curriculum vitae - home | faculty of …€¦ · · 2017-02-28curriculum vitae a. butir-butir...
TRANSCRIPT
1 / 2
CURRICULUM VITAE
A. BUTIR-BUTIR PERIBADI (Personal Details)
Nama Penuh (Full Name)
Azmin Shakrine Bin Mohd Rafie Gelaran Dr.
(Title)
No. MyKad / No. Pasport (Mykad No. / Passport No.)
740220-08-5995
Warganegara (Citizenship)
Malaysian
Bangsa (Race)
Malay
Jantina (Gender)
Male
Jawatan (Designation)
Senior Lecturer Tarikh Lahir (Date of Birth)
20 February 1974
Alamat Semasa (Current Address)
Jabatan/Fakulti (Department/Faculty)
E-mel dan URL (E-mail Address and URL)
Aerospace Department, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor Tel: 03-89466400 Fax: 03-86567125
Aerospace Department, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor Tel: 03-89466394 Fax: 03-86567125
[email protected] H/P: 012-3256754
B. KELAYAKAN AKADEMIK (Academic Qualification)
Nama Sijil / Kelayakan (Certificate / Qualification obtained)
Nama Sekolah Institusi (Name of School / Institution)
Tahun (Year
obtained)
Bidang
pengkhusususan (Area of Specialization)
Doctor of Philosophy Universiti Putra Malaysia 2007 Aerospace
Master of Engineering (Mechanical)
Universiti Teknologi Malaysia 2003 Aeronautic
Bachelor of Mechanical Engineering (Aeronautic)
Universiti Teknologi Malaysia 1999 Aeronautic
Diploma in Mechanical Engineering (Aeronautic)
Universiti Teknologi Malaysia 1995 Aeronautic
C. KEMAHIRAN BAHASA (Language Proficiency) Bahasa
(Language)
Lemah
Poor (1)
Sederhana
Moderate (2)
Baik
Good (3)
Amat Baik
Very good (4)
Cemerlang
Excellent (5)
English √
Bahasa Melayu √
Chinese
Lain-lain (other):
2 / 2
D. PENGALAMAN SAINTIFIK DAN PENGKHUSUSAN (Scientific experience and Specialisation) Organization Position Start Date End Date Expertise
Wind Tunnel Testing for Commercial Street Lamp
Project Leader
8 October 2012
8 November 2012
Experimental Aerodynamics
Heat Analysis using FLIR Thermal Camera
Project Leader
27 August 2012
10 September
2012 Heat Transfer
Characteristic of Hollow Cone Sprays Emanating from Swirl Optimizer
Project Leader
2 May 2012 2 June 2012 Experimental Aerodynamics
Gun Tunnel Impact Test Project Assistance
26 May 2009
10 June 2009 Material and Structures
Wind Loading Testing for Commercial Street Lantern Types PTEX STL VIII, IX and XII
Project Leader
4 February 2009
4 March 2009 Experimental Aerodynamics
NIKKON S419-150 HPS150W and S419-250 HPS250W Wind Tunnel Test
Project Assistance
25 August 2008
25 September
2008
Experimental Aerodynamics
Wind Tunnel Testing for Vortex Generator
Project Assistance
22 July 2008
22 August 2008
Experimental Aerodynamics
Wind Loading Testing for Commercial Street Lantern Types PTEX STL I, II, III and IV
Project Leader
1 July 2008 1 August
2008 Experimental Aerodynamics
Assessing the Resonance Frequency for a Flat Plate Panel Mounting System on a MARITIME Helicopter using Modal Testing Technique
Project Assistance
12 May 2008
26 May 2008 Structural Vibration
Wind Loading Test NIKKON S419-150 Street Lantern Model
Project Assistance
15 February 2008
14 March 2008
Experimental Aerodynamics
Wind Tunnel Testing for Street Lantern
Project Leader
4 February 2008
4 March 2008 Experimental Aerodynamics
Wind Tunnel Testing for Street Lantern
Project Assistance
29 January 2008
28 February 2008
Experimental Aerodynamics
Street Lantern Wind Loading Test
Project Assistance
3 January 2008
3 February 2008
Experimental Aerodynamics
Commercial Street Lamp Wind Tunnel Testing
Project Assistance
5 April 2007 5 May 2007 Experimental Aerodynamics
3 / 2
E. PEKERJAAN (Employment) Majikan / Employer Jawatan /
Designation
Jabatan /
Department
Tarikh lantikan /
Start Date
Tarikh tamat /
Date Ended
Universiti Putra Malaysia Tutor Aerospace 06 Mei 2002 14 Nov 2007
Universiti Putra Malaysia Senior Lecturer Aerospace 15 Nov 2007 Recent
F. ANUGERAH DAN HADIAH (Honours and Awards) Name of awards Title Award Authority Award Type Year Academic Awards CROPS – A Decision
Making Aid Tool for Product Redesign
Pameran Reka Cipta, Penyelidikan dan Inovasi Malaysia 2012
Bronze Medal
2012
Design and Optimization of a Woven Fiber-Reinforced Composite Wing
Pameran Reka Cipta, Penyelidikan dan Inovasi UPM 2006
Bronze Medal
2006
Non-Academic Awards
Anugerah Kecermelangan dalam Pengajaran Tahun 2012
Faculty of Engineering UPM Certificate 2012
Anugerah Kecermelangan dalam Pengajaran Tahun 2011
Faculty of Engineering UPM Certificate 2011
Anugerah Kecermelangan dalam Pengajaran Tahun 2010
Faculty of Engineering UPM Certificate 2010
Anugerah Kecermelangan dalam Pengajaran Tahun 2009
Faculty of Engineering UPM Certificate 2009
Awards of Merit
Perkhidmatan Cemerlang 2011
Universiti Putra Malaysia
Certificate 2012
Anugerah Pengajaran Putra 2009
Universiti Putra Malaysia
Certificate 2009
G. SENARAI PENERBITAN (Sila masukan nama pengarang, tajuk, nama jurnal,
jilid, muka surat dan tahun diterbitkan) (List of publications – author (s), title, journal, volume, page
and year published) Journal 1. A. Attaran, D. L. Majid, S. Basri, A. S. Mohd Rafie, E. J.
Abdullah (2007). Structural Optimization of an
Aeroelasticity Tailored Composite Flat Plate mode of Woven
Fiberglass/epoxy. Acta Mechanica. Netherlands.
2. M. M. Fakir, S. Basri, R. Varatharajoo, A. A. Jaafar, A. S.
M. Rafie, D. L. A. Majid (2008). Extended Conventional
Finite Element Method vs. Differential Quadrature
Comparison in Two-dimensional Heat Transfer Problem.
IREASE. Italy.
3. M. M. Fakir, S. Basri, R. Varatharajoo, A. A. Jaafar, A. S.
4 / 2
M. Rafie, D. L. A. Majid (2008). Comparison of Optimum
Finite Element Method vs. Differential Quadrature Method
in Two-dimensional Heat Transfer Problem. IREME. Italy.
4. Rizal Zahari, Abdul Hannan Azmee, Faizal Mustapha, Mohd
Sapuan Salit, Renuganth, Azmin Shakrine (2008).
Prediction of Progressive Failure in Woven Glass/Epoxy
Composite Laminated Panels. Jurnal Mekanikal, June
2008, No. 25, pp 80-91.
5. A. S. Mohd Rafie, S. Basri, R. Varatharajoo, D. L. Majid,
A. H. Mohamed Ariff (2009). Aeroelasticity Analysis for
Eagle 150b Aircraft Wing. IREASE. Italy.
6. N. Yidris, R. Zahari, D.L. Majid, F. Mustapha, M.T.H.
Sultan, A.S.M. Rafie (2010). Crush Simulation of Woven C-
Glass/Epoxy Unmanned Ariel Vehicle Fuselage Section.
International Journal of Mechanical Engineering
(IJMME), Vol. 5, No.2, pp 260-267.
7. Romli F.I., Mohd Rafie A.S. (2011). Derivation of Strategic
Solution Space for Product Redesign Planning.
International Review of Aerospace Engineering, Vol.4,
No.1, pp 12-19.
8. A.A. Ramadhan, A.R. Abu Talib, A.S. Mohd Rafie, R.
Zahari. (2012). Experimental and Numerical Simulation of
Energy Absorption on Composite Kevlar29/Polyester Under
High Velocity Impact. Journal of Advanced Science and
Engineering Research 2 (JASER), pp 52-67.
9. A. Attaran, D.L. Majid, S. Basri, A.S. Mohd Rafie, E.J.
Abdullah. (2011). Structural Optimization of an
Aeroelastically Tailored Composite Flat Plate made of
Woven Fiberglass/epoxy. Aerospace Science and
Technology, Elsevier, pp 393-401.
10. Z.A. Rasid, R. Zahari, A. Ayob, D.L. Majid and A.S.M.
Rafie. (2011). Thermal Post-buckling of Shape Memory
Alloy Composite Plates under Non-uniform Temperature
Distribution. World Academy of Science, Engineering and
Technology, Vol. 56, pp 1465-1470.
11. M.T.H. Sultan, F. Mustapha, A.S.M. Rafie, D.L. Majid and
M.R. Ajir. (2011). Impact Damage Detection and
Quantification for CFRP Laminates Subjected to Low
Velocity Impact Damage – A NDT Approach. The Official
Journal of Malaysian Society for Non-Destructive
Testing, NDT SPECTRA Issue 5, pp 15-20.
5 / 2
12. H. Djojodihardjo, M.F. Abdul Hamid, A.A. Jaafar, S. Basri,
F.I. Romli, F. Mustapha, D.L.A. Abdul Majid and A.S.
Mohd Rafie. (2013). Computational Study on the
Aerodynamic Performance of Wind Turbine Blade Airfoil
Fitted with Coanda Jet. Journal of Renewable Energy,
Hindawi. ISSN 2314-4386.
13. M.F. Abdul Hamid, H. Djojodihardjo, A.A. Jaafar, S. Basri,
F.I. Romli, F. Mustapha, D.L.A. Abdul Majid and A.S.
Mohd Rafie. (2011). Computational Study on the Influence
of Coanda Jet on Wind Turbine Blades. Renewable Energy.
ISSN 0960-1481 pp 30.
14. A.A. Ramadhan, A.R. Abu Talib, A.S. Mohd Rafie, R.
Zahari. (2013). High Velocity Impact Response of Kevlar-
29/epoxy and 6061-T5 Aluminum Laminated Panels.
Material and Design Vol. 43, pp 307-321.
15. A.R. Abu Talib, A.A. Ramadhan, A.S. Mohd Rafie, R.
Zahari. (2013). Influence of Cut-out Hole on Multi-layer
Kevlar 29/epoxy Composite Laminated Plates. Material and
Design Vol. 43, pp 89-98.
Journal Scopus 1. Surjatin Wiriadidjaja, Mohd Rafie A.S., F.I. Romli and O.K.
Ariff. (2012). Aerodynamic Interference Correction Methods
Case: Subsonic Closed Wind Tunnels. Applied Mechanics
and Materials Vol. 225. pp 60-66.
2. Surjatin Wiriadidjaja, Fadilah Hasim, Shuhaimi Mansor,
Waqar Asrar, Azmin Shakrine Mohd Rafie, Ermira Junita
Abdullah. (2012). Subsonic Wind Tunnels in Malaysia: A
Review. Applied Mechanics and Materials Vol. 225. pp
566-571.
3. X.H. Cheong, A.S. Mohd Rafie, F.I. Romli, M.T. Hameed
Sultan and N. Yidris. (2012). A Study on the Effect of
Upstream Square Blockage of a Rotating Cylinder. Applied
Mechanics and Materials Vol. 225. pp 13-17.
4. Yogeswaran Sinnasamy, Noor Arbiah Yahya, ShahNor
Basri, Abdul Aziz Jaafar and Azmin Shakrine Mohd Rafie.
(2012). Assessment on Effects of Under-Relaxation Factors
on 2D Incompressible Laminar Flow over a Backward-
Facing Step (BFS). Applied Mechanics and Materials Vol.
6 / 2
225. pp 55-59.
5. M.T. Hameed Sultan, S. Basri, A.S. Mohd Rafie, F.
Mustapha, D.L. Majid, M.R. Ajir. (2011). High Velocity
Impact Damage Analysis for Glass Epoxy-Laminated Plates.
Advanced Materials Research Vols. 399-401. pp 2318-
2328.
6. Nuraishah Bazilah Affandi, Azmin Shakrine Mohd Rafie,
Shahnor Basri, Fairuz Izzuddin Romli, Dayang Laila Abang
Abdul Majid, Faizal Mustapha (2011). A Preliminary Study
on Translational Kinetic Energy Absorption Using Coconut
Fiber (Coir) Sheets as a Potential Impact-worthy Constituent
in Advanced Aerospace Material. Key Engineering
Materials Vols. 471-472, pp 1028-1033.
7. Z.A. Rashid, S.A. Mazlan, A. Ayob, R. Zahari, D.L. Majid,
A.S. Mohd Rafie. (2012). The Strain Energy Tuning of the
Shape Memory Alloy on the Post-Buckling of Composite
Plates using Finite Element Method. Advanced Materials
Research Vol. 445, pp 577-582.
8. Rizal Zahari, Faizal Mustapha, Dayang Laila Abd Majid,
Azmin Shakrine and Thariq Hameed Sultan. (2012).
Geometric Non-linear Analysis of Composite Laminated
Plates using Higher Order Finite Strip Element. Applied
Mechanics and Materials Vol. 225. pp 165-171.
9. Zainudin A Rashid, Rizal Zahari, A. Ayob, D.L. Majid and
A.S.M. Rafie. (2011). Thermal Post-Buckling Improvements
of Laminated Composite Plates using the Active Strain
Energy Tuning Approach. Advanced Materials Research
Vols. 311-313, pp 2235-2238.
10. Fairuz I. Romli, Ahmad Nizam Alias, Azmin Shakrine
Mohd Rafie, Dayang Laila Abang Abdul Majid. (2012).
Factorial Study on the Tensile Strength of a Coir Fiber-
Reinforced Epoxy Composite. AASRI Procedia 3, pp 242-
247.
7 / 2
11. Fairuz I Romli, Surjatin Wiriadidjaja and Azmin Shakrine
Mohd Rafie. (2012). A Preliminary Study of Baseline
Design Architecture Effects on Aircraft Redesign Risks.
Applied Mechanics and Materials Vol. 225, pp 287-292.
12. Fairuz I. Romli, Cheang Kian Hou, Chew Junxian and
Azmin Shakrine Mohd Rafie. (2011). Subsystems Change
Ranking Methodology (SCRaM) for Complex Product
Redesign Process. Advanced Materials Research Vols.
308-310, pp 167-173.
13. M.T.H. Sultan, A.S.M. Rafie, N. Yidris, F. Mustapha, D.L.
Majid. (2012). Damage Classification in CFRP Laminates
using Principle Component Analysis (PCA) Approach.
Applied Mechanics and Materials Vol. 225, pp 189-194.
14. A.A. Ramadhan, A.R. Abu Talib, A.S. Mohd Rafie, R.
Zahari. (2012). The Behaviour of Fibre-Metal Laminates
under High Velocity Impact Loading with Different Stacking
Sequences of Alloy. Applied Mechanics and Materials
Vol. 225, pp 189-194.
15. N. Yidris, J. Loughlan, M.T.H. Sultan, A.S.M. Rafie.
(2012). Failure Mechanics of Uniformly Compressed Thin-
Walled Box-Section Struts. Applied Mechanics and
Materials Vol. 225, pp 172-177.
16. M.T.H. Sultan, N. Yidris, F. Mustapha, A.S.M. Rafie, D.L.
Majid. (2012). Damage Identification and Classification in
CFRP Laminates – A SEM Based Study. Applied
Mechanics and Materials Vol. 225, pp 138-143.
17.
Books/Monographs 1. R. Varatharajoo, E.J. Abdullah, D.L. Majid, F.I. Romli, A.S.
Mohd Rafie and K.A. Ahmad (2012). AEROTECH IV: Recent
Advances in Aerospace Technologies. Trans Tech Publications.
2. A.S. Mohd Rafie, S. Basri, R. Varatharajoo, N. Md Isa, W.M.I
Hassan, S.A. Samin, A.S. Mohd Harithuddin, N.A. Md Zulkifly
and R. Rahim (2009). Proceeding of AEROTECH III – 2009.
8 / 2
Department of Aerospace Engineering UPM, ISBN 978-983-
42130-2-2, Malaysia.
Chapter in book
Proceedings 1. Abas Abd. Wahab; Azmin Shakrine Mohd Rafie (1999).
Wind Turbine Blades for Harnessing Enegy from Malaysian
Low Speed Wind – Manufacturing Technique. World
Renewable Energy Congress Malaysia, WREC’99.
2. A. S. M. Rafie, A. H. Attaran, D. L. Majid, , S. Basri (2006).
Design and Development of an Experimental Aeroelastic
Test Rig. RiVET 2006 Conference. Kuala Lumpur,
Malaysia.
3. A. S. M. Rafie, S. Basri, A. H. Attaran, D. L. Majid, N.
Yidris, M. T. Hameed Sultan (2007). Experimental Analysis
for Eagle 150B Aicraft Wing. AEROTECH II-2007
Conference. Kuala Lumpur, Malaysia.
4. A. S. M. Rafie, S. Basri, A. H. Attaran, D. L. Majid, M. T.
Hameed Sultan, N. Yidris (2007). Computational Analysis
for Eagle 150B Aicraft Wing. AEROTECH II-2007
Conference. Kuala Lumpur, Malaysia.
5. M. T. Hameed Sultan, S. Basri, R. Zahari, M. R. Ajir, N.
Yidris, A. S. M. Rafie (2007). Design and Development of
Ballistic Impact Test Facility. AEROTECH II-2007
Conference. Kuala Lumpur, Malaysia.
6. Affandi N. B., Rafie A. S. M., Basri S. (2009). Experimental
Testing of Coconut-Shell Powder Composite as an Impact-
Worthy Constituent in Advanced Aerospace Material – A
Preliminary Study. AEROTECH III–2009 Conference.
Kuala Lumpur, Malaysia.
7. Kusumohadi C. S., Basri S., Ajir M. R., Jaafar A. A., Rafie
A. S. M. (2009). Conceptual Aerodynamics Design of Wau
Bulan UAV. AEROTECH III–2009 Conference. Kuala
Lumpur, Malaysia.
8. Yidris N., Loughlan J., Rafie A. S. M., Sultan M. T. H.
(2009). The Influence of Post-Local Buckling Mechanics on
the Stress Variations, Axial Stiffness and Ultimate Failure
Strength of Uniformly Compressed Thin-Walled Channel
Section Struts. AEROTECH III–2009 Conference. Kuala
Lumpur, Malaysia.
9. A.A. Ramadhan, A.R. Abu Talib, A.S. Mohd Rafie, R.
Zahari. (2010). Analytical Study of Energy Absorption on
9 / 2
Composite Kevlar-129/Polyester Under High Velocity
Impact. Conference on Aerospace and Mechanical
Engineering. pp 342-347. Kucing, Sarawak, Malaysia.
10. M.F. Abdul Hamid, A.R. Talib and A.S. Mohd Rafie.
(2008). Preliminary Velocity Measurement from a Gun
Tunnel using a High Speed Camera. FEIIC Symposium on
Engineering and Technology, Kuching, Sarawak, Malaysia.
11. Mohamed P. Hassan, Mohd Rafie A.S. and Fairuz I. Romli.
(2012). Modern Design Trend of Metal Aircraft Fuselage
Structure. International Science Postgraduate Conference
2012 (ISPC 2012), UTM, Skudai, Johor, Malaysia.
Other publications
Computer software
H. PROJEK PENYELIDIKAN TERDAHULU(Past Research Project) Project No. Project Title Role Year Source of fund Status
ERGS/1-2012/5527131 An Alternative
Concept using
Magnus Effect for
Low Speed Wind
Harvesting
Project
Leader
2012-
2014
ERGS On Going
RUGS 91310 Hypervelocity
Planar Plate
Impact
Experiments
of Woven
Carbon-fiber
Reinforced
Matrix
Composite
Panels and/or
Composite
Laminates
Project
leader
2007-
2010
RUGS Completed
04-01-24-SF1243 Realization
and
Verification
of Fighter
Aircraft-
Weapon
Compatibility
Certification
Database and
Simulator for
Weapon
Clearance
System
Member 2012-
2014
ScienceFund On Going
ERGS/1/11/TK/UPM/02/12 An Member 2011- ERGS On Going
10 /
2
Alternative
Function-
Based
Strategy for
Complex
Product
Design
Architecture
Development
2013
05-01-09-0725RU Development
of an
Experimental
Technique to
Determine
the Stiffness
Properties of
Anisotropic
Wing for
Aeroelastic
Analysis
Member 2009-
2011
RUGS Completed
05-04-10-1004RU Development
of
Engineering
Change
Selection
Methodology
for Aircraft
Redesign
Process
Member 2010-
2011
RUGS Completed