visi - feng.unimas.my · visi untuk menjadi sebuah universiti contoh serta diiktiraf di peringkat...

Visi Untuk menjadi sebuah universiti contoh serta diiktiraf di peringkat antarabangsa dan sebagai institusi pengajian tinggi yang menjadi pilihan utama golongan pelajar dan akademik melalui pencapaian cemerlang dalam pengajaran, penyelidikan dan kesarjanaan.

VisionTo become an exemplary university of internationally acknowledged stature and a scholarly institution of choice for both students and academics through the pursuit of excellence in teaching, research and scholarship

MisiUntuk menjana, menyebar dan menerap ilmu secara strategik dan inovatif bagi memperkasakan kualiti budaya bangsa dan kemakmuran masyarakatnya.

MissionTo generate, disseminate and apply knowledge strategically and innovatively to enhance the quality of the nation’s culture and prosperity of its people.

Fakulti Ekonomi dan Perniagaan

Fakulti Bahasa dan Komunikasi

Fakulti Perubatan dan Sains Kesihatan

Fakulti Sains Komputer dan Teknologi Maklumat

Fakulti Sains Kognitif dan Pembangunan Manusia

Fakulti Sains dan Teknologi Sumber

Fakulti Sains Sosial dan Kemanusiaan

Fakulti Seni Gunaan dan Kreatif

Fakulti Alam Bina

Fakulti Kejuruteraan

• Program Kejuruteraan Sivil,

• Program Kejuruteraan Mekanikal,

• Program Kejuruteraan Elektrikal dan Elektronik,

• Program Kejuruteraan Kimia.

Name:

Student ID:

Programme:

Address in Campus:

Permanent Address:

HP No:

E-mail:

In case of emergency, please contact:

Name:

Contact No:

Relationship with student:

Name:

Contact No:

E-mail:

Office Room:

Student ’S ProfIle

Academic Advisor Information:

Fakulti KejuruteraanBuku Panduan Pelajar Sesi 2019/20202

KANDUNGAN / Contents

MUKASURATPages

Kata Aluan / Foreword

Pegawai-pegawai Utama UNIMAS / The University Senior Management

Jawatankuasa Pengurusan Fakulti / Faculty Management Committee

Jawatankuasa Akademik Fakulti / Faculty Academic Committee

Pegawai Pengurusan dan Profesional / Administrative and Professional Officer

Misi Fakulti / Faculty Mission

Visi Fakulti / Faculty Vision

Objektif Fakulti / Faculty Objective

Sejarah Fakulti / Faculty History

Struktur Akademik / Academic Structure

Sistem Mentor-Mentee / Mentor-Mentee System

Latihan Industri / Industrial Training

Projek Tahun Akhir / Final Year Project

4

5

6

8

10

11

11

11

11

12

15

17

`18

Fakulti KejuruteraanBuku Panduan Pelajar Sesi 2019/2020 3

KANDUNGAN / Contents

MUKASURATPages

PROGRAM PENGAJIAN YANG DITAWARKAN / Programmes offered

Program Kejuruteraan Sivil/ 21Civil Engineering programme

Program Kejuruteraan Mekanikal / 33Mechanical Engineering Programme

Program Kejuruteraan Elektrikal dan Elektronik/ 43Elecrical and Electronic Engineering Programme

Program Kejuruteraan Kimia/ 53Chemical Engineering Programme

Kursus-Kursus Pengukuhan(R) /Remedial Courses (R) 61

Kursus-Kursus Pembangunan Generik (G) / Generic Courses (G)

Kursus Elektif Universiti / University Elective Courses 63

Senarai Kursus Remedial Dan Generik Bagi Pelajar Antarabangsa / Remedial Courses And generic courses For International Students 70

Senarai Staf Sokongan Pentadbiran & Sokongan Teknikal /Admistration & Technical Supporting Staff 71

Kalendar Akademik Sarjana Muda/Academic Calendar For Undergradute Studies 77


Kata Aluan / foreword

Prof Madya Ir. Dr Hjh Siti Noor Linda Hj TaibDekan / dean

Fakulti Kejuruteraan / Faculty of EngineeringUniversiti Malaysia Sarawak

Assalamualaikum Warahmatullahi Wabarakatuh dan Salam Sejahtera

Sekalung TAHNIAH diucapkan kepada mahasiswa dan mahasiswi yang telah terpilih untuk mengikuti program yang ditawarkan di Fakulti Kejuruteraan pada Sesi Akademi 2019/2020 dan kedatangan anda ke Fakulti Kejuruteraan adalah amat dialu-alukan.

Fakulti Kejuruteraan menawarkan empat (4) program setakat ini iaitu Program Kejuruteraan Sivil, Program Kejuruteraan Mekanikal, Program Kejuruteraan Elektrikal dan Elektronik, Program Kejuruteraan Kimia. Semua program kejuruteraan yang ditawarkan mendapat pengiktirafan daripada Lembaga Jurutera Malaysia. Program-program tersebut telah melahirkan ramai graduan yang telah berjaya dalam bidang masing-masing semenjak penubuhan Fakulti Kejuruteraan pada tahun 1993.

Fakulti Kejuruteraan turut menawarkan program Sarjana secara Kerja Kursus iaitu Program Sarjana Kejuruteraan Sivil, Sarjana Kejuruteraan Sistem Komunikasi dan Sarjana Kejuruteraan Mekanikal sementara program-program lain peringkat siswazah yang ditawarkan oleh Fakulti Kejuruteraan adalah program Sarjana dan PhD secara penyelidikan. Tujuan program- program tersebut ditawarkan adalah untuk melahirkan graduan-graduan yang berkebolehan menghadapi cabaran dalam memacu pembangunan pada masa hadapan serta berkebolehan menggunakan teknologi terkini dalam usaha membangunkan negara.

Banyak aktiviti (akademik atau bukan akademik) telah dijalankan dalam usaha mempertingkatkan kualiti pengajaran dan pembelajaran. Fakulti Kejuruteraan amat aktif dalam menggunakan salah satu daripada kaedah pembelajaran iaitu kaedah OBE (Outcome Based Education) bagi memastikan keberkesanan setiap program yang ditawarkan. Kaedah pembelajaran yang ditawarkan juga memberi pendedahan khas kepada pelajar-pelajar untuk berkongsi pengalaman serta memberi kesedaran mengenai persediaan-persediaan yang mereka harus ada sebelum memasuki alam pekerjaan yang lebih mencabar.

Pihak fakulti akan sentiasa memberi kerjasama serta dorongan di sepanjang pengajian anda di UNIMAS.

Selamat Maju Jaya Demi Masa Depan yang Cemerlang! Yakin Boleh!

Prof Madya Ir. Dr Hjh Siti Noor Linda Hj Taib


PEGAWAI-PEGAWAI UTAMA UNIVERSITIthe university senior management

Naib Canselorvice-Chancellor

Prof Datuk Dr Mohamad Kadim Bin Suaidi

Timbalan Naib Canselor (Akademik & Antarabangsa)

deputy vice-Chancellor (academic & international)Prof Dr Ahmad Hata Rasit

Timbalan Naib Canselor(Penyelidikan & Inovasi)deputy vice-Chancellor (research & innovation)

Prof Dr Wan HashimWan Ibrahim

Timbalan Naib Canselor(Hal Ehwal Pelajar & Alumni)

deputy vice-Chancellor (student affairs & alumni)

Prof Dato Mohd Fadzil Abd Rahman

Pendaftarregistrar

Encik Henry TeningAk Sengeng

PengarahPusat Khidmat Maklumat

Akademikdirector

Centre of academic information servicesPuan Korina Ibrahim

Bendahari Bursar

Tuan Haji Mazlan Kiflie


JAWATANKUASA PENGURUSAN FAKULTIfaCulty management Committee

Dekan / deanProf Madya Ir. Dr Hjh Siti Noor Linda Hj Taib

Timbalan Dekan (Prasiswazah) deputy dean (undergraduate)Prof Madya Dr Abdullah Hj Yassin

Timbalan Dekan(Penyelidikan & Siswazah)deputy dean(research and graduate)Dr Norhuzaimin Julai

Timbalan Dekan (Hal Ehwal Pelajar dan Alumi)deputy dean (student affairs and alumni)Dr Nazeri Abdul Rahman

Timbalan Dekan(Keterlibatan Industri, Komuniti dan Pengkomersilan) deputy dean(industry and Community engagement and Commercialization)Prof Madya Ir. Dr Lim Soh Fong

Ketua Jabatan(Kejuruteraan Sivil)head of department(Civil engineering)Prof Madya Dr Mohammad Ibrahim Safawi Mohd Zain

Ketua Jabatan (Kejuruteraan Kimia & Sustainabiliti Tenaga)head of department(Chemical engineering and energy sustainability)Prof Madya Dr Rubiyah Baini


Ketua Jabatan (Kejuruteraan Mekanikal) head of department(mechanical engineering)Dr Noor Hisyam Noor Mohamed

Penolong Pendaftar Kanansenior assistant registrarPuan Rozita Nawi

Penolong Pendaftarassistant registrarCik Rosmanti Kiflie

Ketua Jabatan (Kejuruteraan Elektrikal & Elektronik)head of department (electrical & electronics engineering)Dr Shafrida Sahrani


JAWATANKUASA AKADEMIK FAKULTIfaCulty aCademiC Committee

Ketua Jabatan / head of department

Dekan / deanProf Madya Ir. Dr Hjh Siti Noor Linda Hj Taib

Timbalan Dekan (Prasiswazah) deputy dean (undergraduate)Prof Madya Dr Abdullah Hj Yassin

Timbalan Dekan(Penyelidikan & Siswazah)deputy dean(research and graduate)Dr Norhuzaimin Julai

Timbalan Dekan (Hal Ehwal Pelajar dan Alumi)deputy dean (student affairs and alumni)Dr Nazeri Abdul Rahman

Timbalan Dekan(Keterlibatan Industri, Komuniti dan Pengkomersilan) deputy dean(industry and Community engagement and Commercialization)Prof Madya Ir. Dr Lim Soh Fong

Ketua Jabatan(Kejuruteraan Sivil)head of department(Civil engineering)Prof Madya Dr Mohammad Ibrahim Safawi Mohd Zain

Ketua Jabatan (Kejuruteraan Mekanikal) head of department(mechanical engineering)Dr Noor Hisyam Noor Mohamed

Ketua Jabatan (Kejuruteraan Kimia & Sustainabiliti Tenaga)head of department(Chemical engineering and energy sustainability)Prof Madya Dr Rubiyah Baini

Ketua Jabatan (Kejuruteraan Elektrikal & Elektronik)head of department (electrical & electronics engineering)Dr Shafrida Sahrani


Penyelaras Program / Programme Coordinators

Pascasiswazah / Postgraduate

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Komputer) Bachelor of engineering (hons) in electronics (Computer)Dr Siti Kudnie Sahari

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Telekomunikasi) Bachelor of engineering (hons) in electronics (telecommunications)Dr Kho Lee Chin

Sarjana Kejuruteraan (Kimia)master of engineering (Chemical)Dr Ibrahim Yakub

Sarjana Kejuruteraan (Sistem Komunikasi)master of engineering (Communication systems)Prof Madya Ir. Dr Kismet Anak Hong Ping

Sarjana Muda Kejuruteraan (Kepujian) Kejuruteraan Elektrikal dan ElektronikBachelor of engineering (hons) electrical and electronics engineering Encik Mohd RidhuanMohd Sharip

Prasiswazah / undergraduate

Sarjana Kejuruteraan (Sivil)master of engineering (Civil)Dr Raudhah Ahmadi

Sarjana Muda Kejuruteraan Mekanikal Dengan KepujianBachelor of mechanical engineering with honoursDr Annisa Jamali

Sarjana Kejuruteraan (Mekanikal)master of engineering (mechanical) Dr Marini Sawawi

Sarjana Muda Kejuruteraan Sivil dengan KepujianBachelor of Civil engineering with honours Dr Jethro Henry Adam

Sarjana Muda Kejuruteraan Dengan Kepujian (Kejuruteraan Kimia)Bachelor of engineering with honours (Chemical engineering)Dr Josephine Lai Chang Hui


PEGAWAI PENGURUSAN DAN PROFESIONALadministrative and Professional offiCer

Penolong Pendaftar Kanansenior assistant registrar

Puan Rozita [email protected]

samb/ext : 3955

Pegawai Sains KananSenior Science Officer

Encik Raja Mohd Raffel Bin [email protected]

samb/ext : 3456

Pegawai Sains KananSenior Science Officer

Cik Norzilawatil Azwa [email protected]

samb/ext : 3458

Penolong Pendaftar assistant registrar

Cik Rosmanti Binti [email protected]

samb/ext : 3334


Misi Fakulti / faculty missionMenyediakan budaya penambahbaikan berterusan melalui kurikulum yang holistik dan kajian strategik yang melibatkan penyertaan pihak berkepentingan yang diserahkan oleh ahli-ahli ilmiah Fakulti yang menyumbang ke arah penjanaan pengetahuan.

To provide a culture of continuous improvement and holistic curriculum involving stakeholders’ participation that is delivered by scholarly faculty members who contributes towards knowledge creation.

Visi Fakulti / faculty visionMenjadi Fakulti terkemuka dengan program akreditasi yang melahirkan graduan yang berkualiti, dan memanfaatkan masyarakat dan negara melalui penyelidikan berimpak tinggi dan teladan kepimpinan.

To be a leading faculty with accredited programmes producing quality graduates and benefiting the community and nation through high impact research and exemplary leadership.

Objektif Fakulti / faculty objectiveMenjamin segala kegiatannya bersesuaian dengan perkembangan dan kemajuan teknologi baru dan akan datang, relevan dengan pembangunan negara dan seiring dengan usaha meningkatkan taraf keikhtisasan bidangnya. Semua ini terlaksana melalui penawaran pelbagai peluang dalam pendidikan kejuruteraan, latihan dan khidmat kesarjanaan serta melalui penerapan ilmu secara strategik dan inovatif bagi meningkatkan kualiti budaya bangsa dan kemakmuran masyarakatnya. To ensure all activities are appropriate to the development and advancement of new technologies and the future, relevant to the development of the country and in line with efforts to improve professionalism. All this is done by offering various opportunities in engineering education, training and services through the application of scholarship and knowledge in strategic and innovative ways to improve the quality of the nation’s culture and prosperity of its citizens.

Sejarah Fakulti / faculty historyFakulti Kejuruteraan merupakan salah sebuah fakulti daripada lapan buah fakulti yang wujud di UNIMAS. Ia ditubuhkan pada 30 Disember 1993. Seawal penubuhan, Fakulti Kejuruteraan telah menawarkan dua buah program pengajian iaitu Kejuruteraan Sivil dan Kejuruteraan Elektronik dan Telekomunikasi dengan pengambilan pertamanya pada sesi akademik Julai 1994. Pada tahun 1996, program Kejuruteraan Mekanikal dan Pembuatan telah ditawarkan dan disusuli dengan penawaran program Kejuruteraan Elektronik dan Komputer pada Mei 2000 bagi memenuhi keperluan serta pembangunan dalam bidang kejuruteraan. Program Kejuruteraan Kimia mula ditawarkan pada sesi akademik 2009 dan terkini Fakulti Kejuruteraan dengan bangganya telah menubuhkan satu lagi program baharu iaitu Program Kejuruteraan Elektrikal dan Elektronik bagi melahirkan lebih banyak graduan yang akan menjadi pemangkin dan penyumbang kepada sektor ekonomi.

Faculty of Engineering is one of the eight faculties in UNIMAS. It was established on 30 December 1993. On its establishment, Faculty of Engineering offered two undergraduate programmes, which are Civil Engineering and Electronics and Telecommunication and received its first admission in July 1994 academic session. In 1996, the Mechanical and Manufacturing Engineering programme was introduced, followed by offering of Electronics and Computer programme starting May 2000 to fulfill the demand and development in the engineering fields. Chemical Engineering programme was offered in 2009 academic session and now the Faculty of Engineering has proudly introduce the Electrical and Electronics Engineering programme to produce more qualified graduates who will be the catalyst and contributor to the advancement of Engineering profession and the economic sector.


STRUKTUR AKADEMIK / aCademiC struCture

Struktur Program / Programme structure

Setiap program pengajian di UNIMAS telah direkabentuk menurut kurikulum yang berasaskan kepada pembangunan individu secara total sebagai warga yang berautonomi tetapi saling bekerjasama dalam masyarakat. Struktur program pengajian mengandungi kursus-kursus menurut kategori berikut:

Each program at UNIMAS has been designed in accordance with the curriculum that is based on individual development as an autonomous citizen but working together in the community. The structure of the program consists of courses in the following categories:

Kursus Teras / Core Course

Kursus-kursus yang memberikan pengetahuan dan kemahiran ke arah pengkhususan dalam sesuatu bidang atau lapangan yang dituntut bagi sesuatu Program. (Setiap Program bukan sahaja tertumpu kepada teori dan amalan pengkhususannya, tetapi penekanan diberi kepada aspek teknologi dan pengurusan) [112+ kredit]

The courses provide knowledge and skills specializes in a particular field required for a program. (Each program not only focuses on the theory and practice of specialization, but the focus is on technology and management) [112+ credit]

Mata pelajaran Umum / general education subjectsMata Pelajaran Umum adalah kursus wajib universiti yang perlu diambil bagi tujuan pengijazahan. Kursus-kursus dibawah kategori MPU dilihat mampu untuk melahirkan graduan yang holistic, menghayati nilai-nilai patriotism dan jati diri beracuan Malaysia serta menguasai kemahiran insaniah ke arah memenuhi kebolehpasaran kerja. Kod kursus dibawah kategori ini bermula dengan MPU.

General Education Subjects are compulsory university courses which is the pre-requisite for the undergraduate award. Courses under the category of MPU are seen to be able to produce holistic graduates, appreciate the values of patriotism and Malaysian-born identity and mastering soft skills towards fulfilling job-oriented skills. The course code under this category starts with MPU.

Kursus Elektif Universiti / university elective Courses

Kursus-kursus pilihan antara Fakulti yang memberi peluang kepada pelajar untuk mendalami satu bidang lain selain daripada jurusan pengkhususannya, hingga ke tahap yang bererti dan memuaskan. [9 kredit]

Courses from other faculties that provide opportunities for students to explore another area of study beside its own specialization, to the extent that is meaningful and satisfying. [9 credits]

Sistem Semester dan Kursus Bermodul / semester system and modular courses

Struktur pengajian di UNIMAS diasaskan kepada semester dengan kursus bermodul. Setiap tahun pengajian dibahagikan kepada dua semester:

Semester 1 14 mingguSemester 2 14 minggu


Structural studies at UNIMAS based on semesters with modular courses. Each academic year is divided into two semesters:Semester 1 14 WeeksSemester 2 14 Weeks

Kursus di UNIMAS berbentuk modul, dan setiap modul mempunyai unit-unit pembelajaran tertentu. Setiap modul kursus mempunyai nilai kredit. Sebagai panduan, satu kredit memerlukan pelajar menumpukan kira-kira 3 jam pembelajaran seminggu bagi kursus berkenaan. Masa tersebut digunakan untuk aktiviti formal seperti kuliah, tutorial, amali dan/atau ujian, serta aktiviti kendalian sendiri seperti membaca, berbincang dan menyiapkan tugasan yang diperlukan oleh kursus tersebut.

Courses offered in UNIMAS is in module system, and each module has specific learning units. Each module has a credit value of the course. As a guide, a credit requires students to devote about 3 hours of learning per week for the course. Time is used for informal activities such as lectures, tutorials, lab and / or test, as well as its own operating activities, such as reading, discussing, and complete assignments required by the course.

Pendaftaran Kursus / Course registration

Pendaftaran bagi semua kursus perlu dilakukan pada masa dan tempoh yang ditentukan. Pelajar diwajibkan mendaftar pada tarikh dan tempoh masa yang akan diumumkan oleh Bahagian Pengajian Prasiswazah.

Registration for all courses must be done on time and within a specified period. Students are required to register within the time stipulated by the Undergraduate Studies Division.

Pindah Kredit / Credit transfer

Pindah Kredit hendaklah dipohon sebelum berakhir minggu kedua perkuliahan dan sebarang permohonan selepas tempoh yang telah ditetapkan tidak akan dipertimbangkan. Permohonan Pindah Kredit hendaklah dibuat dengan mengisi Borang BPPs-03 dan disahkan oleh Ketua Jabatan sebelum dihantar untuk mendapat kelulusan daripada Dekan Fakulti Kejuruteraan.

Credit Transfer need to be applied before the end of the second week of lectures and any application after the stated period will not be considered. The application of credit transfer shall be made by filling out the form BPPS-03 and certified by the Head of Department before being submitted for approval by the Dean of the Faculty of Engineering.

Tempoh Pengajian (4 Tahun) / duration of study (4 years)

Program yang ditawarkan oleh Fakulti Kejuruteraan mempunyai tempoh pengajian 4 tahun iaitu bersamaan dengan 8 semester.

Programs offered by the Faculty of Engineering has a duration of 4 years which is equivalent to 8 semesters.

Penilaian / evaluation

Prestasi dalam sesuatu kursus dinilai menurut beberapa kaedah, secara berterusan, termasuk penilaian kerja kursus, tugasan, ujian dan peperiksaan. Prestasi itu ditentukan menurut sistem Purata Nilai Gred (PNG), dan prestasi pelajar bagi setiap peringkat dan keseluruhan diberikan sebagai Purata Nilai Gred Kumulatif (PNGK).

Performance in a course shall be assessed continuously according to several methods, including


course work, assignments, tests and examinations. Performance is determined based on Grade Point Average (GPA), and the performance of students in each level and overall given as a Cumulative Grade Point Average (CGPA). Kehadiran Pelajar Ke Kuliah / student attendance to lectures

Fakulti Kejuruteraan menitikberatkan kehadiran pelajar ke kuliah/tutorial/amali. Pelajar yang mempunyai kehadiran kurang daripada 80% tidak akan dibenarkan mengambil peperiksaan semester kecuali pelajar mempunyai sebab yang munasabah atas ketidakhadiran dan tertakluk kepada keputusan Jawatankuasa Pengurusan Fakulti. (Berdasarkan perkara 4.4.1 kelulusan Senat Bil. 5/2008 ke 93 pada 5 Nov 2008)

Faculty of Engineering emphasizes student attendance to lectures / tutorials / practicals. Students who have less than 80% attendance will not be allowed to seat for final exams unless the student has a valid reason for the absences and subject to the decision of the Management Committee of the Faculty. (Based on 4.4.1 the approval of the Senate bill. 5/2008 to 93 in November 5, 2008)

Pre-requisiti / requisite / Co- requisite• A pre-requisite means a course or other requirement that a student must have taken and passed

prior to rolling in a specific course or program.• A requisite means a course or other requirement that a student must have taken prior to enrolling

in a specific course or program• A co-requisite means a course or other requirement that a student must take at the same time as

another course or requirement


SISTEM MENTOR- MENTEE / mentor-mentee system

UNIMAS sentiasa memberi keutamaan kepada kecemerlangan akademik serta pembangunan sahsiah setiap pelajar. Salah satu pendekatan yang boleh membantu untuk merealisasikan matlamat tersebut ialah dengan mewujudkan hubungan dua hala antara pelajar dan pengajar di setiap fakulti melalui sistem mentor - mentee. Melalui sistem ini, pelajar (mentee) diberi bimbingan dan nasihat oleh pensyarah (mentor) dalam pelbagai aspek terutamanya yang berkaitan dengan hal ehwal akademik. Sistem ini juga mengambil berat terhadap bimbingan lain yang diperlukan oleh pelajar untuk mengharungi cabaran bukan sahaja sebagai seorang pelajar tetapi juga sebagai seorang remaja yang menghadapi perubahan psikologi dan identiti. Mentor memainkan peranan yang penting sebagai Penasihat (Advisor) dan juga Contoh Teladan yang Baik (Positive Role Model) kepada mentee dalam pelbagai aspek. Keberkesanan sistem ini amatlah bergantung kepada komitmen serta kerjasama di antara kedua-dua pihak.

Melaluinya, pelajar dapat diberi bimbingan dan menerima nasihat dalam hal ehwal akademik serta dapat mengenalpasti masalah berkaitan yang boleh menimbulkan masalah akademik untuk dirujuk kepada pihak tertentu yang mempunyai kepakaran untuk menyelesaikan masalah yang dihadapi.

Seorang Penasihat Akademik/mentor boleh membantu pelajar merancang skema pengajian, membuat pemilihan kursus, memahami kurikulum, sistem semester, sistem pendaftaran, sistem peperiksaan dan pengecualian kursus.

Pelajar digalakkan berjumpa terus dengan Penasihat Akademik/mentor masing-masing untuk mendapatkan bimbingan dan nasihat dalam hal ehwal akademik dan masalah berkaitan. Temujanji boleh dilakukan dengan Penasihat Akademik mengikut kesesuaian masa yang telah ditetapkan.

UNIMAS always accentuates the important of academic excellent and personal development of each student. One of the techniques in achieving these aims is by establishing a mutual interrelationship between the student and lecturer in mentor-mentee system in which is already implemented in every faculty in this university. In this system, the student (mentee) is provided with guidance and advice in various aspects by a lecturer (mentor) especially those related to the academic. The system also imparts other guidance needed by the student in confronting the challenges not only as a student but also as a teenager coping with psychological and identity changes. Mentor not only performs an important role as advisor but also as Positive Role Models to the mentee in various aspects. The effectiveness of this system depends immensely on the commitment and cooperation of both mentor and mentee.

In which, in this system, the mentee’s academic affairs is guided and advised as well as identifying any problem that could lead to academic problems. Should there be any problem, the mentee will be referred to other relevant expert in order to unravel and solve the problems.

An academic mentor is able to help mentee of planning a study scheme, selecting courses, understand the curriculum, semester system, registration, examination and course exemption.

The mentee is encouraged to meet their academic mentor personally for guidance and advices in academic affairs and other related problems in which an appointment should be made with the academic mentor prior to the meeting.


Tugas-tugas mentor adalah seperti berikut: Academic Mentor tasks are as follows:

• Membuat perjumpaan dengan mentee – sekurang-kurangnya 2-3 kali sebulan. Set appointments with mentee of at least 2 to 3 times a month.

• Memantau kemajuan akademik serta perkembangan semasa setiap mentee. Monitor academic progress and development for each mentee.

• Mendengar serta memberi bimbingan kepada mentee sekiranya bermasalah. Listen and provide guidance to mentee with problem.

• Menjaga perkara-perkara yang sulit mengenai mentee. Secure mentee confidential matters.

• Merujuk mentee kepada pakar-pakar yang sesuai berhubung penyelesaian masalah-masalah yang khusus. Refer mentee to appropriate experts for specific problem solving.

• Membantu mentee membuat keputusan dalam hal perancangan akademik dan kerjaya. Assist mentee to make decisions with regards to academic and career planning.

• Menjaga hubungan baik dengan mentee supaya sistem mentor-mentee ini dapat dilaksanakan dengan berkesan. Retain a good relationship with mentee for an effective implementation of mentor-mentee system.

• Menyerah slip keputusan peperiksaan kepada mentee pada setiap semester. Disseminate results slip to mentee for every semester.


LATIHAN INDUSTRI / industrial training

Pengenalan / introduction

Pelajar-pelajar yang mengikuti semua program Sarjana Muda Kejuruteraan (Kepujian) adalah diwajibkan menjalani Latihan Industri selama 10 minggu pada tempoh Antarsesi Tahun 3. Perlaksanaan Latihan Industri merangkumi praktikal di industri, penyediaan laporan dan pembentangan serta pemberian markah diadakan dalam satu semester.

Students are required to have a 10 weeks industrial training during their third year, third semester. The industrial training includes an attachment in industry, report preparation and an oral presentation.

Tujuan Latihan Industri / aims of industrial training

a) Mendedahkan pelajar kepada pengalaman dan pengetahuan kejuruteraan yang bersesuaian dan juga kegiatan-kegiatan penyelidikan yang tidak terdapat di bilik-bilik kuliah;

To expose students to real world engineering industrial experience in compliment with classroom activities;

b) Membandingkan dan mengamalkan apa yang dipelajari semasa kuliah dengan keadaan sebenar di luar kuliah;

To allow students to compare and practice knowledge acquired from classroom in real world situation;

c) Mengemukakan pengalaman-pengalaman yang diperolehi semasa Latihan Industri dalam perbincangan di bilik kuliah pada tahun pengajian seterusnya;

To allow students to share their experience from industrial at the next semester;

d) Menyesuaikan pelajar-pelajar dengan alam pekerjaan yang akan ditempuh selepas tamat pengajian;

To prepare students to real working experience after graduation;

e) Mendapat pengalaman dalam membuat laporan kerja-kerja kejuruteraan; To provide students with experience in preparing engineering report;

f) Mendedahkan pelajar kepada tanggungjawab jurutera dan etika kejuruteraan. To expose students to engineering ethic and the responsibility as an engineer;

g) Mendedahkan pelajar kepada bakal-bakal majikan supaya majikan juga dapat mengetahui dengan lebih mendalam program latihan di Universiti Malaysia Sarawak;

To expose students to future employers in such that the employers can have a better understanding of academic programs in Universiti Malaysia Sarawak;

Dengan pengalaman dan pengetahuan, diharap para graduan akan dapat memilih pekerjaan yang bersesuaian dengan minat mereka apabila tamat pengajian kelak.

With the acquired knowledge and experience, graduates could chose a suitable career path after graduation.


PROJEK TAHUN AKHIR / final year ProJeCt

Pengenalan / introduction

Pelajar-pelajar yang mengikuti semua program Sarjana Muda Kejuruteraan (Kepujian) adalah diwajibkan untuk menyiapkan Projek Tahun Akhir sebelum bergraduat. Projek Tahun Akhir akan dibahagikan kepada dua bahagian iaitu Projek Tahun Akhir 1 dan Projek Tahun Akhir 2. Projek Tahun Akhir 1 akan diambil pada Semester 1 Tahun 4 manakala Projek Tahun Akhir 2 akan diambil pada Semester 2 Tahun 4.

Final Year Project is among the compulsory subjects for students to complete a Bachelor Degree in Engineering (Hons), UNIMAS. The Final Year Project is divided into two sections which will be carried out in Semester 1 known as FYP 1 and Semester 2 known as FYP 2, in Year 4 respectively.

Hasil Pembelajaran / learning outcomes

Hasil pembelajaran Projek Tahun Akhir adalah untuk membuktikan The learning outcomes of the Final Year Project will resemble:-

• Keupayaan menunjukkan kebolehan memulakan penyelidikan atau projek reka bentuk.

The ability of students to start a research or design project.

• Keupayaan mengenalpasti bahan rujukan yang berkaitan dengan projek dan mempersembahkannya secara logik dan bersepadu.

The ability of students to identify reference materials that is related to their projects and eventually present these sources in logical and comprehensive manner.

• Keupayaan membangunkan sistem, komponen atau proses untuk menyelesaikan, meningkatkan dan menambahbaik masalah teknikal.

The ability of students to develop a system, component or process that could solve and improve any technical problem.

• Keupayaan menganalisa dan menginterprestasi data dan menjadikan keputusan kepada kesimpulan yang menyeluruh.

The ability of students to analyze and interpret data that could produce results that leads to an acceptable conclusion.

• Keupayaan mengaitkan data yang diinterprestasi dengan bahan rujukan. The ability of students to correlate the interpreted data with any existing reference

sources.

• Keupayaan untuk menunjukkan tanggungjawab profesional dan beretika. The ability of students to reflect professional and ethical responsibility.

• Keupayaan untuk mempersembahkan dan menyatakan penemuan projek. The ability of students to make oral presentation and deliver the findings of the Final

Year Project.


PERSATUAN PELAJAR FAKULTI KEJURUTERAAN (SAFE) /student assoCiation of faCulty engineering (safe)

Persatuan Pelajar Fakulti Kejuruteraan (SAFE) telah didaftarkan di Bahagian Hal Ehwal Pelajar & Alumni (BHEP&A) UNIMAS dan telah diiktiraf sebagai penerima Anugerah Persatuan Fakulti Terbaik pada Malam Anugerah Pelajar 2007 di bawah kelolaan Dr Abd Razak Abd Karim. Persatuan ini telah bergiat aktif dalam aktiviti dalaman mahupun aktiviti luaran yang telah dianjurkan oleh BHEP&A, UNIMAS. Seterusnya pada tahun 2010, SAFE sekali lagi menerima Anugerah Persatuan Fakulti Terbaik pada Malam Anugerah Pelajar 2010 bawah kelolaan Puan Kasumawati Binti Lias, Encik Aidil Azli Bin Alias dan Encik Ron Aldrino Chan sebagai penasihat SAFE. Selain itu, SAFE turut menyumbang kepada kejuaraan Fakulti Kejuruteraan dalam Kejohanan Sukan UNIMAS (KESUMAS) pada tahun 2009, 2010, 2011, 2012, 2013 dan 2015.

Peringkat awal penubuhan bermula atas inisiatif Prof Madya Dr Awangku Abd Rahman bin Pgn Hj Yusof sebagai Penasihat Pemajuan Pelajar bagi pihak Dekan Fakulti Kejuruteraan dan dikelolai oleh Penasihat Persatuan iaitu Prof Madya Dr Azhaili Baharun. Keahlian persatuan dibuka kepada semua pelajar yang berdaftar di Fakulti Kejuruteraan secara automatik. Ahli-ahli persatuan haruslah bersedia memberi sumbangan dalam segala aspek bagi memastikan objektif persatuan tercapai lebih-lebih lagi bagi mereka yang telah terpilih dan dilantik memegang jawatan-jawatan eksekutif dalam persatuan.

Pada tahun 2010, SAFE dengan kerjasama IEM G & S Sarawak Branch yang dipengerusikan oleh Encik Ron Aldrino Chan telah bersama menubuhkan IEM-SAFE UNIMAS Student Section. Penasihat pertama IEM-SAFE UNIMAS Student Section adalah Puan Kasumawati Binti Lias dan Encik Aidil Azli Bin Alias. Penasihat sekarang adalah Puan Dyg Nur Salmi Dharmiza Binti Awg Salleh. Manakala, IEM Student UNIMAS Chapter berada di bawah kelolaan En Mohd Azrin bin Mohd Said. Pelbagai aktiviti tahunan telah dan akan dijalankan oleh SAFE dan IEM-SAFE UNIMAS Student Section seperti Hari Aluan Fakulti bersama pelajar-pelajar baharu, Program Minggu Hijau, Program Minggu Kejuruteraan, Piala Dekan Fakulti Kejuruteraan, Program Motivasi bersama pelajar- pelajar Sekolah Rendah dan Menengah serta lawatan ke industri.

Student Association of Faculty Engineering (SAFE) had been registered in the Student Affairs Division & Alumni (BHEPA) UNIMAS and was awarded as The Best Faculty 2007 at Student Award Ceremony 2007 under the supervision of Mr. Abd Razak Abd Karim. The association has participated actively in inter-university or intra-university activities organised by BHEPA, UNIMAS. In year 2010, SAFE once again was awarded as The Best Faculty at Student Award Ceremony 2010 under the supervision of three advisors Mdm Kasumawati Binti Lias, Mr Aidil Azli Bin Alias and Mr Ron Aldrino Chan. Besides, SAFE also contributes to the faculty in becoming the champion for KESUMAS in year 2009, 2010, 2011, 2012, 2013, and 2015.

The association was established and initiated by Prof Madya Dr Awangku Abd Rahman bin Pgn Hj Yusof who was the advisor of the students’ development on behalf of the Dean of the Faculty of Engineering, Prof Madya Dr Azhaili Baharun. Memberships for the association is automatically open to all students registered under the Faculty of Engineering. The members of the association especially for those who were selected and appointed for executive positions in the association must be willing to contribute in all aspects to ensure that the objectives of the association can be achieved.


In 2010, with the help of IEM G&S Sarawak Branch which was chaired by Mr. Ron Aldrino Chan, SAFE has succesfully established the IEM-SAFE UNIMAS Student Section. The first advisor for IEM-SAFE UNIMAS Student Section were Mdm Kasumawati Binti Lias and Mr Aidil Azli Bin Alias. The current advisor is Mdm Dyg Nur Dharmiza Binti Awg Salleh Salmi. Meanwhile, IEM Student UNIMAS Chapter is under the supervision of Mr Mohd Azrin bin Mohd Said. Various activities had been carried out annually by SAFE and IEM-SAFE UNIMAS Student Section such as Faculty Orientation Day, Green Week, Engineering Week, FENG Dean Cup, Motivational programs with primary and secondary school students and also industrial/technical visits.

Objektif Penubuhan Persatuan Pelajar Fakulti Kejuruteraan (SAFE) /objectives of safe:-

1 Untuk melatih dan menonjolkan bakat kepimpinan. To train and accentuate leadership skills.

2 Mengeratkan hubungan di antara pensyarah dan pelajar. To strengthen the bond between students and lecturers.

3 Mendedahkan para pelajar terhadap maklumat yang relevan dalam bidang kejuruteraan daripada program masing-masing di samping meningkatkan mutu akademik pembelajaran yang berkualiti.

To expose students from every department to relevant information in engineering and enhance academic quality.

4 Memberi peluang kepada siswa dan siswi dari Fakulti Kejuruteraan mengambil bahagian secara aktif melalui aktiviti yang disediakan.

Provide opportunities for students from engineering department to actively take part in various activities.

5 Memohon dan menerima derma dan bantuan kewangan serta lain-lain sumbangan bagi mencapai tujuan dan matlamat persatuan.

Provide a platform for the association to apply and receive financial supports and other contributions in order to achieve the objectives and visions of the association.

6 Menegakkan hak-hak sebagai pelajar khususnya di dalam Fakulti Kejuruteraan selagi tidak bertentangan dengan etika Perlembagaan Universiti atau UNDANG-UNDANG MALAYSIA Akta 30-Akta Universiti Dan Kolej Universiti, 1971 bagi kepentingan serta kebaikan pelajar amnya.

Upholding the rights of the students in the Faculty of Engineering without opposing the ethics of university or UNDANG-UNDANG MALAYSIA Akta 30-Akta Universiti Dan Kolej Universiti, 1971 for the importance and benefits of the students.


PROGRAM PENGAJIAN YANG DITAWARKAN Programmes offered

JABATAN KEJURUTERAAN SIVIL / dePartment of Civil engineeringStaf Akademik / academic staff

Ketua Jabatan / head of departmentProf Madya Dr Mohammad Ibrahim Safawi Mohd Zain

[email protected]/ext : 3337

Prof Ir. Dr Law Puong Ling [email protected] samb/ext : 3276

Prof Dr Wan Hashim Wan [email protected]/ext : 1222

Prof Dr Ng Chee Khoon [email protected]/ext : 3288

Prof Dr Mohammad Abdul [email protected] samb/ext : 3223

Prof Madya Ir. Dr Hjh Siti Noor Linda Hj Taib [email protected]/ext : 3325

Dr Idawati Ismail [email protected] samb/ext : 1836

Ir. Dr Abdul Razak Abdul Karim [email protected]/ext : 3320

Ir. Dr Norazzlina M.Sa’don [email protected]/ext : 3320

Ir. Dr Leonard Lim Lik Pueh [email protected] samb/ext : 2624

Dr Mohamad Raduan Kabit [email protected]/ext : 2664

Sarjana Muda Kejuruteraan Sivil dengan KepujianBachelor of Civil engineering with honours Dr Jethro Henry [email protected]/ext : 3224

Sarjana Kejuruteraan (Sivil) master of engineering (Civil)Dr Raudhah [email protected]/ext : 4535


Pensyarah / lecturers


Sangkutan Industri / Industrial Attachment

Ir. Dr Ting Sim Nee [email protected] samb/ext : 3293

Encik Ahmad Kamal Abdul [email protected]/ext : 3284

Dr Alsidqi Hasan [email protected]/ext : 3231

Puan Azida Rashidi [email protected]/ext : 3308

Dr Charles Bong Hin Joo [email protected] samb/ext : 2290

Encik Abd Azim Abdullah [email protected]/ext : 2681

Ir. Dr Darrien Mah Yau Seng [email protected]/ext : 1039

Cik Hasmida Hamza [email protected]/ext : 4534

Dr Gaddafi Ismaili [email protected] samb/ext : 2693

Encik Larry Silas Tirau [email protected]/ext : 3423

Dr Lee Yee Yong [email protected]/ext : 3316

Puan Norazlina Bateni [email protected]/ext : 2654

Dr May Raksmey [email protected]/ext : 2605

Encik Ron Aldrino Chan @ Ron Buking [email protected]/ext : 3423

Dr Norsuzailina Mohamed Sutan [email protected]/ext : 3232

Puan Dygku Salma Awg [email protected]/ext : 3280

Dr Onni Suhaiza Selaman [email protected]/ext : 3281

Prof Madya Dr Ahmad Kueh Beng Hong [email protected]/ext : -

Dr Zamri Bujang [email protected]/ext : 3267

Dr Fauzan [email protected]/ext :


Puan Rohaida Affandi [email protected] samb/ext : -

Puan Nor Azalina Rosli [email protected] samb/ext : -

Puan Rosmina Ahmad Bustami [email protected]/ext : -

Cuti Belajar / Study Leave


1.0 Penubuhan Program / Programme establishment

Pengetahuan dalam kejuruteraan sivil adalah penting untuk melahirkan insan yang kompeten dan berilmu bagi kerja-kerja perancangan, rekabentuk, pembinaan serta pengendalian operasi struktur bangunan, jambatan, pelabuhan, empangan, stesen janakuasa, lebuhraya, landasan keretapi, lapangan terbang, sistem bekalan air, pembuangan sisa, pembentungan serta kawalan banjir dan hakisan. Objektif utama program Kejuruteraan Sivil adalah untuk memenuhi keperluan negara terhadap jurutera-jurutera yang mempunyai pendidikan, latihan dan pengkhususan yang bersepadu dalam bidang kejuruteraan awam yang bertambah sejajar dengan pertumbuhan ekonomi dan proses perindustrian yang pesat sekarang. Ia juga bertujuan melahirkan jurutera yang cekap, bertanggungjawab dan berpandangan jauh serta mempamerkan khidmat profesional yang bermutu tinggi.

Knowledge in Civil Engineering is important in developing highly competent and technically sound engineers in planning, design, construction and operation of building structures, bridges, wharves, dams, power stations, highways, railways, airports, water distribution system, solid waste, wastewater, and flood mitigation and erosion. The main objective of Civil Engineering programme is to meet the nation’s aspiration of having educated, trained and specialized engineers capable of integrating various Civil Engineering fields aligned with the current rapid economic and industrial development growth. The programme is also aimed at generating highly competent, responsible, forward looking and professionalism in the engineering field.

2.0 Matlamat Program / Programme objectives

Matlamat program ini adalah untuk menyediakan bakal jurutera-jurutera yang berkebolehan, cekap dan berkaliber berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

The programme aims to cultivate future engineers who of high caliber based on the following Programme Objectives (PEO):

Peo1 Practice professionalism, ethics and responsibility of Civil Engineering profession.

Peo2Broaden knowledge, skills and abilities through lifelong learning and continuously improve competency, to be abreast with technology advancement.

Peo3Engage with government and industry, domestically or globally to contribute to the engineering community and beyond.


3.0 Hasil Pembelajaran Program / Programme Learning OutcomesSetelah pelajar-pelajar bergraduat dari program ini, mereka berkeupayaan menguasai kebolehan-kebolehan berikut:Upon graduation, students of the programme are equipped with the following attributes:

PLO1 Apply knowledge of mathematics, natural science, engineering fundamentals and an engineering specialization to the solution of complex Civil Engineering problems.

PLO2 Identify, formulate, conduct research literature and analyze complex Civil Engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.

PLO3 Design solutions for complex Civil Engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal, and environmental considerations.

PLO4 Conduct investigation into complex Civil Engineering problems using research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions.

PLO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, including prediction and modelling, to complex Civil Engineering problems, with an understanding of the limitations.

PLO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional Civil Engineering practice.

PLO7 Understand and evaluate the sustainability and impact of professional Civil Engineering work in the solutions of complex Civil Engineering problems in societal and environmental contexts.

PLO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Civil Engineering practice.

PLO9 Communicate effectively on Civil Engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PLO10 Function effectively as an individual, and as a member or leader in diverse teams and in multidisciplinary settings.

PLO11 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PLO12 Demonstrate knowledge and understanding of Civil Engineering and management principles and economic decision making and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments and cultivate entrepreneurship skills.


4.0 Konsep Penubuhan Program / Concepts ProgrammeProgram ini menawarkan modul pengkhususan dalam bidang kejuruteraan sivil berikut:The programme offers civil engineering modules in the following fields:

(i) Kejuruteraan Geoteknik / geotechnical engineeringJurutera geoteknik bertanggungjawab untuk menentukan keadaan subpermukaan bumi yang merupakan asas/tapak kepada pembinaan struktur-struktur kejuruteraan seperti bangunan, tembok penahan, paip bawah tanah, terowong dan empangan. Rekabentuk struktur-struktur tersebut banyak bergantung kepada kekuatan dan sifat-sifat geologika lapisan tanah, serta pertimbangan faktor-faktor yang berkaitan dengan aspek keselamatan dan ekonomi.

Geotechnical engineers are responsible to identify the earth subsurface structures, in which are the foundations to construction of engineering structures such as buildings, retaining walls, underground pipelines, tunnels and dams. Designs of these structures depend largely on the strength and geologic properties of soil layers, as well as other factors related to safety and economy.

(ii) Kejuruteraan Pembinaan / Construction EngineeringJurutera pembinaan menyelia sesebuah projek kejuruteraan daripada peringkat perancangan sehingga penyiapan projek tersebut. Mereka bertanggungjawab agar projek tersebut dijalankan mengikut perancangan, dalam tempoh dan kos yang diberikan, serta menurut spesifikasi. Mereka merancang beban dan jadual kerja untuk memastikan projek tersebut berjalan lancar dan menjimatkan kos. Mereka kena sentiasa peka terhadap suasana projek yang sentiasa berubah supaya sumber bahan dan tenaga yang ada dapat digunakan dalam cara yang paling berkesan.

Construction engineers overlook an engineering project from planning stage until completion stage of the project. It is their responsibility to ensure the project is conducted as per planned and within the allocated time and budget, and conformed to given specifications. They manage the workloads and work schedules to ensure that the project runs smoothly and financially sound. They have to be responsive to ever changing natures of the construction processes as the project progresses to make sure the resources and workforce are utilized efficiently.

(iii) Kejuruteraan Struktur / Structural EngineeringJurutera struktur ditugaskan untuk merekabentuk struktur- struktur seperti jambatan, bangunan dan stesen janakuasa. Mereka menggunakan bahan-bahan seperti keluli, kayu dan konkrit, dan lazimnya bekerjasama dengan arkitek untuk memastikan struktur indah yang diilhamkan oleh arkitek dapat dibina dan selamat untuk kegunaan atau kediaman manusia.


Structural engineers are responsible to design structures such as bridges, buildings and power stations. They utilize materials like steel, timber and concrete and work with architects in ensuring the beautiful structures inspired by architects are securely built for occupation.

(iv) Kejuruteraan Sumber Air / Water Resources EngineeringJurutera-jurutera sumber air menganalisa dan merekabentuk takungan dan bekalan air, sistem penyaliran, empangan, struktur-struktur kejuruteraan sungai, stesen pengepam serta kerja-kerja lain yang berkaitan dengan kejuruteraan sungai dan pantai.

Water resources engineers analyze the availability and reliability of water sources and design reservoirs, distribution system, dams, water engineering structures, pump stations and other projects related to river and coastal engineering.

(v) Kejuruteraan Pengangkutan / Transportation EngineeringKejuruteraan pengangkutan menggunakan prinsip-prinsip saintifik dan teknologi dalam perancangan, reka bentuk berfungsi, operasi dan pengurusan kemudahan untuk sebarang mod pengangkutan. Ini untuk memastikan prasarana yang disediakan adalah selamat, cekap, cepat, selesa, mudah, ekonomi, serta mesra alam dalam mengangkut manusia dan barangan.

Transportation engineering is the application of technology and scientific principles to the planning, functional design, operation and management of facilities for any mode of transportation in order to provide safe, efficient, rapid, comfortable, convenient, economical, and environmentally compatible for the movement of people and goods.


STRUKTUR PROGRAM / Programme struCture

Tahun 1 / year 1

Kod/Code Kursus/Course Semester 1Semester

2Semester

3

Requisite/ Pre-requisite/ Co-requisite

Kursus Universiti / University CoursesMPU3122 / MPU3172*

Tamadun Islam dan Tamadun AsiaIslamic and Asian Civilization / Apresiasi Budaya Masyarakat Malaysia*Appreciation of Malaysian Culture*

2

PPD1041 Kemahiran Insaniah dan KesukarelawananSoftskills and Basic Volunteerism 1

MPU3112 / MPU3142*

Hubungan EtnikEtnic Relations /Bahasa Melayu Komunikasi 2*Malay Language for Communication 2*

2

PPD1032 Kokurikulum BerkreditCredit Co-curricular 2

Jumlah / sub total 3 4Kursus Teras Fakulti / Faculty Core CoursesKNF1013 Kejuruteraan Matematik 1

Engineering Mathematics 1 3

KNF1023 Kejuruteraan Matematik 2Engineering Mathematics 2 3

Pre-requisite: KNF1013

Jumlah / sub total 3 3Kursus Teras Program / Programme Core CoursesKNS1022 Lukisan Kejuruteraan

Engineering Drawing 2

KNS1042 Bahan Kejuruteraan SivilCivil Engineering Materials 2

KNS1451 Makmal Kejuruteraan Sivil 1Civil Engineering Laboratory 1 1

KNS1472 Pengurusan Kejuruteraan SivilCivil Engineering Management 2

KNS1633 Mekanik KejuruteraanEngineering Mechanics 3

KNS1063 Kekuatan BahanStrength of Materials 3

Requisite: KNS1633

KNS1073 Survei KejuruteraanEngineering Survey 3

KNS1102 Geologi KejuruteraanEngineering Geology 2


KNS1482 Kejuruteraan PemprogramanEngineering Programming 2

Jumlah / sub total 10 11Jumlah Keseluruhan / total 16 18

Nota/Notes:* Untuk pelajar antarabangsa sahaja / For international students only* Semester untuk pengambilan kursus-kursus dalam kategori Kursus Universiti adalah cadangan sahaja. Semesters for taking courses in the University Courses category are for recommendation only.


Tahun 2 / year 2


2Semester

3


Kursus Universiti / University CoursesPBI1102 / PBI1092

Academic English I /Academic English II 2

XXUxxx3 Elektif UniversitiUniversity Elective 3

MPU3412 Kompentesi ICTICT Competency 2


Jumlah / sub total 5 5Kursus Teras Fakulti / Faculty Core CoursesKNF2033 Kejuruteraan Matematik 3

Engineering Mathematics 3 3Pre-requisite: KNF1023

Jumlah / sub total 3Kursus Teras Program / Programme Core Courses

KNS2093 Teori StrukturTheory of Structure 3Requisite: KNS1063

KNS2113 Mekanik BendalirFluid Mechanics 3

KNS2123 Mekanik TanahSoil Mechanics 3


KNS2133 Analisis StrukturStructure Analysis 3Pre-requisite: KNS2093

KNS2153 HidraulikHydraulics 3Pre-requisite: KNS2113

KNS2163 Kejuruteraan GeoteknikalGeotechnical Engineering 3Pre-requisite: KNS2123


KNS2723 Kaedah Numerical dan StatistikNumerical Methods and Statistics 3Pre-requisite: KNF2033




Tahun 3 / year 3


2Semester

3


Kursus Universiti / University CoursesPBI1072 / PBI1082

English for Professional Communication / English for Occupational Purposes 2

MPU3312 / MPU3312*

Bahasa MelayuMalay Language / Bahasa Melayu Komunikasi Lanjutan* Advanced Malay Language for Communication*

2

*Pre-requisite: MPU3142

MPU3222 Asas Pembudayaan KeusahawananFoundation of Entrepreneurship Enculturation

2


Jumlah / sub total 4 5Kursus Teras Fakulti / Faculty Core CoursesKNF3065 Latihan Industri

Industrial Training 5Requisite: KNS3753

Jumlah / sub total 5Kursus teras Program / Programme Core CoursesKNS3143 Kejuruteraan Hidrologi

Hydrology Engineering 3Requisite: KNS2153

KNS3243 Kejuruteraan TapakFoundation Engineering 3

Requisite: KNS2163

KNS3493 Kejuruteraan LebuhrayaHighway Engineering 3


KNS3742 Rekabentuk Konkrit Bertetulang 1 Reinforced Concrete Design 1 2

Pre-requisite: KNS2133

KNS3233 Kejuruteraan Air dan Air SisaWater and Wastewater Engineering 3

KNS3333 Teknologi PembinaanConstruction Technology 3

Requisite: KNS1472

KNS3433 Kejuruteraan TrafikTraffic Engineering 3


KNS3753 Rekabentuk Konkrit Bertetulang 2 Reinforced Concrete Design 2 3


Jumlah / sub total 12 13Jumlah Keseluruhan / total 16 18 5



Tahun 4 / year 4


2Semester

3


Kursus Universiti / University Courses

Jumlah / sub totalKursus Teras Fakulti / Faculty Core Courses

Jumlah / sub totalKursus Teras Program / Programme Core CoursesKNS4193 Kejuruteraan Sumber Air

Water Resources Engineering 3Requisite: KNS3143

KNS4222 Projek Tahun Akhir 1Final Year Project 1 2

KNS4442 Projek Rekabentuk Bersepadu 1Integrated Design Project 1 2

Requisite: KNS3243 & KNS3753

KNS4713 Pengurusan ProjekProject Management 3

KNS4793 Rekabentuk Struktur KeluliStructural Steel Design 3

Requisite: KNS2133

KNS4254 Projek Tahun Akhir 2Final Year Project 2 4


KNS4343 Ekonomi Kejuruteraan Engineering Economy 3

KNS4673 Projek Rekabentuk Bersepadu 2Integrated Design Project 2 3


KNS4732 Etika dalam Kejuruteraan SivilEthics in Civil Engineering 2

Jumlah / sub total 13 12Kursus elektif Program / Programme elective CoursesKNS4xx3 Elektif Program

Programme Elective 3

KNS4xx3 Elektif ProgramProgramme Elective 3




KNS4313 Kejuruteraan Jambatan Bridge Engineering

KNS4393 Struktur Hidraulik Hydraulics Structures

KNS4403 Kejuruteraan Sungai dan Pesisir River and Coastal Engineering

KNS4423 Kejuruteraan Kayu Timber Engineering

KNS4503 Teknologi Perumahan Housing Technology

KNS4523 Pengurusan Tenaga Energy Management

KNS4533 Teknologi Konkrit Concrete Technology

KNS4543 Kejuruteraan Geo-Alam Sekitar Geo-Environmental Engineering

KNS4553 Dinamik Tanah Soil Dynamics

KNS4573 Sistem dan Perancangan Pengangkutan Bandar Urban Transportation System and Planning

KNS4583 Rekabentuk Konkrit Pra-tegasan Pre-stressed Concrete Design

KNS4683 Kajian Impak Alam Sekitar dan Pengurusan Sisa Environmental Impact Assessment and Waste Management

KNS4763 Rekabentuk, Pembinaan dan Penyelengaraan Turapan Jalan Pavement Design, Construction and Maintenance

KNS4773 Pengenalan kepada Kejuruteraan Gempa Bumi Introduction to Earthquake Engineering

KNS4783 Pengurusan Kontrak Kejuruteraan Engineering Contract Management

Kursus Elektif Program yang Ditawarkan / Programme Elective Courses Offered



Pensyarah / Lecturers

Prof Ir. Dr Andrew Ragai Henry [email protected]/ext : 3220

Prof Dr Sinin Hamdan [email protected]/ext : 3225

Prof Madya Dr Abdullah Hj Yassin [email protected]/ext : 3324

Ir. Dr David Chua Sing Ngie [email protected]/ext : 4519

Dr Abang Mohammad Nizam Abang Kamaruddin [email protected]/ext : 3254/3212

Ir. Dr Mohd Danial [email protected]/ext : 3265

Prof Madya Dr Syed Tarmizi Syed Shazali [email protected] /ext : 3296

Prof Madya Dr Abu Saleh Ahmed [email protected]/ext : 3299

Prof Dr M. Shahidul Islam [email protected]/ext : 3282

Prof Dr Amir Azam Khan [email protected]/ext : 3322

Sarjana Muda Kejuruteraan Mekanikal Dengan KepujianBachelor of mechanical engineering with honoursDr Annisa Jamali [email protected]/ext : 4516

Sarjana Kejuruteraan (Mekanikal)master of engineering (mechanical)Dr Marini Sawawi [email protected] samb/ext : 3303

Ketua Jabatan / head of departmentDr Noor Hisyam Noor Mohamed

[email protected] samb/ext : 3340

JABATAN KEJURUTERAAN MEKANIKAL /dePartment of meChaniCal engineering

Staf Akademik / academic staff


Encik Muhamad Fadzli Ashari [email protected]/ext :

Encik Mohd Syahmi Jamaludin [email protected]/ext : -

Encik Rasli Muslimen [email protected]/ext : 3305

Encik Mohamad Syazwan Zafwan Mohamad Suffian [email protected]/ext : 3295

Encik Mohamad Iskandar Jobli [email protected]/ext : 3318

Dr Shirley Johnathan Tanjong [email protected]/ext : 2620

Dr Nicholas Kuan Hoo Tien [email protected]/ext : 3290

Dr Magdalene Andrew Munot [email protected]/ext : 3300

Dr Khairul Fikri Tamrin [email protected]/ext : 2618

Dr Ana Sakura Zainal Abidin [email protected]/ext : 3306

Encik Hishammudin Afifi Huspi [email protected]/ext : 3228

Encik Ahmad Adzlan Fadzli Khairi [email protected]/ext :

Encik Abg Mohd Aizuddin Abg Mohd Mohtar [email protected]/ext : -

Cik Siti Nor Ain Musa [email protected]/ext : 3496/3310

Encik Mohd Azrin Mohd [email protected]/ext : 3226

Puan Ervina Junaidi [email protected]/ext : 2603

Dr Mahshuri Yusof [email protected]/ext : 3289

Dr Shahrol [email protected]/ext : 4531

Dr Lidyana Roslan [email protected]/ext : 3254

Dr Nur Tahirah Razali [email protected]/ext : 3317

Dr Aidil Azli Alias [email protected]/ext : 2642



1.0 Penubuhan Program / Programme establishment

Keperluan tenaga kerja dalam bidang Kejuruteraan Mekanikal dan Pembuatan sememangnya amat diperlukan sejajar dengan kedudukannya sebagai bidang pengajian yang tertua, terbesar dan terluas di kalangan negara-negara membangun. Kejuruteraan ini mempunyai pengkhususan yang amat luas merangkumi keperluan tenaga dan petroleum, kajian bahan-bahan, sistem rekabentuk, kajian bendalir dan pengkhususan dalam proses pembuatan. Kajian-kajian ini merupakan nadi kepada pertumbuhan industri dan teknologi. Malaysia sebagai sebuah negara yang membangun pesat amat memerlukan graduan dalam bidang kejuruteraan ini untuk memastikan pembangunan yang berterusan demi mencapai pertumbuhan ekonomi dan industri yang terjamin pada masa akan datang.

Selain itu, berdasarkan Pelan Induk Perindustrian Ketiga (IMP3), Malaysia dijangka merangka strategi untuk mencapai daya saing global jangka panjang melalui transformasi dan inovasi sektor pembuatan dan perkhidmatan yang selari dengan penubuhan program kejuruteraan ini.

Program ini bermatlamat untuk mengeluarkan graduan yang mantap dan mampu untuk menghadapi cabaran dan perubahan dalam kemajuan sains dan teknologi, melahirkan graduan yang berfikiran kritikal dan mempunyai daya penyelesaian masalah yang tinggi, mempersiapkan graduan dengan menunjukkan profesionalism, nilai etika yang mulia serta bermoral di samping berjaya menerapkan ilmu yang dibekalkan, serta melahirkan graduan yang mempunyai daya kepimpinan serta ketrampilan diri yang tinggi, proaktif serta peka kepada keperluan masyarakat dari semasa ke semasa, dan berpandangan jauh untuk menyokong pertumbuhan negara melalui bidang penyelidikan dan pembangunan.

Work force in the field of Mechanical and Manufacturing Engineering is extremely required; this is in accordance with its position as one of the oldest, biggest and widest field of studies in developed countries. This field of engineering covers a wide scope of specialization, including energy and petroleum, materials research, systems design, fluid mechanics research and manufacturing. These research areas are important for the development of industries and technologies. Malaysia, as developing nation requires graduates in the field of Mechanical and Manufacturing Engineering to ensure continuous development to achieve a strong economic and industrial growth in the future.

In addition, according to the Third Industrial Master Plan (IMP3), Malaysia is expected to draft a strategy to achieve long term global competitiveness through transformation and innovation of the manufacturing and service sectors; this is in-line with the development of this programme.

This programme aims to produce graduates who are capable of facing challenges and changes in science and technology, with critical thinking and higher problem solving skills. This program also aims to equip graduates with attributes that include professionalism, ethics and moral values; in addition to the graduates capable of applying the engineering knowledge. Finally, this


programme aims to produce graduates with leadership skills, proactive and sensitive to society’s needs and forward looking in order to support the nation’s growth through research and development.

2.0 matlamat Program / Programme objectives

Matlamat program ini adalah untuk menyediakan bakal jurutera-jurutera yang berkebolehan, cekap dan berkaliber berdasarkan matlamat program; Programme Objective (PEO) seperti berikut.

This programme aims to prepare future graduates with traits as outlined in the following Programme Objective (PEO).

Peo1 Uphold the professionalism and ethics of the Mechanical and Manufacturing Engineering profession in national and/or international area.

Peo2 Enhance knowledge by practicing independence and life-long learning in order to contribute to the advancement of the profession through involvement in research and development activities.

Peo3 Promote multicultural harmony and unity amongst different races and cultures through involvement in the technical and/or non-technical societies.

3.0 hasil Pembelajaran Program / Programme outcomes (Po)

Setelah pelajar bergraduat daripada program ini, mereka berkeupayaan menguasai kebolehan-kebolehan berikut:Upon graduation, students are expected to attain the following:

PO1 Apply knowledge of mathematics, natural natural science, engineering fundamentals and an engineering specialisation to the solution of complex Mechanical and Manufacturing Engineering problems;

PO2 Identify, formulate, conduct research literature and analyse complex Mechanical and Manufacturing Engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences;

PO3 Design solutions for complex Mechanical and Manufacturing Engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal, and environmental considerations

PO4 Conduct investigation of complex Mechanical and Manufacturing Engineering problems using research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions;


PO5 Create, select and apply appropriate techniques, resources, and modern engineering and IT tools, including prediction and modelling, to complex Mechanical and Manufacturing Engineering problems, with an understanding of the limitations

PO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional Mechanical and Manufacturing Engineering practice and solutions to complex Mechanical and Manufacturing Engineering problems

PO7 Understand and evaluate the sustainability and impact of professional Mechanical and Manufacturing Engineering work in the solutions of complex Mechanical and Manufacturing Engineering problems in societal and environmental contexts;

PO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Mechanical and Manufacturing Engineering practice

PO9 Communicate effectively on complex Mechanical and Manufacturing Engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions;

PO10 Function effectively as an individual, and as a member or leader in diverse teams and in multi-disciplinary settings;

PO11 Recognise the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PO12 Demonstrate knowledge and understanding of engineering management principles and economic decision making and apply these to one’s own work, as a member and leader in a team, to manage projects in multidisciplinary environments;

4.0 Konsep Penubuhan Program / Programme Concepts

Program ini menawarkan program dalam bidang Kejuruteraan Mekanikal dengan elemen Kejuruteraan Pembuatan untuk menyediakan jurutera-jurutera yang berkebolehan dalam bidang-bidang berikut:The department offers programme in Mechanical Engineering with elements of Manufacturing Engineering which equips engineers in the following fields:

(i) Kejuruteraan Mekanikal / Mechanical EngineeringJurutera Mekanikal menjalankan tugas penyelidikan, memberi nasihat dan merekabentuk mesin-mesin pengeluaran, jentera, loji dan peralatan perindustrian. Mereka juga ditugaskan untuk membangunkan sistem perindustrian serta memberi nasihat dan memastikan sistem tersebut berfungsi di samping membuat kerja-kerja penyelenggaraan dan


pembaikan jika perlu. Selain itu, jurutera Mekanikal perlu mengkaji dan memberi nasihat berhubung dengan aspek teknologi bahan, produk, proses serta prosedur penyelenggaraan yang tertentu. Jurutera Mekanikal boleh menceburi pelbagai sektor seperti sektor teknologi dan industri pembuatan dan proses, industri rekabentuk sistem mekanikal, produk fabrikasi logam, produk getah dan plastik, industri automotif, industri elektrik dan elektronik serta industri minyak dan gas.

Careers as a Mechanical Engineer are diverse which includes conducting research, giving advice and designing machineries, plants and industrial equipment. They are also responsible for the development of industrial systems, ensuring that the systems function, as well as maintaining the systems. Mechanical Engineers also conduct research and give consultations on materials’ technology and processes, as well as certain maintenance procedures. Mechanical engineers could practice in sectors that include technology, manufacturing and process, mechanical system design, metal fabrication, rubber and plastic, automotive, electrical and electronic and oil and gas.

(ii) Kejuruteraan Pembuatan / Manufacturing EngineeringSkop kerjaya sebagai seorang jurutera Pembuatan adalah luas dan mempunyai permintaan yang tinggi terutamanya daripada pihak industri pembuatan. Antara kerjaya utama bagi seorang graduan program kejuruteraan pembuatan adalah bertugas sebagai jurutera Pembuatan di bahagian perancangan dan kawalan mutu, keselamatan industri, penyelenggaraan, atau rekabentuk pengeluaran di firma-firma tempatan dan antarabangsa.

Careers as a Manufacturing Engineer are also diverse and highly demanded by the manufacturing industry. Manufacturing Engineers have high level of technical expertise and skills, which they utilize to plan, design, set-up, modify, optimize and monitor manufacturing processes. Amongst others, a Manufacturing Engineer could work in the quality planning & control section, industrial safety, maintenance or design new systems and processes in local or international companies.


Year 1

Code Course S1 S2 S3 Requisite/ Pre-requisite / Co-requisite

University Courses

MPU3122 / MPU3172*

Islamic and Asian Civilization / Appreciation of Malaysian Culture* 2

PPD1041 Softskills and Basic Volunteerism 1

PPD1032 Credit Co-curricular 2

XXUxxx3 University Elective 3

Sub total 3 5

Faculty Core Courses

KNF1013 Engineering Mathematics 1 3

KNF1023 Engineering Mathematics 2 3 Pre-requisite: KNF1013

Sub total 3 3

Programme Core Courses

KNJ1013 Statics 3

KNJ1072 Engineering Drawing 2

KNJ1033 Thermodynamics 1 3

KNJ1433 Engineering Materials 3

KNP1091 Workshop Practice 1

KNJ1023 Dynamics 3 Pre-requisite: KNJ1013

KNJ1083 Solid Mechanics 1 3 Pre-requisite: KNJ1013

KNJ1053 Fluid Mechanics 1 3

KNJ1231 Engineering Laboratory 1 1

Sub total 12 10

Total 18 18

Notes: *For international student


Year 2


University Courses

PBI1102 / PBI1092 Academic English 1 / Academic English 2 2


MPU3412 ICT Competency 2

MPU3312 / MPU3142*

Malay Language / Malay Language Communication 2* 2

Sub total 5 4


KNF2033 Engineering Mathematics 3 3 Pre-requisite: KNF1023

Sub total 3


KNJ2133 Solid Mechanics 2 3 Requisite: KNJ1083

KNJ2093 Programme Core Courses 3 Requisite: KNJ1033

KNJ2472 Electrical Engineering Technology 2

KNJ2222 Analysis of Mechanics and Machines 2 Requisite: KNJ1023

KNJ2511 Engineering Laboratory 2 1 Requisite: KNJ1023 & KNJ1083

KNP2013 Manufacturing Technology 3

KNJ2103 Fluid Mechanics 2 3 Requisite: KNJ1053

KNJ2523 Heat Transfer 3 Requisite: KNJ2093

KNJ2332 Engineering Programming 2

KNJ2463 Electronics and Microprocessors 3

KNJ2251 Engineering Laboratory 3 1 Requisite: KNJ2093

Sub total 11 15

Total 19 19


Tahun 3 / Year 3


University Courses

PBI1072 / PBI1082

English for Professional Communication / English for Occupational Purposes 2

MPU3112 / MPU3322

Ethnic Relations / Advanced Malay Language For Communication 2 *Requisite: MPU3142


MPU3222 Basic Entrepreneurship Culture 2

Sub total 4 5


KNF3102 Engineering Ethics 2

KNF3065 Industrial Training 5

Sub total 2 5


KNP3053 Manufacturing System 3 Requisite: KNP2013

KNJ3423 Engineering Economy & Finance 3

KNP3483 Engineering Design 1 3 Requisite: KNJ1072 & KNJ2133

KNJ3543 Instrumentation and Measurement 3

KNJ3531 Engineering Laboratory 4 1 Requisite: KNJ2103

KNJ3373 Finite Element Analysis 3

KNP3063 Robotics and Automation 3

KNJ3553 Mechanical Vibration 3 Requisite:KNJ3543

KNP3493 Engineering Design 2 3 Pre-requisite: KNP3483

KNJ3562 Numerical Methods 2 Requisite: KNF2033 & KNJ2332

Sub total 13 14

Total 19 19 5


Tahun 4 / Year 4


University Courses

- -

Sub total


- -

Sub total


KNJ4192 Final Year Project 1 2

KNP4414 Integrated Design 4 Requisite: KNP3493

KNP4073 Advanced Manufacturing Systems 3 Requisite: KNP3053

KNJ4573 Control Engineering 3 Requisite:KNJ3543

KNJ4214 Final Year Project 2 4 Pre-requisite: KNJ4192

KNP4083 Quality Control & Reliability 3

KNP4443 Engineering Management 3

Sub total 12 10

Programme Elective Courses**

KNJ4302 Computational Fluid Dynamics 2 Requisite: KNJ1033 & KNJ2103

KNP4042 Energy Resources and Management 2 Requisite: KNJ1033 & KNP2013

KNJ4392 Polymer and Composite 2 Requisite: KNJ1433

KNJ4582 Engineering Statistics 2

KNP4592 Manufacturing Modeling and Simulation 2

KNJ4312 Tribology 2

KNJ4322 Internal Combustion Engine 2 Requisite: KNJ2093

KNP4342 Operations Research 2 Requisite: KNJ3423

KNP4602 Manufacturing Systems Analysis 2 Requisite: KNP3053

KNP4612 Remanufacturing Operations and Management 2

Sub total 2 2

Total 14 12

Notes: **Need to choose 1 course per semester.



Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Komputer)Bachelor of engineering(hons) in electronics (Computer) Dr Siti Kudnie Sahari [email protected]/ext : 3264

Sarjana Kejuruteraan (Sistem Komunikasi)master of engineering (Communication systems)Prof Madya Ir. Dr Kismet Anak Hong Ping [email protected]/ext : 3233

Prof Madya Dr Thelaha Masri [email protected]/ext : 3391

Prof Madya Dr Ahmed Mohamed Ahmed [email protected]/ext : 2663

Prof Dr Musse Mohamud Ahmed [email protected]/ext : 2679

Prof Ir. Dr Al-Khalid Hj Othman [email protected]/ext : 3325

Prof Madya Dr Hushairi Zen [email protected]/ext : 3207

Prof Madya Dr Mohd Saufee Muhammad [email protected]/ext : 2636

Pensyarah / lecturers

Sarjana Muda Kejuruteraan (Kepujian) Kejuruteraan Elektrikal dan ElektronikBachelor of engineering (hons) electrical and electronics engineeringEncik Mohd Ridhuan Mohd Sharip [email protected]/ext : 2633

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Telekomunikasi)Bachelor of engineering (hons) in electronics (telecommunications) Dr Kho Lee Chin [email protected]/ext : 4541

Ketua Jabatan / head of departmentDr Shafrida Sahrani

[email protected]/ext : 3339

JABATAN KEJURUTERAAN ELEKTRIKAL DAN ELEKTRONIK /DEPARTMENT OF ELECTRICAL AND ELECTRONIC

ENGINEERINGStaf Akademik / academic staff


Dr Martin Anyi [email protected]/ext : 3237

Prof Madya Sakena Abdul Jabar [email protected]/ext : 3291

Dr Rohana [email protected]/ext : 2414

Dr Annie Joseph [email protected]/ext : 3211

Dr Yonis. M. Yonis [email protected]/ext : 2627

Prof Madya Dr Mohamed Abdelmoneim [email protected]/ext : 3277

Dr Nordiana [email protected]/ext : 3395

Dr Abdul Rahman [email protected]/ext : 2641

Dr Tengku Mohd Afendi [email protected]/ext : 4527

Dr Dyg Norkhairunnisa Abang [email protected]/ext : 2634

Dr Ngu Sze Song [email protected]/ext : 3304

Ir. Dr David Bong Boon [email protected]/ext : 3313

Dr Tay Kai Meng [email protected]/ext : 3297

Dr Dayang Azra Awang Mat [email protected]/ext : 3309

Ir. Dr Hazrul Mohamed Basri [email protected]/ext : 2657

Prof Madya Dr Wan Azlan Wan Zainal Abidin [email protected]/ext : 2338

Dr Norhuzaimin Julai [email protected]/ext : 3326

Dr Ade Syaheda Wani Marzuki [email protected]/ext : 2435

Dr Yanuar Zulardiansyah Arief [email protected]/ext : 2622

Dr Kuryati Kipli [email protected]/ext : 3285

Ir. Rudiyanto Philman [email protected]/ext : 2608

Encik Abdul Hafiz Abdul Karim [email protected]/ext : 3270


Cik Shamsiah Suhaili [email protected]/ext : 2667

Puan Kasumawati Lias [email protected]/ext : 2658

Encik Asrani Lit [email protected]/ext : -

Dr Dyg Nur Salmi Dharmiza Awg Salleh [email protected]/ext : 3319

Encik Azfar Satari Abdullah [email protected]/ext : 4230

Dr Mohd Faizrizwan Mohd Sabri [email protected]/ext : 2074

Puan Shirley Anak Rufus [email protected]/ext : -

Puan Nur Alia Athirah Hj. Mohtadzar [email protected]/ext : 3318

Puan Sharifah Masniah Wan Masra [email protected]/ext : 2635

Puan Maimun Huja Husin [email protected]/ext : 2672

Puan Nazreen Junaidi [email protected]/ext : -

Encik Ng Liang Yew [email protected]/ext : 3269

Encik Hazmi Hijazi Abdul Halim [email protected]/ext : 3298

Encik Mohd Hafiez Izzwan Saad [email protected]/ext : 3274

Puan Nurul ‘Izzati Hashim [email protected]/ext : -

Dr Nurdiani Zamhari [email protected]/ext : 3350



1.0 Penubuhan Program / Programme Establishment

Kejuruteraan elektrikal dan elektronik adalah satu bidang professional yang penting di Malaysia di mana ia telah dikenalpasti sebagai pemangkin kepada aktiviti-aktiviti awam, swasta ataupun keperluan sektor-sektor industri elektrikal dan elektronik yang boleh menyumbang kepada ekonomi negara. Dengan adanya program ini, adalah diharapkan ia dapat menampung masalah kekurangan tenaga professional dalam bidang kritikal ini.

Electrical and electronics engineering is an important field of professional Malaysia where it has been identified as the catalytic activities of public or private sector needs electrical and electronics industry that can contribute to the national economy. With this program, it is hoped that it can accommodate the shortage of professionals in this critical field.

2.0 Matlamat Program / Program Objectives

Matlamat program ini adalah untuk menyediakan bakal jurutera yang berkebolehan, cekap dan berkaliber berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

The aim of this program is to prepare future engineers who are capable, competent and high caliber based Programme Objective (PEO) Department as follows:

Peo1 Apply Electrical and Electronics Engineering knowledge and skills at their respective career in globally competitive environment.

Peo2 Uphold the importance of professionalism and ethics in Engineering profession to contribute to the society.

Peo3 Practice leadership and management skills in workplace and/or society.

3.0 Hasil Pembelajaran Program / Programme Outcomes

Setelah pelajar-pelajar bergraduat dari program ini, mereka berkeupayaan menguasai kebolehan-kebolehan berikut:Upon graduation from the programme, the students are expected to acquire the following attributes:

PROGRAM KEJURUTERAAN ELEKTRONIK (TELEKOMUNIKAsI) /Programme of eleCtroniCs engineering

(teleCommuniCations)


PO1 Apply knowledge of mathematics, natural science, engineering fundamentals and an engineering specialization to solve complex Electrical and Electronics problems;

PO2 Identify, formulate, conduct research literature and analyze complex Electrical and Electronics engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences;

PO3 Design solutions for complex Electrical and Electronics engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural societal and environment considerations;

PO4 Conduct investigation into complex Electrical and Electronics engineering problems using research-based knowledge and reseach method including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions;

PO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, including prediction and modelling to complex Electrical and Electronics engineering problems, with an understanding of the limitations;

PO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional Electrical and Electronics engineering practice and solutions to complex Electrical and Electronics engineering problems;

PO7 Understand and evaluate the sustainablity and impact of professional Electrical and Electronics engineering works in the solutions of complex Electrical and Electronics engineering problems in societal and environmental contexts;

PO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Electrical and Electronics engineering practice;

PO9 Communicate effectively on complex Electrical and Electronics engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions;

PO10 Function effectively as an individual and as a member or leader in diverse teams in multi-disciplinary settings.;

PO11 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.;

PO12 Demonstrate knowledge and understanding of engineering and management principles and economic decision making, and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.


4.0 Konsep Penubuhan Program / Programme Concepts

Kerajaan Negeri Sarawak telah mengumumkan koridor ekonomi baru iaitu Sarawak Corridor of Renewable Energy (SCORE) yang berpusat di sepanjang pantai dari Tanjung Manis ke Samalaju. UNIMAS selaku sebuah pusat penyelidikan dan pembangunan sumber manusia di negara ini, telah terpanggil untuk memperhebatkan pembangunan modal insan khususnya jurutera di dalam bidang elektrikal dan elektronik bagi menampung keperluan tenaga mahir dan professional. Program kejuruteraan elektrikal dan elektronik ini ditawarkan bagi melahirkan graduan yang memenuhi keperluan tenaga manusia dalam sector kejuruteraan penjanaan, pengagihan dan penghantaran kuasa, kejuruteraan elektrik dan elektronik yang lain.

Sarawak state government has announced a new economic corridor Sarawak Corridor of Renewable Energy (SCORE) which is centered along the coast from Tanjung Manis to Samalaju. UNIMAS as a center of research and development of human resource in the country, has called for human capital development especially in the field of electrical and electronics engineering to accommodate skilled workers and professional purposes. Electrical and electronics program is offered for to produce graduate that meets the needs of manpower in electrical and electronics sector and power generation, distribution and delivery sector.

Fakulti KejuruteraanB

visi - feng.unimas.my · visi untuk menjadi sebuah universiti contoh serta diiktiraf di peringkat...

Documents