sony lty[z]460hb01 app000

7/28/2019 Sony Lty[z]460hb01 App000

1/31

1 / 31age5-000-S-070907oc. NoTY[Z]460HB01ODEL

Customer : SONY DATE : 07 Sep. 2007

DATESIGNATURE

CustomerCustomers Approvals Approval

DATE

07 Sep,2007

DATE

07 Sep,2007

PREPARED BY

APPROVAED BY

Any Modification of Specification is not allowed without SEC's Permission.

NOTE :

ApprovalApproval

SAMSUNG TFT-LCD

MODEL : LTY[Z]460HB01

SAMSUNG TFTSAMSUNG TFT--LCDLCD

MODELMODEL : LTY[Z]460HB01: LTY[Z]460HB01

SL Development Team, LCD BusinessSamsung Electronics Co . , LTD.

7/28/2019 Sony Lty[z]460hb01 App000

2/31


Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------------- (9)3.1 TFT LCD Module3.2 Back Light Unit

4. Block Diagram ------------------------------------------------------------------------------------------- (11)

5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)5.1 Input Signal & Power5.2 Balance Board5.3 LVDS Interface5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing ---------------------------------------------------------------------------------------- (20)6.1 Timing Parameters (DE only mode)6.2 Timing Diagrams of interface Signal (DE only mode)6.3 Power ON/OFF Sequence

7. Outline Dimension -------------------------------------------------------------------------------------- (23)

8. EMI Specification --------------------------------------------------------------------------------------- (25)

9. Spread Spectrum Specification

10. UL Approval

11. Reliability Test ----------------------------------------------------------------------------------------- (26)

12. Packing ------------------------------------------------------------------------------------------------ (27)

13. Marking &Others ------------------------------------------------------------------------------------- (28)

14. General Precaution ---------------------------------------------------------------------------------- (29)14.1 Handling14.2 Storage14.3 Operation14.4 Operation Condition Guide14.5 Others

7/28/2019 Sony Lty[z]460hb01 App000

3/31


* Revision History

First Issued-000

Sep.

07,

2007

SummaryPageRev.

No

Date

7/28/2019 Sony Lty[z]460hb01 App000

4/31


LTY[Z]460HB01 is a color active matrix liquid crystal display (LCD) that uses amorphous

silicon TFT(Thin Film Transistor) as switching components. This model is composed of aTFT LCD panel, a driver circuit and a back light unit. The resolution of a 46.0is 1920 x1080 and this model can display up to 1.07 billion colors with wide viewing angle of 89 orhigher in all directions. This panel is intended to support applications to provide a excellentperformance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Displayterminals for AV application products, and High Definition TV (HDTV).

RoHS compliance (Pb-free) 1.07(True-10Bit) Color Support High contrast ratio, high aperture ratio, fast response time

SPVA (Super Patterned Vertical Align) mode Wide viewing angle (89) High speed responseFull HD(1920 x 1080 pixels) resolution (16:9) Low Power consumption 24 High color gamut CCFTs (Cold Cathode Fluorescent Tube) DE(Data Enable) mode Mini-LVDS (Mini Low Voltage Differential Signaling) interface

Features

General Description

Description

General Information

57.1(DMAX)

mm0.53025(H) x 0.17675(W)*3Pixel Pitch

g16000(Max)Weight

1.0mmmm

1083.0(HTYP) x 627.0(VTYP)Module Size

mm1018.08(H) x 572.67(V)Active Display Area

Refer to Page 6

Note

DSLR(3H)Surface Treatment

cd/m2550Luminance of White

Normally BlackDisplay Mode

RGB vertical stripePixel Arrangement

pixel1920 x 1080Number of Pixels

colors1.07 billion(True-10Bit)Display Colors

UnitSpecificationItems

7/28/2019 Sony Lty[z]460hb01 App000

5/31


Note (1) Ta=25 2 C(2) Temperature and relative humidity range are shown in the figure below.

a. 93.8 % RH Max. (Ta 40 C)b. Maximum wet-bulb temperature at 40 C or less. (Ta 40 C)c. No condensation

(3) Polarizer will not be damaged in this range, even though abnormal visual problems occur

inTSUR range.

(4) 11ms, sine wave, one time for X, Y, Z axis(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverabledamage to the device.

Fig. Temperature and Relative humidi ty range

30-Z axis

XY axis

(2)500TOPROperating Temperature

40

(1)V13GND-0.5VDDPower Supply Voltage

(5)G1.5-VNOPVibration ( non - operating )

(4)G-

SNOP

Shock ( non - operating )

(3)650TSURPanel surface temperature

(2)65-20TSTGStorage temperature

NoteUnitMax.Min.SymbolItem

7/28/2019 Sony Lty[z]460hb01 App000

6/31


2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.Measuring equipment :TOPCON BM-7,SPECTRORADIOMETER SR-3

(Ta =25 2C, VDD=12V, fv= 60Hz, fDCLK=148.5MHz, Dim=90%)

-2.2-Gamma

-8-

Normal

L,R=0U,D=0

ViewingAngle

TgG-to-G

(7)SR-3

%-90--Color Gamut

Ver.

Hor.

(4)

SR-3%23--BuniBrightness Uniformity

(9 Points)

-8979D

-8979U

-8979R (8)SR-3

Degree

-8979

C/R10

L

ViewingAngle

(7)SR-3

K-(11800)*--Color Temperature

White

Blue

Green

Red

Falling

Rising

(0.274)*Wy

(0.274)*Wx

(0.059)*By

(0.148)*Bx

(0.662)*Gy

(0.211)*Gx

(0.324)*Ry

(7),(8)SR-3

TYP.+0.03

(0.651)*

TYP.-0.03

Rx

ColorChromaticity(CIE 1931)

(6)SR-3

cd/m2-550450YLLuminance of White(Center of screen)

106-Tf(5)

BM-7msec

1610-TrResponse

Time

(3)SR-3

-1700(1000)*C/RContrast Ratio

(Center of screen)

NoteUnitMax.Typ.Min.ConditionSymbolItem

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between40min and 60min after lighting the back light at the given temperature for stabilizationof the back light. This should be measured in the center of screen.

Single lamp current @ IL = 6.5mArms(typ.), Dim = 90%Environment condition : Ta =25 2 C

*marked Items will be decided after taking data of early mass production.

7/28/2019 Sony Lty[z]460hb01 App000

7/31


2BM-7

1SR-3

FieldPhoto detectorPhoto detector

LCD Panel

TFT - LCD Module

The center of the screen

SR-3 : 50BM-7 : 50

Field

Note (2) Definition of test point

Active Area

Test Point

Note (3) Definition of Contrast Ratio (C/R): Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel

C RG

G/

max

min=

Gmax : Luminance with all pixels whiteGmin : Luminance with all pixels black

320 960 1600

900

540

180

7/28/2019 Sony Lty[z]460hb01 App000

8/31


Note (4) Definition of 9 points brightness uniformity

Note (5) Definition of Response time : Sum of Tr, Tf

Buni

B B

B=

100

( max min)

max

Bmax : Maximum brightnessBmin : Minimum brightness

Display data

Optical InstrumentsResponse

TIME

TR TF

10%

90%

White (data off)

0%

Black (data off) White (data on)

100%

Note (6) Definition of Luminance of White : Luminance of white at center point

Note (7) Definition of Color Chromaticity (CIE 1931)Color coordinate of Red, Green, Blue & White at center point

Note (8) Definition of Viewing Angle: Viewing angle range (C/R 10)

7/28/2019 Sony Lty[z]460hb01 App000

9/31


3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.Ta = 25C 2 C

(4)A3--IRUSHRush Current

MHz155148.5130fDCLKMain Frequency

kHz7567.550fHHsync Frequency

Hz636047fVVsync Frequency

mA-1000-(c) Mosaic

mA13001200-(b) White (2),(3)

mA-800-

IDD

(a) BlackCurrentof PowerSupply

(1)V131211VDDVoltage of Power Supply

NoteUnitMax.Typ.Min.SymbolItem

Note (1) The ripple voltage should be controlled under 10% of VDD.(2) fV=60Hz, fDCLK=148.5MHz, VDD =12.0V, DC Current.(3) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) Mosaic

(4) Measurement Conditions

Rush Current IRUSH can be measured when TRUSH. is 1ms.

TRUSH=1ms

100%

GND

90%

10%

VDD

7/28/2019 Sony Lty[z]460hb01 App000

10/31


3.2 Back Light Unit

The back light unit contains 24 CCFTs ( Cold Cathode Fluorescent Tube ).The characteristics of lamps are shown in the following tables.

Ta=25 2C

(1)Hour--30,000HrOperating Life Time

NoteUnitMax.Typ.Min.SymbolItem

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.

[Operating condition : Ta =252, IL =6.5mArms(typ.), For single lamp only. ]

LCD

Module

Socket

Balance

Board

HOT 1

HOT 2

HOT 23

HOT 24

Balance

Board

HOT 24

HOT 23

HOT 2

HOT 1

Socket

7/28/2019 Sony Lty[z]460hb01 App000

11/31


4. Block Diagram

CONTROL PCB

CONTROL

DATA

VIN(12.0V)

AVDD

Von/Voff

VCOM

Voltage

VCC(1.8V)

SOURCE

PCB

FPC

DATA Dr.IC(720CH)X4

DATA Dr.IC(720CH)X4

DATA Dr.IC(720CH)X4

DATA Dr.IC(720CH)X4

460HT PANEL

1920 x 1080 x RGB

GATE Dr. IC(540CH)X4


SOURCE

PCB

FPC

USER CONNECTORUSER CONNECTOR

VCOM-GENR-STRING +FB

VCOM-GENR-STRING +FB

SSCSSC

DCC MEMORYDCC MEMORY

GAMMA GENGAMMA GEN

T-ConLVDS + mini

LVDS

T-ConLVDS + mini

LVDS



VCC(3.3V)

DC/DC CONVERTERDC/DC CONVERTER

DC/DC CONVERTERDC/DC CONVERTER

Von/off GENVon/off GEN

7/28/2019 Sony Lty[z]460hb01 App000

12/31


5. Input Terminal Pin Assignment

5.1. Input Signal & Power Connector : FI_R51S_HF ( J AE )

ACC SEL - HIGH : ACC OFF LOW/OPEN : ACC ON

B-INT : I2C BUS RELEASE

USER CAN ACCESS EEPROMH

SDA/SCL LINE BECOME HI-ZL/OPEN

DCC Select Bit

SEC Internal Use Only

N.C.

Odd LVDS Signal +

Odd LVDS Signal -

Even LVDS Signal +

Even LVDS Signal -

T-Con Ready Check

DCC Look-upTable Select

N.C.

ACC On/Off

Bus Release

I2C SDA

I2C SCL

GND

Even LVDS Signal +

Even LVDS Signal -

GND

Even LVDS Clock+

Even LVDS Clock-

GND

Even LVDS Signal +

Even LVDS Signal -

Even LVDS Signal +

Even LVDS Signal -

Even LVDS Signal +

Description

Even LVDS Signal -

GND

Odd LVDS Signal +

Odd LVDS Signal -

GND

Odd LVDS CLK +

Odd LVDS CLK -

GND

Odd LVDS Signal +

Odd LVDS Signal -

Odd LVDS Signal +

Odd LVDS Signal -

Odd LVDS Signal +

Odd LVDS Signal -

GND

GND

GND

N.C.

VDD

VDD

VDD

VDD

VDD

Description

LUT SEL249GND24

T-Con Ready50RE[0]N25

DCC SEL46RO[3]P21

LUT SEL047RO[4]N22

LUT SEL148RO[4]P23

ACC SEL44GND19

N.C45RO[3]N20

RE[4]P38RO[1]P13

GND39RO[2]N14

SCL40RO[2]P15

SDA41GND16

SEL151

B-INT43ROCLK+18

N.C42ROCLK-17

RE[4]N37RO[1]N12

RE[3]P36RO[0]P11

RE[3]N35RO[0]N10

GND34GND9

RECLK+33GND8

RECLK-32GND7

GND31N.C.6

RE[2]P30Power5

RE[2]N29Power4

RE[1]P28Power3

RE[1]N27Power2

RE[0]P26Power1

SignalPIN No.SignalPIN No.

7/28/2019 Sony Lty[z]460hb01 App000

13/31

7/28/2019 Sony Lty[z]460hb01 App000

14/31


Note(1) Pin number starts from Right side

Pin No. 1 Pin No. 51

PCB

a. All GND pins should be connected together and also be connected to the LCDsmetal chassis.

b. All power input pins should be connected together.c. All NC pins should be separated from other signal or power.

Fig. Connector diagram

#1

connect name

#51

#1 #51

7/28/2019 Sony Lty[z]460hb01 App000

15/31


5.2. Balance Board

5.2.1 Recommended Operation Condition

Vrms--4200HVSTRIKEStriking

Voltage(1)

Bright Control%100-20DPWMDim Duty

Ratio

Hz170160150FDIMDimming

Frequency

Switching

FrequencykHz625553FOP

Inverter

Frequency

Max.Typ.Min.RemarkNoteUnit

RecommendationSymbolItem

NoteAsymmetric ratio of Total Input Current must be less than 10 % ( | IP I-P | / ( Irms@T

7/28/2019 Sony Lty[z]460hb01 App000

16/31


5.2.2 Balance Board Input Pin Configuration

1. HV Input Connector : MD51SU-2P-13V(Hirose)

Power Supply for CCFLHV22


REMARKSYMBOLPIN NO.

2. Feed Back Interface : KN30-7P-1.25H(Hirose)

Lamp DetectionLD4,5,6,7

GNDGND3

Feed BackFB2

12VVcc1

REMARKSYMBOLPIN NO.

3. HV Input Connector : BM03-XASS-TF(LF)(SN)(J ST)


NCNC2

Power Supply for CCFLHV11REMARKSYMBOLPIN NO.

4. HV Input Connector : BM04B-XASS-TF(LF)(SN)(J ST)

NCNC4


NCNC2


REMARKSYMBOLPIN NO.

7/28/2019 Sony Lty[z]460hb01 App000

17/31


5.2.3 Feedback I/O Specification

Low

(LD)

High

(Normal)

1--

@Vcc =12 [V]V

--Vcc-1

VLDLamp

Detection

at RecommendedLoad Condition

mA20--IOCInput currentOf Vcc

LampV151211VCCSupply Voltage

Max.Typ.Min.

REMARKSUNIT

Recommendation

SYMBOLITEM

5. Left Right Interface Connector : KN30-10P-1.25H (Hirose)

7,8,9,10

5,6

3,4

1,2

RightLeft

J IN Coil LoopLOOP4,3,2,1

Protect InterfacePROT6,5,

12VVCC8,7

GroundGND10,9

REMARKSYMBOLPIN NO.

7/28/2019 Sony Lty[z]460hb01 App000

18/31


5.3 LVDS Interface

RESERVED

B1

B0

G1

G0

R1

R0

RESERVED

B3

B2

G3

G2

R3

R2

DEN

VSYNC

HSYNC

B9

B8

B7

B6

B5

B4

G9

G8

G7

G6

G5

G4

R9

R8

R7

R6

R5

R4

Even Data

RESERVEDTxIN/RxOUT34

B1TxIN/RxOUT33

B0TxIN/RxOUT32

G1TxIN/RxOUT31

G0TxIN/RxOUT30

R1TxIN/RxOUT29

R0TxIN/RxOUT28

TxOUT/RxIN4

RESERVEDTxIN/RxOUT23

B3TxIN/RxOUT17

B2TxIN/RxOUT16

G3TxIN/RxOUT11

G2TxIN/RxOUT10

R3TxIN/RxOUT5

R2TxIN/RxOUT27

TxOUT/RxIN3

DENTxIN/RxOUT26

VSYNCTxIN/RxOUT25

HSYNCTxIN/RxOUT24

B9TxIN/RxOUT22

B8TxIN/RxOUT21

B7TxIN/RxOUT20

B6TxIN/RxOUT19

TxOUT/RxIN2

B5TxIN/RxOUT18

B4TxIN/RxOUT15

G9TxIN/RxOUT14

G8TxIN/RxOUT13

G7TxIN/RxOUT12

G6TxIN/RxOUT9

G5TxIN/RxOUT8

TxOUT/RxIN1

G4TxIN/RxOUT7

R9TxIN/RxOUT6

R8TxIN/RxOUT4

R7TxIN/RxOUT3

R6TxIN/RxOUT2

R5TxIN/RxOUT1

R4TxIN/RxOUT0

TxOUT/RxIN0

Odd DataLVDS pin

7/28/2019 Sony Lty[z]460hb01 App000

19/31


5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

Note) Definition of Gray :Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)Input Signal : 0 =Low level voltage, 1 =High level voltage

COLOR DIS PLA Y

DATA SIGNAL

GRAY

SCALE

LEVEL

RED GREEN BLUE

R

0

R

1

R

2

R

3

R

4

R

5

R

6

R

7

R

8

R

9

G

0

G

1

G

2

G

3

G

4

G

5

G

6

G

7

G

8

G

9

B

0

B

1

B

2

B

3

B

4

B

5

B

6

B

7

B

8

B

9

BASIC

COLOR

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

CYAN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

GRAY

SCALE

OF

RED

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

DARK

LIGHT

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :R3~R1020

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :

1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1021

0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1022

RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1023

GRAY

SCALE

OF

GREEN

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

DARK

LIGHT

0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :G3~G1020

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :

0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1021

0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1022

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1023

GRAY

SCALE

OF

BLUE

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

DARK

LIGHT

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 B1

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 B2

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :B3~B1020

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023

7/28/2019 Sony Lty[z]460hb01 App000

20/31


6. Interface Timing

6.1 Timing Parameters ( DE only mode )

-clocks245022002154THHorizontal

Total

-clocks-1920-THD

ActiveDisplayPeriodHorizontal

Display Term

-Lines148011251100TVBVerticalTotal

-lines-1080-TVD

ActiveDisplayPeriodVertical

Display Term

-Hz636047FVVsync

-KHz7567.550FHHsync

-MHz155148.51301/TC

Frequency

Clock

NOTEUnitMAX.TYP.MIN.SYMBOLITEMSIGNAL

Note) This product is DE only mode. The input of Hsync &Vsync signal doesnot have an effect on normal operation.

(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system(2) Internal VDD = 3.3V

7/28/2019 Sony Lty[z]460hb01 App000

21/31


6.2 Timing diagrams of interface signal ( DE only mode )

DATA

SIGNALS

DE

TVD

TV

TH

DCLK

TC

DE

THD

TVB

0.5

VCC

TES

TDS TDH

TCH TCL

TC

DE

DISPLAY

DATA

DCLK

0.5

VCC

0.5

VCC

7/28/2019 Sony Lty[z]460hb01 App000

22/31

7/28/2019 Sony Lty[z]460hb01 App000

23/31

7/28/2019 Sony Lty[z]460hb01 App000

24/31

MODEL LTY[Z]460HB01 Doc. No 05-000-S-070907

Outline dimension (Rear View)

7/28/2019 Sony Lty[z]460hb01 App000

25/31


8. EMI Recommendation

: -3dB at CISPR22 Class B

This EMI Recommendation is recommended to be measured at SET Condition.

9. Input Spread Spectrum Specification

10. UL Approval

200Khz

Modulation Frequency(Max.)

50KHz1.2%Input

Signal

Modulation Frequency(Min.)

Modulation Rate(Max.)

7/28/2019 Sony Lty[z]460hb01 App000

26/31

7/28/2019 Sony Lty[z]460hb01 App000

27/31


12. PACKING

12.1 CARTON (Internal Package)

(1) Packing FormCorrugated fiberboard box and corrugated cardboard as shock absorber

(2) Packing Method

Pallet(8.8kg) +Module( 16 x 10 =160kg) +Cushion(10kg) +Pallet-BOX(8kg)

186.8 kgTotal Pallet Weight

1270mm(H) x 1150mm(V) x 884mm(Height)H x V x heightTotal Pallet Size

-VerticalPacking Direction

Pallet weight : 8.8kg1 Box / PalletPallet

1. 160Kg/LCD(10ea)2. 10kg/Cushion Set(2ea)3. 8kg/Packing-Pallet Box(1ea)4. Cushion Material : EPS

5. Packing Pallet Box Material : DW4

10 ea / (Packing-Pallet Box)

LCD Packing

RemarkSpecificationItem

12.2 Packing Specification

Packing Pallet Box

Cushion SetModule (10EA)

Pallet

Direction be able to Open

7/28/2019 Sony Lty[z]460hb01 App000

28/31


13. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.(1) Parts number : LTY[Z]460HB01-XXXX(2) Revision: One letters(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)Glass No. (In the one Lot)Lot No. (Glass)Month

Year (Note1)

Product codeLine

40mm

80mm

Week code : 05 29

weekyear

(4) Nameplate Indication

(6) Others1. After service part

Lamps cannot be replaced because of the narrow bezel structure.

LTY[Z]460HB01

XXXXXXXXXX xxx

LTY[Z]460HB01XXXX

Lot number

Revision code

(5) Packing box attach

Part number100mm

Box serial number

Revision codeXXXX

10

LTY[Z]460HB01

0703

7/28/2019 Sony Lty[z]460hb01 App000

29/31


14. General Precautions14.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly

using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from powerbefore it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.In addition to damage, this may cause improper operation or damage to the Moduleand CCFT back light.

(d) Note that polarizers are very fragile and could be damage easily.

Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a longtime, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acidor Methyl chloride. It might permanent damage to the polarizer due to chemicalreaction.

(h) If the liquid crystal material leaks from the panel, it should be kept awayfrom the eyes or mouth . In case of contact with hands, legs or clothes, it mustbe washed away with soap thoroughly.

(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during theincoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not adjust the variable resistor located on the Module.

(m) Protection film for polarizer on the Module should be slowly peeled off just before

use so that the electrostatic charge can be minimized.

(n) Pins of I/F connector should not be touched directly with bare hands.

7/28/2019 Sony Lty[z]460hb01 App000

30/31


14.2 Storage

(a) Do not leave the Module in high temperature, and high humidity for a long time.

It is highly recommended to store the Module with temperature from 0 to 35and relative humidity of less than 70%.

(b) Do not store the TFT-LCD Module in direct sunlight.

(c) The Module should be stored in a dark place. It is prohibited to apply sunlight orfluorescent light in storing.

14.3 Operation

(a) No Connection or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagneticinterference should be done by system manufacturers. Grounding and shielding methodsmay be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply shouldbe connected directly with a minimized length. A longer cable between

the back light and the inverter may cause lower luminance of lamp(CCFT) andmay require higher startup voltage(Vs).

14.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.Normal condition is defined as below;

- Temperature : 2015- Humidity : 5520%- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,humidity, display patterns or operation time etc.., It is strongly recommendedto contact SEC for Application engineering advice. Otherwise, its reliability andfunction may not be guaranteed. Extreme conditions are commonly found atAirports, Transit Stations, Banks, Stock market, and Controllingsystems.

7/28/2019 Sony Lty[z]460hb01 App000

31/31


14.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnectionof electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,input voltage variation, variation in part contents and environmental temperature,and so on)Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,the image may be "sticked" to the screen.

To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handledcarefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

sony lty[z]460hb01 app000

Documents