resume prakash

8
Experience Mar 2013 – Present (2 years 9 months ) In General Senior NPI Engineer Finisar Malaysia Sdn Bhd | Perak, Malaysia “Finisar is the world's largest supplier of optical communication products. For nearly three decades, we have led the industry in creating and delivering break-through optics technology and world-class products that improve the way we communicate” • Selected to assist in project 100G ( long range – CFP2 10km ) – current company top product.( Assist main NPI Engineer handling CFP2) Prakash A/L Nanthagobaloo Senior NPI (New Product Introduction) Engineer at Finisar Malaysia Sdn Bhd (+60) 012-2978941 | [email protected] | 32 years old | IPOH, Perak Experience 8 years+ Education1 University of Malaya (UM) Master’s in Business Administration (MBA), General Management (2014) Education2 University of Tenaga Nasional (UNITEN Kajang/Bangi) Bach Degree, Electronic & Electrical Engineering (2007) Nationality Malaysia PR Malaysia

Upload: prakash-nantha

Post on 11-Apr-2017

164 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Resume Prakash

Experience

Mar 2013 – Present(2 years 9 months )

In General Senior NPI Engineer

Finisar Malaysia Sdn Bhd | Perak, Malaysia

“Finisar is the world's largest supplier of optical communication products. For nearly three decades, we have led the industry in creating and delivering break-through optics technology and world-class products that improve the way we communicate”

• Selected to assist in project 100G ( long range – CFP2 10km ) – current company top product.( Assist main NPI Engineer handling CFP2) • Work relentlessly to drive the product yield improvement, scrap cost reduction, debugging, tester maintenance, signal analyzer and product trainer.

ACCOMPLISHMENTS:1) Assist in generating more than 0.3 million per week 2) Appreciate note from SNY Executive VP on fulfilling additional delivery to customers

3) Successfully help the company to gain profit margin of more than 10 million for the product. The success has brought high performance appraisal for me as P2 (performance above average)

4) Selected by top management team as one of the best team player.

• Selected to take up another new project 100G ( long range – CFP4 10km ) – higher version of CFP2

Prakash A/L NanthagobalooSenior NPI (New Product Introduction) Engineer at Finisar Malaysia Sdn Bhd(+60) 012-2978941 | [email protected] | 32 years old | IPOH, Perak

Experience 8 years+

Education1 University of Malaya (UM) Master’s in Business Administration (MBA), General Management (2014)

Education2 University of Tenaga Nasional (UNITEN Kajang/Bangi)

Bach Degree, Electronic & Electrical Engineering (2007)

Nationality Malaysia

PR Malaysia

Page 2: Resume Prakash

in a smaller size as upcoming company top product ( This time as the main NPI Engineer for CFP4 )• Assigned to handle the latest 100G telecommunication product up to date • Work relentlessly to drive the product yield improvement, scrap cost reduction, debugging, tester maintenance, signal analyzer and product trainer• Transfer new product technology from headquarter ( US ) back to Malaysia, IPOH plant.

ACCOMPLISHMENTS:1) Smooth product transfer from US to Malaysia, IPOH plant.2) Assigned to represent the department to travel to US for technology transfer3) Successfully help the company to gain profit margin of more than 2.5 million for the product under my

care. Profit margin expected to grow 10 folds as more customers are in the midst of qualifying the product.

4) Selected by top management team as one of the best employee of the year.

RESPONSIBILITIES:

• Take the lead role in leading the technical team for NPI product transfer.• Product responsibility from ‘womb’ ( tester and product ) to ‘grave’.• Work closely with the RnD, planning and purchasing teams, utilize relationships to ensure that product implementation/delivery schedules are met.• Knowledge transfer thru appropriate training and tools to Engineering team members.• Yield improvement and test time reduction are main precedence• Scrap cost reduction• Product BOM setup and shrinkage rate implementation• Failure mode analysis (FMEA)• Hardware debugging• Product specification limit optimization• Tester setup and qualification

EXPERIENCES GAINED IN SUMMARY:

1) Expert in new product transfer and line setup without any hiccups.

2 ) Lead the NPI team towards the success.3) Great understanding in manufacturing working operation to deliver customer satisfactory and expectation.4) Experience in report generation and compilation(yield,8D,FMEA,RMA,RTV,etc)5) Data mining and analysis6) Failure mode analysis7 ) Capable in basic data query through SQL.8) Certified on IPC-610D and VBA macro for Excel.

Jul 2007 – Jan 2013(5 years 6 months )

In GeneralProduct & Process EngineerEpson Precision Malaysia Sdn Bhd | Kuala Lumpur, Malaysia

“Global manufacturer & supplier of Quartz Oscillators - Semiconductors

Production volume of 843 million units/year. The company have been established

since 1974 & product manufactured are Quartz Oscillators, Real Time Clock and

GYRO sensors”

 

RESPONSIBILITIES:

• Take the lead in improving quality, profitability and processes within the plastics injection molding manufacturing

industry.

Page 3: Resume Prakash

• Assist in systems/process design, cost-reduction strategies and energy-saving solutions.

• Lead for innovative problem solving, complex troubleshooting and skillful relationship-building with multidisciplinary

teams.

• Strong understanding of plastics industry manufacturing processes such as transfer molding, precision machining,

assembly and packaging.

ACCOMPLISHMENTS:

Promoted to senior product & process engineer in 2009 for large scale projects. (Projects highlighted in key results ).

In previous position, functioned as process engineer/team leader for high priority initiatives involving new product set-

up, cost controls/reductions, process optimization studies, eliminate defects and customer claim issues which

improves company image in the eyes of the customer.

Key Results :

1. Guided project team in developing machine design to eliminate customer claim ( zero solder burr defects )

that boosted companies profitability. The total estimated saving per year is USD 454,010 and the return of

investment is within 3 working days. The spillover effects is :

a) Energy saving & CO2 emission reduction by 1,245KW / Year that is equivalent to 710 kg. CO2 emission / Year (Abolished additional lighting & electricity consumption at rework area )

b) Space Saving of 233 m² (Abolished additional space for rework & temporary inventory storage )

c) Played an instrumental role on trim & form die designing enhancements that were subsequently

adopted companywide.

2. Guided team project in improving yield rate for a particular product from 90.00% to 99.53% by reducing the

highest defect rate in the process.Total estimated saving per year : RM 720,1123. Implement and refine manufacturing processes by applying continuous improvement and lean manufactur-

ing principles to all areas of production which achieved a final /total yield rate to an all-time high of 99.5%

4. Served as a member of the Manufacturing Engineer Group accountable for developing cost-effective solu-

tions to manufacturing production issues. Introduced local made packaging material rather than imported

material from Japan which managed to reduce cost by 50% with better quality.

5. Upheld quality standards that helped the operation earn ISO 9001 certification specifically in establishment,

maintenance & control all technical/Engineering Standards or Specification.

6. Identified savings/improvement opportunities and solved challenging technical, process-flow and resource-

limitation problems.

7. Saved RM 50K in fixed costs by spearheading new control procedures for package scratches cleaning

method that extended rubber cleaner lifespan by several years.

8. Relied on as one of plant’s primary trainers of newly hired process engineers. Led comprehensive training

on topics including safe operations of process units including SOPs, Root Cause Analysis, SPC analysis,

and defect analysis methods, standards and procedures.

9. Improve Electrostatic Discharge ( ESD )control in clean room environment where sensitive integrated cir-

cuit ( IC ) is used.

10. Convert DOS based Electrical Inspection machines to WINDOWs based which improves efficiency and

throughput.

11. Carry out machine layout change to improve worker movement efficiency and reduce manpower needs for

each process.

Page 4: Resume Prakash

12. Winner of World-Wide E-Kaizen Competition in Japan among Epson Subsidiaries in 2009 for zero solder

burr defects ( stated in key results )

Industrial Training Experience

UNISEM (M) Sdn. Bhd. – Located in Ipoh, PerakPlaced in the Machine Maintenance department of the End Of Line (EOL).

Assisted in corrective and preventative maintenance of the production machines.Performed process audit throughout the production line.Designed a metal plate for Laser Marking machine to prevent wrong orientation ( poka-miss ) by machine operators.

Education

2014 University of Malaya (UM)Master’s in Business Administration (MBA) | Malaysia

  Major General Management  Achievement Graduated with CGPA 3.41

2007 University of Tenaga Nasional (UNITEN)Bachelor's Degree in Engineering | Malaysia

  Major Electrical & Electronic  Grade

AchievementGrade 2nd class upperDean’s List for 3 semestersGraduated with CGPA 3.16

   

Skills

Advanced JMP software for statistical study, Statistical Process Chart (SPC), 7 QC Tools, 6 sigma, 5S control, Electrostatic Discharge Control (ESD), Failure Mode Analysis (FMEA), Root Cause Analysis (RCA), Cost Control & Scrap Reductions, Production Operation and Engineering works especially on Electronic sub-assembly & NPI Module Level, Die attach, Wire Bonding, Crystal Welding, Transfer Molding, Laser marking, Trim & Form, Technical Analysis, TEAM LEADERSHIP, Verbal And Written Communication, Product Development, Decision Making Skills, Time Management Skills, Power Point Presentations, 8D Technical Report Writing

Intermediate Office Skills, IPC inspection, programming language (VBA, SQL, C ), Project Management, Training Management, Total Quality Management (TQM)

Training Courses

Courses JMP Software for Statistical Analysis

Page 5: Resume Prakash

Statistical Process Chart (SPC)Measurement System Analysis (MSA)Stress Management8D WorkshopProject Management7 QC ToolsFailure Mode Analysis (FMEA)Electrostatic Discharge (ESD)Root Cause Analysis (RCA)IPC-A-600 Acceptability of Printed BoardsImproving SMT PCBA ProcessVBA Microsoft Excel 2007Handling Difficult PeopleHow to Conduct Performance AppraisalKepner Tregoe

Languages

Proficiency level: 0 - Poor, 10 – Excellent

Language Spoken Written Relevant CertificatesEnglish (Primary) 8 8 -Bahasa Malaysia 8 8 -TamilJapanese

8 5 - 4 4 -

     Jobstreet English Language Assessment (JELA)Date Taken 3rd Jan 2016Score 36/40

     

Additional Info

Expected SalaryNotice PeriodCurrent SalaryContractual bonusHandphone allowancePreferred Work Location

     

About Me

Gender Male, single

Address

Personal Traits

33, Jalan Taurus, Star Park 31400 IPOH, Perak, Malaysia

Great learning attitude, team player

     

Page 6: Resume Prakash

References

Name: Yau Yin HanPosition: Staff Engineer

Company: Finisar Malaysia Sdn Bhd Address: Jalan Kelebang 1/3 Zon Perdagangan Bebas Kinta 31200 Chemor, Perak Hp: 016-5494549

Name: Suresh Kumar RajooPosition: Staff Engineer

Company: Finisar Malaysia Sdn Bhd Address: Jalan Kelebang 1/3 Zon Perdagangan Bebas Kinta 31200 Chemor, Perak

Hp: 012-3040845

Appendices of Key Results

Page 7: Resume Prakash