jadual i (schedule i) - portal rasmi jpj - jpj portal
TRANSCRIPT
1
JADUAL I (SCHEDULE I) Type Approval Performance Requirements (G/N - Machinery/Commercial Vehicle)
Item No.
Subject
Particulars of
instrument or other documents containing
requirements
Nature of
requirement
Date of
application
1 Power to weight ratio
Rule of the motor vehicle (C&U)1959. (Minimum 6hp/t)
2
Indicator Performance
E.C.E R6
3
Brake Lamp Performance
E.C.E R7
4 Brake Performance
E.C.E R13
5
Safety Belt Anchorages
M.S 1175 E.C.E R14
6 Exhaust emission (Petrol/LPG/CNG engine)
Peraturan-Peraturan Kualiti Alam Sekeliling (Kawalan Pelepasan Daripada Enjin Petrol) 1996. E.C.E R15 / R83
7 Seats
E.C.E R17
8
Protection Against Unauthorised Use
M.S 1742 E.C.E R18 / R97 / R116
9 Smoke emission (diesel engine)
Peraturan-Peraturan Kualiti Alam Sekeliling (Kawalan Pelepasan Daripada Enjin Disel) 1996. E.C.E R24 / R49
10 Head Restraint
E.C.E R25
11
Audible Warning Device
E.C.E R28
2
Item No.
Subject
Particulars of
instrument or other documents containing
requirements.
Nature of
requirement
Date of
application
11 Tyres M.S. 1394 E.C.E. R30 / R54 FMVSS 119
12 Speedometer
E.C.E.R39
13 Safety Glass
M.S 595 E.C.E R43
14 Rear View Mirrors
E.C.E R46
15
HID Head Lamp Performance (if any)
M.S ISO 303 E.C.E R48 / R98 / R99
16 Noise Emission
Peraturan-Peraturan Kualiti Alam Sekeliling (Bunyi Bising Kenderaan Motor) 1987. E.C.E R51
17
Rear Underrun Protection (if any)
E.C.E R58
18
Rear Marking Plates for Slow Moving Vehicles (if any)
E.C.E R69
19
Rear Marking Plates for Heavy and Long Vehicles (if any)
E.C.E R70
20
Lateral Protection (if any)
E.C.E R73
21 Steering Equipment
E.C.E R79
22
Front Underrun Protection (if any)
E.C.E R93
23
Protection of the Occupants in the Event of a Lateral Collision (if any)
E.C.E R95
3
Item No.
Subject
Particulars of
instrument or other documents containing
requirements.
Nature of
requirement
Date of
application
24
Battery Electric Vehicles (if any)
E.C.E R100
25
Retro-reflective Markings for Heavy and Long Vehicles (if any)
E.C.E R104
26
Head Lamp Performance
E.C.E R112 / R113
SCHEDULE II
4
APPLICATION FOR TYPE APPROVAL OF MOTOR VEHICLE Reference No : Date of submission. Part 1: General Information 1. Applicant's name and address
__________________________________
__________________________________
__________________________________
__________________________________
__________________________________ 2. Make (Manufacturer) : _______________
Model Name : ______________________ Model Code : ______________________ Model Year : ______________________
3. Type and configuration body :
4. Country of manufacture __________________________________
5. Proposed usage
__________________________________
5
Part II. Specifications
(*) Please state/specify performance standard according to MS/SCE/ADR/JIS/other.
1. Dimensions
(a) Overall length (mm) _____________________
(b) Overall width (mm) _______________________
(c) Overall height (mm) _____________________ (d) Wheel base (mm) _______________________
i. Between first and second axles ______________________
ii. Between second and third axles _____________________
iii. Between third and fourth axles _____________________
(e) Ground clearance (mm)
i. Unladen _____________________
ii. Fully laden _____________________
(f) Wheel treads (mm)
i. Front axles _____________________
ii. Rear axles _____________________
(g) Body overhang (mm)
i. Front end _____________________
ii. Rear end _______________________
(h) Chassis frame overhang (mm) (For chassis-cab model)
i. Front end _____________________
ii. Rear end _____________________
6
(i) Minimum turning circles (mm)
i. Kerb to kerb ______________________
ii. Body to body ______________________
(j) Gravity height (mm) ______________________ 2. Weight
(a) Kerb Weight (kg)
i. Front axles ________________________
ii. Rear axles ______________________
(b) Number of axles ______________________
(c) Axle Rating
i. Front axles (kg) ______________________
ii. Rear first axles (kg) _______________________
iii. Rear second axles (kg) ______________________
(d) Design gross vehicle weight (kg) ______________________ 3. Maximum stable inclination angle ________________________ 4. Seating capacity (person) _______________________ 5. Drive: Front wheel/Rear wheel/4 wheel ______________________ 6. Spacing for the display of registration number plate:
Front ..................... ______________________
Rear ..................... ______________________ 7. Engine
(a) Name of producer ______________________
(b) Type and model ______________________
(c) Position of mounting _______________________
7
d) Type of fuel _________________________ (e) Engine capacity _______________________
(f) Cycle _______________________
(g) No of cylinder _______________________
(h) Cylinder arrangement _______________________
(i) Bore X Stroke _______________________
(j) Piston Displacement _______________________
(k) Valve arrangement _______________________
(l) Compression ratio _______________________
(m) Max. net power (KW @ r.p.m.) _________________________
(n) Max. net torque (kN m @ r.p.m) ________________________
(o) Type of supercharger
or turbocharger _______________________
(p) Emission gas control system _______________________
(q) Lubricating system
(i) Lubricating method _______________________
(ii) Type of oil pump _______________________
(iii) Type of oil filter ________________________
(iv) Capacity of lubricating oil (l) _______________________
(v) Type of oil cooler _________________________
(r) Cooling system
(i) Cooling method ________________________
(ii) Type of radiator _______________________
(iii) Capacity of cooling water _______________________ (iv) Type of water pump _______________________ (v) Type of thermostat ________________________
8
8. Fuel system
(a) Fuel tank
(i) Material _______________________
(ii) Capacity (litre) _______________________
(iii) Position _______________________
(b) Fuel Pump
(i) Type ________________________
(ii) Flow rate ________________________
(c) Fuel Filter
(i) Type _______________________
(ii) Flow rate _______________________
(d) Fuel Injection
(i) Type _______________________
(ii) Model ______________________
(iii) Method ______________________
(e) Carburetor
(i) Type _______________________
(ii) Diameter of throttle valve (mm) _______________________
(iii) Diameter of venture (mm) _______________________
(iv) Type of choke valve _______________________
(f) Air cleaner
(i) Type _______________________
(ii) Number _______________________
9
(g) LPG/NGV/CNG equipment
(i) Make and Model of LPG/NGV/CNG kit ____________________
(ii) Make and model of container ___________________
(iii) Capacity of container ___________________
(iv) Supplier and authorised installer ___________________
9. Transmission system
(a) Type of clutch ____________________
(b) No. of speed ____________________
(c) Type of transmission ____________________
(d) Torque convertor pressure _____________________
(e) Gear ratio (to 1)
1 st gear ___________________
2nd gear ___________________
3rd gear ___________________
4th gear _____________________
5th gear ____________________
6th gear ___________________
Reverse gear ___________________
Differential gear ____________________
Wheel hub reduction ___________________
10
10. Running system
(a) Front axle type ___________________
(b) Rear axle type ___________________
(c) Tyre size
(i) Front tyre ___________________
(ii) Rear tyre ___________________
(iii) Spare tyre _____________________
(d) Rim size
(i) Front wheel ___________________
(ii) Rear wheel ___________________
(iii) Spare wheel ___________________
(e) Optional tyre and rim size
(i) Front wheel ___________________
(ii) Rear wheel ___________________
(iii) Spare wheel ___________________
(f) Air pressure
(i) Front wheel ___________________
(ii) Rear wheel ___________________
(iii) Spare wheel ___________________
(g) Ply rating
(i) Front wheel ___________________
(ii) Rear wheel ____________________
(iii) Spare wheel ___________________
11
(h) Maximum load on tyre
(i) Front wheel ___________________
(ii) Rear wheel ___________________ (iii) Spare wheel ____________________
11. Suspension system
(a) Front axle
(i) Type of suspension ___________________
(ii) Type of spring ____________________
(iii) Material of spring ___________________
(iv) Dimensions of main spring ____________________
(v) Number of main spring _____________________
(vi) Dimensions of auxiliary spring ___________________
(vii) Number of auxiliary spring ____________________
(b) Rear axle
(i) Type of suspension ____________________
(ii) Type of spring ___________________
(iii) Material of spring ___________________
(iv) Dimensions of main spring ___________________
(v) Number of main spring ___________________
(vi) Dimensions of auxiliary spring ____________________
(vii) Number of auxiliary spring ____________________
12
(c) Type of shock absorber
(i) Front wheel __________________
(ii) Rear wheel __________________
(iii) Name of producer __________________
(d) Type of stabilizer
(i) Front wheel __________________
(ii) Rear wheel __________________
(iii) Name of producer __________________ 12. Steering System
(a) Steering wheel positions (LHS/RHS) __________________
(b) Front wheel alignment
(i) Amount of side slip ___________________
(c) Booster
(i) Type _____________________
(ii) Name of producer ____________________
(d) Locking device
(i) Type __________________
(ii) Name of producer __________________
(iii) Mounting position __________________
13
13. Brake System
(a) Service brake (Attached test report for service brake)
(i) Type
-Front ___________________
-Rear ___________________
(ii) Size of brake ___________________
(iii) Control system and No. of braking wheel ___________________
(iv) Brake pipes/hoses
-Material ___________________
(v) Booster
-Type ___________________
-Magnification ___________________
(vi) Braking efficiency
-Front ___________________
-Rear ___________________
(vii) Other safety device incorporated
(ABS/SLIPS/LSD or others) __________________
(b) Parking brake (Attached test report for service brake)
(i) Type ___________________
(ii) Braking efficiency
-Front ___________________
-Rear ___________________
14
(c) Auxiliary brake (if any)
(i) Type __________________
(ii) Performance* __________________
(d) Emergency brake (if any)
(i) Type __________________
(ii) Performance* __________________
(e) Separate brake (if any)
(i) Type __________________
(ii) Performance* __________________ 14. Chassis frame
(a) Type __________________
(b) Cross section dimension __________________
(c) Type of material __________________
(d) Type of side protection device __________________
(e) Sample of chassis code number ___________________ 15. Body
(a) Type __________________
(d) Any back protection device __________________ 16. Equipment for passengers
(a) Seat belt anchorage
(i) Type __________________
(ii) Number __________________
(iii) Performance* __________________
15
(b) Seat belt
(i) Name of producer ___________________
(ii) Type ___________________
(iii) Number ___________________
(iv) Performance* ___________________
(c) Head restraint
(i) Name of producer ___________________
(ii) Type ___________________
(iii) Number ___________________
(iv) Performance* ___________________
(d) Doors
(i) Type ___________________
(ii) Number ____________________ (iv) Performance* ___________________
17. Glass
(a) Front windscreen
(i) Name of producer ___________________
(ii) Kind/Type of glass ___________________
(iii) Thickness ___________________
(iv) % of light transmission ____________________
(v) Performance* ___________________
16
(b) Side windows
(i) Name of producer ____________________
(ii) Kind/Type of glass ___________________
(iii) Thickness ___________________
(iv) % of light transmission ___________________
(v) Performance* ___________________
(c) Rear screen
(i) Name of producer ____________________
(ii) Kind/Type of glass ___________________
(iii) Thickness __________________
(iv) % of light transmission __________________
(v) Performance* __________________ 18. Noise prevention device
(a) Silencer
(i) Name of product __________________
(ii) Type __________________
(iii) Number __________________
(b) Noise level (dBA)
(i) Stationary (Attached test report and method test) __________________
(ii) Accelerated running
(Attached test report and method test) __________________
(iii) Performance* _________________
17
19. Exhaust emission control device (Attached test report)
(a) Type __________________
(b) Position and direction of exhaust pipe opening __________________
(c) HSU level/K Value/Opacimeter Value
(free accelerated test) __________________
(d) CO ) __________________ )
(e) HC ) idling mode __________________ )
(f) NOx ) __________________ )
(g) H2O ) __________________
(h) CO ) __________________ ) as per (i) HC ) ECE __________________
) 15.04 (j) NOx ) __________________ ) (k) H2O ) ___________________ (l) Performance* __________________
20. Electrical System
(a) Operating voltage __________________
(b) Type of Ignition system __________________
(c) Type of electric wave noise suppression or prevention device __________________
(d) Spark Plug
(i) Type __________________
(ii) Gap ___________________
(d) Battery capacity (AH) _________________
18
(e) Charging system
(i) Type ___________________
(ii) Output __________________
(f) Starting system
(i) Type __________________
(ii) Output __________________ 21. Lighting equipment
(a) Head lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Automatic or manual low and high adjuster __________________
(v) Performance* __________________
(b) Front fog lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(c) Front turning lamps
(i) Name of producer ____________________
(ii) Type __________________
(iii) Numbers, colour ...watts ____________________
(iv) Rate of flashing __________________
(v) Performance* ___________________
19
(d) Front side turning lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(e) Daytime running lamps
(i) Name of producer ___________________
(ii) Type __________________
(iii) Numbers, colour ...watts ____________________
(iv) Performance* __________________
(f) Rear reflex reflector
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(g) High mount stop lamps (3rd brake light)
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(h) Tail lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* ________________
20
(i) Stop lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(j) Rear turning lamps
(i) Name of producer ___________________
(ii) Type ___________________
(iii) Numbers, colour ...watts ___________________
(iv) Performance* ___________________
(v) Rate of flashing ___________________
(k) Hazard light (front/rear)
(i) Name of producer ___________________
(ii) Type ___________________
(iii) Numbers, colour ...watts ___________________
(iv) Performance* ___________________
(v) Rate of flashing ___________________
(l) Passenger compartment lamp
(i) Name of producer ____________________
(ii) Type __________________
(iii) Number and colour __________________
(iv) Performance* __________________
21
(m) Back -up lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(n) License lamps (front/rear)
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(o) Rear fog lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(p) Rear side marker lamps
(i) Name of producer __________________
(ii) Type __________________
(iii) Numbers, colour ...watts __________________
(iv) Performance* __________________
(q) Goods compartment lamps
(i) Name of producer _________________
(ii) Type _________________
(v) Numbers, colour,.....watts _________________ (iv) Performance* _________________
22
22. Warning device
(a) Horn
(i) Name of producer __________________
(ii) Type __________________
(iii) Level of loudness __________________
(iv) Performance* __________________ 23. Rear view mirror (Automatic or manual adjustment) (a) Left
(i) Type __________________
(ii) Dimension and radius curvature ___________________ (b) Right
(i) Type __________________
(ii) Dimension and radius curvature __________________ (c) Inside
(i) Type __________________
(ii) Dimension and radius curvature ___________________
(iii) One way or two ways adjustment ___________________ 24. Wipers
(a) Type ___________________
(b) Number ___________________
(c) Performance* ___________________
23
25. Meters and dash board
(a) Speedometer
(i) Type ___________________
(ii) Performance* _____________________
(b) Tachometer
(i) Type ___________________
(ii) Performance* ___________________
(c) Odometer
(i) Type __________________
(ii) Performance* __________________
(d) Other meter fitted
(i) Type __________________
(ii) Performance* __________________ 26. Other accessories fitted
(a) ________________________
(b) ________________________
(c) ________________________
(d) ________________________
(e) ________________________
24
Part III. Other Information The following documents shall be submitted:-
1. Chassis frame strength calculation (not necessary for the monocoque body
frame.
The strength calculation shall be attached.
Please specify the standard adopted.
Note: The measurement by strain gauge etc. may be substituted for strength calculation.
2. Braking Ability Calculation
The braking test data by test vehicles may be substituted for braking ability calculation.
Please specify the standard adopted.
3. Test data/ reports to be attached
The test data/ report as per the requirement as stipulated in schedule 1 of the motor vehicles (Type Approval and Recalling) rules 1998 shall be attached.
I hereby certify that to the best of my knowledge, the above information are correct and I fully understand that should any of the above information is found to untrue, the application may be rejected or the type approval certificate, if issued, may be cancelled or suspended. Date:
(Signature)
Name:
Position:
25
BORANG MAKLUMAT SIJIL KELULUSAN JENIS KENDERAAN
(VEHICLE TYPE APPROVAL)
BUATAN
NAMA MODEL
KOD MODEL
MODEL TAHUN
JENIS / PREFIX NOMBOR ENJIN
…………………. / ……………………, ……………..Cylinder, ……………Stroke
KAPASITI / KUASA ENJIN ( KW)
BAHAN BAKAR ( RON)
BILANGAN TEMPAT DUDUK
TRANSMISI ( Speed)
JENIS BADAN
KEGUNAAN
KOD BUATAN
NEGARA PEMBUAT (CBU/CKD)
NAMA & ALAMAT PEMOHON
Pengesahan Syarikat
……………………………………………………… (Nama Syarikat: )