jadual i (schedule i)

1

JADUAL I (SCHEDULE I)

Type Approval Performance Requirements (L - Motorcycles)

Item No.

Subject Vehicle

Category

National Acceptance (Construction & Use)

Rules 1959

Actual Compliance

(Performance)

Date of Approval

1 Reflector Performance L1 – L7 UN R3.02

2 Direction Indicators L1 – L7 UN R6.01

3

Front and Rear Position (Side) Lamps, Stop Lamps and End- Outline Marker

L1 – L7 UN R7.02

4 Noise of three-wheeled vehicles

L2, L4, L5 UN R9.07

5 Radio Interference Suppression

L1 – L7 UN R10.04

6 Front Fog Lamps (If fitted)

L3, L4, L5, L 7

UN R19.04

7 Audible Warning Device L3, L4, L5, UN R28.00

8 Filament Lamps L1 – L7 UN R37.03

9 Rear Fog Lamps (If fitted)

L3, L4, L5, L 7

UN R38.00

10 Speedometer L1 – L7 UN R39.00

11 Exhaust emission

L3, L4, L5 L1, L2

Peraturan-Peraturan Kualiti Alam Sekeliling (Kawalan Pelepasan Daripada Enjin Petrol) 1996. UN R40.00 / (DOE) UN R47.00 / (DOE)

12 Noise emission

L3 L1

Peraturan-Peraturan Kualiti Alam Sekeliling (Bunyi Bising Kenderaan Motor) 1987. UN R41 (DOE) UN R63.00 (DOE)

2

Item No.

Subject Vehicle

Category

National Acceptance (Construction & Use)

Rules 1959

Actual Compliance

(Performance)

Date of Approval

13 Headlamp Cleaners (If fitted)

L1 – L7 UN R45.01

14 Lights L1 – L7 UN R50.00

15 Installation of Lights L3 L1

UN R53.01 / UN R74.01

16 Driver Operated Control (Motorcycle)

L1 & L3 UN R60.00

17 Protection Against Unauthorised Use

L1 – L7 UN R62.00

18 Special warning lamps (If fitted)

L1 – L7 UN R65.00

19 Halogen Headlamps (HS1 & HS2 for motorcycles)

L3, L4, L5 UN R72.01 / UN R82.01

20 Tyres L1, L2, L3,

L4, L5, MS 1394 UN R75.00

21

Brake Performance L1 – L5 UN R78.03

22 Rear View Mirrors L1 – L7 UN R81.00

23 Daytime Running Light L1 – L7 UN R87.00

24 Gas Discharge Head Lamp (If fitted)

L3 UN R98.01

25 Headlamps L1 – L7 UN R56.00 / UN R57.00 / UN R112.01 / R113.00

26

Light Emitting Diode (LED) light sources (If fitted)

L1 – L7 UN R128.00

27 Electric Motorcycles - Specifications

L1 – L7 MS 2413

3

SCHEDULE II APPLICATION FOR TYPE APPROVAL OF MOTOR VEHICLE (L- Category) Reference No : Date of submission. Part 1: General Information 1. Applicant's name and address

__________________________________

__________________________________

__________________________________

__________________________________

__________________________________ 2. Maker : _______________

Model Name : ______________________ Model Code : ______________________ Model Year : ______________________

3. Type and configuration body :

__________________________________

4. Country of manufacture __________________________________

5. Proposed usage

__________________________________

4

Part II. Specifications

(*) Please state/specify performance standard according to MS/ECE/FMVSS

1. Dimensions

(a) Overall length (mm) _____________________

(b) Overall width (mm) _______________________

(c) Overall height (mm) _____________________ (d) Wheel base (mm) _______________________

(e) Ground clearance (mm)

i. Unladen _____________________

ii. Fully laden _____________________

(f) Width Track (mm)

i. Front axles _____________________

ii. Rear axles _____________________

(g) Minimum turning circles (mm)

i. Kerb to kerb ______________________

ii. Body to body ______________________

2. Weight

(a) Kerb Weight (kg)

i. Front axles ________________________

ii. Rear axles ______________________

(b) Number of axles ______________________

5

(c) Axle Rating

i. Front axles (kg) ______________________

ii. Rear first axles (kg) _______________________

(d) Design gross vehicle weight (kg) ______________________ 3. Max. stable inclination angle (For EV only) ______________________ 4. Seating capacity (person) _______________________ 5. Spacing for the display of registration number plate:

Motorcycle : Front / Rear (Min 145 mm x 150 mm) – vertical ____________________ Front / Rear (Min 295 mm x 50 mm) – horizontal ____________________

6. Engine:

(a) Name of producer ______________________

(b) Type and model ______________________

(c) Position of mounting _______________________ d) Type of fuel _________________________ (e) Engine capacity _______________________

(f) Cycle _______________________

(g) No of cylinder _______________________

(h) Cylinder arrangement _______________________

(i) Bore X Stroke _______________________

(j) Piston Displacement _______________________

(k) Valve arrangement _______________________

(l) Compression ratio _______________________

6

(m) Max. net power (KW @ r.p.m.) _________________________

(n) Max. net torque (kN m @ r.p.m) ________________________

(o) Type of supercharger or turbocharger _______________________

(p) Emission gas control system (CO Value, g/km) _______________________

(q) Lubricating system

(i) Lubricating method _______________________

(ii) Type of oil pump _______________________

(iii) Type of oil filter ________________________

(iv) Capacity of lubricating oil (l) _______________________

(v) Type of oil cooler _________________________

(r) Cooling system

(i) Cooling method ________________________

(ii) Type of radiator _______________________

(iii) Capacity of cooling water _______________________ (iv) Type of water pump _______________________ (v) Type of thermostat ________________________

(s) Fuel Consumption (L/100 km) _______________________

6A. Electric Motor (Hybrid or Electric Only)

(a) Name of producer _______________________

(b) Type and model _______________________ (c) Position of mounting _______________________ (d) Motor Power (Maximum) (KW) _______________________ (e) Motor Power (Rated) (KW) _______________________ (f) Max. Net Torque (kN.m) _______________________

7

(g) Battery Type _______________________ (h) Battery Capacity _______________________

(i) Battery Consumption (Wh / 100 km) _______________________

7. Fuel system

(a) Fuel tank

(i) Material _______________________

(ii) Capacity (litre) _______________________

(iii) Position _______________________

(b) Fuel Pump

(i) Type ________________________

(ii) Flow rate ________________________

(c) Fuel Filter

(i) Type _______________________

(ii) Flow rate _______________________

(d) Fuel Injection

(i) Type _______________________

(ii) Model ______________________

(iii) Method ______________________

(e) Carburetor

(i) Type _______________________

(ii) Diameter of throttle valve (mm) _______________________

(iii) Diameter of venture (mm) _______________________

(iv) Type of choke valve _______________________

8

(f) Air cleaner

(i) Type _______________________

(ii) Number _______________________

(g) LPG/NGV/CNG equipment

(i) Make and Model of LPG/NGV/CNG kit ____________________

(ii) Make and model of container ___________________

(iii) Capacity of container ___________________ (iv) Location of container ___________________ (iv) Supplier and authorised installer ___________________

8. Transmission system

(a) Type of clutch ____________________

(b) No. of speed ____________________

(c) Type of transmission ____________________

(d) Torque convertor pressure _____________________

(e) Gear ratio (to 1)

1 st gear ___________________

2nd gear ___________________

3rd gear ___________________

4th gear _____________________

5th gear ____________________

6th gear ___________________

Reverse gear ___________________

Differential gear ____________________

Wheel hub reduction ___________________

9

9. Running system

(a) Front axle type ___________________

(b) Rear axle type ___________________

(c) Tyre size & brand

(i) Front tyre ___________________

(ii) Rear tyre ___________________

(iii) Spare tyre _____________________

(d) Rim specification

(i) Front wheel (size & material) ___________________

(ii) Rear wheel (size & material) ___________________

(iii) Spare wheel (size & material) ___________________

(e) Optional tyre and rim specification (size & brand)

(i) Front wheel ___________________ (ii) Rear wheel ___________________

(iii) Spare wheel ___________________

(f) Air pressure

(i) Front wheel ___________________

(ii) Rear wheel ___________________

(iii) Spare wheel ___________________

(g) Maximum load on tyre

(i) Front wheel ___________________

(ii) Rear wheel ___________________ (iii) Spare wheel ____________________

10

10. Suspension system

(a) Front axle

(i) Type of suspension ___________________

(ii) Type of spring ____________________

(iii) Material of spring ___________________

(iv) Dimensions of main spring ____________________

(v) Number of main spring _____________________

(vi) Dimensions of auxiliary spring ___________________

(vii) Number of auxiliary spring ____________________

(b) Rear axle

(i) Type of suspension ____________________

(ii) Type of spring ___________________

(iii) Material of spring ___________________

(iv) Dimensions of main spring ___________________

(v) Number of main spring ___________________

(vi) Dimensions of auxiliary spring ____________________

(vii) Number of auxiliary spring ____________________

(c) Type of shock absorber

(i) Front wheel __________________

(ii) Rear wheel __________________

(iii) Name of producer __________________

11

11. Steering System / Handle Bar

(a) Steering wheel positions (LHS/RHS/CTR) __________________

(b) Front wheel alignment

(i) Amount of side slip ___________________

(c) Booster

(i) Type _____________________

(ii) Name of producer ____________________

(d) Locking device

(i) Type __________________

(ii) Name of producer __________________

(iii) Mounting position __________________

12. Brake System

(a) Service brake

(i) Type & Size

-Front ___________________

-Rear ___________________

(ii) Control system and

No. of braking wheel ___________________

(iii) Brake pipes/hoses

-Material ___________________

(iv) Booster

-Type ___________________

-Magnification ___________________

12

(v) Braking efficiency (%)

-Front ___________________

-Rear ___________________

(vii) Other safety device incorporated (ABS/SLIPS/LSD or others) __________________

(b) Parking brake (Attached test report for service brake)

(i) Type ___________________

(ii) Braking efficiency

-Front ___________________

-Rear ___________________ (c) Auxiliary brake (if any)

(i) Type __________________

(ii) Certification Approval __________________

13. Chassis frame

(a) Type __________________

(b) Cross section dimension __________________

(c) Type of material __________________

(d) Type of side protection device (if any) __________________

(e) Sample of chassis code number ___________________ 14. Equipment for passengers

(a) Seat belt anchorage

(i) Type __________________

(ii) Number __________________

(iii) Certification Approval __________________

13

(b) Seat belt

(i) Name of producer ___________________

(ii) Type ___________________

(iii) Number ___________________

(iv) Certification Approval ___________________

(c) Head restraint


(ii) Type ___________________

(iii) Number ___________________


(d) Doors

(i) Type ___________________

(ii) Number ____________________ (v) Certification Approval ___________________

15. Glass

(a) Front windscreen


(ii) Kind/Type of glass ___________________

(iii) Thickness ___________________

(iv) % of light transmission ____________________

(v) Certification Approval ___________________

14

(b) Side windows

(i) Name of producer ____________________


(iii) Thickness ___________________

(iv) % of light transmission ___________________


(c) Rear screen



(iii) Thickness __________________

(iv) % of light transmission __________________

(v) Certification Approval __________________ 16. Noise prevention device

(a) Silencer

(i) Name of product __________________

(ii) Type __________________

(iii) Number __________________

(b) Noise level (dBA)

(i) Stationary (Attached test report and method test) __________________

(ii) Accelerated running

(Attached test report and method test) __________________

(iii) Certification Approval _________________

15

17. Exhaust emission control device (Attached test report)

(a) Type __________________

(b) Position and direction of exhaust pipe opening __________________

(c) HSU level/K Value/Opacimeter Value

(free accelerated test) __________________

(d) Certification Approval __________________

18. Electrical System

(a) Operating voltage __________________

(b) Type of Ignition system __________________

(c) Type of electric wave noise suppression or prevention device __________________

(d) Spark Plug

(i) Type __________________

(ii) Gap ___________________

(e) Battery capacity (AH) _________________

(f) Charging system

(i) Type ___________________

(ii) Output __________________

(g) Starting system

(i) Type __________________

(ii) Output __________________

(h) Immobilizer

(i) Type __________________


16

19. Lighting equipment

(a) Head lamps

(i) Name of producer __________________

(ii) Type __________________

(iii) Numbers, colour, Power (watts) __________________ (iv) Intensity (lumens) ___________________

(v) Automatic or manual

low and high adjuster __________________

(vi) Light Source Type __________________

(vii) Certification Approval __________________

(b) Front fog lamps


(ii) Type __________________

(iii) Numbers, colour, Power (watts) __________________

(iv) Certification Approval __________________

(c) Front turning lamps


(ii) Type __________________

(iii) Numbers, colour, Power (watts) ____________________

(iv) Rate of flashing __________________


(d) Front side turning lamps


(ii) Type __________________


17


(e) Daytime running lamps


(ii) Type __________________

(iii) Numbers, colour, Power (watts) ___________________


(f) Rear reflex reflector


(ii) Type __________________



(g) High mount stop lamps (3rd brake light)


(ii) Type __________________



(h) Tail lamps


(ii) Type __________________


(iv) Certification Approval ________________

(i) Stop lamps


(ii) Type __________________

18



(j) Rear turning lamps


(ii) Type ___________________



(v) Rate of flashing ___________________

(k) Hazard light (front/rear)


(ii) Type ___________________



(v) Rate of flashing ___________________

(n) Registration Plate Lamps


(ii) Type __________________



(o) Rear fog lamps


(ii) Type __________________



19

(p) Rear side marker lamps


(ii) Type __________________



20. Warning device

(a) Honk


(ii) Type __________________

(iii) Level of loudness __________________


21. Rear view mirror (a) Left

(i) Type __________________

(ii) Dimension and radius curvature ___________________ (b) Right

(i) Type __________________

(ii) Dimension and radius curvature __________________ (c) Inside

(i) Type __________________

(ii) Dimension and radius curvature ___________________

(iii) One way or two ways adjustment ___________________

20

22. Meters and dash board

(a) Speedometer

(i) Type ___________________

(ii) Certification Approval ___________________ (b) Tachometer

(i) Type ___________________

(ii) Certification Approval ___________________

(c) Odometer

(i) Type __________________


(d) Other meter fitted

(i) Type __________________

(ii) Certification Approval __________________ 27. Other accessories fitted

(a) ________________________

(b) ________________________

(c) ________________________

(d) ________________________

(d) ________________________ * Standard Compliance

21

Part III. Declaration The following documents shall be submitted:-

1. Chassis frame strength calculation (For Chassis Joint only).

The strength calculation shall be attached.

Please specify the standard adopted.

Note: The measurement by strain gauge etc. may be substituted for strength calculation.

I hereby certify that to the best of my knowledge, the above information are correct and I fully understand that should any of the above information is found to untrue, the application may be rejected or the type approval certificate, if issued, may be cancelled or suspended. Date:

(Signature)

Name:

Position:

jadual i (schedule i)

Documents