

Otherfeatures ▶ Magnetic bit holder ▶ Integrated LED light for illuminating the work area, even in dark places ▶ Soft rubber grip

Technical dataOrder number 0 601 960 ...Torque, max. (hard screwdriving applications) 4 Nm

No-load speed 0 - 180 rpm

Max. screw diameter 5 mm

Scope of supply ... 2L0Charger (SP no. 2 607 225 419) ✔

Hex drill bit ✔

Screw driver bit set ✔

Universal holder ✔

New!

1

3.6V 0.5kg

CordlessScrewdriver GSRProDriveProfessionalWorld’ssmallestprofessionalcordlessscrewdriver

▶ Extremely small and handy – fits in any trouser pocket ▶ Powerful: 110 screws (3.5 x 30 mm in softwood) with only one battery charge

▶ Continuous work due to changeable battery and quick charger

Otherfeatures ▶ Unique Bosch Premium lithium-ion technology for 400% longer lifetime and unbeatable battery runtime

▶ Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge

▶ Motor brake for precise work when driving rows of screws

Technical dataOrder number 0 601 9A2 ...Torque, max. (hard screwdriving applications) 7 Nm



Scope of supply ... 0L1Charger AL 1115 CV (SP no. 2 607 225 516) ✔

Hex drill bit ✔

Holster ✔

Screw driver bit set ✔

Soft Bag ✔

Universal holder ✔

1 x 1.3 Ah Li-Ion battery ✔


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

10.8V 0.95kg

CordlessDrill/Driver GSR10,8-2-LIProfessionalTheshortestandmostpowerfulinitsclass

▶ Short head length only 179mm – better balance and control of the tool for perfect working in tight areas

▶ Light weight 0.95kg for low-fatigue and convenient working ▶ 2-speed gearbox optimized torque for screw driving and speed for drilling



▶ 10mm Auto-lock chuck to cater many types of accessories without an adaptor


No-load speed (1st gear/2nd gear) 0 - 350 / 1300 rpm


Max. drilling diameter in wood 19 mm

Max. drilling diameter in steel 10 mm

Torque settings 20+1

Chuck clamping range 1 - 10 mm

Scope of supply ... 1L0Carrying case ✔

Charger AL 1130 CV (2 607 225 136) ✔

1 screwdriver bit ✔

2 x 1.3 Ah Li-Ion batteries (2 607 336 014) ✔

1

10.8V 1.1kg

CordlessAngleDriver GWI10,8V-LIProfessionalThemostcompactlithium-ioncordlessangledriver

▶ Extremely versatile, above all in tight spaces and hard-to-reach areas, thanks to the 5 head position settings: 0°/22.5°/45°/67.5°/90°

▶ Very compact: 9.5 cm adjustable head, the smallest on the market ▶ 7-stage electronic torque setting + drill setting



▶ Motor brake for precise work when driving rows of screws

Technical dataOrder number 0 601 360 ...No-load speed 0 - 585 rpm




Toolholder 1/4˝ internal hexagon

Scope of supply ... UB0Carrying bag ✔

Charger AL 1130 CV (SP no. 2 607 225 146) ✔



Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

10.8V 1.25kg

CordlessDrill/Driver GSR1080-LIProfessionalPowerfulandreliabletool


▶ No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells

Otherfeatures ▶ 10.8 Volt lithium-ion drill/driver ▶ Interchangeability between 10.8 Volt and 14.4 Volt battery packs








Charger AL1814 CV ✔

Screwdriver bit ✔


New!

1

14.4V 1.3kg

CordlessDrill/Driver GSR1440-LIProfessionalPowerfulandreliabletool











Charger AL1814 CV ✔



New!


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

14.4V 1.3kg

CordlessDrill/Driver GSR14,4-2-LIProfessionalSmallinsize.Greatinpower.

▶ Slimmest grip circumference 126 mm with soft rubber for fatigue less work ▶ Compact – Short head length 196 mm allows working in confined spaces possible

▶ Light weight – weight just 1.3 Kg makes drilling overhead effortless

Otherfeatures ▶ No memory effect and no self-discharge thanks to lithium-ion technology ▶ Full power of the battery up to the last screw ▶ ECP: Electronic Cell Protection thanks to overload, overheating and total-discharge protection

▶ Integrated LED for lighting up work areas ▶ Softgrip for best handling and convenient working ▶ Forward / reverse rotation







Scope of supply ... 4L0Carrying case (2 605 438 667) ✔

Charger AL 1820 CV (2 607 225 425) ✔

Keyless chuck (2 608 572 257) ✔


1

14.4V 1.4kg

CordlessImpactDrill GSB14,4-2-LIProfessionalCompactdrillingpower–thelightestdrillsintheirclass

▶ Lightest weight in class for fatigue free drilling ▶ Perfect handling due to compact design ▶ Able to complete a wide range of applications including impact drilling in masonry


▶ Integrated LED for lighting up work areas ▶ Softgrip for best handling and convenient working ▶ Forward / reverse rotation





Charger AL 1820 CV (2 607 225 425) ✔

Keyless chuck (2 608 572 257) ✔



Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

18V 1.5kg

CordlessImpactDrill GSB18-2-LIProfessionalCompactdrillingpower–Thelightestimpactdrilldriversintheirclass

▶ Lightest weight in class for fatigue free drilling ▶ Perfect handling due to compact design ▶ Able to complete a wide range of applications including impact drilling in masonry


▶ Integrated LED for lighting up work areas





Charger AL 1820 CV (2 607 225 425) ✔

Keyless chuck (2 608 572 257) ✔


1

10.8V 0.96kg

CordlessImpactDriver GDR10,8-LIProfessionalThemostcompactImpactDriverwithprofessionalperformance

▶ High torque 105Nm with pocket size body that can cover 80% of conventional size of cordless impact driver applications

▶ Shortest head length in its class (only 137mm) and only 0.96kg weight for easy handiling

▶ Highest speed in its class for outstanding work progress



▶ Integrated luminous ring with 3 LEDs for lighting up the work area, even in dark places



Rated impact rate 0 - 3100 bpm

Screw diameter M4-M12



Charger AL 1130 CV (2 607 225 136) ✔

Wrist strap ✔


1 x 1.3 Ah Li-Ion battery (2 607 336 014) ✔


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

10.8V 1.1kg

CordlessImpactWrench GDR1080-LIProfessionalPowerfulandreliabletool




Technical dataOrder number 0 601 9B3 ...Torque, max. (hard screwdriving applications) 100 Nm



Screw diameter M6 - M14



Charger AL1814 CV (2 607 225 742) ✔



New!

1

14.4V 1.2kg

CordlessImpactWrench GDR1440-LIProfessionalPowerfulandreliabletool




Technical dataOrder number 0 601 9B3 ...Torque, max. (hard screwdriving applications) 130 Nm



Screw diameter M4 - M14



Charger AL1814 CV (2 607 225 742) ✔



New!


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

36V 2.9kg

CordlessRotaryHammer GBH36V-LICompactProfessionalUnbeatablylight–Aspowerfulascorded

▶ As powerful as corded: up to 100 drilled holes (6 x 40 mm in concrete) with one battery charge, ideal for indoor use

▶ With a weight of only 2.9 kg, it is ideally suitable for overhead work ▶ Bosch Vibration Control for fatigue-free working



▶ Pneumatic hammer mechanism, optimised for drilling holes of 4 – 10 mm in concrete (max. 18 mm)

Technical dataOrder number 0 611 903 ...Rated power input 430 W

Impact energy 0 - 1.7 J

Rated speed 0 - 1500 rpm

Impact rate at rated speed 0 - 4850 bpm

Drilling dia. concrete, hammer drill bits 4 - 18 mm



Scope of supply ... R71Auxiliary handle ✔

Carrying case (2 605 438 668) ✔

Charger AL 3640 CV (2 607 225 102) ✔

Depth stop 210 mm (2 603 001 019) ✔


1

36V 4.3kg

CordlessRotaryHammer GBH36V-LIProfessionalAspowerfulascorded

▶ As powerful as corded: up to 195 drilled holes (6 x 40 mm in concrete) with only one battery charge, ideal for outdoor use

▶ Pneumatic hammer mechanism with chisel function, optimised for drilling holes of 8 – 16 mm in concrete (max. 26 mm)

▶ As fast as the best 2kg mains-powered hammer due to high impact energy (3 joules)


Impact energy 0 - 3 J






Scope of supply ... R02 ... R72Auxiliary handle (2 602 025 141) ✔ ✔

Carrying case (2 605 438 179) ✔ ✔

Charger AL 3640 CV (2 607 225 100) ✔ –

Charger AL 3640 CV (2 607 225 102) – ✔

Depth stop 210 mm (1 613 001 010) ✔ ✔

2 x 2.0 Ah Li-Ion batteries (2 607 336 018) ✔ –

2 x 2.6 Ah Li-Ion batteries (2 607 336 108) – ✔


Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

10.8V 1.0kg

CordlessMulti-Cutter GOP10,8V-LIProfessionalPerfecttrimming,adjusting,repairing

▶ Wide range of applications such as plunge cuts, flush cuts and sanding due to comprehensive range of accessories

▶ Excellent handling due to compact design and weight of only 1.0 kg ▶ Up to 20,000 oscillations per minute for the same professional performance as comparable mains-powered tools



Oscillation angle on left/right 1.4 °

Scope of supply ... 0L0Allen key ✔

Carrying case ✔

Charger AL 1130 CV ✔

Delta sanding plate ✔

Sanding paper set ✔

1 BIM segment sawblade ✔

1 HCS plungecut sawblade ✔

1 HM-RIFF segment blade ✔

1 x 1.3 Ah Li-Ion battery (2 607 336 014) ✔

2 BiM plungecut sawblades ✔

1

Range of applications for all cordless screwdrivers andcordless rotary hammers at a glance

Bosch Premium lithium-ion technology

Basic duty chart

Nickel-(Cd/MH) technology

Drill/Drivers / Screwdrivers / Angle Drivers

Weightincl.battery(kg)

Screw dia. in wood (mm) Drilling dia. in wood (mm) Drilling dia. inmasonry (mm)

Drilling dia.in steel (mm)

Sup

er c

omp

act

dut

y

GSR 10,8-2-LIProfessional 1.0 10

GWI 10,8 V-LIProfessional 1.1 8

Bas

ic D

uty


GSR 1080-LIProfessional 1.3 -


Hammer Drill/Drivers

Bas

ic D

uty GSB 14,4-2-LI

Professional 1.4 10

GSB 18-2-LIProfessional 1.5 10

Rotary Hammers


Drilling dia. in concrete(mm)

Drilling dia. in wood (mm) Drilling dia. inmetal (mm)

Drilling dia.in masonry(mm)

Sup

er D

uty GBH 36 V-LI

Professional 4.3 68

GBH 36 V-LICompactProfessional

2.9 68

Drill/Drivers / Screwdrivers




Bas

ic D

uty

GSR 9,6-2Professional 1.5 10

GSR 12-2Professional 1.6 12


Rotary Hammers





Rot

ary

Ham

mer

s

GBH 24 VProfessional 3.8 68

Optimum use Maximum range of application



Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

1

Range of applications for all cordless screwdrivers andcordless rotary hammers at a glance

Bosch Premium lithium-ion technology

Basic duty chart

Nickel-(Cd/MH) technology

Drill/Drivers / Screwdrivers / Angle Drivers




Sup

er c

omp

act

dut

y


GWI 10,8 V-LIProfessional 1.1 8

Bas

ic D

uty




Hammer Drill/Drivers

Bas

ic D

uty GSB 14,4-2-LI

Professional 1.4 10

GSB 18-2-LIProfessional 1.5 10

Rotary Hammers





Sup

er D

uty GBH 36 V-LI

Professional 4.3 68

GBH 36 V-LICompactProfessional

2.9 68

Drill/Drivers / Screwdrivers




Bas

ic D

uty


GSR 12-2Professional 1.6 12


Rotary Hammers





Rot

ary

Ham

mer

s

GBH 24 VProfessional 3.8 68

Optimum use Maximum range of application



Cor

dles

sTo

ols

–Li

thiu

m-io

nTe

chno

logy

1

Cordless Tools – Nickel Technology Bosch Intelligent Nickel O-PackBattery Technology.

Bosch battery packs are high-performance, intelligent,

robust and extremely easy to handle.

► High performance:The type of screw/drilling diameters or plank thicknesses that canbe processed depends on the battery voltage. The number ofscrews, holes or sawn metres that can be achieved with onebattery charge depends on the battery capacity (Ah). The high-quality materials and cells used by Bosch, combined with manyyears of experience in battery technology, guarantee powerfulworking, a long runtime and a long battery pack service life.

► Intelligent:In addition to the power contacts (+/–), Bosch battery packs alsohave an NTC and coding contact. Both contacts guarantee fastand life-prolonging charging of the battery packs. The NTCcontact ensures a charge ideally tuned to the state of the battery.The coding contact is used for identifi cation of the battery pack.The patented APT insertion end prevents incorrect insertion andensures 100% full charge.

► Robust:The cells used in Bosch battery packs guarantee a long servicelife. Intensive laboratory and test series ensure the quality androbustness of the battery packs.

► Comfortable: The patented locking system and ergonomic shape of Boschbattery packs ensures easy insertion and removal as well as afirm hold, even with strong vibrations.



Cor

dles

sTo

ols

–N

icke

lTec

hnol

ogy

1


Cor

dles

sTo

ols

–N

icke

lTec

hnol

ogy

7.2V 1.4kg

CordlessDrill/Driver GSR7,2-2ProfessionalCompacttoolforuniversaluse

▶ Ideal power transfer by 2-speed gearbox ▶ 25 torque settings + drill setting ▶ Excellent handling due to the compact size

Otherfeatures ▶ Softgrip for best handling and convenient working ▶ Forward/reverse rotation






Scope of supply ... NL0Carrying case ✔

Charger AL 1411 DV (SP no. 2 607 224 393) ✔

2 x 2.0 Ah NiCd battery (2 607 335 175) ✔

1

9.6V 1.5kg








Scope of supply ... LL0Carrying case ✔


2 x 1.5 Ah NiCd batteries ✔


Cor

dles

sTo

ols

–N

icke

lTec

hnol

ogy

12V 1.6kg

CordlessDrill/Driver GSR12-2ProfessionalCompacttoolforuniversaluse







Scope of supply ... JL0Carrying case ✔



1

14.4V 1.7kg








Scope of supply ... GL0Carrying case ✔




Cor

dles

sTo

ols

–N

icke

lTec

hnol

ogy

12V 1.8kg

CordlessImpactDriver GDR12VProfessionalThesmallpowerpackfortoughjobs

▶ Top performance: high torque and high impact force ensure optimum performance when driving screws into metal and wood

▶ High level of convenience: compact and ergonomic shape for fatigue-free working

Otherfeatures ▶ Gear housing made of metal for maximum precision and long lifetime ▶ Safe working without recoil



Rated impact rate 3200 bpm

Screw diameter M 6 – M 14


Scope of supply ... 504 ... 506Belt clip (2 601 398 022) ✔ ✔

Carrying case (2 605 438 162) ✔ ✔

Charger AL 2425 DV – ✔

Charger AL 2425 DV (2 607 224 426) ✔ –

Hand strap ✔ ✔

Rubber ring (2 600 209 024) ✔ ✔

1 screwdriver bit ✔ ✔

2 x 2.0 Ah NiCd batteries ✔ ✔

1

12V 1.8kg

CordlessImpactWrench GDS12VProfessionalThesmallpowerpackfortoughjobs

▶ Top performance: high torque and high impact force ensure optimum performance when driving screws into metal and wood

▶ High level of convenience: compact and ergonomic shape for fatigue-free working

Otherfeatures ▶ Gear housing made of metal for maximum precision and long lifetime ▶ Safe working without recoil ▶ 3-fold adjustable light ensures optimum visibility, even in dark areas



Rated impact rate 3200 bpm

Screw diameter M 6 – M 14

Toolholder 1/2˝ external square

Scope of supply ... K71Belt clip (2 601 398 022) ✔

Carrying case (2 605 438 162) ✔

Charger AL 1450 DV (2 607 224 704) ✔

Hand strap ✔

Rubber ring (2 600 209 024) ✔

2 x 2.6 Ah NiMH batteries (2 607 335 684) ✔


Cor

dles

sTo

ols

–N

icke

lTec

hnol

ogy

24V 3.8kg

CordlessRotaryHammer GBH24VProfessionalHandyandcompact

▶ Low weight and compact design for convenient working ▶ SDS-plus system for fast drill bit changing ▶ More than 120 holes in concrete 6x40 mm with one battery charge

Otherfeatures ▶ Optimised hammer mechanism and special Bosch high-performance motor for the hardest applications

▶ Electric motor brake ▶ Forward/reverse operation sliding switch with lock-on switch ▶ With chisel attachment MV 200 also suitable for chiselling


Impact energy 0 - 1.3 J






Scope of supply ... 252Auxiliary handle (2 602 025 120) ✔

Carrying case (2 605 438 358) ✔

Charger AL 2450 DV (2 607 225 030) ✔

Depth stop 210 mm (1 613 001 010) ✔

2 x 2.4 Ah NiCd batteries (2 607 335 448) ✔

1

Impact Drills, Drills, Screwdrivers Uncompromising power andversatility.

The professional drills, impact drills and screwdrivers from

Bosch are developed for professional users who have

extremely high requirements with regard to power, lifetime

and versatility. Whether it be impact drilling, drilling,

screwdriving or stirring: the impact drills for trade and

industry leave nothing to be desired. Bosch offers the right

drill and the right screwdriver for all professional drilling and

screwdriving applications.

Built to perform, built to last: The quality of the Bosch drill GBM 10 REProfessional is simply undisputed. The full ball bearing construction and the robustdesign give it best in class lifetime.

Benchmark in one-speed impact drills: The GSB 10/13/16 Professional offer themost compact and complete range with power and performance.



Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

2


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

500W 1.5kg

ImpactDrill GSB500REProfessionalPowerful,compactandversatilekitsetformultipletasks

▶ Powerful motor with 500 W input power for tough tasks ▶ 100 pcs accessories in carrying case for versatile applications ▶ Slim and improved design for ease of use

Otherfeatures ▶ Full ball bearing construction for durability ▶ Easy switch between impact and drilling mode ▶ Forward/reverse rotation for screwdriving applications

Technical dataOrder number 0 601 1A0 ...No-load speed 0 - 2600 rpm

Impact rate at no-load speed 0 - 41600 bpm

Drilling dia. in concrete 10 mm

Drilling dia. in steel 8 mm

Drilling dia. in wood 20 mm

Chuck capacity 1.5 - 10 mm


Chuck Key ✔

Keyed chuck fitted, 10 mm ✔

100 pcs accessory set ✔

New!

2

500W 1.5kg

ImpactDrill GSB10REProfessionalCompactpower–Themostcompactandpowerfulimpactdrillinitsclass

▶ Robust and powerful 500 W motor ▶ Extremely compact for working in tight spaces and overhead ▶ Low weight of only 1.5 kg for fatigue-free working

Otherfeatures ▶ Forward/reverse rotation ▶ Electronic control for exact pilot drilling ▶ Rotating brush plate for constant power in reverse and forward rotation ▶ Higher dynamic load rated ball bearing for long life ▶ Ergonomic handle for comfortable use






Chuck capacity 1 - 10 mm

Scope of supply ... 1L0 ... 1L2Carrying case (2 605 438 607) ✔ ✔

Keyed chuck 10 mm (2 608 571 078) ✔ ✔

100 pcs accessory set ✔ –

276 mm

180 mm


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

600W 1.7kg


▶ Robust and powerful 600 W motor ▶ Extremely handy: no bigger than a glove and 1.7 kg light ▶ Soft in line grip for a secure hold

Otherfeatures ▶ Speed trigger with electronic control for exact pilot drilling ▶ Rotating brush plate for constant power in reverse and forward rotation ▶ Higher dynamic load rated ball bearing for long life ▶ Auxiliary handle with depth stop for better control







Scope of supply ... 1L0Auxiliary handle (1 612 025 024) ✔

Depth stop 210 mm (1 613 001 010) ✔

Keyed chuck 13 mm (2 608 571 079) ✔

2

701W 1.9kg


▶ Robust and powerful 701 W motor for tough applications ▶ Soft in line grip for a secure hold ▶ Higher dynamic load rated ball bearing for long life

Otherfeatures ▶ Speed trigger with electronic control for exact pilot drilling ▶ Speed preselection with setting wheel ▶ Rotating brush plate for constant power in reverse and forward rotation ▶ Auxiliary handle with depth stop for better control

Technical dataOrder number 0 601 218 ...No-load speed 3000 rpm

Impact rate at no-load speed 48000 bpm






Carrying case (2 605 438 607) ✔

Depth stop 210 mm (1 613 001 010) ✔

Keyed chuck 13 mm (2 608 571 079) ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

701W 2.1kg

ImpactDrill GSB20-2ProfessionalThereliabletoolforimpactdrilling

▶ Ergonomic handle for easy handling and best work results ▶ Selector switch for drilling/impact drilling ▶ Impact-resistant keyed chuck

Otherfeatures ▶ 2-speed impact drill with synchronised gears for wide range of applications ▶ Auxiliary handle with depth stop

Technical dataOrder number 0 601 184 ...No-load speed 1000 / 3000 rpm

Impact rate at no-load speed 16000 / 48000 bpm

Drilling dia. in concrete 20 / 13 mm

Drilling dia. in steel 13 / 8 mm

Drilling dia. in wood 40 / 25 mm



Depth stop 210 mm (1 613 001 010) ✔

Keyed chuck 13 mm (2 608 571 068) ✔

2

701W 2.2kg

ImpactDrill GSB20-2REProfessionalThereliabletoolwithelectronicsforsensitivedrilling

▶ Ergonomic handle for easy handling and best work results ▶ Selector switch for drilling/impact drilling ▶ Impact-resistant keyed chuck

Otherfeatures ▶ 2-speed impact drill with synchronised gears for wide range of applications ▶ Electronic control for exact pilot drilling ▶ Speed preselection with setting wheel ▶ Forward/reverse rotation ▶ Auxiliary handle with depth stop

Technical dataOrder number 0 601 184 ...No-load speed 0 - 1000 / 3000 rpm

Impact rate at no-load speed 0 - 16000 / 48000 bpm

Drilling dia. in concrete 20 / 13 mm





Depth stop 210 mm (1 613 001 010) ✔

Keyed chuck 13 mm (2 608 571 068) ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

350W 1.1kg

RotaryDrill GBM6REProfessionalCompact,preciseandpowerful–Thequalitiesofachampion

▶ Powerful 350 W motor for tough applications ▶ 4000 rpm no-load speed for accurate drilling of small diameters ▶ All ball bearing construction for long lifetime

Otherfeatures ▶ High strength & precision sintered bearing bracket for precision working ▶ Compact & high strength helical gear for long lifetime ▶ Ergonomic grip for fatigue-free drilling ▶ Practical belt clip for easy handling ▶ Rotatable brush plate for same power in forward and reverse direction ▶ Ergonomic switch with electronic speed control


Chuck capacity 0.5 - 6.5 mm

Drilling dia. in steel 6.5 mm

Drilling dia. in aluminium 6 mm


Drill spindle connecting thread 3/8˝ – 24 UNF

Scope of supply ... 5L0Keyed chuck (2 608 571 048) ✔

2

450W 1.3kg

RotaryDrill GBM10REProfessionalRobustness&stayingpower–Thequalitiesofachampion

▶ Powerful 450 W motor for tough applications ▶ All ball bearing construction for long lifetime ▶ High strength & precision sintered bearing bracket for precision working

Otherfeatures ▶ Rotatable brush plate for same power in forward and reverse direction ▶ Ergonomic switch with electronic speed control ▶ Compact & high strength helical gear for long lifetime ▶ Spindle collar diameter of 43 mm – Can be used in drill stands ▶ Ergonomic softgrip for fatigue-free drilling ▶ Practical belt clip for easy handling







Scope of supply ... 5L0Keyed chuck 10 mm (2 608 571 078) ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

550W 2.1kg

RotaryDrill GBM13HREProfessionalThesturdypowerpack

▶ Highest quality and durability due to cut gears, ball and needle bearings, as well as robust metal gear housing

▶ Masters simply everything due to the triple reduction gears and the highest torque in its class (60 Nm)

▶ With the appropriate accessories, even the largest hole diameters, working with holesaws up to 80 mm or stirring thick liquids are no problem

Otherfeatures ▶ Control Electronic for exact pilot drilling ▶ Safe grip with sturdy, long auxiliary handle ▶ Easy operation with 2-finger pressure switch ▶ Forward/reverse rotation







Keyed chuck 13 mm (1 608 571 062) ✔

2

600W 1.65kg

RotaryDrill GBM13REProfessionalPowerandperformance–Thequalitiesofachampion

▶ Powerful 600 W motor for tough applications ▶ All ball bearing construction for long lifetime ▶ High strength & precision sintered bearing bracket for precision working

Otherfeatures ▶ Compact & high strength helical gear for long lifetime ▶ Spindle collar diameter of 43 mm – Can be used in drill stands ▶ Ergonomic softgrip for fatigue-free drilling ▶ Practical belt clip for easy handling ▶ Rotatable brush plate for same power in forward and reverse direction ▶ Ergonomic switch with electronic speed control






Drill spindle connecting thread 1/2˝- 20UNF

Scope of supply ... 5L0Keyed chuck 13 mm (2 608 571 079) ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

550W 1.9kg

RotaryDrill GBM13-2ProfessionalThepowerfultoolwith2gearsfordemandingwork

▶ Powerful motor for drilling up to 13 mm diameter in steel ▶ 2-speed gearbox: for demanding work ▶ Fully ball and roller bearing-mounted for long lifetime and precise working

Otherfeatures ▶ Drill chuck secured by centring screw against coming loose in reverse rotation

▶ Synchronised 2-speed draw key transmission: switchover possible during operation

▶ Drill spindle with hexagon socket for direct insertion of screwdriver bits ▶ Spindle collar diameter of 43 mm (European standard) – can be used in drill stands




Drilling dia. in aluminium 20 / 12 mm



Scope of supply ... 006 ... 037Auxiliary handle (1 612 025 024) ✔ ✔

Depth stop 210 mm (2 603 001 019) ✔ ✔

Keyed chuck (1 608 571 063) ✔ ✔

2

1050W 3.7kg

RotaryDrill GBM16-2REProfessionalTheperfecttoolforformworkdrilling

▶ With spade handle for a firm grip ▶ Control Electronic for exact pilot drilling ▶ Forward/reverse rotation specially for loosening jammed formwork drill bits

Otherfeatures ▶ Also suitable for stirring ▶ Synchronised 2-speed draw key transmission; switchover possible during operation

▶ Spindle collar diameter of 43 mm (European standard) – can be used in drill stands

▶ Switch operated and locked with one finger ▶ Long lifetime with roller bearing-mounted motor and gears




Drilling dia. in aluminium 20 / 13 mm


Drill spindle connecting thread Cone B 16

Scope of supply ... 542Auxiliary handle (SP no. 3 602 025 021) ✔

Depth stop 310 mm (1 613 001 003) ✔

Keyed chuck 16 mm (2 608 571 020) ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

1500W 7.3kg

RotaryDrill GBM32-4ProfessionalThemostpowerfulmodelwith1500watts

▶ Most powerful Bosch Drill with 1500 watts for drilling diameters up to 32 mm and heavy-duty use in steel

▶ Ideal for core drilling in steel construction with Magnetic Drill Stand GMB 32 Professional

▶ 4-speed gearbox for optimum power transfer

Otherfeatures ▶ Auxiliary handle for better grip ▶ Safety thanks to overload clutch ▶ Long lifetime with roller bearing-mounted motor and gears ▶ Switch operated and locked with one finger

Technical dataOrder number 0 601 130 ...No-load speed 210 / 330 / 470 / 740 rpm




Drill spindle connecting thread MK 3 – DIN 228

Scope of supply ... 242Auxiliary handle (SP no. 3 602 025 018) ✔

Carrying case ✔

Drift (1 601 030 009) ✔

2

1150W 4.2kg

Stirrer GRW11EProfessionalThesturdytoolforstirring

▶ Synchronised 2-speed gearing for stirring paint, varnish, glue, mortar and lots more

▶ Optimum adaptation of the speed to the material that is to be stirred ▶ High reserves of power with 1150 watts power input

Otherfeatures ▶ Universal toolholder 5/8˝ – Use of commercially available stirrer baskets up to 200 mm diameter

▶ With drill chuck, can also be used as a drill ▶ Electronic Control means especially gentle plunging into the material to be stirred – no more splashes

Technical dataOrder number 0 601 940 ...Rated speed 0 - 280 / 640 rpm

Toolholder 5/8˝ – 16 UNF

Max. torque 105.0 / 50.0 Nm

Scope of supply ... 742Adapter 215 mm (3 609 201 037) ✔

Auxiliary handle (1 612 025 020) ✔

Stirrer basket 445 mm, diameter 140 mm ✔


Impa

ctD

rills

,Dri

lls,S

crew

driv

ers

701W 1.4kg

DepthStopScrewdriver GSR6-45TEProfessionalThefastandhandyprofessionaltoolfordrywallconstruction

▶ Fast work progress when fitting plasterboard and softwood due to optimum coordination of speed and torque in the 701-watt high-performance motor

▶ Precise driving of rows of screws at a constant depth due to the depth stop that is easy to operate with one hand and the exact cut-off clutch

▶ Compact design, comfortable grip and wide ‘accelerator’ switch allow for less tiring work in all positions

Otherfeatures ▶ Robustness due to metal gear housing and depth finders ▶ Electronic switch with locking button for continuous operation ▶ Forward/reverse rotation ▶ Practical belt clip for hanging up the tool

Technical dataOrder number 0 601 440 ...Self-drilling screw diameter 6.0 mm


Torque, max. (soft screwdriving applications) 12 Nm


Scope of supply ... 300Carrying case (2 605 438 620) ✔

Depth stop (2 607 002 585) ✔

Screwdriver bit, Phillips No. 2 ✔

Universal holder, magnetic (2 607 000 157) ✔

2

701W 1.5kg

DepthStopScrewdriver GSR6-25TEProfessionalTheuniversaldepthstopscrewdriverwithhightorque

▶ 701 W high-performance motor designed for high torques for power-intensive screwdriving on wooden panels, chipboard and plasterboard as well as seal screws into metal

▶ Precise driving of rows of screws at a constant depth due to the depth stop that is easy to operate with one hand and the exact cut-off clutch

▶ Compact design, comfortable grip and wide ‘accelerator’ switch enable fatigue-free working in all positions

Otherfeatures ▶ Robustness due to metal gear housing and depth finders ▶ Electronic switch with locking button for continuous operation ▶ Depth stop with larger opening width, can be used with socket spanners up to KW 10 for hex screws

▶ Forward/reverse rotation

Technical dataOrder number 0 601 441 ...Self-drilling screw diameter 6.0 mm


Torque, max. (soft screwdriving applications) 20 Nm



Depth stop (2 607 002 585) ✔

Screwdriver bit, Phillips No. 2 ✔

Universal holder, magnetic (2 607 000 157) ✔

Rotary Hammers and Demolition Hammers Immense power for the toughestjobs.

With the rotary hammers from 2–11 kg and the demolition

hammers from 3–27 kg, Bosch offers everything that

professionals need for extreme applications. The rotary

hammers can be used for the hardest materials and offer

immense power for fast work progress. What’s more, the

Bosch Vibration Control reduces vibration and even makes

long drilling and chiselling work more comfortable.

Example: GBH 4-32 DFR Professional. 1st stage: The air buffer, which is larger thanin conventional hammer mechanisms, reduces the air pressure in the hammermechanism. This counteracts the oscillations like a spring and dampens thevibrations where they originate: in the hammer mechanism. 2nd stage: The mainhandle is decoupled from the machine by means of a leaf spring and two swiveljoints. The vibrations already reduced by the first stage are absorbed further.

A look at the effect of Vibration on Control: the GBH 4-32 DFR Professional has thelowest vibration value (8m/s²) compared to the competitors.

Up to 60% less vibration than competitors due to 2stages vibration reduction



Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

550W 2.0kg

RotaryHammerwithSDS-plus GBH2-18REProfessionalThemostcompactandlightweighthammerinitsclass

▶ Extremely compact design and low weight of only 2 kg, ideal for working overhead

▶ High-torque motor and powerful hammer mechanism are optimised for fixing holes up to 10 mm

▶ Reverse operation for removing screws

Otherfeatures ▶ Softgrip on main handle and gear housing ▶ Impact stop for drilling in wood and steel ▶ Overload clutch

Technical dataOrder number 0 611 258 ...Impact energy 0 - 1.7 J




Max. drilling dia. steel 13 mm


Carrying case ✔

Depth stop 210 mm (2 603 001 019) ✔

3

620W 2.3kg

RotaryHammerwithSDS-plus GBH2-22EProfessionalTheall-purposeworkhorsethatdrillsholes30%faster

▶ Revolutionary new impact mechanism ensures 30% faster drilling ▶ Control Electronic: accelerator function for sensitive drilling starts ▶ Overload clutch

Otherfeatures ▶ Impact stop for drilling in wood and steel ▶ Ergonomically designed softgrip handle with long trigger variable speed control

▶ Auxiliary handle with adjustable depth stop can be rotated 360°





Max. drilling dia. masonry, core cutters 68 mm



Carrying case (2 605 438 524) ✔

Depth stop 210 mm (1 613 001 010) ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

620W 2.3kg

RotaryHammerwithSDS-plus GBH2-22REProfessionalTheall-purposeworkhorsethatdrillsholes30%faster

▶ Revolutionary new impact mechanism ensures 30% faster drilling ▶ Control Electronic: accelerator function for sensitive pilot drilling ▶ Rotatable brush plate (equal power in forward and reverse direction)

Otherfeatures ▶ Reverse operation with extremely high torque for screwdriving operations ▶ Overload clutch ▶ Auxiliary handle with adjustable depth stop can be rotated 360° ▶ Ergonomically designed softgrip handle with long trigger variable speed control

▶ Softgrip for a secure hold







Scope of supply ... 704 ... 706Auxiliary handle ✔ ✔

Carrying case (2 605 438 524) ✔ ✔

Depth stop 210 mm (1 613 001 010) ✔ ✔

3

650W 2.3kg

RotaryHammerwithSDS-plus GBH2-23REProfessionalSpecialisttoolfordrillingrowsofholes

▶ Revolutionary new design and impact mechanism ensures faster drilling and robustness

▶ Rotating brush plate for Forward/Reverse application ▶ Overload clutch for user safety

Otherfeatures ▶ Control Electronic: accelerator function for sensitive drilling starts ▶ Impact stop for drilling in wood and steel ▶ Ergnomically designed grip handle with long trigger variable speed control ▶ Auxiliary handle with adjustable depth stop can be rotated 360°







Carrying case (2 605 438 524) ✔

Depth stop 210 mm (1 613 001 010) ✔

New!


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

800W 2.7kg

RotaryHammerwithSDS-plus GBH2-26REProfessionalFasterthanaspeedingbullet–Thesturdytoolforcontinuoususe

▶ Superior drilling rate in the 2kg hammer class ▶ Easy-to-change toolholder ▶ Rotatable brush plate (equal power in forward and reverse operation)

Otherfeatures ▶ Ball grommet for preventing cable breaks ▶ 50 mm spindle collar diameter for more sturdiness ▶ Impact stop for drilling in wood and steel ▶ Softgrip on main handle and auxiliary handle ▶ Overload clutch

Technical dataOrder number 0 611 251 ...Impact energy 0 - 3 J







Carrying case (2 605 438 098) ✔ ✔

Depth stop 210 mm (1 613 001 010) ✔ ✔

3

800W 2.9kg

RotaryHammerwithSDS-plus GBH2-26DFRProfessionalFasterthanaspeedingbullet–Thepowerfulall-rounderwithquick-changechuckfordailyuse

▶ Superior drilling rate in the 2kg hammer class ▶ Exceptionally fast, tool-free changing between SDS-plus and quick-change chuck

▶ Rotation stop for chiselling

Otherfeatures ▶ Ball grommet for preventing cable breaks ▶ Softgrip on main handle and auxiliary handle for a secure hold







Scope of supply ... 76AAuxiliary handle (2 602 025 141) ✔

Carrying case (2 605 438 098) ✔

Depth stop 210 mm (1 613 001 010) ✔

Keyless chuck 13 mm (2 608 572 212) ✔

Pointed chisel (SP no. 2 608 690 095) ✔

SDS-plus quick-change chuck (2 608 572 213) ✔

Set of concrete drill bits (6.5, 8, 10 mm) ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

800W 2.7kg

RotaryHammerwithSDS-plus GBH2-26DREProfessionalFasterthanaspeedingbullet–Theall-rounderfordailyuse

▶ Superior drilling rate in the 2kg hammer class ▶ Rotation stop for chiselling ▶ Impact stop for drilling in wood and steel

Otherfeatures ▶ Easy-to-change toolholder ▶ Ball grommet for preventing cable breaks ▶ Softgrip on main handle and auxiliary handle for a secure hold ▶ Overload clutch ▶ Rotatable brush plate (for equal power in forward and reverse operation) ▶ 50 mm spindle collar diameter for more sturdiness








Carrying case (2 605 438 098) ✔ ✔

Depth stop 210 mm (1 613 001 010) ✔ ✔

3

800W 3.6kg

RotaryHammerwithSDS-plus GBH3-28DFRProfessionalTopperformancewith20%lessvibration

▶ High drilling rate and 20% higher chiselling power than other rotary hammers in its class

▶ 20% less vibration than other hammers in its class for more comfortable working due to Bosch Vibration Control

▶ Quick change chuck for fast changes between drilling with impact in concrete and drilling without impact in wood and metal

Otherfeatures ▶ Balanced weight distribution due to L-shaped design for more comfortable working

▶ Rotation stop for chiselling

Technical dataOrder number 0 611 24A ...Impact energy 0 - 3.5 J






Scope of supply ... 0L0Auxiliary Handle (2 602 025 191) ✔

Carrying case (2 605 438 651) ✔

Depth stop 210 mm (1 613 001 010) ✔

Keyless chuck 13 mm (2 608 572 212) ✔



Set of Concrete drill bits (8,10,12 mm) ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

900W 4.7kg

RotaryHammerwithSDS-plus GBH4-32DFRProfessionalThefastestmulti-hammerinthe4kgclass

▶ Wide range of applications in chiselling and drilling work and when working with a core cutter

▶ Drills up to 30% faster (25 mm diameter) than comparable competitor tools

▶ Low vibration values of only 8 m/s2 for fatigue-free working due to Bosch Vibration Control







Scope of supply ... 171Adapter for BIM hole saw (2 608 584 674) ✔


Carrying case (2 605 438 651) ✔

Depth stop 310 mm (1 613 001 003) ✔

Flat chisel (2 608 590 096) ✔

Keyless chuck 13 mm (2 608 572 212) ✔


Pointed chisel (2 608 590 095) ✔

SDS-plus drill bits (10, 12, 14, 16 mm) ✔


3 pcs, Bi metal Holesaws - 20 mm, 25 mm, 51 mm ✔

3

710W 2,9/3,6kg

DustExtractionHammerwithSDS-plus GBH2-23REAProfessionalThemostcompactsolutionfordust-freedrilling

▶ Convenient working due to particularly compact design ▶ Integrated, removable dust extraction unit for clean, dust-free working ▶ Convenient working even overhead due to particularly compact design

Otherfeatures ▶ Core cutter adapter set for dust extraction when working with core cutters (up to 68 mm)

▶ Retaining valves prevent dust escaping ▶ Changeable micro-filter for cost-effective service ▶ Easy, tool-free removal of the dust extraction unit enables you to also work without dust extraction module

▶ Impact stop for drilling in wood and steel ▶ Transparent dust eye makes exact pilot drilling easier





Drilling dia. concrete, dust extraction unit 4 - 16 mm


Drilling dia. concrete, dust extraction unit 4 - 16 mm

Scope of supply ... 570Auxiliary handle (SP no. 1 619 P06 104) ✔

Carrying case ✔

Dust extraction unit ✔

5 seal rings (SP no. 1 619 P06 107) ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

1050W 5.8kg

RotaryHammerwithSDS-max GBH5-38DProfessionalThepowerfulcombinationhammersettingnewstandardsinperformanceandlifetime

▶ The sturdy hammer with SDS-max toolholder for drilling up to 38 mm diameter

▶ With chisel function for universal application ▶ Long lifetime, even in heavy-duty applications, as a result of the sturdy metal housing and compact design

Otherfeatures ▶ Powerful 1050 W motor ▶ High drilling rate when drilling in concrete thanks to optimised hammer mechanism technology

▶ Vario-Lock with 12 different chisel positions ▶ Service lid for easy replacement of carbon brushes

Technical dataOrder number 0 611 240 ...Impact energy 7 / 9 J

Impact rate at rated speed 2900 bpm

Rated speed 320 rpm



Carrying case (2 605 438 461) ✔

Grease tube (SP no. 1 615 430 010) ✔

3

1350W 8.2kg

RotaryHammerwithSDS-max GBH7-46DEProfessionalThesturdypowerpack

▶ The most powerful hammer in its class thanks to its powerful 1350 W motor ▶ Extremely high material removal rate when chiselling thanks to Turbo-Power with a single impact force of up to 15 J

▶ Long lifetime due to robust metal components

Otherfeatures ▶ Best operating comfort thanks to individually controllable speed, lockable switch pawl in chiselling operation and new, ergonomic auxiliary handle






Carrying case (2 605 438 396) ✔

Grease tube (SP no. 1 615 430 010) ✔

Machine cloth (SP no. 1 619 200 444) ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

650W 3.5kg

DemolitionHammerwithSDS-plus GSH3EProfessionalThespecialisttoolforrenovationandrefurbishment

▶ High material removal rate thanks to powerful 650 W motor and special tile chisel

▶ Long lifetime thanks to the extremely sturdy hammer mechanism and toolholder as well as oil lubrication

▶ Excellent handling thanks to its low weight of only 3.5 kg, its compact design, lockable accelerator switch and softgrip

Otherfeatures ▶ Perfect coordination of hammer and chisel: this provides up to 40% faster work progress

▶ Up to 90% less tile breakage thanks to the optimum interaction of hammer and chisel

▶ Service cover for easy and fast changing of the carbon brushes

Technical dataOrder number 0 611 320 ...Impact energy 4.3 J


Toolholder SDS-plus

Scope of supply ... 703Auxiliary handle ✔

Carrying case (2 605 438 482) ✔

Grease tube (SP no. 1 615 430 005) ✔


Tile chisel 260 x 40 mm (2 608 690 091) ✔

3

1050W 4.9kg

DemolitionHammerwithSDS-max GSH388ProfessionalThepowerfuldemolitionhammerformaximumchisellingandlongestlifetime

▶ With 10 J impact force and exemplary quality, the GSH 388 impresses with its material removal rate and lifetime

▶ Long lifetime, even in heavy-duty applications, as a result of the sturdy metal housing and compact design

▶ Powerful 1050 W motor

Otherfeatures ▶ High impact force for rapid work progress thanks to the optimised hammer mechanism technology, patented by Bosch

▶ Lockable switch pawl for fatigue-free continuous chiselling work ▶ Vario-Lock with 12 different chisel positions

Technical dataOrder number 0 611 388 ...Impact energy 8 / 10 J


Toolholder SDS-max


Carrying case (2 605 438 176) ✔ ✔

Grease tube (SP no. 1 615 430 010) ✔ ✔

Pointed chisel (SP no. 1 618 600 029) ✔ ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

1150W 6.2kg

DemolitionHammerwithSDS-max GSH5CEProfessionalThechisellingspecialistwithVibrationControl

▶ Impact force of 13 J for the highest material removal rate in its class ▶ Vibration Control of 8 m/s2 ensures convenient working, even in time-intensive applications

▶ Long lifetime even in extremely hard operation thanks to robust metal housing

Otherfeatures ▶ Patented setting wheel for variable adjustment of the impact rate for optimum performance

▶ Patented, lockable switch pawl for fatigue-free chiselling work ▶ Vario-Lock: 12 chisel position settings for convenient working ▶ Constant Electronic, service display and standby display for maximum convenience

▶ Ball grommet for high movement radius and for preventing cable breaks



Toolholder SDS-max


Carrying case ✔

Grease tube (SP no. 1 615 430 010) ✔

Machine cloth ✔

Pointed chisel 400 mm (2 608 690 103) ✔

3

1500W 10.1kg

DemolitionHammerwithSDS-max GSH11EProfessionalThespecialisttoolforbreakthroughsanddemolitionwork

▶ Extreme impact force with 25 J ▶ Low-vibration in operation and no-load ▶ Low feed pressure, for fatigue-free working

Otherfeatures ▶ Service display ▶ SDS-max toolholder with integrated dust protection ▶ Variable chisel fitting in 12 angle positions ▶ Auxiliary handle can be adjusted and rotated 360° ▶ Foam handle ▶ Wide sliding switch for convenient switching on and off ▶ High-volume carrying case ▶ Cut-off carbon brushes ▶ Also suitable for left-handers



Toolholder SDS-max


Carrying case (2 605 438 297) ✔ ✔

Flat chisel 400 x 25 mm (1 618 600 202) ✔ ✔

Grease tube (SP no. 1 615 430 010) ✔ ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

1750W 16.5kg

Breaker GSH16-30ProfessionalExtremepowerfor13tonsofmaterialremovalperday

▶ Extremely high material removal rate due to 45 J single impact force and 1750 watts motor power: 13 tons of material removal per day

▶ Extremely long lifetime due to robust design and use of high-quality materials ▶ Vibration Control for reduction of vibrations that are hazardous to health and, therefore, longer operating time and greater ease of use

Otherfeatures ▶ Unique: the GSH 16-30 Professional can be easily and conveniently transported on rollers in the trolley that is supplied as standard

▶ Excellent handling thanks to the large handle ▶ The on/off switch is perfectly positioned, which prevents the tool from being switched off unintentionally

Technical dataOrder number 0 611 335 ...Impact energy 45 J


Toolholder 30 mm internal hexagon

Scope of supply ... 1L0 ... 100Carrying handle (2 602 025 170) ✔ ✔

Grease tube (SP no. 1 615 430 010) ✔ ✔

Machine cloth – ✔

Machine cloth (SP no. 1 619 200 444) ✔ –

Pointed chisel 400 mm (2 608 690 111) ✔ ✔

Trolley (2 605 438 628) ✔ ✔

3

1900W 29.0kg

Breaker GSH27ProfessionalChiselhammerforthemostheavy-dutydemolitionwork

▶ High single impact force ▶ Extremely sturdy construction for extremely long lifetime ▶ Low-vibration in operation and no-load due to balanced hammer mechanism and recoil-dampened handles

Otherfeatures ▶ Pneumatic tools 1 1/8˝ can be used with collar ▶ Dustproof toolholder ▶ Cut-off carbon brushes ▶ Connection to any light socket, 16 A fuse or alternating current generator as of 3 kVA

▶ For breaking road surfaces, reinforced concrete ceilings, foundations, etc. ▶ Digs tough and hard masses, crusted gravel and lots more.

Technical dataOrder number 0 611 304 ...Impact energy 54 J


Toolholder 28 mm internal hexagon

Scope of supply ... 103 ... 142Allen key KW 5 (SP no. 1 907 950 006) ✔ ✔

Allen key KW 6 (SP no. 1 907 950 007) ✔ ✔


Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3

Range of applications for all SDS–plus hammers at aglance.

Ordernumber

Rated powerinput (W)

Weightwithout cable(kg)

Impactenergy (J)

Drilling with/without impact,screwdriving

Chiselling Drilling in concrete with SDS-plus hammer Drilling with core cutters in masonry (dia. in mm)

2-kilo Rotary Hammers

GBH 2-18 REProfessional 06112583.. 550 2.0 0 - 1,7


GBH 2-23 REProfessional 06112504 650 2.3 0 - 2,5

GBH 2-23 REAProfessional 06112505.. 710 - 0 - 2,5

GBH 2-26 DREProfessional 06112537.. 800 2.7 0 - 3

GBH 2-26 DFRProfessional 06112547.. 800 2.9 0 - 3

Cordless Rotary Hammers

GBH 24 VProfessional 06112562.. 350 3.8 0 - 1,3

GBH 36 V-LIProfessional 0611900R.. 600 4.3 0 - 3

GBH 36 V-LI CompactProfessional 0611903R.. 430 2.9 0 - 1,7


GBH 3-28 DFRProfessional 061124A 800 3.6 0 - 3,5

3-kilo Demolition Hammer

GSH 3 EProfessional 06113207.. 650 3.5 4,3



1 With dust extractor 2 Without dust extractorTotal range ofapplication

Optimum useApplication with corecutters



Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3

Range of applications for all SDS–plus hammers at aglance.

Ordernumber

Rated powerinput (W)

Weightwithout cable(kg)

Impactenergy (J)

Drilling with/without impact,screwdriving

Chiselling Drilling in concrete with SDS-plus hammer Drilling with core cutters in masonry (dia. in mm)




GBH 2-23 REProfessional 06112504 650 2.3 0 - 2,5

GBH 2-23 REAProfessional 06112505.. 710 - 0 - 2,5

GBH 2-26 DREProfessional 06112537.. 800 2.7 0 - 3


Cordless Rotary Hammers

GBH 24 VProfessional 06112562.. 350 3.8 0 - 1,3

GBH 36 V-LIProfessional 0611900R.. 600 4.3 0 - 3

GBH 36 V-LI CompactProfessional 0611903R.. 430 2.9 0 - 1,7


GBH 3-28 DFRProfessional 061124A 800 3.6 0 - 3,5


GSH 3 EProfessional 06113207.. 650 3.5 4,3



1 With dust extractor 2 Without dust extractorTotal range ofapplication

Optimum useApplication with corecutters



Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3

Range of applications for all rotary hammers, demolitionhammers and breakers from 5 kilos at a glance

Ordernumber

Rated power input(W)

Weight withoutcable (kg)

Impact energy (J) Chiselling Hammer drill bits (dia. in mm) Drilling with core cutters and breakthrough drill

5-kilo Rotary Hammer

GBH 5-38 DProfessional 06112400.. 1050 5.8 7 / 9


GBH 7-46 DEProfessional 06112637.. 1350 8.2 2 - 15


GSH 388Professional 06113880.. 1050 4.9 8 / 10

GSH 5 CEProfessional 06113210.. 1150 6.2 2 - 13


GSH 11 EProfessional 06113167.. 1500 10.1 6 - 25

16-kilo Breaker with internal hexagon toolholder 28 / 30 mm

GSH 16-30Professional 06113351.. 1750 16.5 45

Total range of applicationHammer drill bits

Optimum use Application with core cuttersApplication with breakthroughdrill bits



Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3

Range of applications for all rotary hammers, demolitionhammers and breakers from 5 kilos at a glance

Ordernumber

Rated power input(W)

Weight withoutcable (kg)

Impact energy (J) Chiselling Hammer drill bits (dia. in mm) Drilling with core cutters and breakthrough drill


GBH 5-38 DProfessional 06112400.. 1050 5.8 7 / 9


GBH 7-46 DEProfessional 06112637.. 1350 8.2 2 - 15


GSH 388Professional 06113880.. 1050 4.9 8 / 10

GSH 5 CEProfessional 06113210.. 1150 6.2 2 - 13


GSH 11 EProfessional 06113167.. 1500 10.1 6 - 25

16-kilo Breaker with internal hexagon toolholder 28 / 30 mm

GSH 16-30Professional 06113351.. 1750 16.5 45

Total range of applicationHammer drill bits

Optimum use Application with core cuttersApplication with breakthroughdrill bits



Rot

ary

Ham

mer

san

dD

emol

itio

nH

amm

ers

3

Diamond Technology More cutting power with longestlifetime in class – the marble sawfrom Bosch.

Powered by a robust 1300W motor, GDM 13-34 has the

longest tool lifetime in its class. Built to deliver perfect

balance and control, it provides a clear view of the cutting

line at 45 & 90 degrees and an adjustable base plate for

45 degree bevel cuts. With its handy and ergonomic design,

fatigue-free work is ensured.



Dia

mon

dTe

chno

logy

4


Dia

mon

dTe

chno

logy

1300W 2.8kg

MarbleSaw GDM13-34ProfessionalMorecuttingpowerwiththelongestlifetimeinclass

▶ Powerful 1300W marble saw for fast and precise cutting in marble/granite/tile/stone ▶ Good dust insulation for maximum tool durability ▶ Handy, lightweight 2.8 kg

Otherfeatures ▶ Strong and robust motor for longer lifetime ▶ Higher power for faster work progress ▶ Good dust insulation ▶ Ventilation holes specially designed for dust insulation and optimal air circulation ▶ Flat bearing flange with channel design to prevent dust accumulation ▶ Ergonomic handle with dimples and soft grip for anti-slip and extra handling comfort ▶ Optimized gripping space for extra comfort ▶ Clear view of cutting line at 45° and 90° ▶ Compact and adjustable base plate for 45° bevel cut

Technical dataOrder number 0 601 36A ...No-load speed 12000 rpm

Saw blade diameter 110 mm

Saw blade bore 20.0 mm

Cutting depth (90°) 34 mm


Scope of supply ... 2L0Allen key KW 5 (SP no. 1 907 950 006) ✔

Clamping bolt with washer (1 619 P00 278) ✔

Clamping flange (1 619 P06 295) ✔

Mounting flange (1 619 P07 057) ✔

Ring spanner (SP no. 1 619 P00 281) ✔

New!

4

1250W 2.8kg

MarbleSaw GDM12-34ProfessionalThepowerfulandcompacttoolforwetanddrycutting

▶ Powerful marble saw with 1250 W for fast and precise wet or dry cutting in marble

▶ Adjustable sole plate for angled cuts ▶ Handy, lightweight 2.8 kg

Otherfeatures ▶ Dustproof and waterproof housing for a long service life ▶ Safe and ergonomically optimum handling






Scope of supply ... 1L0Clamping flange (SP no. 1 619 P00 238) ✔

Mounting flange (SP no. 1 619 P00 239) ✔

Ring spanner (SP no. 1 619 P00 281) ✔

Socket wrench (SP no. 1 619 P00 282) ✔


Dia

mon

dTe

chno

logy

4

Working on Metal The small angle grinder GWS 7Professional

A lot is expected from professionals. So it's only fair to

demand the same from your power tools. The GWS Angle

Grinder is today's powerhouse of efficiency and design.

A Ø 56 mm slim, fatigue-free and powerful 720 W motor

make tough jobs easy. In every way, the Bosch GWS 7

Professional puts power firmly and comfortably in your

hand.



Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

5


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

670W 1.8kg

AngleGrinder GWS6-100ProfessionalHandyandcompact

▶ 670 watts of power ▶ Good handling due to ergonomically adapted housing ▶ Spindle lock for easy disc change

Otherfeatures ▶ Flat gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

▶ Anti-rotation protective guard – easily adjustable, provides reliable protection ▶ Cut-out carbon brushes


Grinding spindle thread M 10

Disc diameter 100 mm

Rubber sanding plate, diameter 100 mm

Wire cup brush, diameter 70 mm

Scope of supply ... 006 ... 026 ... 083Auxiliary handle (1 602 025 024) ✔ ✔ ✔

Back flange (2 605 703 030) ✔ ✔ ✔

Carbon brush set (SP no. 1 607 031 223) – – ✔

Locking nut (2 603 340 018) ✔ ✔ ✔

Protective guard (1 619 P06 546) ✔ ✔ ✔

Two-hole spanner (1 607 950 040) ✔ ✔ ✔

5

720W 1.5kg

AngleGrinder GWS7-100ProfessionalSlimandpowerfultoolineveryhand

▶ Ø56mm slim housing in round shape for super comfortable holding ▶ Dimple surface for anti-slip ▶ Powerful and robust 720 W motor

Otherfeatures ▶ Specially designed air inlets for optimal air flow and cooling ▶ Small gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect motor against sharp grinding dust for longer service life

▶ Auto cut-off carbon brushes ▶ Two-motion switch for maximum user's safety ▶ Spindle lock for easy disc change ▶ Anti-rotation protective guard to provide reliable protection ▶ Side handle can be used on right or left


Grinding spindle thread M10




Scope of supply ... 0L0– –


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

720W 1.8kg

AngleGrinder GWS7-100TProfessionalSlimandpowerfultoolineveryhand

▶ 56 mm slim housing in round shape for super comfortable holding ▶ Powerful and robust 720 W motor ▶ High torque model with metal bearing flange, perfect for any tough applications

Otherfeatures ▶ Dimple surface for anti-slip ▶ Specially designed air inlets for optimal air flow and cooling ▶ Small gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect motor against sharp grinding dust for longer service life

▶ Auto cut-off carbon brushes







Back flange (2 605 703 030) ✔

Locking nut (2 603 340 018) ✔

Protective guard (1 619 P06 546) ✔

Two-hole spanner (1 607 950 040) ✔

1 pair of carbon brush ✔

5

720W 1.5kg

AngleGrinder GWS7-100ETProfessionalSlimandpowerfultoolineveryhand

▶ 56 mm slim housing in round shape for super comfortable holding ▶ Powerful and robust 720 W motor ▶ High torque model with metal bearing flange, perfect for any tough applications

Otherfeatures ▶ Dimple surface for anti-slip ▶ Specially designed air inlets for optimal air flow and cooling ▶ Small gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect motor against sharp grinding dust for longer service life







Back flange (2 605 703 030) ✔

Locking nut (2 603 340 018) ✔



1 pair of carbon brush ✔


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

850W 1.8kg

AngleGrinder GWS8-100CProfessionalHandyandcompact

▶ 850 watts of power ▶ Good handling due to ergonomically adapted housing ▶ Microprocessor electronics for constant speed, overload protection, smooth start and starting current limitation

Otherfeatures ▶ Spindle lock for easy disc change ▶ Flat gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

▶ Anti-rotation protective guard – easily adjustable, provides reliable protection ▶ Cut-out carbon brushes







Back flange (2 605 703 030) ✔

Locking nut (2 603 340 018) ✔



5

850W 1.8kg

AngleGrinder GWS8-100CEProfessionalHandyandcompact

▶ 850 watts of power ▶ Good handling due to ergonomically adapted housing ▶ Microprocessor electronics for constant speed, overload protection, smooth start and starting current limitation

Otherfeatures ▶ Spindle lock for easy disc change ▶ Flat gear head for working in tight spaces ▶ Gear head can be rotated in 90° steps ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

▶ Anti-rotation protective guard – easily adjustable, provides reliable protection ▶ Cut-out carbon brushes ▶ Handle can be used on right or left







Back flange (2 605 703 030) ✔

Locking nut (2 603 340 018) ✔




Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

1100W 2.0kg

AngleGrinder GWS11-125CIProfessionalThepowerfultoolwithKickBackStop

▶ KickBack Stop: detects when the tool is jammed and shuts it down immediately

▶ Powerful 1100 W Champion motor with restart protection ▶ Anti-rotation protective guard – quickly and easily adjustable, provides reliable protection

Otherfeatures ▶ Vibration Control auxiliary handle ensures your joints are protected during working

▶ Direct cooling for high overload capability and long lifetime ▶ Constant Electronic for constant speed, also under heavy load ▶ Overload protection, smooth start and starting current limitation ▶ Good handling thanks to slim housing ▶ Gear head can be rotated in 90° steps






Scope of supply ... 200 ... 240Back flange (1 605 703 099) ✔ ✔

Locking nut (1 603 340 040) ✔ ✔

Protective guard (1 605 510 365) ✔ ✔

Two-hole spanner (1 607 950 043) ✔ ✔

Vibration Control auxiliary handle (2 602 025 171) ✔ ✔

5

1400W 2.2kg

AngleGrinder GWS14-125CIProfessionalThepowerpackwithKickBackStop


▶ Extremely powerful 1400 W Champion motor with restart protection ▶ Anti-rotation protective guard – quickly and easily adjustable, provides reliable protection

Otherfeatures ▶ Vibration Control auxiliary handle ensures your joints are protected during working

▶ Direct cooling for high overload capability and long lifetime ▶ Constant Electronic for constant speed, also under heavy load ▶ Overload protection, smooth start and starting current limitation ▶ Good handling thanks to slim housing ▶ Gear head can be rotated in 90° steps






Scope of supply ... 200Back flange (1 605 703 099) ✔

Locking nut (1 603 340 040) ✔

Protective guard (1 605 510 365) ✔


Vibration Control auxiliary handle (2 602 025 171) ✔

490 mm

225 mm


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

1400W 2.3kg

AngleGrinder GWS14-150CIProfessionalThepowerpackwithKickBackStop


Otherfeatures ▶ Anti-rotation protective guard – quickly and easily adjustable, provides reliable protection

▶ Vibration Control auxiliary handle ensures your joints are protected during working

▶ Direct cooling for high overload capability and long lifetime ▶ Constant Electronic for constant speed, also under heavy load ▶ Overload protection, smooth start and starting current limitation ▶ Good handling thanks to slim housing






Scope of supply ... 200Back flange (1 605 703 099) ✔

Locking nut (1 603 340 040) ✔



Vibration Control auxiliary handle (2 602 025 171) ✔

5

1250W 2.5kg

Polisher GPO12CEProfessionalErgonomicandpowerfulforaneasybutyetbrilliantpolish

▶ Powerful motor with a 1250 W ▶ Electronic variable speed control for optimum adaptation to all applications ▶ Ergonomic main handle with soft grip for better and comfortable handling

Otherfeatures ▶ Optional side handle or D-handle to fit different needs ▶ Optimized lock-on switch with integrated lock-on function for easy control ▶ Spindle lock for easy accessory change ▶ With a low weight of just 2.5 kg for fatigue-free handling




Scope of supply ... 0L0Auxiliary D-handle ✔


Lambswool bonnet for polishing plate ✔

M14/M16 adaptor ✔

Polishing plate ✔

Spacer disc ✔

Wrench ✔

New!


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

1400W 3.5kg

Polisher GPO14EProfessionalThepowerfultoolwithControlElectronic

▶ Powerful motor with a massive 1400 W ▶ Control Electronic for optimum adaptation of the speed to all applications ▶ Optimum no-load speed for a polisher

Otherfeatures ▶ Handy grip angled to suit the application. ▶ Flat gear head ▶ Third securing thread for auxiliary handle, triple-control safety switch ▶ Gear housing can be adjusted by 90° in four directions ▶ Run-out support secured against twisting ▶ Synthetic resin-armoured coils





Cup wheel, diameter 150 mm

Polishing sponge, diameter 160 mm

Surface brush, diameter 175 mm


Buffing disc (SP no. 9 618 086 718) ✔

Lambswool bonnet (9 618 085 307) ✔

Pin-type face-wrench (F 000 635 185) ✔

Plain washer (SP no. 2 916 011 022) ✔

Round nut (1 603 345 004) ✔

5

2000W 5.0kg

AngleGrinder GWS20-180ProfessionalThelightweightandcompacttool

▶ Powerful 2000 W motor ▶ Light and compact for optimum handling ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

Otherfeatures ▶ Revolving gear head enables optimised adaptation to every work situation ▶ Triple-control safety switch ▶ Bosch SDS quick-locking nut available as an accessory ▶ Individual barcode for easy tool identification





Back flange (1 605 703 099) ✔ ✔

Locking nut (1 603 340 040) ✔ ✔

Protective guard (2 605 510 297) ✔ ✔

Two-hole spanner (1 607 950 048) ✔ ✔


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

2200W 5.0kg

AngleGrinder GWS22-180ProfessionalLightandpowerful

▶ Powerful 2200 W Champion motor for fast work progress ▶ Low weight for optimal handling ▶ Double-sealed ball bearing and the especially sturdy gearing guarantee a long lifetime

Otherfeatures ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

▶ Triple-control safety switch ▶ Revolving gear head enables optimised adaptation to every work situation ▶ Bosch SDS quick-locking nut available as an accessory


Grinding spindle thread M14


Scope of supply ... AL0Auxiliary handle (2 602 025 075) ✔

Clamping flange (1 605 703 099) ✔

Locking nut (1 603 340 040) ✔



New!5

2000W 5.3kg

AngleGrinder GWS20-230ProfessionalThecompactandlightweighttool

▶ Powerful 2000 W motor ▶ Light and compact for optimum handling ▶ Armoured coils that protect the motor against sharp grinding dust ensure long lifetime

Otherfeatures ▶ Revolving gear head enables optimised adaptation to every work situation ▶ Triple-control safety switch ▶ Bosch SDS quick-locking nut available as an accessory ▶ Individual barcode for easy tool identification





Back flange (1 605 703 099) ✔

Locking nut (1 603 340 040) ✔




Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

500W 1.3kg

StraightGrinder GGS27ProfessionalThehandy,universaltool

▶ Particularly handy, short design, also suitable for left-handers ▶ Protected location of switch prevents inadvertent activation

Technical dataOrder number 0 601 210 ...Tools Grinding stones DIN 69 170

up to 25 mm diameterNo-load speed 27000 rpm

Toolholder Collets up to 8 mm diameter

Spindle collar diameter 43 mm

Scope of supply ... 006Collet 6 mm (2 608 570 047) ✔

Dressing stone (1 607 929 000) ✔

Holding pin (SP no. 2 603 101 035) ✔

Open-ended spanner KW 17 (1 607 950 525) ✔

5

500W 1.6kg

StraightGrinder GGS27LProfessionalTheaccuratetoolformaximumprecision

▶ Grinding spindle with particularly accurate bearing for precise grinding work ▶ Suitable for extremely fine work, even in hard-to-reach areas ▶ Protected switch prevents inadvertent switching-on

Otherfeatures ▶ Perfectly positioned air inlets for high overload capability and a long lifetime ▶ Robust gear housing ▶ Good handling, also for left-handers

Technical dataOrder number 0 601 215 ...Tools Grinding stones DIN 69 170

up to 25 mm diameterNo-load speed 27000 rpm

Toolholder Collets up to 8 mm diameter

Spindle collar diameter 35 mm

Scope of supply ... 006Collet 6 mm (2 608 570 084) ✔

Open-ended spanner KW 17 (1 607 950 525) ✔


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

1150W 3.9kg

StraightGrinder GGS6ProfessionalThemostpowerfulmodelfromBoschwithquick-lockingnut

▶ Powerful 1150 W motor for high material removal rate ▶ Switch-on lock against inadvertent activation ▶ Triple-control safety switch

Otherfeatures ▶ Cut-out carbon brushes ▶ Good handling, also for left-handers

Technical dataOrder number 0 601 214 ...Tools Resin-bonded conical

grinding discs for min. 45 m/s up to 125 mm diameter x 32/26 knotted round brushes up to 125 mm diameter

No-load speed 6800 rpm

Toolholder Diameter 20 mm / Spindle 5/8˝

Scope of supply ... 042Allen key KW 6 (SP no. 1 907 950 007) ✔

Clamping flange (SP no. 2 605 703 010) ✔

Hex nut (SP no. 1 603 300 012) ✔

Holding pin (1 603 101 017) ✔

Protective guard (SP no. 3 605 510 014) ✔

Spring washer (SP no. 3 605 703 064) ✔

5

700W 16.2kg

Double-wheeledBenchGrinder GSM200ProfessionalThepowerfultoolforthetoughestapplications

▶ Powerful motor on ball bearings, fully encapsulated in die-cast housing to keep the motor free of dust

▶ Protective guards made of cast metal

Otherfeatures ▶ Large, adjustable spark protection glasses ▶ Stable, adjustable workpiece supports ▶ Easy wheel changes ▶ Rubber feet for secure, low-vibration stance ▶ Dust-protected on-off switch

Technical dataOrder number 0 601 277 ...Grinding disc diameter 200 mm

Grinding disc widths 25 mm

Grinding disc bore 32 mm

Scope of supply ... 103Grinding wheel, normal grit, grit 36 (2 608 600 111) ✔

Grinding wheel, normal grit, grit 60 (2 608 600 112) ✔


Ang

leG

rind

ers

and

Met

alW

orki

ngT

ools

500W 2.7kg

Shear GSC2,8ProfessionalTheslimtoolwithreversibleblade

▶ Slim design with planetary gears ▶ Reversible blade for particularly high economic efficiency ▶ Knob grip for comfortable and safe guidance

Otherfeatures ▶ Tight curve radius for flexible cuts ▶ Sliding switch adapted to grip and covered ▶ Optimum view of cutting line ▶ Sturdy design for continuous use ▶ Powerful 500-watt motor ▶ Safety switch

Technical dataOrder number 0 601 506 ...Stroke rate, load 1500 spm

Stroke rate at no load 2400 spm

Cutting capacity Steel (400 N/mm2), max. 2.8 mm



Cutting capacity Aluminium (250 N/mm2), max. 3.5 mm

Scope of supply ... 142Alignment gauge (SP no. 2 607 970 001) ✔

Allen key KW 2.5 (SP no. 1 907 950 003) ✔

Allen key KW 5 (SP no. 1 907 950 006) ✔

Blade (2 607 010 025) ✔

5

500W 2.0kg

Nibbler GNA2,0ProfessionalThehandytoolforcut-outsofallkinds

▶ 500 watts of power ▶ Slim, narrow design for optimum handling ▶ Swivel-mounted die plate for better manoeuvrability in corners

Otherfeatures ▶ Easy-to-change cutting tools ▶ Lockable die plate for straight cuts ▶ Working to scribe mark and template easily possible ▶ For interior cut-outs

Technical dataOrder number 0 601 530 ...Cutting track width 6 mm

Pre-drilling for interior cutout 16 mm

Smallest radius 3 mm




Scope of supply ... 142Allen key KW 2.5 (SP no. 1 907 950 003) ✔

Die plate (2 608 639 900) ✔

Punch (2 608 639 013) ✔

Working on Wood Woodworking perfection.

Woodworking sets high requirements that Bosch feels

especially obliged to meet. Whether it be sanding, planing or

routing – the professional blue power tools from Bosch

guarantee optimum convenience and the highest precision.

High material removal rate or a fine finish, large surfaces or

hard-to-reach corners: Bosch offers the right tool for every

type of work on surfaces with its wide range of random orbit

sanders, orbital sanders, belt sanders, planers and routers.



Sand

ers,

Pla

ners

&R

oute

rs

6


Sand

ers,

Pla

ners

&R

oute

rs

250W 1.3kg

RandomOrbitSander GEX125-1AProfessionalFatigue-freesandinginanyposition

▶ Compact, ergonomic design with three softgrip surfaces for variable grip positions and outstanding convenience

▶ Bosch Micro-filter system: perfect, efficient dust extraction ▶ Sanding plate brake prevents damage (e.g. scoring) on workpiece

Otherfeatures ▶ Random orbit motion plus rotation ensure the finest sanding with high sanding performance

▶ Velcro-type fastening for rapid, convenient sanding sheet changes

Technical dataOrder number 0 601 387 ...Sanding plate diameter 125 mm


Orbital stroke rate 24000 opm

Eccentricity 1.25 mm

Sanding sheet / disc attachment Velcro-type fastening

Oscillating circuit diameter 2.5 mm

Scope of supply ... 0L0Dust box (SP no. 2 609 199 176) ✔

Sanding disc ✔

6

250W 1.3kg

RandomOrbitSander GEX125-1AEProfessionalFatigue-freesandinginanyposition

▶ Compact, ergonomic design with three softgrip surfaces for variable grip positions and outstanding convenience

▶ Bosch Micro-filter system: perfect, efficient dust extraction ▶ Speed preselection for work suited to the material

Otherfeatures ▶ Constant Electronic and speed preselection ▶ Sanding plate brake prevents damage (e.g. scoring) on workpiece ▶ Random orbit motion plus rotation ensure the finest sanding with high sanding performance

▶ Velcro-type fastening for rapid, convenient sanding sheet changes

Technical dataOrder number 0 601 387 ...Sanding plate diameter 125 mm


Orbital stroke rate 15000 - 24000 opm

Eccentricity 1.25 mm

Sanding sheet / disc attachment Velcro-type fastening


Scope of supply ... 5L0Dust box (SP no. 2 609 199 176) ✔

Sanding disc ✔


Sand

ers,

Pla

ners

&R

oute

rs

330W 2.6kg

OrbitalSander GSS280AProfessionalThesanderforperfectsurfacequality

▶ New Velcro-type sanding plates with up to 5 times longer lifetime; for the finest surfaces; no rounding of edges

▶ The low-vibration, smooth running ensures fatigue-free work; the ergonomic shape enables exact guidance in one-hand or two-hand operation

▶ Multi-clamp system for use of sanding sheets with and without Velcro-type fastening

Otherfeatures ▶ Frontal flush sanding possible thanks to removable auxiliary handle ▶ High sanding performance ▶ Bosch Micro-filter System: perfect mobile extraction ▶ Also suitable for left-handers


No-load orbital stroke rate 22000 opm


Sanding plate, width 114 mm

Sanding plate, length 226 mm

Sanding sheet for clamping, width 115 mm

Sanding sheet for clamping, length 280 mm

Scope of supply ... 003 ... 006Allen key KW 5 ✔ ✔

Paper dust bag ✔ ✔

Velcro-type sanding sheet ✔ ✔

6

190W 1.4kg

OrbitalSander GSS230ProfessionalTheprofessionalentry-levelclasswithhighpower

▶ Powerful 190 watts for high material removal rate and this with very smooth running

▶ Easy and robust clamping system ▶ Softgrip for high level of comfort and low vibration


No-load orbital stroke rate 24000 opm


Sanding plate, width 92 mm

Sanding plate, length 182 mm

Sanding sheet for clamping, width 93 mm

Sanding sheet for clamping, length 230 mm

Scope of supply ... 0L03 Sanding sheets ✔


Sand

ers,

Pla

ners

&R

oute

rs

710W 3.2kg

BeltSander GBS75AProfessionalTherobust,handytool

▶ Extremely handy for removing, surface sanding, smoothing and cleaning on wood, plastic and metal

▶ Sturdy toothed belt and metal toothed belt wheels for long lifetime ▶ Aluminium rollers for heavy-duty use

Otherfeatures ▶ Optimised sanding results due to graphite-coated sanding plate ▶ Stable quick-clamping lever for easy belt changes ▶ Fine deflection roller adjustment for exact belt running ▶ Removable auxiliary handle for sanding flush to edges ▶ Connection for dust extraction with dust extraction bag and vacuum cleaner ▶ Offered in attractive set with comprehensive accessories

Technical dataOrder number 0 601 274 ...Belt speed 300 m/min

Sanding surface, width 75 mm

Belt, length 533 mm

Belt, width 75 mm

Power output 350 W

Scope of supply ... 004Dust box (SP no. 2 605 411 129) ✔

Fitting (SP no. 2 605 702 038) ✔

6

550W 1.5kg

PalmRouter GMR1ProfessionalThehandytoolforadjustmentandroutingwork

▶ 550 W – The most powerful palm router ▶ Very suitable for rounding off deck planks and railings, hinge mortising, decorative working on edges, groove cutting, dovetail cutting, window cutouts, decorative inlays, flush trimming and more

▶ Power and precision in your hand

Otherfeatures ▶ Robust aluminium base – durable, solid and precise ▶ Fast and precise depth setting for rough and fine adjustment ▶ Unique handle recesses for additional stability, especially when routing edges

▶ Practical front spindle lock on the motor for easy router bit changes with an open-ended spanner

▶ Quick-change system for easy locking of the motor in different basic units ▶ Palmgrip design – The most comfortable palm router in its class ▶ Angled cable outlet keeps cable out of the way


Toolholder 3 – 6 mm

Scope of supply ... 0L0Guide bracket (2 609 110 225) ✔

Laminate trim guide (SP no. 2 609 199 030) ✔

Straight edge guide (2 609 110 224) ✔

Template guide (2 609 110 223) ✔

Wrench ✔


Sand

ers,

Pla

ners

&R

oute

rs

710W 2.5kg

Planer GHO10-82ProfessionalThecompacttoolwitheasyhandling

▶ Small, handy machine with powerful 710 W motor for all on-site fitting work ▶ HSS planer blade, resharpenable ▶ Parking rest

Otherfeatures ▶ Switch-on lock for left-handers and right-handers ▶ 3 V-grooves for easy and flexible routing

Technical dataOrder number 0 601 594 ...Adjustable chip thickness 0 - 1.0 mm

Adjustable rebating depth 0 - 9 mm


Scope of supply ... 006Guide bracket (SP no. 2 608 005 015) ✔

Spanner ✔

Stop bracket (SP no. 1 601 332 018) ✔

6

Saws Combining power and precision.

The professional hand-held circular saws for trade and

industry from Bosch have been specially developed for the

requirements of skilled construction site workers: they have

powerful motors with extremely high torque and they can

even withstand impacts on the hardest surfaces thanks to

their high-quality metal components.

Bosch developed the first jigsaw for professional tradesmen

in 1947, and has continually expanded and improved the

product range ever since. Regardless of whether you need a

tool for precise sawing at accurate angles or for robust use:

Bosch offers the right jigsaw for every application.



Saw

s

7


Saw

s

400W 1.7kg

Jigsaw GST65ProfessionalTop-classconvenienceintheentrylevelclass

▶ Streamlined, round handle with dimples for fatigue-free cutting ▶ Two-way lock-on button for left and right handed users ▶ Sturdy trumpet cable design

Otherfeatures ▶ Safety pin for user safety ▶ Excellent power to weight ratio

Technical dataOrder number 0 601 509 ...No-load stroke rate 3100 spm

Cable length 2.5 m

Stroke height 18 mm

Cutting depth in wood 65 mm

Cutting depth in aluminium 12 mm

Cutting depth in non-alloyed steel 3 mm

Scope of supply ... 1L0Saw blade ✔

Screwdriver ✔

Splinter guard (SP no. 2 601 016 065) ✔7

400W 1.7kg

Jigsaw GST65EProfessionalTop-classconvenienceintheentrylevelclass

▶ Streamlined, round handle with dimples for fatigue-free cutting ▶ Two-way lock-on button for left and right handed users ▶ Sturdy trumpet cable design

Otherfeatures ▶ Safety pin for user safety ▶ Stroke rate control ▶ Excellent power to weight ratio

Technical dataOrder number 0 601 509 ...No-load stroke rate 500 - 3100 spm

Cable length 2.5 m

Stroke height 18 mm




Scope of supply ... 2L0Saw blade ✔

Screwdriver ✔

Splinter guard (SP no. 2 601 016 065) ✔


Saw

s

580W 2.4kg

Jigsaw GST80PBProfessionalTheclassictool

▶ Sturdy “double” design: metal gear housing with additional plastic casing ▶ Perfect co-ordination and manufacturing quality of all components, for example gears, plunger and bearings for long service life

▶ High cutting performance due to adjustable 4-stage pendulum action

Otherfeatures ▶ Free view of saw blade and cutting line ▶ Sawdust blower can be switched on / off ▶ Dust extraction equipment ▶ Exemplary running smoothness ▶ Comprehensive range of saw blades for every application


Stroke height 26 mm




Scope of supply ... 29E ... 29FCarrying case ✔ ✔

Saw blade ✔ ✔

Screwdriver ✔ ✔ 7

580W 2.4kg

Jigsaw GST80PBEProfessionalTheclassictool


▶ High cutting performance due to adjustable 4-stage pendulum action

Otherfeatures ▶ Stroke rate selection ▶ Free view of saw blade and cutting line ▶ Sawdust blower can be switched on / off ▶ Dust extraction equipment ▶ Exemplary running smoothness ▶ Comprehensive range of saw blades for every application


Stroke height 26 mm




Scope of supply ... 59FCarrying case ✔

Saw blade ✔

Screwdriver ✔


Saw

s

580W 2.4kg

Jigsaw GST85PBEProfessionalTheclassictool


▶ With Bosch SDS system for convenient changing of saw blades

Otherfeatures ▶ Free view of saw blade and cutting line ▶ Sawdust blower can be switched on / off ▶ Dust extraction equipment ▶ Exemplary running smoothness ▶ Comprehensive range of saw blades for every application


Stroke height 26 mm




Scope of supply ... 6031 anti-splinter guard ✔

3 saw blades ✔7

350W 1.6kg

FoamRubberCutter GSG300ProfessionalThespecialisttoolforsoftmaterials

▶ For millimetre-precision cutting of foam rubber, gummed horsehair and similar materials

▶ Low-vibration and low-noise running due to reciprocating saw blades ▶ Precise working due to exact saw blade guide

Otherfeatures ▶ Good handling, also for left-handers ▶ Wide range of saw blades for every application ▶ Saw blades and guide available as accessories


Cutting depth in foam rubber 300 mm

Rated speed 2100 rpm

Scope of supply ... 103Scraper (SP no. 2 601 030 010) ✔


Saw

s

1050W 3.6kg

Hand-heldCircularSaw GKS165ProfessionalThecompacttoolintheentrylevelclasswithlowweight

▶ Compact tool design at low weight for the best handling and fatigue-free working

▶ Robust design ▶ Good view of the cutting line and the saw blade from both sides

Otherfeatures ▶ External dust extraction via adapter for low level of dust when working ▶ Optimised wood chip deflector for better view of the work surface






Scope of supply ... 0K0Hex screw drive ✔

Parallel guide (2 608 000 322) ✔

Saw blade ✔

Wrench socket ✔ 7

1400W 4.1kg

Hand-heldCircularSaw GKS190ProfessionalThepowerfulandrobusttool

▶ Handy machine for circular saw work of all kinds in industry and in the trades

▶ Compact and lightweight ▶ For rip, cross and mitre cuts in wood and similar materials, mainly in free handling

Otherfeatures ▶ Spindle lock for easy changing of saw blades ▶ Infinitely variable setting of cutting depth ▶ Also suitable for left-handers






Scope of supply ... 0L0Allen key KW 5 ✔

Parallel guide ✔

Saw blade ✔

Vacuum adapter ✔


Saw

s

2100W 7.6kg

Hand-heldCircularSaw GKS235ProfessionalThemostpowerfultool

▶ High power performance for faster cutting progress ▶ Robust stamped steel base plate ▶ Closed anti-snag aluminium die-cast lower guard w/o riving knife for longer service life

Otherfeatures ▶ Optimised chip ejection system for cleaner material surface ▶ Blower function for a dust free cutting surface ▶ Ambidextrous lock-off switch on both sides of grip for more convenience ▶ Dual guided bevel setting for more stability ▶ Integrated groove in base plate for direct 90º cuts on guide rail ▶ Cord system with ball join for strain relief and longer service life of the cord






Scope of supply ... 0K0 ... 0L0Allen key KW 5 ✔ ✔

Parallel guide ✔ ✔

Saw blade ✔ ✔

Vacuum adapter ✔ ✔7

1100W 3.6kg

Sabresaw GSA1100EProfessionalTheconvenienttoolwiththefastestsawbladechanges

▶ Bosch SDS System for convenient and fast saw blade changing ▶ Highest power to weight ratio ▶ Fastest cutting in the widest variety of materials – optimised orbital action and SPM for most materials

Otherfeatures ▶ Easiest to use and most reliable blade change system ▶ Saw hook for easy convenient tool storage on the job site ▶ Adjustable foot with manual wrench adjustment to provide user convenience based application needs

▶ Stylish design – attractive yet durable, reliable, and comfortable for long term use

▶ Upfront lighting makes work area easier to see in most application environments

Technical dataOrder number 0 601 64C ...No-load stroke rate 0 - 2700 spm

Saw, stroke length 28 mm


Cutting depth in metal profiles and metal pipes 20 mm

Scope of supply ... 8L0Blade for metal ✔

Blade for wood ✔

Carrying case ✔


Saw

s

7

Bench-mounted Tools Robust and powerful.

Professionals expect reliability and high performance from

bench-mounted tools. The extremely powerful motors in the

professional blue bench-mounted tools from Bosch enable

fast sawing in every type of material. Whether metal pipes,

alu bars or wooden planks: the Bosch bench mounted tools

enable you to work on all different sizes of workpiece with

absolute efficiency.



Ben

ch-m

ount

edT

ools

8


Ben

ch-m

ount

edT

ools

1400W 15.0kg

SlidingMitreSaw GCM800SProfessionalTopclassinprecisionandcompactness

▶ Compact and lightweight (only 15 kg) for convenient transport to any construction site

▶ Precise working due to premium mitre scale and mitre detect system ▶ Powerful 1400 W motor for fast work progress

Otherfeatures ▶ Cutting widths up to 270 mm, cutting depths up to 60 mm ▶ Mitre angles up to 58° for all different kinds of applications ▶ Excellent dust extraction for a clean workplace ▶ Groove cuts can be performed ▶ Machine handle with softgrip for convenient handling

Technical dataOrder number 0 601 B16 ...Cutting capacity, 0° 60 x 270 mm

Cutting capacity, 45° mitre 60 x 190 mm

Cutting capacity, 45° incline 42 x 270 mm

Mitre setting 50 ° L / 58 ° R

Incline setting 47 ° L



Saw blade bore 30 mm

Scope of supply ... 1L0Dust bag (2 608 411 222) ✔

Insert plate (2 607 001 966) ✔

Saw blade 216 x 30 mm ✔

8

1800W 21.5kg

SlidingMitreSaw GCM10SProfessionalLargecuttingcapacityandhighestprecision

▶ Powerful 1800 W motor for the hardest of jobs ▶ Precise cuts due to parallel guidance of the slide function ▶ Up to 305 mm max. cutting width

Otherfeatures ▶ 87 mm max. cutting height for a wide variety of applications ▶ 52° left / 62° right mitre angle for various angle cuts ▶ Spindle lock for easy saw blade changes ▶ Swivelling saw head for inclined cuts up to 47° on the left ▶ Bench and stop made of high-quality die-cast aluminium





Incline setting 47 ° L




Scope of supply ... 542Dust bag (2 605 411 204) ✔

Dust extraction adapter (2 600 499 071) ✔

Insert plate (2 607 960 019) ✔

Quick-action clamp (2 608 040 205) ✔

Saw blade 254 x 30 mm ✔


Ben

ch-m

ount

edT

ools

2000W 13.8kg

MitreSaw GCM10MProfessionalMostpowerful2000Wmotoranddurablemultimaterialcuttingmitresawinclass

▶ Most powerful mitre saw for multimaterial cutting to get the job done easily ▶ Most durable mire saw build for longevity & valuable investment ▶ Highest precision cutting for excellent work results

Otherfeatures ▶ Including versatile saw blade for optimal multimaterial cutting ▶ Torsion spring carbon brush system with auto-stop function for the longest lifetime ▶ Strong arm and hinge for the tough usages ▶ Solid and compact base with rubber feet for stable and high precision cutting ▶ D-Handle with dimples for perfect grip in any condition ▶ Highly visible and easy to adjust bevel & mitre scale for accurate position








Scope of supply ... 1L0Dust bag (1 609 B00 840) ✔

Extension bars (2 607 001 978) ✔

Saw blade 254 x 25.4 mm ✔

Tilt protector (1 609 B00 797) ✔

Vertical clamp (1 609 B00 839) ✔

8

1800W 22.0kg

CombinationSaw GTM12ProfessionalTheall-rounderwith100%precision

▶ Laser and lamp for precise cuts ▶ Powerful 1800 W motor for fast working progress ▶ Mitre angles up to 48° for various cuts

Otherfeatures ▶ Machine handle with softgrip for comfortable operation ▶ On/Off-switch with softstart for smooth start of the machine ▶ 9 mitre detents for versatile applications and precise cuts ▶ Compact and lightweight (22 kg) ▶ Carrying handle for easy transportation (L/R) ▶ Precision parallel guide with easy “lock-system”

Technical dataOrder number 0 601 B15 ...Cutting capacity 73 x 78 x 34 mm




Max. mitre angle 48 ° L / 48 ° R

Max. bevel angle 47 ° L / 2 ° R

Max. cutting height (Table function) 51 mm

Bevel stops 48 °L

Scope of supply ... 040Dust bag (1 619 P03 478) ✔

Saw Blade 305 x 30mm ✔


Ben

ch-m

ount

edT

ools

2000W 15.8kg

MetalCut-offGrinder GCO2000ProfessionalThenewbenchmarkincuttingpowerandefficiency

▶ Durability – long service life ▶ Well balanced and lower weight (15.8 kg for non-guard version) ▶ Convenience – well balanced and ergonomic

Otherfeatures ▶ Strong aluminium arm and pivot system for heavy-duty cut in steel ▶ Ergonomic round D-handle with dimples for long periods of use ▶ Anti-dust and -spark motor system for longer lifespan ▶ Robust guard system for minimal wobbling during cut ▶ Adjustable spark guard for minimal spark deflection when cutting different shapes of material

Technical dataOrder number 0 601 B17 ...Cutting capacity, rectangle 85 x 180 mm

Cutting capacity, square 120 x 120 mm

Cutting capacity, L-profile 138 x 138 mm


Grinding disc diameter 355 mm

Grinding bore diameter 25.4 mm

Scope of supply ... 0L0Cutting disc ✔

8


Ben

ch-m

ount

edT

ools

8

Dust Extractors, Glue Guns, Heat Guns Useful tools for a wide range ofapplications.

Sanding inevitably produces dirt and dust. But the compact

extractors from Bosch prevent this. Whether dry or wet, from

wood dust through to fi ne concrete dust – the Plus-clean

filter system ensures clean fi lters, full suction force and a

clean work environment.

Bosch also has the right tools for installations and repairs.

Heat guns with accurate, continuously variable temperature

control and glue guns prove their worth with the accustomed

level of quality offered by Bosch tools.

Fast paint stripping: due to the special surface nozzles, the Heat Gun GHG 660LCD Professional quickly removes even thick layers of paint from surfaces.

For relentless suction force: the electromagnetic filter cleaning system Plus-cleanensures that the filters in the Bosch Dust Extractors remain clean.



Dus

tExt

ract

ors,

Glu

eG

uns,

Hea

tGun

s

9


Dus

tExt

ract

ors,

Glu

eG

uns,

Hea

tGun

s

900W 6.3kg

AllPurposeExtractor GAS11-21ProfessionalThecompact,on-sitedustextractor

▶ Easy transportation and loading due to the particularly compact design ▶ Robust and powerful dust extractor ▶ Compact and impact resistant

Otherfeatures ▶ Non-rusting 21 litre container ▶ Sturdy permanent fabric filter ▶ Snap lock hose system

Technical dataOrder number 0 601 97A ...Container volume, gross 21 l

Max. airflow 50 l/sec

Max. ventilating pressure 150 mbar

Scope of supply ... 006Air hose 3 m (2 607 002 149) ✔

Crevice nozzle ✔

Dust box (SP no. 1 609 203 D29) ✔

Suction brush ✔

Suction nozzle ✔

Suction pipe (SP no. 1 609 203 B92) ✔

9

820W 1.8kg

BlowerwithDustExtraction GBL800EProfessionalThehandytoolforblowinganddustextraction

▶ Strongest air flow for better work efficiency ▶ Highest air flow volume ▶ Powerful motor

Otherfeatures ▶ Variable speed dial wheel for easy flow speed adjustment ▶ Ambidextrous lock on and handgrip design suitable for left/right handed users

▶ Easiest and most convenient fixing of nozzle & dust bag


Volumetric flow rate 4.5 m3/min

Scope of supply ... 4L0Dust bag ✔

Nozzle ✔


Dus

tExt

ract

ors,

Glu

eG

uns,

Hea

tGun

s

500W 0.4kg

GlueGun GKP200CEProfessionalGluegunwithelectronicallycontrolledtemperature

▶ Electronically controlled heating elements for rapid standby and constant working temperature

▶ Mechanical feed ▶ Cable-free working possible

Otherfeatures ▶ Long, removable cable ▶ Replaceable nozzles ▶ LED display for mains connection ▶ Suitable for left-handers

Technical dataOrder number 0 601 950 ...Length 205 mm

Height 175 mm

Gluing capacity 30 g/min

Heat-up time 4 mins

Heating elements, number 2 Steel

Glue stick diameter 11 mm

Glue stick length, max. 200 mm


Extra-long nozzle (SP no. 1 609 202 428) ✔

Removable cable 3.5 m ✔

Universal nozzle (SP no. 1 609 201 241) ✔

Wide-slot nozzle (SP no. 1 609 202 555) ✔

8 glue sticks 200 mm ✔

9

1800W 0.8kg

HeatGun GHG600-3ProfessionalTheheatgunwiththegreatesteaseofuse

▶ Two main applications can be stored permanently, so that airflow and temperature are at the correct setting instantly

▶ Heating automatically switches off and cools when overheating, for long lifetime

▶ Removable protective pipe

Otherfeatures ▶ 2-stage switch for one-handed operation ▶ Stationary working position also possible ▶ Two air flow and temperature stages ▶ Thermal protection

Technical dataOrder number 0 601 94B ...Length 255 mm

Height 255 mm

Working temperature 50 - 600 °C

Infinitely variable temperature control ✔

Scope of supply ... 006– –


Dus

tExt

ract

ors,

Glu

eG

uns,

Hea

tGun

s

2000W 0.9kg

HeatGun GHG630DCEProfessionalTheheatgunwiththegreatesteaseofuse

▶ Heating automatically switches off and cools when overheating, for long service life

▶ Three working temperature settings ▶ Airflow and temperature control in steps of ten for precise working

Otherfeatures ▶ 50°C cold setting ▶ Ergonomic design/softgrip

Technical dataOrder number 0 601 94C ...Working temperature 50 - 630 °C

Airflow 150 - 500 l/min

Infinitely variable temperature control ✔


9


Dus

tExt

ract

ors,

Glu

eG

uns,

Hea

tGun

s

9

Digital Measuring Tools Precision at the push of a button.

Precision is paramount when working on foundations, bare

brickwork and interiors. Whether levelling, laser

rangefinding, detection, or angle and incline measurement –

Bosch offers you the right solution in every construction

phase with the professional blue measuring tools. In

addition to precision and robustness, all measuring tools

from Bosch share one fundamental feature: they are

operated simply at the push of a button.



Dig

ital

Mea

suri

ngT

ools

10


Dig

ital

Mea

suri

ngT

ools

1.8kg

RotationLaser GRL150HVSetProfessionalEasytooperatewithhorizontalandverticalself-levelling

▶ Easy to operate thanks to single-button function and self-explanatory display ▶ Quickly settable in horizontal and vertical use due to automatic self-levelling (±5°) ▶ Safe working thanks to shock warning function in the event of shocks

Otherfeatures ▶ Set comes complete with laser receiver for accurate alignment ▶ Point line and rotation modes for optimum visibility ▶ High accuracy of 0.1 mm/m ▶ High level of robustness: fully functional, even after being dropped from a height of 1 m

▶ Dust and splash protection IP 54

Technical dataOrder number 0 601 015 ...Working range 30 m

Working range with receiver 150 m

Levelling accuracy 0.1 mm/m

Self-levelling range ± 8 % (± 5°)

Dust and splash protection IP 54

Rotation speed 150, 300, 600 rpm

Tripod connection 5/8

Power supply 4 x 1.5 V LR20 (D)

Weight 1.8 kg

Scope of supply ... 303Carrying case ✔

Laser goggles ✔

Laser receiver LR 1 Professional (0 601 015 400) ✔

Target plate ✔

10

1.3kg

RotationLaser GR240ProfessionalTheeasiestcut&fillsolutionwithRotationLaserLevel

▶ Cut (red coded area): if the ground is too high and material has to be removed

▶ Fill (silver area): if the ground is too low and material has to be added ▶ Circular vial for easy height adjustment

Otherfeatures ▶ Holder for fixing the receiver at the zero point ▶ Spirit level for precise alignment of the GR 240 ▶ Foot clamp for higher stability


Weight 1.3 kg



Dig

ital

Mea

suri

ngT

ools

0.25kg

LineLaser GLL2ProfessionalThemostcompactcrosslinelaserforprofessionals

▶ Small, lightweight, always within reach ▶ Easy handling due to single-button operation ▶ For flexible use: with multifunctional mount for versatile fixing possibilities

Otherfeatures ▶ Good visibility: min. 10 m (depending on ambient brightness) ▶ Professional levelling precision: 0.3 mm/m



Self-levelling range ± 4°

Laser class 2

Dust and splash protection IP 5X

Power supply 3 x 1.5 V LR6 (AA)

Scope of supply ... 700Batteries 3 x 1,5 V (AA) ✔

Multi-function mount (1600A000J3) ✔

Protective pouch ✔

New!

10

0.68kg

LineLaser GLL2-80PProfessionalLevellingin2x360°–Fasterandeasierthanever

▶ High work efficiency: simultaneous performance of horizontal and vertical levelling applications in the entire room with only one tool

▶ Large working range: precise work in a diameter of up to 80 m using the LR 2 Professional Receiver

▶ Easy handling: self-levelling up to 4° within 4 seconds, compact design



Self-levelling range ± 4°

Laser class 2


Tripod connection 1/4˝, 5/8˝

Power supply 4 x 1.5 V (AA)

Scope of supply ... 201Batteries 4 x 1,5 V (AA) ✔

Magnet target plate ✔


Tripod BS 150 (0 601 096 974) ✔


Dig

ital

Mea

suri

ngT

ools

2.5kg

LineLaser BT350ProfessionalEasytooperateandrobustforlineandpointlaserlevel

▶ Easy and fast fitting ▶ High level of versatility due to holder and metal bracket ▶ Robust and stable aluminum construction

Otherfeatures ▶ Easy fixing of line and point laser levels ▶ Ideal also in combination with the Universal Holder BM 1 Professional


Scope of supply ... B00Clamp (2 600 499 075) ✔

10

0.25kg

PointLaser GPL5ProfessionalFiveprecisepoints,quicklyaligned

▶ Self-levelling horizontal and vertical pendulum point laser for indoor and outdoor work

▶ High visibility of the laser points with a working range of 30 m ▶ Extremely precise in use with an accuracy of ±3 mm at a distance of 10 m

Otherfeatures ▶ Horizontal, and cross-line mode ▶ Light weight and highly compact size ▶ Multifunctional wall mount



Dust and splash protection IP 5X

Tripod connection 1/4

Scope of supply ... 200Protective bag ✔

Wall mount ✔

3 x 1.5 V batteries ✔


Dig

ital

Mea

suri

ngT

ools

0.5kg

LineLaser GTL3ProfessionalFasttilelayingduetoadditionallineat45°

▶ In addition to the two laser lines at a 90° angle, it projects a third line at 45° for precise and fast alignment and laying of wall and floor tiles

▶ High accuracy of 0.2 mm/m ▶ Compact and lightweight design for optimum ease of use

Otherfeatures ▶ Metal plate for better stability when working on uneven ground and for fixing to the wall

▶ Clearly visible laser lines for indoor use ▶ Extremely robust: fully functional, even after being dropped from a height of 1 m onto concrete. Also dust and splash-protected (IP54)

▶ Automatic shutdown to reduce battery consumption

Technical dataOrder number 0 601 015 ...Levelling accuracy 0.2 mm/m

Laser class 2


Tripod connection 1/4˝, 5/8˝


Scope of supply ... 200Alignment disc (SP no. 1 609 203 U23) ✔

Batteries 4 x 1,5 V (AA) ✔


10

1.0kg

BuildingTripod BS150ProfessionalAbsolutelysecurestanceonanyfloor

▶ Robust aluminium design ▶ For working heights from 52 to 147 cm ▶ Functionality and precision due to box level

Otherfeatures ▶ Optimised working with line and point laser level ▶ Good transportability due to low weight

Technical dataOrder number 0 601 096 ...Work height 52 - 147 cm

Transport dimensions 52 cm


GRL 150 HV


Dig

ital

Mea

suri

ngT

ools

4.1kg

BuildingTripod BT160ProfessionalLightweightaluminumtripod

▶ Light aluminum construction with Double banded legs for high stability ▶ Optimized working with line, point laser level and optical level ▶ Locking clamps for quick adjustment of height and fast disassembling

Otherfeatures ▶ Good transportability due to low weight and shoulder strap ▶ Removable rubber base (e.g. protection of indoor floor)

Technical dataOrder number 0 601 091 ...Work height 0.97 - 1.6 cm


10

5.5kg

BuildingTripod BT170HDProfessionalAbsolutelysecurestanceonanyfloor

▶ Heavy aluminum construction with Double banded legs for higher stability ▶ Optimized working with line, point, rotation laser level and optical level ▶ Locking clamps for quick adjustment of height and fast disassembling

Otherfeatures ▶ Shoulder strap for easy transportation ▶ Removable rubber base (e.g. protection of indoor floor)

Technical dataOrder number 0 601 091 ...Work height 1.07 - 1.65 cm



Dig

ital

Mea

suri

ngT

ools

0.18kg

Rangefinder DLE40ProfessionalPrecisemeasurements–smallandeasy!

▶ State-of-the-art laser technology for precise measurement up to 40 m ▶ Fits in any shirt pocket due to small dimensions of 100 x 58 x 32 mm ▶ Easy operation: one button-one function keypad

Otherfeatures ▶ Ideal tool for every construction site because it is dust and splash-protected (IP 54) and it is equipped with softgrip

▶ Other functions such as continuous measurement, addition and subtraction function for considerable time-saving

Technical dataOrder number 0 601 016 ...Measurement range 0.05 - 40 m

Measurement accuracy, typical ± 1.5 mm

Laser class 2

Units of measurement m or ft

Power supply 4 x 1.5 V LR03 (AAA)

Scope of supply ... 370Protective bag ✔


10

0.175kg

Rangefinder DLE50ProfessionalThesmallestlaserrangefinderintheworld

▶ Impressive because it is extremely precise and similar in size to a mobile phone

▶ Easy-to-operate and precise measurement of lengths, areas and volumes ▶ Absolute accuracy thanks to state-of-the-art laser technology up to a range of 50 m

Otherfeatures ▶ With the measuring pin, measurements can also be performed from hard-to-reach areas

▶ Wide range of practical functions, such as indirect length measurement, continuous measurement, addition and subtraction function or memory

▶ Easy, self-explanatory operation with clear display ▶ 1/4˝ tripod support ▶ Softgrip



Laser class 2



Scope of supply ... 010Hand strap ✔

Protective bag (SP no. 1 609 203 R94) ✔



Dig

ital

Mea

suri

ngT

ools

0.18kg

Rangefinder DLE70ProfessionalPreciseworkisnowdoneuptotentimesfaster

▶ Lengths are measured up to ten times faster due to wall-area, minimum and maximum functions

▶ State-of-the-art laser technology for precise measurement up to 70 m ▶ Fits in any shirt pocket due to small dimensions of 100 x 59 x 32 mm

Otherfeatures ▶ User-friendly operation thanks to self-explanatory buttons and a concise display

▶ Ideal tool for every construction site because it is dust and splash-protected (IP 54) and it is equipped with softgrip

▶ Sturdy metal measurement pin for measuring from corners and hard-to-reach areas

▶ Other functions such as continuous measurement, indirect length measurement, addition and subtraction function for considerable time-saving

▶ 1/4˝ tripod thread for convenient use with Building Tripod BS 150 Professional



Laser class 2



Scope of supply ... 670Hand strap (SP no. 1 609 203 R97) ✔

Protective bag (SP no. 1 609 203 X26) ✔


10

0.24kg

Rangefinder GLM250VFProfessionalThelaserrangefinderwiththelongestrange

▶ Ideal for outdoor use: integrated telescopic viewfinder for optimum visibility of the laser point up to a distance of 250 m

▶ Maximum measurement performance and precision, even in adverse lighting conditions, due to large glass lens and ceramic optics carrier

▶ Numerous combined measurement functions for quick and precise calculation of distances, areas and volumes

Otherfeatures ▶ Memory capacity to store 30 values


Measurement accuracy, typical ± 1 mm

Laser class 2



Scope of supply ... 170Carrying strap ✔




Dig

ital

Mea

suri

ngT

ools

0.4kg

Rangefinder DLE150ProfessionalPrecisionwithlaserupto150m

▶ Easy-to-operate measurement of lengths, areas and volumes ▶ Range of up to 150 m ▶ Easy, self-explanatory operation with clear display

Otherfeatures ▶ Wide range of practical functions, such as indirect length measurement, continuous measurement, minimum/maximum function, addition and subtraction function or memory

▶ Measurements can be taken from surfaces, edges and corners with the universal end piece

▶ Attachable vial for easy, horizontal alignment ▶ 1/4˝ tripod support


Measurement accuracy, typical ± 2 mm

Laser class 2



Scope of supply ... 342Compact end piece (SP no. 1 609 203 E07) ✔

Protective case (SP no. 1 609 203 E00) ✔

Universal end piece (SP no. 1 609 203 E05) ✔

Vial (SP no. 1 609 203 E10) ✔


10

0.27kg

Detector GMS120ProfessionalThemostreliablemulti-detectorinitsclass

▶ Maximum reliability: all objects are found and application errors are avoided due to the automatic calibration

▶ Reliable detection even of deep-lying objects – up to a depth of 12 cm ▶ Even more reliable detection of objects due to three-colour LED luminous ring

Otherfeatures ▶ Pinpoint indication of the object’s centre with the “Center Finder” scale ▶ Better visibility of the result due to illuminated display ▶ Marking hole with LED luminous ring

Technical dataOrder number 0 601 081 ...Detectable materials Electrical cables, metals,

wooden substructuresMax. measurement depth 120 mm

Automatic deactivation facility, approx. 5 min

Power supply 1 x 9 V 6LR61

Scope of supply ... 000Battery 1 x 9V ✔

Hand strap ✔


New!


Dig

ital

Mea

suri

ngT

ools

0.8kg

Detector WallscannerD-tect100ProfessionalMaximumsafetywhendrilling

▶ The Bosch Wallscanner D-tect 100 Professional locates objects up to a depth of 100 mm with extremely high precision. Detectable materials are: ferrous and non-ferrous metals, electric cables, wood and even plastic

▶ All detected objects are accurately shown on the graphic display with the maximum permitted drilling depth

▶ Offers an extremely high degree of safety when drilling due to its unique technology

Otherfeatures ▶ The highest precision and absolute reliability, identical results even with repeated measurements

▶ Concise and easy-to-understand display with easy operator guidance ▶ Sturdy and durable design for use on building sites

Technical dataOrder number 0 601 095 ...Detectable materials Plastic pipes, cables of all

kinds, ferrous/non-ferrous metals, wood, cavities

Max. measurement depth 100 mm

Accuracy ± 5 mm

Unit of measurement cm

Automatic deactivation facility, approx. 5 min


Scope of supply ... 003Protective case (SP no. 1 609 203 D42) ✔


10

1.1kg

AngleMeasurer DWM40LProfessionalExtremelyaccurateanglecalculation

▶ Faster, more precise and more efficient calculation of angles ▶ Precise transfer of the angles onto workpieces ▶ The greatest accuracy over the long term due to the integrated, wear-free and temperature-independent Bosch Precision Angle Sensor

Otherfeatures ▶ 2 easy-to-read displays on the front and back ▶ No calibration required ▶ Hold function to hold measurement results at the push of a button ▶ Sturdy & compact

Technical dataOrder number 0 601 096 ...Measurement range 0 – 220°

Measurement accuracy, angles ± 0.1° = ± 1.8 mm/m

Measurement accuracy, vials ± 0.057° = ± 1 mm/m

Staple length 40 cm

Automatic deactivation facility, approx. 5 mins


Scope of supply ... 6034 x 1.5 V batteries ✔


Dig

ital

Mea

suri

ngT

ools

0.7kg

DigitalInclinometer DNM60LProfessionalSturdyinclinometer

▶ Measures angles in ° and inclines in % or mm/m ▶ Direction arrows display the deviation to the horizontal or vertical ▶ Robust due to aluminium housing

Otherfeatures ▶ Automatic rotation of the measured values on the display when working overhead

▶ Acoustic signal at 0° and 90° ▶ Hold function to hold measurement results at the push of a button ▶ Copy function for copying inclines and transferring them to another position ▶ Slanted, easy-to-read display ▶ 2 vials enable use as a spirit level ▶ More carrying comfort and safety due to shoulder bag

Technical dataOrder number 0 603 096 ...Measurement range 0 – 360° (4 x 90°)

Electronics measurement accuracy 0°/90° ± 0.05°

Electronics measurement accuracy at 1°-89° ± 0.2°

Measurement accuracy, vials ± 0.057° = ± 1 mm/m

Automatic deactivation facility, approx. 5 mins

Operating duration, approx. 200 h

Power supply 1 x 9 V 6LR61

Scope of supply ... 105Protective bag (SP no. 1 609 203 R95) ✔

1 x 9 V battery ✔

10

1.7kg

Opticallevel GOL26DProfessionalExtremelyrobustforoutdooruse

▶ Designed for outdoor use due to sturdy metal housing with dust and splash protection (IP54)

▶ Robust design with built-in target collimator and integrated circular vial ▶ Carrying case with compensator lock for safe transport

Otherfeatures ▶ Target collimator for rough alignment ▶ Penta prism makes it easy to read the circular vial ▶ Large focusing knob for easy alignment ▶ Fast aperture for a sharp image of the target (measuring rod) ▶ High precision (1.6 mm/30 m) over long distances ▶ Endless degree setting using knobs on both sides with friction-braked rotation

▶ Erect image

Technical dataOrder number 0 601 068 ...Magnification 26x

Working range 100 m

Levelling accuracy ± 0.2 mm/m

Tripod thread 5/8˝

Weight 1.7 kg

Scope of supply ... 000Adjusting pin ✔

Allen key ✔

Carrying case ✔

Lens cover ✔

Plumb bob ✔


Dig

ital

Mea

suri

ngT

ools

1.98kg

Opticallevel GR500ProfessionalTheeasiestlevellingsolutionwithOpticalLevel

▶ Easy Button for assembling and disassembling of the rod ▶ Removable spirit level ▶ Bag for protection and easy transportation

Otherfeatures ▶ Additional scale at the back side (in mm); for instance measuring the depth of a hole or the height under the bridge

▶ Metric dimensions (E-scale) for use with the optical level


Weight 1.98 kg

Scope of supply ... 300Carrying case ✔

10

Universalholder BM1ProfessionalTheuniversalsolutionforlineandpointlaserlevels

▶ Flexible fitting of the holder, for example with screws, magnets or on a tripod ▶ Can be used as a floor tripod with extendable supporting legs ▶ Height adjustment with locking device for safe and precise alignment

Otherfeatures ▶ Easy fixing of the laser level ▶ Ideal also in combination with the Telescopic Pole BT 350 Professional

Technical dataOrder number 0 601 015 ...Tripod connection 0.538

Scope of supply ... A00– –


Dig

ital

Mea

suri

ngT

ools

0.36kg

RotationLaser LR1ProfessionalHandyreceiverforindoorsandoutdoorsforrangesofupto150mincombinationwithRotationLaserLevelGRL150HVProfessional

▶ More benefit thanks to accessories ▶ Optical and acoustic alignment of the laser beam level ▶ Dust and splash protection (IP54)

Otherfeatures ▶ Top-mounted magnets for better fixing



Power supply 1 x 9 V

Scope of supply ... 4001 x 9 V battery ✔

10

0.2kg

LineLaser LR2ProfessionalHandyreceiverforindoorsandoutdoorsforrangesofupto50mincombinationwiththeGLL2-50,GLL2-80PProfessional

▶ More benefit thanks to accessories ▶ Alignment of the laser beam level, optical (display and LEDs) and acoustic, for working in various lighting conditions

▶ Top-mounted magnets for better fixing

Otherfeatures ▶ Dust and splash protection (IP 54)



Power supply 1 x 9 V

Scope of supply ... 1001 x 9 V battery ✔


Page Product name Order number Page Product name Order number B

112 BM 1 Professional 0601015A00 105 BS 150 Professional 0601096974 106 BT 160 Professional 0601091200 106 BT 170 HD Professional 0601091300 104 BT 350 Professional 0601015B00

D 109 DLE 150 Professional 0601098342 107 DLE 40 Professional 0601016370 107 DLE 50 Professional 0601016010 108 DLE 70 Professional 0601016670 111 DNM 60 L Professional 0603096105 110 DWM 40 L Professional 0601096603

GA 96 GAS 11-21 Professional 060197A006

GB 44 GBH 2-18 RE Professional 06112583L1 44 GBH 2-22 E Professional 0611250606 45 GBH 2-22 RE Professional 0611250704 45 GBH 2-22 RE Professional 0611250706 45 GBH 2-23 RE Professional 06112504L0 48 GBH 2-23 REA Professional 0611250570 46 GBH 2-26 DFR Professional 061125476A 47 GBH 2-26 DRE Professional 0611253706 47 GBH 2-26 DRE Professional 0611253704 46 GBH 2-26 RE Professional 0611251706 46 GBH 2-26 RE Professional 0611251704 31 GBH 24 V Professional 0611256252 47 GBH 3-28 DFR Professional 061124A0L0 22 GBH 36 V-LI Professional 0611900R02 22 GBH 36 V-LI Professional 0611900R72 22 GBH 36 V-LI Compact Professional 0611903R71 48 GBH 4-32 DFR Professional 0611332171 49 GBH 5-38 D Professional 0611240006 49 GBH 7-46 DE Professional 0611263706 96 GBL 800 E Professional 06019804L0 37 GBM 10 RE Professional 06014735L0 38 GBM 13 HRE Professional 0601049603 38 GBM 13 RE Professional 06014775L0 39 GBM 13-2 Professional 0601169037 39 GBM 13-2 Professional 0601169006 39 GBM 16-2 RE Professional 0601120542 40 GBM 32-4 Professional 0601130242 37 GBM 6 RE Professional 06014725L0 78 GBS 75 A Professional 0601274004

GC 91 GCM 10 M Professional 0601B201L0 90 GCM 10 S Professional 0601B20542 90 GCM 800 S Professional 0601B161L0 92 GCO 2000 Professional 0601B170L0

GD 60 GDM 12-34 Professional 060136A1L0 60 GDM 13-34 Professional 060136A2L0 20 GDR 10,8-LI Professional 06019A69L0 21 GDR 1080-LI Professional 06019B39L0 30 GDR 12 V Professional 0601909504 30 GDR 12 V Professional 0601909506 21 GDR 1440-LI Professional 06019B34L0 30 GDS 12 V Professional 0601909K71

GE 76 GEX 125-1 A Professional 06013870L0 76 GEX 125-1 AE Professional 06013875L0

GG 71 GGS 27 Professional 0601210006 71 GGS 27 L Professional 0601215006 72 GGS 6 Professional 0601214042

GH 97 GHG 600-3 Professional 060194B006 98 GHG 630 DCE Professional 060194C706 79 GHO 10-82 Professional 0601594006

GK 97 GKP 200 CE Professional 0601950703 85 GKS 165 Professional 06015220K0 85 GKS 190 Professional 06016230L0 86 GKS 235 Professional 060157A0K0 86 GKS 235 Professional 060157A0L0

GL 103 GLL 2 Professional 0601063700 103 GLL 2-80 P Professional 0601063201 108 GLM 250 VF Professional 0601072170

GM 78 GMR 1 Professional 060160A0L0 109 GMS 120 Professional 0601081000

GN 73 GNA 2,0 Professional 0601530142

GO 111 GOL 26 D Professional 0601068000 23 GOP 10,8 V-LI Professional 06018580L0

GP 104 GPL 5 Professional 0601066200 68 GPO 12 CE Professional 06013890L0 69 GPO 14 E Professional 0601366678

GR 102 GR 240 Professional 0601094100 112 GR 500 Professional 0601094300 102 GRL 150 HV Set Professional 0601015303 40 GRW 11 E Professional 0601940742

GS 86 GSA 1100 E Professional 060164C8L0 34 GSB 10 RE Professional 06012161L0 34 GSB 10 RE Professional 06012161L2 35 GSB 13 RE Professional 06012171L0 19 GSB 14,4-2-LI Professional 06019A54L0 35 GSB 16 RE Professional 06012181L1 20 GSB 18-2-LI Professional 06019A53L0 36 GSB 20-2 Professional 0601184206 36 GSB 20-2 RE Professional 0601184606 34 GSB 500 RE Professional 06011A01L0 73 GSC 2,8 Professional 0601506142 84 GSG 300 Professional 0601575103 51 GSH 11 E Professional 0611316706 51 GSH 11 E Professional 0611316703 52 GSH 16-30 Professional 0611335100 52 GSH 16-30 Professional 06113351L0 52 GSH 27 Professional 0611304142 52 GSH 27 Professional 0611304103 50 GSH 3 E Professional 0611320703 50 GSH 388 Professional 0611388004 50 GSH 388 Professional 0611388006 51 GSH 5 CE Professional 06113210L0 72 GSM 200 Professional 0601277103 16 GSR ProDrive Professional 06019A20L1 18 GSR 1080-LI Professional 06019A89L0 17 GSR 10,8-2-LI Professional 06018681L0 29 GSR 12-2 Professional 0601918JL0 18 GSR 1440-LI Professional 06019A84L0 29 GSR 14,4-2 Professional 0601918GL0 19 GSR 14,4-2-LI Professional 06019A44L0 41 GSR 6-25 TE Professional 0601441300 41 GSR 6-45 TE Professional 0601440300 28 GSR 7,2-2 Professional 0601918NL0

ToolIndex


Page Product name Order numberGS

28 GSR 9,6-2 Professional 0601918LL0 77 GSS 230 Professional 06010700L0 77 GSS 280 A Professional 0601293006 77 GSS 280 A Professional 0601293003 82 GST 65 Professional 06015091L0 82 GST 65 E Professional 06015092L0 83 GST 80 PB Professional 060158129F 83 GST 80 PB Professional 060158129E 83 GST 80 PBE Professional 060158159F 84 GST 85 PBE Professional 0601587603

GT 105 GTL 3 Professional 0601015200 91 GTM 12 Professional 0601B15040

GW 17 GWI 10,8 V-LI Professional 0601360UB0 67 GWS 11-125 CI Professional 0601822200 67 GWS 11-125 CI Professional 0601822240 67 GWS 14-125 CI Professional 0601824200 68 GWS 14-150 CI Professional 0601826200 69 GWS 20-180 Professional 0601849106 69 GWS 20-180 Professional 0601849104 70 GWS 20-230 Professional 0601850106 70 GWS 22-180 Professional 0601881AL0 64 GWS 6-100 Professional 0601375026 64 GWS 6-100 Professional 0601375006 64 GWS 6-100 Professional 0601375083 64 GWS 7-100 Professional 06013880L0 65 GWS 7-100 ET Professional 06013885L0 65 GWS 7-100 T Professional 06013886L0 66 GWS 8-100 C Professional 0601377606 66 GWS 8-100 CE Professional 0601378606

I 16 IXO 3 Professional 06019602L0

L 113 LR 1 Professional 0601015400 113 LR 2 Professional 0601069100

W 110 Wallscanner D-tect 100 Professional 0601095003


AuthorisiedServiceCenters

AlorStarTK Jaya Auto Elektrik 60, Rumah Kedai Perumahan Awam Mergong, Jalan Sepat 1, 05150 Alor Star, KedahTel 04-7309867 Fax 04-7344550H/P 012-4229867

ButterworthChan Yee Auto Electricals Service 6323, Jalan Kampung Paya, 12200 Butterworth, Pulau PinangTel 04-3328496 Fax 04-3237760H/P 016-4487799

IpohEng Soon Electric Trading Co. No. 235, Jalan Bercham, Taman Desa Kencana, 31400 Ipoh, PerakTel 05-5469487 Fax 05-5469487H/P 019-5565820

SarawakCMW Engineering Corporation Sdn. Bhd. No. 10, Lot 1549, Block 10 KTLD, 2 1/2 Miles Rock Road, 93250 Kuching, SarawakTel 082-420141 Fax 082-411335

SabahCMW Engineering (Sabah) Sdn. Bhd. Lot No. 9 Likas Realty, Mile 5/12, Taman Road, Likas Kota Kinabalu, 89357 Sabah Malaysia.Tel 088-389922

KotaBharuSyarikat Chang Trading 3566H&I, Jalan Sultanah Zainab, 15050 Kota Bharu, KelantanTel 09-7484237 Fax 09-7449671H/P 012-9086363

KualaLumpur(North)Forever Tools & Machinery Services No. 24, Jalan Chenderuh 2, Off Jalan Ipoh, Batu 4/14, 51200 Kuala LumpurTel 03-62529918 Fax 03-62528918

KualaLumpur(South)SEP Engineering Sdn. Bhd. No. 3, Jalan SP2/9, Taman Serdang Perdana, Seksyen 2, 43300 Seri Kembangan, Selangor D.E.Tel 03-89457512/13 Fax 03-89457517

PulauPinangHupp Shun Trading No. 26, Ground Floor, Jalan Sungkai, 10460 Pulau PinangTel 04-2821905

SerembanJualan Dan Servis Elektrik Foong Seng. 305, Taman Megaway, Jalan Sikamat, 70400 Seremban, Negeri SembilanTel 06-7672944 Fax 06-7672944

JohorBahruVinco Power Tools Services 7, Jalan Teratai 10, Taman Johor Jaya, 81100 Johor Bahru, JohorTel 07-3532433 Fax 07-3577621H/P 019-7707621

KlangMeng Tat Machinery Service 181, Batu 1 1/4, Off Jalan Kapar, 41400 Klang, SelangorTel 03-33430951 Fax 03-33444419H/P 012-2996423

KluangHeng Lee Fuel Pump Service Sdn. Bhd. 2, Jalan Dato Suleiman Mohd Noor, Kluang Baru, 86000 Kluang, JohorTel 07-7723870 Fax 07-7722712

KualaTerengganuSyarikat Perniagaan Hong Sang 31-C, Jalan Bukit Kecil, 21100 Kuala Terengganu, TerengganuTel 09-6228559 Fax 09-6234470

KuantanKim Heng Motor Electrical Service 30, Kawasan Perindustrian Batu 3, Jalan Gambang, 25150 Kuantan, Pahang Darul MakmurTel 09-5135662 Fax 09-5142430

MelakaAnn Tat Trading 367-C, Jalan Melor 2, Taman Peringgit Jaya, 75400 MelakaTel 06-2841878 Fax 06-2841878

WESTMALAYSIA

EASTMALAYSIA

Professional Blue Power Tools For Trade & IndustryRange for 2011/2012

Bosch Customer Care TeamTelephone 1 800 880 188

Competent answers to all your queries: The Bosch Customer Care Team answersall your queries concerning the use of power tools from Bosch – quickly and in acustomer-friendly manner.

More information about Bosch Power Tools

www.bosch-pt.com.my

Top quality

Robert Bosch Sdn Bhd(220975-V)

No. 8A Jalan 13/646200 Petaling JavaSelangor Darul Ehsan, Malaysia.

Tel: (603) 7966 3000Fax: (603) 7958 3838

www.bosch-pt.com.my

The protection of nature and workers‘ health as well as their safety has been part of Bosch group policy since 1973. Bosch

continuously develops technologies that are not only innovative but also environmental friendly. By introducing the first Lithium

Cordless tools, Bosch actively contribute to the protection of the Environment. Compared with NiCd batteries, Lithium-Ion

batteries contain around 70% fewer heavy metals and produce around 40% fewer CO2 emissions over a lifetime of ten years per

battery pack.

Country specific information:

Catalogue-Order No. 1619B002BA · Kittelberger

Subject to technical alterations · No liability is accepted for printing errors


bosch malaysia power tools 2011

Documents