dr. suhaimi bin illias year 2017 curriculum vitae · 1980-1985 sekolah rendah kebangsaan iskandar,...
TRANSCRIPT
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
1
CURRICULUM VITAE
DR. SUHAIMI BIN ILLIAS
Present Position University Lecturer (Senior Lecturer)
School of Manufacturing Engineering
Address Universiti Malaysia Perlis (UniMAP)
Kampus Alam Pauh Putra, 02600 Arau, Perlis, Malaysia
Phone +049885035
Mobile +60125806503
Email [email protected], [email protected]
Date of Birth 11 August 1978
Place of Birth Alor Setar, Kedah, Malaysia
Marial Status Married to Natasha Binti Nordin, and blessed with one children
Suhaimi bin Illias was born on August 11, 1978 in Alor Setar, Kedah. He received his Bachelor Degree
in Mechanical Engineering from Ehime University, Japan in 2003. Then in 2007, he received his
Master Degree in Mechanical Engineering from Gunma University, Japan and the Doctor of Philosophy
(PhD) in Mechanical Engineering from Saga University, Japan in 2015. His current research interests
include boiling heat transfer, droplet impact on hot surface, phase change, thermo-fluid-physics and
advanced cooling performance. Dr. Suhaimi received full scholarship from the Malaysian Government
during all his studies in Japan. He has been working with the Mechanical Engineering Division, School
of Manufacturing Engineering, Universiti Malaysia Perlis (UniMAP) since 2003. He is currently
working as a Senior Lecturer. He is a member of the Heat Transfer Society of Japan (HTSJ), American
Society of Thermal and Fluid Science (ASTFE) and the member of Board of Engineers Malaysia
(BEM), Malaysia.
He has published about 42 publications, including proceedings and international journal. He has
published 2 proceeding papers in the International Heat Transfer Conference, IHTC-13 (Sydney,
Australia) and IHTC-15 (Kyoto, Japan). This International Conference is also known as Heat Transfer
Olympic among heat transfer researchers around the world. This conference is very prestigious and is
highly respected by the heat transfer society around the world. Currently, he also has published one
journal article in SCIENTIFIC REPORTS entitled “Micro-bubble emission boiling with the cavitation
bubble blow pit” published by NPG (Nature Publishing Group).
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
2
PERSONAL INFORMATION
1. NAME : DR. SUHAIMI BIN ILLIAS
2. UNIVERSITY : UNIVERSITY MALAYSIA PERLIS, MALAYSIA
3. STAF NO. : 0100610
CURRENT POSITION
1. Senior Lecturer : Gred DS52
ACADEMIC QUALIFICATIONS
March 2015 Saga University, Japan Doctor of Philosophy (PhD) in Mechanical Engineering
March 2007 Gunma University, Japan Master of Engineering in Mechanical Engineering
March 2003 Ehime University, Japan Bachelor of Engineering in Mechanical Engineering
DISSERTATION
March 2015 Doctor of Philosophy (Ph. D) dissertation
Boiling transition phenomena beneath a sessile droplet on high temperature
surface
March 2007 Master of Engineering dissertation
The effect of heating surface material on evaporation behavior of impinging
droplet
March 2003 Bachelor of Engineering dissertation
Experimental studies of the beginning point of boiling
CGPA
Doctor of Philosophy 4.0
Master of Engineering 4.0
WORKING EXPERIENCE
1. March 2015 – till now
Senior Lecturer, Universiti Malaysia Perlis, Malaysia
School of Manufacturing Engineering (Mechanical Eng. Division)
Universiti Malaysia Perlis, MALAYSIA.
2. April 2007 – March 2015
Lecturer, Universiti Malaysia Perlis, Malaysia
School of Manufacturing Engineering (Mechanical Eng. Division)
Universiti Malaysia Perlis, MALAYSIA.
3. 15 May 2009 – 27 Februari 2011
Program Chairman
School of Manufacturing Engineering
Universiti Malaysia Perlis MALAYSIA
4. November 2003
Teaching Engineer, KUKUM November 2003
Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM)
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
3
ADMINSTRATION POSITION
1. Program Chairman
Degree Manufacturing Engineering
School Of Manufacturing Engineering
Unversiti Malaysia Perlis, Malaysia
(May 2009 – Feb 2011)
2. Committee Members (Exco)
School Of Manufacturing Engineering
(May 2009 – Feb 2011)
EXPERTISE AND SPECIALISATION
1. Heat Transfer
2. Boiling Heat Transfer
3. Thermo-fluid-physics
4. Statics
5. Dynamics
PROFESIONAL MEMBERS
1. Member – Heat Transfer Society of Japan (HTSJ) – 3362
2. Member – Board of Engineer Malaysia (BEM) - 66171A
3. Member – The Institution of Engineers Malaysia (IEM) – 47634
4. Member – American Society of Thermal and Fluids Engineers (ASTFE) – 10090
EARLY EDUCATION
1980-1985 Sekolah Rendah Kebangsaan Iskandar, Alor Setar, Kedah, Malaysia.
1991-1993 Kolej Sultan Abdul Hamid, Alor Setar, Kedah, Malaysia.
1994-1995 Maktab Rendah Sains Mara, Beseri, Perlis, Malaysia.
1996-1997 Ambang Asuhan Jepun, Universiti Malaya, Kuala Lumpur, Malaysia.
RESEARCH GRANT
National
1. Short Term Grant UniMAP
Preliminary Study of Cement Mixture Using Waterfall Stone Powder and Construction
Waste
Grant Number : 9001-000183
Joint Collaboration with Cement Industries Malaysia Sdn. Bhd. (CIMA)
Main Researcher : Suhaimi bin Illias
Amount : RM 10,000.00
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
4
2. Fundamental Research Grant Scheme (FRGS)
Fundamental Study of Fracture Mechanics Analysis of Multiple Edge Cracks Using
Multiple Sharp Cuts
Dr. Muhamad Saifuldin Abdul Manan, Dr.Haftirman, Mr. Suhaimi Illias, Mr. Ahmad
Syayuthi Abdul Rahman, Mr. Azmi Harun, Mr. Mohd. Nasir Mat Saad
Co-Researcher : Suhaimi bin Illias
Amount : RM 41,000.00
3. Anugerah Kecemerlangan SLAB/SLAI
Tabung Penyelidikan Jangka Pendek
Grant Number : 9009-000280
Main Researcher : Suhaimi bin Illias
Amount : RM 10,000.00
4. Fundamental Research Grant Scheme (FGRS)
FRGS 2015-1
Spray characteristics in multiple-fluid atomizer operating with palm based biofuels blend
Grant Number : 9003-00537
Dr. Mohamad Shaiful Ashrul Ishak, Prof. Dr. Nazry Jaafar, Dr. Abdul Haqi Bin Ibrahim,
Dr. Suhaila Hussain, Dr. Suhaimi Illias
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 59,243.00
5. Fundamental Research Grant Scheme (FRGS)
FRGS 2015-1
Fundamental Study of Droplet Evaporation Process for Heat Transfer Optimization
Dr. Suhaila Hussain, Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Kartini Alir,
Atikah Awang, Shafizan Shariffuddin
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 61,305.00
6. Prototype Research Grant Scheme (PRGS)
PRGS 2016-1
Multiple Inlet Swirler Stabilized Burner Inside Gas Turbine For Biofuels Combustion
Dr. Mohamad Shaiful Ashrul Ishak, Prof. Dr. Nazry Jaafar, Dr. Suhaimi Illias, Dr. Suhaila
Hussain
Co-Researcher : Dr. Suhaimi bin Illias
Amount : RM 121,000.00
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
5
Research Grant Amount
1. Short Term RM 10,000.00
2. FRGS RM 41,000.00
3. Excellent Award RM 10,000.00
4. FRGS RM 59,243.00
5. FRGS RM 61,305.00
6. PRGS RM 121,000.00
Total RM 302,548.00
EXHIBITION
National
1. Ekspo Rekacipta & Penyelidikan UniMAP 2008
Cement Mixture Using Waterfall Stone
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Bronze Medal
2. Ekspo Rekacipta & Penyelidikan UniMAP 2009
Commercial Product From Sandstone
Suhaimi ILLIAS, Dr. Saifuldin Abdul Manan, Mohamad Hatta Musa
Narzrezal Abdul Razak
Bronze Medal
3. Ekspo Rekacipta & Penyelidikan UniMAP 2010
Low Cost Product From Rice Husk
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Gold Medal
4. Ekspo Rekacipta & Penyelidikan UniMAP 2015
Portable Mucus Sucking Kit (Pomus Kit)
Dr. Suhaimi Illias, Dr. Shaiful Ashrul Ishak, Dr. Suhaila Hussain, Dr. Humaizi Hilmi, En.
Jamali, En. Hatta Musa, En. Narzrezal Abdul Razak
Gold Medal
5. Ekspo Rekacipta & Penyelidikan UniMAP 2016
Pulse Jet Air Dryer
Ir. Dr. Mohamad Shaiful Ashrul Ishak, Dr. Suhaimi Illias, Dr. Suhaila Hussain, Dr. Mohd.
Nazri Omar, Nor Zaiazmin Yahaya, Amirah Mohamad Sahar, Muhammad Roslan Rahim,
Suhelmi Senawi
Gold Medal (Best of the Best Award)
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
6
International
1. 20th
International Invention, Innovation & Technology Exhibition ITEX 2009,
Kuala Lumpur, MALAYSIA
Cement Mixture Using Waterfall Stone Powder
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Bronze Medal
2. 21st International Invention, Innovation & Technology Exhibition ITEX 2010,
Kuala Lumpur, MALAYSIA
Commercial Product from Sandstone Powder
Suhaimi ILLIAS, Dr. Muhamad Saifuldin Abdul Manan, Mohamad Hatta Musa,
Narzrezal Abdul Razak
Silver Medal
3. 22nd
International Invention, Innovation & Technology Exhibition ITEX 2011, Kuala
Lumpur, MALAYSIA
Low Cost Product From Rice Husk
Suhaimi ILLIAS, Mohamad Hatta Musa, Narzrezal Abdul Razak
Silver Medal
PUBLICATIONS
Article in Proceedings and Journals
2005
1. Generation of microbubble in the droplet collision boiling system.
Shigeaki Inada* , Kazuaki Shinagawa, Suhaimi Illias .
The 42th National Heat Transfer Symposium, Sendai Japan 2005.
2006
2. The effect of heating surface material on the miniaturization boiling in the droplet
collision boiling system’.
Suhaimi Illias*, Shigeaki Inada, Hikaru Ono.
The 43th National Heat Transfer Symposium, Nagoya , Japan 2006
3. Effects of wettability of heating surface materials on the miniaturization boiling in a
droplet collision boiling system.
Suhaimi Illias*, Shigeaki Inada.
International Symposium on Micro and Nano Technology, Taiwan 2006.
4. Mechanism elucidation for the miniaturization boiling phenomenon in droplet collision
boiling system.
S.Inada*, H. Sumiya, K.Shinagawa, S.Illias .
International Heat Transfer Conference, IHTC-13, Australia 2006.
2007
5. A Study of the dispersion Behavior of a droplet colliding with a heating surface.
Kazuaki SHINAGAWA*, Suhaimi ILLIAS, Hisanobu KAWASHIMA, Shigeru Uchiyama,
Yoshimitsu TAKAHASHI, Shigeaki INADA.
The 44th National Heat Transfer Symposium, Nagasaki, Japan 2007.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
7
6. Effects of Wettability of Heating Surface Materials on the Miniaturization Boiling and
Film Boiling in the Droplet Collision Boiling System.
Suhaimi Illias * , Hazry Desa and Wan Abdul Rahman
International Symposium on Advanced Technology MJISAT 2007, Kuala Lumpur.
7. Effects of Wettability and Materials Morphology on the Miniaturization Boiling.
S.Illias*, M.A.Idris, M.A.A.Halim, A.Mohamad.
Conference on Applications and Design in Mechanical Engineering CADME 2007, Perlis,
MALAYSIA
8. Development on multiobjective fuzzy optimization method in intelligent machinery
application’.
M.A.A.Halim*, A.H.Adom, A.Mohamad, S.Illias.
Conference on Applications and Design in Mechanical Engineering CADME 2007, Perlis.
2008
9. Effects of Wettability of Heating Surface Materials on the Film Boiling.
S.Illias*, M.A.Idris, W.A.Rahman, H. Azmi, M.A.A. Halim.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
10. Application of Wireless Power Transmission for Biomedical Implantable Organ H.Mansor
*, M.A.A.Halim, M.Y.Mashor, S.Illias.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
11. GD&T Applied on Engineering Drawing. H.Azmi
*, Z.Shayfull, K.Akmal, S.Illias.
Malaysian Technical Universities Conferences on Engineering and Technology MUCET 2008,
Perlis.
12. Elucidation of Miniaturization Boiling Mechanism in the Droplet Collision Boiling
System
Shigeaki Inada*, Hisanobu Kawashima, Kazuaki Shinagawa, Suhaimi Illias, Manabu
Nakagawasai, Kohei Hayasaka
The Seventh JSME-KSME Thermal and Fluids Engineering Conference
13-16 October 2008, Sapporo, JAPAN.
2009
13. The Concept and Application of Miniaturization Boiling in Cooling System Suhaimi ILLIAS
* and Muhammad Asri IDRIS
International Nuclear Conference 2009 INC 09
29 June – 1 July 2009 PWTC, Kuala Lumpur, MALAYSIA
14. Visual Studies on Film Boiling
S.Illias*, M.A.Idris, M.S.Abdul Manan, H. Azmi, M.F.Ghazali
International Conference on Applications and Design in Mechanical Engineering, ICADME
11-13 Oktober 2009 Hotel Bayview, Penang, MALAYSIA
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
8
15. Study of non – Uniform Stress Distribution to Predict Stress Intensity Factors of Two
Edge Cracks
M.S.Abdul Manan*, S.Illias and K.A.Ismail
International Conference on Applications and Design in Mechanical Engineering, ICADME
11-13 Oktober 2009 Hotel Bayview, Penang, MALAYSIA
16. Modification of Weight Function Method to Predict Stress Intensity Factors of Two
Cracks M.S.Abdul Manan
*, S.llias, M.F Ghazli
Malaysian Technical Universities Conference on Engineering and Technology, MUCET
June 20-22, 2009, MS Garden, Kuantan Pahang, MALAYSIA
17. Change-over Time Improvement through Single Minute Exchange of Die (SMED)
Technique M.F.Ghazali
*, R. Muhammad, Z.Shayfull, S.Illias and R.Hamidon
International Conference on Advances in Mechanical Engineering, ICAME
24-25 June 2009, Shah Alam, MALAYSIA
18. Analyzing Benefits of 5S : A Process Sector Case Study M.F.Ghazali
*, R.Muhammad, Z.Shayfull, S.Illias
International Conference on Advances in Mechanical Engineering, ICAME
24-25 June 2009, Shah Alam, MALAYSIA
2010
19. Visual Studies Of A Droplet Dispersion Behavior On Material Heated Surface
S.Illias*, O.Inayatullah, M.S. Abdul Manan, M.F. Ghazali, M.A.Idris
Seminar Kebangsaan Aplikasi Sains dan Matematik, SKASM 2010
8-10 Dis 2010, Johor Bahru, MALAYSIA
20. Analisis Isyarat Pancaran Akustik Dalam Pemantauan Kelikatan Minyak Enjin : Nilai
Purata Amplitud (NPA)
O. Inayatullah*, S.Illias, M. S. A. Manan, N. Jamaludin, M.J.M.Nor, F. Mat
Seminar Kebangsaan Aplikasi Sains dan Matematik, SKASM 2010
8-10 Dis 2010, Johor Bahru, Malaysia.
2011
21. The Concept and Application of Miniaturization Boiling In Reactor Cooling System
S.Illias*, M.A.Idris, M.Z.M. Zain
International Review of Mechanical Engineering (IREME) : May Edition
[International Journal : Indexed in Scopus]
22. Experimental Studies of Film Boiling Phenomena on Carbon Heated Surface
S.Illias*, M.A.Idris, M.Z.M. Zain
International Review of Mechanical Engineering (IREME) : July Edition
[International Journal : Indexed in Scopus]
2012
23. Measurement of Surface Temperature and Surface Heat Flux During Impact of a
Droplet on Hot Surface
Y. Mitsutake*, S. Illias, A.K. Mozumder, M.Monde
The 49th National Heat Transfer Symposium, Toyama , Japan 2012
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
9
24. Improvement of corrosion resistence of Rare Earth Element (REE) Based Anodic
Oxidation Coating on AZ91D Magnesium Alloy
M.Z.M. Zain*, S. Illias, M. Mat Salleh, K.A Ismail, Z. Nooraizedfiza
Applied Mechanics and Materials Vol. 187 (2012) pp 210-214
25. Measurement and Observation of Transient Boiling Phenomena During Sudden Contact
of Ethanol Droplet with Hot Surface
Y. Mitsutake*, S. Illias, A.K. Mozumder, M. Monde
Proceeding of 4th Asian Joint Workshop on Thermophysics and Fluid Science, October 14-17,
2012, Busan, Korea.
2013
26. Visual Studies and Measurement of Surface Temperature and Surface Heat Flux During
Impact of a Droplet on Hot Surface
S. Illias*, K. Kenryu, N. Ryosuke, Y. Mitsutake, M. Monde
The 50th National Heat Transfer Symposium, Sendai , Japan 2013
27. Effect of heat treatment on microstructure and corrosion behavior of Az91d magnesium
aloi
T. C. Lih*, M.Z.M. Zain, S. Norbahiyah, K.A. Ismail, M.N.B. Derman, S. Illias
Advanced Material Research Vol. 685 (2013) , pp. 102-106.
2014
28. Experimental Study of generation time of stable vapor film during impact of a single
and multiple droplet on hot surface
S. Illias*, Y. Kojima, N. Koto, S. Fukushima, Y. Yamashita, Y. Mitsutake, M. Monde
The 51st National Heat Transfer Symposium, Hamamatsu , Japan 2014
29. Generation Time of Stable Vapor Film during Impact of a Droplet on Hot Surface S. Illias
*, M. N. Hasan, Y. Mitsutake, M. Monde
Thermal Science and Engineering, Vol. 22, No. 2(2014), pp. 21.
30. High Speed Observation and Measurement of Surface Tempearture and Surface Heat
Flux During Impact of a Droplet on Hot Surface
S. Illias*, M. N. Hasan, Y. Mitsutake, M. Monde
International Heat Transfer Conference, IHTC-15, Kyoto, 2014.
31. Homogeneous Boiling Explosion Condition : From an Energy Point of View
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
International Conference on Mechanical Engineering 2013, (ICME2013) 20-21 June, Dhaka,
Bangladesh
32. Characteristics of Homogeneous Nucleation Boiling in Ethanol during Rapid Linear
Boundary Heating
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
International Conference on Mechanical Engineering 2013, (ICME2013) 20-21 June, Dhaka,
Bangladesh
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
10
33. Measurement and observation of elementary transition boiling process after sudden
contact of liquid with hot surface
Y. Mitsutake, S. Illias, K. Tsubaki, M.N. Hasan, M. Monde
6th BSME International Conference on Thermal Engineering (ICTE 2014), 19-21 December
2014, Dhaka, Bangladesh.
34. Homogeneous Boiling Explosion Condition : From an Energy Point of View
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
Procedia Engineering 90 (2014) 618-623.
35. Characteristics of Homogeneous Nucleation Boiling in Ethanol during Rapid Linear
Boundary Heating
M. N. Hasan*, A. Hasan, S. Illias, Y. Mitsutake, M. Monde
Procedia Engineering 90 (2014) 624-630.
36. Experimental Investigation of Stable Vapor Film Generation Time and Wetting
Temperature Shift during Impact of a Droplet with Hot Surface
Suhaimi Illias, Shinpei Fukushima, Hisayoshi Soejima, Yuichi Mitsutake, Masanori Monde
Proceedings of 5th Asian Joint Workshop on Thermophysics and Fluid Science
September 23-26, 2014, Nagasaki, Japan.
2015
37. Measurement and observation of elementary transition boiling process after sudden
contact of liquid with hot surface
Y. Mitsutake*, S. Illias, K. Tsubaki, M.N. Hasan, M. Monde
Procedia Engineering, Vol 105, pp. 5-21 (2015).
38. Characteristics of transient heat transfer and wetting phenomena during laminar jet
quenching on rotating cylinder
Shinya Tsuboyama*, Tomofumi Higashi, Yuichi Mitsutake, Suhaimi Illias, Aloke Kumar
Mozumder, Koutarou Tsubaki, Masanori Monde
Procedia Engineering, Vol 105, pp. 787-797 (2015).
39. Application of the spray quenching to T6 heat treatment of thick A6061 hollow cylinders Hisayoshi Soejima
*, Yuichi Mitsutake, Suhaimi Illias, Koutarou Tsubaki, Masanori Monde
Procedia Engineering, Vol 105, pp. 776-786 (2015).
2016
40. Micro-bubble emission boiling with the cavitation bubble blow pit
Shigeaki Inada*, Kazuaki Shinagawa, Suhaimi Bin Illias, Hiroyuki Sumiya, Helmisyah A.
Jalaludin
Scientific Reports 6, 33454.
41. Performance of Palm Oil-Diesel Blending inside Liquid Spray Burner
M. S. A. Ishak*, S. Illias, M. N. M. Jaafar
International Journal of Applied Engineering Research 11 (8), 6003-6006.
42. High speed visualization and analysis of maximum spreading of water droplet during
impact on hot horizontal surface
S. Illias*, M. S. A. Ishak, S. Hussain, K. A. Ismail
International Journal of Applied Engineering Research, Vol. 11 (22) pp. 10382-10387.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
11
2017
43. Visual study of droplet bouncing phenomena upon impact on hot horizontal surface
S. Illias, S. Hussain, M. S. A. Ishak, M. Z. M. Zain and M. A. Idris
International Journal of Applied Engineering Research, Vol. 12 (7) pp. 1305-1310.
2018
44. On the equations solved for droplet evaporation simulation S. Hussain and S. Illias
International Journal of Applied Engineering Research, Vol. 13 (6) pp. 3182-3186.
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
12
SUBJECT TAUGHT
Academic Session 2007/2008 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics (Material)
Academic Session 2008/2009 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics (Material)
Academic Session 2009/2010 First Semester EPT 101 Engineering Mechanics
Second Semester EPT 101 Engineering Mechanics (Material)
Academic Session 2010/2011 First Semester EPT 101 Engineering Mechanics
Second Semester EBT 131 Engineering Mechanics (Material)
Academic Session 2011/2012 First Semester EPT 212 Dynamics
Second Semester Further studies (PhD)
Academic Session 2012/2013 First Semester Further studies (PhD)
Second Semester Further studies (PhD)
Academic Session 2013/2014 First Semester Further studies (PhD)
Second Semester Further studies (PhD)
Academic Session 2014/2015 First Semester Further studies (PhD)
Second Semester EPT 324 Heat Transfer
Dr. Taufiq*/Dr. Suhaimi
Academic Session 2015/2016 First Semester EPT 212 Dynamics
Dr. Suhaimi*
Second Semester EPT 324 Heat Transfer
Dr. Suhaimi*/Dr. Taufiq
Academic Session 2016/2017 First Semester EPT 212 Dynamics
Dr. Ezral*/Dr. Suhaimi
Second Semester EPT 324 Heat Transfer
Dr. Suhaimi*/Dr. Taufiq
Academic Session 2017/2018 First Semester EPT 212 Dynamics
Dr. Ezral*/Dr. Suhaimi
Second Semester EPT 324 Heat Transfer
Dr. Suhaimi*/Dr. Taufiq
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
13
Final Year Project (FYP) Supervision
Undergraduate
FYP 2007/2008
1. NABIL FIKRI BIN ABD AZIZ (041050435)
Status: Completed
2. TUAN KHAIRUL AFZAN BIN TUAN MUHD SUKELI (041050650)
Status: Completed
FYP 2008/2009
3. MUHAMMAD FARHAN BIN MUHAMMAD TOHA (051050454)
Status: Completed
4. AHMAD HAFIFE BIN HAMZAH (051050034)
Status: Completed
5. MAZILA BINTI MAMAT (051050261)
Status: Completed
6. NORULHAMKHA BINTI ABDUL BASIR (051050554)
Status: Completed
7. NORSUHAILA BINTI ZAKARIA (051120553)
Status: Completed
FYP 2009/2010
8. CHUNG LEE PING (061050136)
Status: Completed
9. MOHD HALIM BIN TUKIMIN (071050475)
Status: Completed
10. MUHAMAD AIMAN BIN ABOL HASSAN (071050541)
Status: Completed
11. MOHD HAFIZ BIN RODZI (071050470)
Status: Completed
FYP 2010/2011
12. FONG AI PENG (071050175)
Status: Completed
13. KOW PHEI YING (071050284)
Status: Completed
14. ANG ENG TATT (071050064)
Status: Completed
15. TAI JIN CHANG (071050969)
Status: Completed
CURRICULUM VITAE DR. SUHAIMI BIN ILLIAS YEAR 2017
14
FYP 2011/2012
Study Leave-PhD
FYP 2012/2013
Study Leave-PhD
FYP 2013/2014
Study Leave-PhD
FYP 2014/2015
Study Leave-PhD
FYP 2015/2016
16. KASTHURI A/P P PANICHELVAM (131050662)
Status: Completed
17. MOI CHUAN SIN (121121044)
Status: Completed
18. GOH WAN GIN (121122631)
Status: Completed
19. MARDHIAH BINTI ABDUL WAHAB (121120740)
Status: Completed
20. TEEVAGAR GABRIALNAYAGAM (131052716)
Status: Completed
21. AZRA IDZKANDAR BIN ABU ZAHAR (121050215)
Status: Completed
FYP 2016/2017
22. FATKHUL AMIN BIN MOHD MOKHLAS (141050769)
Status: Completed
23. MOHD AREEB BIN ANUA (141050788)
Status: Completed
24. HEMALA A/P N JEYAPRAKS (131050581)
Status: Completed