identitas barang

7/27/2019 Identitas Barang

1/42

Arduino Leonardo

Microcontroller :ATmega32u4

Input Voltage (limits) :6-20V

Digital I/O Pins :20

PWM Channels :7

Analog Input Channels :12

DC Current per I/O Pin :40 mA

DC Current for 3.3V Pin:50 mA

Flash Memory :32 KB (ATmega32u4) of which 4 KB used by bootloader

SRAM :2.5 KB (ATmega32u4)

EEPROM :1 KB (ATmega32u4)

Clock Speed :16 MHz

Arduino Mega R2 (Grade Ori)Microcontroller: ATmega2560Operating voltage: 5 VInput voltage (recommended): 7-12 V

Digital I/O pins: 70 (of which 14 provide PWM output)Analog input pins: 16*DC current per I/O pin: 40 mADC current for 3.3V pin: 50 mA

Flash memory: 256 KB of which 8 KB used by bootloaderSRAM: 8 KBEEPROM: 4 KB

No.

1

2

Spesifikasi Merk

Arduino

Arduino


2/42

Clock speed: 16 MHzSize: 4" x 2.1"Weight: 36 gProcessor: ATmega2560 @ 16 MHzRAM size: 8 KbytesProgram memory size: 248 KbytesMotor channels: 0User I/O lines: 701Max current on a single I/O: 40 mAMinimum operating voltage: 7 VMaximum output voltage: 12 VArduino Mega ADK

Microcontroller :ATmega2560Operating Voltage :5VInput Voltage (recommended):7-12VInput Voltage (limits) :6-20VDigital I/O Pins:54 (of which 15 provide PWM output)Analog Input Pins :16DC Current per I/O Pin :40 mADC Current for 3.3V Pin :50 mAFlash Memory :256 KB of which 8 KB used by bootloaderSRAM :8 KBEEPROM :4 KB

Clock Speed :16 MHzArduino Mega R3 (Grade Ori)Microcontroller :ATmega328Operating Voltage :5VInput Voltage (recommended) :7-12VInput Voltage (limits) :6-20VDigital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins :6

3

4

Arduino

Arduino


3/42

DC Current per I/O Pin :40 mADC Current for 3.3V Pin :50 mAFlash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM :2 KB (ATmega328)EEPROM :1 KB (ATmega328)Clock Speed :16 MHArduino Nano V3.0Microcontroller :Atmel ATmega168 or ATmega328Operating Voltage (logic level) :5 VInput Voltage (recommended) :7-12 VInput Voltage (limits) :6-20 VDigital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins :8DC Current per I/O Pin :40 mAFlash Memory :16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by

bootloaderSRAM :1 KB (ATmega168) or 2 KB (ATmega328)EEPROM :512 bytes (ATmega168) or 1 KB (ATmega328)Clock Speed :16 MHzDimensions :0.73" x 1.70"Arduino Pro Mini (Grade Ori)Microcontroller :ATmega168 or ATmega328Operating Voltage :3.3V or 5V (depending on model)

Input Voltage :3.35 -12 V (3.3V model) or 5 - 12 V (5V model)Digital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins :6DC Current per I/O Pin :40 mAFlash Memory :16 KB (of which 2 KB used by bootloader)SRAM :1 KBEEPROM :512 bytes

Arduino

5

6

Arduino


4/42

Clock Speed :8 MHz (3.3V model) or 16 MHz (5V model)Arduino Uno 2011 (Grade Ori)Microcontroller :ATmega328Operating Voltage :5VInput Voltage (recommended) :7-12VInput Voltage (limits) :6-20VDigital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins :6DC Current per I/O Pin :40 mADC Current for 3.3V Pin :50 mAFlash Memory :32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM :2 KB (ATmega328)EEPROM :1 KB (ATmega328)Clock Speed :16 MHzArduino Uno R3 (Grade Ori)Microcontroller: ATmega328Operating Voltage: 5VInput Voltage (recommended):7-12VInput Voltage (limits) :6-20VDigital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins:6DC Current per I/O Pin :40 mADC Current for 3.3V Pin :50 mA

Flash Memory :32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM :2 KB (ATmega328)EEPROM :1 KB (ATmega328)Clock Speed :16 MHzArduino Uno R3 SMD (Grade Ori)Microcontroller :ATmega328Operating Voltage :5VInput Voltage (recommended) :7-12V

Arduino

Arduino

Arduino

7

8

9


5/42

Input Voltage (limits) :6-20VDigital I/O Pins :14 (of which 6 provide PWM output)Analog Input Pins :6DC Current per I/O Pin :40 mADC Current for 3.3V Pin :50 mAFlash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM :2 KB (ATmega328)EEPROM :1 KB (ATmega328)Clock Speed :16 MHzKit ArduinoKomponen JumlahBoard Arduino R3 1Kabel USB 1Servo 9G 1Sensor PIR 1Modul LCD Karakter 16x2 1Modul Ultrasound SR04 1Keypad Membran 1Breadboard 1Buzzer 5v 1Dioda 1n4148 2Dioda 1n4002 2Big Push Button 2Mini Push Button 2Potensio 10K 1LED 5 mm Merah 3LED 5 mm Kuning 3LED 5 mm Hijau 3LED 5 mm RGB 1Resistor 330 Ohm 5Resistor 10K 5

Arduino10


6/42

Sensor LDR 2Sensor Fotodioa 2Sensor LM35 1Kabel Jumper Arduino 1Header Male 1USBtinyISP programmer for Arduino bootloaderCondition: Brand New and High QualityUSBtinyISP is designed for AVR ,based on USB connector's ISP download wire.Officially supported by Arduino IDESUPPORT Arduino bootloader burning onto Atmega Chips4 Screw Holes versionPower LED and activity LED220 U Capacitor for stable process

Package list:1X USBtinyISP AVR ISP programmer1X 6PIN cable1X 10PIN cableRaspberry Pi Model BChip: Broadcom BCM2835 (CPU, GPU, DSP, and SDRAM)CPU: 700 MHz ARM1176JZF-S core (ARM6 family)GPU: Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profiledecoderMemory (SDRAM): 512 MB (shared with GPU)USB 2.0 ports: 2 (via integrated USB hub)Video outputs:Composite RCA (PAL & NTSC), HDMI (rev 1.3 & 1.4), raw LCD Panels via DSI

14 HDMI resolutions from 640350 to 19201200 plus various PAL and NTSC standards.Audio outputs: 3.5 mm jack, HDMIOnboard storage: SD / MMC / SDIO card slot

Arduino

11

12

Arduino


7/42

Onboard network: 10/100 Ethernet (RJ45)Low-level peripherals: 8 GPIO, UART, IC bus, SPI bus with two chip selects, +3.3 V, +5V, ground[58][63]Power ratings: 700 mA (3.5 W)Power source: 5 volt via MicroUSB or GPIO headerSize: 85.60 53.98 mm (3.370 2.125 in)Weight: 45 g (1.6 oz)Planned operating systems: Debian GNU/Linux, Fedora, Arch Linux ARM, RISC OS5A Digital Laboratory Power Supply-Output Voltage: (+5V, -5V, +12V, -12V, Variable 0 - 30V)- Total Output Current: 5A- Display LCD 2x16 with backlight- Display Voltage and CurrentTRN-02 Trainer Board Professional Version+USB ProgrammerSPECIFICATION- Bread board 700 lubang- LCD M1632 dengan backlight- 4 kanal ADC- Rangkaian pengkondisi sinyal (Zero Offset and Gain)- Voice amplifier + speaker 0,25W- Real Time Clock + Battery Backup- Stepper (Unipolar & Bipolar)- DC Driver max 2A

- Clock Generator, linear adjust and selector- Pulse generator, selector adjust- 6 digit Seven Segment & : untuk jam

- 8 bit LED Logic- 8 bit Switch push button- 8 bit Dip Switch- Dapat digunakan untuk mikrokontroler AVR ATMega8515

13

14


8/42

- Dapat digunakan untuk mikrokontroler Renesas dengan DST-R8C Stamp (tidak termasukdalam paket)

Paket terdiri

- Modul TRN-02- Kotak Plastik- RS232 Cable- ISP Cable- Power Supply 12V- LCD M1632 dengan backlight- User Manual- CD Software & Datasheet- 10 Kabel Black Housing 1p- 2 Kabel Black Housing 10p

SOFTWARE SPECIFICATION- Delta Studio IDE Software untuk MCS-51- Single HWDE Software untuk Renesas- Demo version Code Vision untuk AVR- AVR Studio untuk AVRDST-Train-RLog Modul Praktikum Rangkaian Logika-Logic Gate, AND, OR, NAND & NOR- Decoder, 2 to 4, 3 to 8, 4 to 16- Encoder- BCD to Seven Segment- Multiplexer, Monostable Multivibrator, Flip Flop, PISO, SIPO- Binary Counter- 8 bit Comparator- Frequency Meter Display 0 - 40KHz- 5 Channel Voltmeter input- 2 Channel Amperemeter input- In System Function Generator with Square, Sinus and Triangle Output

15


9/42

Package include:- DST-Train-Rlog Modul- Power Supply 5V/3A

- 10 metres red cable- 10 metres green cable- 10 metres black cable- Buku Praktikum untuk siswa- Manual Guide untuk pengajarDST-Train-Elka Modul Praktikum Elka Dasar- Serial/Paralel Feedback Amplifier- Oscillator Clap- Oscillator Hartley- Oscillator Crystal- Regulated Power- Power Amplifier- Analog AND Gate- Analog OR Gate- Analog NOT Gate- 3 channel variable 0 - 12V Output- 5 Channel Voltage Display- 2 Channel Current Display- 1 Channel Frequency Meter 0-40 KHz- In System Function Generator with Square, Triangle and Sinusoidal output

Package Include:- DST-Train-Elka- 10 metres Red Cable- 10 metres Green Cable- 10 metres Black Cable- 5 Power Supply 12V- Buku Praktikum untuk siswa

16


10/42

- User Guide untuk pengajarDST-Train-RA Modul Praktikum Rangkaian Analog-Practice for:* Differential Amplifier

* Inverting & Non Inverting Amplifier* Comparator* Impedance Amplifier* Transducer Amplifier* Current Source* 1st order Active High Pass Filter* Window Comparator* Precision Amplifier* Timer 555* Signal Generator- 3 channel variable 0 - 12V Output- 5 Channel Voltage Display- 2 Channel Current Display- 1 Channel Frequency Meter 0-40 KHz- In System Function Generator with Square, Triangle and Sinusoidal output

Package Include:- DST-Train-RA Modul- 10 metres Red Cable- 10 metres Green Cable- 10 metres Black Cable- 5 Power Supply 12V- Buku Praktikum untuk siswa- User Guide untuk pengajarLP2600 Smart Logic Design

-System built-in experimental unit of basic logic gates, assembled logic and digital logic units

18

17


11/42

No need TTL and CMOS devices to do experimental circuits. Save amount of materials and

time to solder devices. No need to solder IC devices to learn about practical experiments and basic logic programs

quickly .

Offer smart INPUT and OUTPUT circuit linkage function.

Offers practical input control settings. Reveal each gate, IC gate linkage and output linkage

results on output circuit.

Offers the pin of measurement point for convenient to measure various test point practically.

Fir for standard digital logic experiments programs.

pc ociluscup hantex dso 3064aModel: Hantek DSO-3064A - 4 Channels MSOBandwidth: 60 MHzSample rate: 200MSa/sPropscope USB Oscilloscope2 input channels25 Msps Maximum Sample Rate20 Vpp maximum input range (-10 V to +10 V when DC-coupled)10-bit input resolution over either the entire 20 Vpp range, or selectable 10, 2, and 1 Vppranges.1x/10x selectable probesModul Relay 16 ChannelMaterial : Plastic + iron + PCBSpecification :12V relay contact capacity and 10A / 250V,with light coupling protection;5V or 3.3V drive;

Parallax

Arduino

20

19

21

Hantex


12/42

Supports all SCM drive;Plate load power module don't need external power supply;The I/O port drive low level effectiveFeatures 16-channel relay module board

Other 12V 16-channel relay interface board, and needs 3.3V / 5V driver voltage;Equipped with high-current relay, AC 250V 10A; DC30V 10A;Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC,PLC,DSP, ARM, ARM, MSP430, TTL logic);Indication LED for each Relay's Status;Low Level is useful for driving I/O;With LM2576 Power;With optocoupler isolationRP5 Robot Tank Chassis 2 EncodersPerformance parameters:

Size: 180mm * 135mm * 58mm (L * W * H)Operating voltage: 7.2VCurrent :160-180 mAMaximum speed: 30cm / s (at 12V voltage, up to 42cm / s)Climbing ability:> 30 degreesPayload:> 7.5Kg

Product Configuration:

ChassisBattery boxGearOne pair of 280 motorsMotor inductance one pair of matching

Rover 5 Tank Chassis 2 Motor 2 EncodersSpesifikasiMotor rated voltage: 7.2VMotor stall current: 2.5A

22

23

Arduino

Arduino


13/42

Output shaft stall torque: 10Kg/cmGearbox ratio: 86.8:1Encoder type: QuadratureEncoder resolution: 1000 state changes per 3 wheel rotations

Speed: 1Km/hrFour motorsFour encodersInclude Driver Motor ModulArduino motor control shield L293DHere is a design for a full-featured motor shield that will be able to power many simple tomedium-complexity projects.L293D is a monolithic integrated, high voltage, high current, 4-channel driver.

Basically this means using this chip you can use DC motors and power supplies of up to 36Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA perchannel, the L293D chip is also whats known as a type of H-Bridge.

The H-Bridge is typically an electrical circuit that enables a voltage to be applied across aload in either direction to an output, e.g. motorArduino Nano Expansion sensor Shield14 I/O Pin (servo type with GND, power and signal)8 analog Pin with power output and GND6 PWM Pin1 Servo power input5 I2C expansion PinAREF output3.3V outputCopperhead WiFi Shield V2.0 for Arduino26

25

24 Arduino

Arduino

Arduino


14/42

Shield FeaturesAdd-on shield built for Arduino Diecimila, Duemilanove and Uno R2/R3Dimensions, shape, even color match exactly!True plug-n-play solution

Uses SPI for host communication (max speed 25MHz)All Arduino headers brought out for easy accessEasy access reset button on-boardOn-board PCB antennaSwitchable interrupt pin usage between INT0 and digital pin 8Switchable LED on digital pin 9Switchable CS pin for serial flash between digital pin 10 and digital pin 7[1]Wi-Fi Module Features802.11b Wi-Fi certified1Mbps and 2Mbps throughput speedsSupports both infrastructure (BSS) and ad hoc (IBSS) wireless networksAbility to create secured and unsecured networksWEP (64-bit and 128-bit)WPA/WPA2 (TKIP and AES) PSKLow power usageSleep mode: 250A

Transmit: 230mAReceive: 85mAPin UsageSPISlave select (SS) : Arduino pin 10 (port B, pin 2)Clock (SCK) : Arduino pin 13 (port B, pin 5)Master in, slave out (MISO) : Arduino pin 12 (port B, pin 4)Master out, slave in (MOSI) : Arduino pin 11 (port B, pin 3)


15/42

Interrupt (Uses only one of the following, depending on jumper setting)INT0 : Arduino pin 2 (port D, pin 2)DIG8 : Arduino pin 8 (port B, pin 0)LED : Arduino pin 9 (port B, pin 1)

To regain use of this pin, remove the LED jumper cap5V powerGNDEthernet Shield for ArduinoRequires and Arduino board (not included)Operating voltage 5V (supplied from the Arduino Board)Ethernet Controller: W5100 with internal 16K bufferConnection speed: 10/100MbConnection with Arduino on SPI portPower supply: 5v DCInterface: SPI(Ethernet & SD card)Support SD cardSupport up to four simultaneous socket connectionsCompatible with Arduino standard version/Mega seriesSize: 72x55x32mmLinkSprite ATWIN Quad-band GPRS/GSM Shield for ArduinoSOLID_ATGPRS_SHIELD_D32Sensor Shield V4 digital analog Module-Arduino mega

Compatible Mainboard : Arduino MEGA, ChipKit MAX32Shield Functions : AdapterOperation Level : Digital 3.3V,Digital 5Sensor Shield V5 For Arduino UnoCompatible Mainboard : Arduino unoShield Functions : AdapterOperation Level : Digital 3.3V,Digital 5Shield LCD Keypad for Arduino Arduino

27

29

30

31

28

Arduino

Arduino

Arduino

Arduino


16/42

Aduino LCD shield dengan keypad yang populer dan dapat digunakan dengan board Arduino(Uno, Mega, dll).Dapat langsung dipasang diatas board Arduino, tanpa menyolder dan tanpa kabel yg

berseliweran.

Menggunakan chip HD44780 dan merupakan LCD karakter 16x2 berwarna putih denganlampu backlight biru.Shield ini menggunakan library Arduino LCD4BitSHIELD XBEE ARDUINOStackable interfaces compatible with Arduino or IFlat-32 for easy cascadingProvide maximal 500mA under 3.3VMore indicator (ON/SLEEP, RSSI, ASS, Din, Dout)* LED for XBeeSwitchable of communication with FTDI-USB /Base boardFull 2.54mm break out for XBeeWith 3 optional wireless program hardware interfacesUSB HOST Emartee ADK Shield Module For Arduino Android V2.0USB Host Shield adalah sebuah papan add-on untuk platform pengembangan Arduino.Perisai menyediakan antarmuka USB Host, yang memungkinkan komunikasi penuh dankecepatan rendah dengan perangkat USB - keyboard, mouse, joystick, MIDI, kamera digital,Bluetooth, dan banyak lainnya.Tata letak antarmuka kompatibel dengan Arduino tidak hanya UNO dan Duemilanove, tetapi

juga dan mega 2560

Tidak ada SPI lebih re-kabel dan kode modifikasi - hanya solder termasuk konektor stackable(2 3 sisi perempuan ICSP konektor harus menghadap ke bawah), plug and play!Mendukung Google ADK.TV/monitor LED 40"

Arduino

Sony

32

33

34


17/42

Media Playback : 28 Video Format / 4 Audio Format / 2 Picture FormatMultilingualOSDDisplay TypeLED TVScreen Size40 inches Antenna InputComposite Video +Component + RCA AudioHDMID-Sub 15 PinOptical + 3.5mm Mini Jack FixedAudioUSBKonsumsi Daya84 WattsVoltaseAC 220V

AM2305 Digital Relative Humidity Temperature SensorFeatures:- High precision- Capacitive type- Outstanding long-term stability- Full range temperature compensated- Relative humidity and temperature measurement- Calibrated digital signal- Extra components not needed- Long transmission distance, up to 100 meters

- Low power consumption- Three-core shielded cable as outgoing lineDescription:

- Am2305 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensingelements is connected with 8-bit single-chip computer.- Every sensor of this model is temperature compensated and calibrated in accurate calibrationchamber and the calibration-coefficient is saved in type of programme in OTP memory, whenthe sensor is detecting, it will cite coefficient from memory.

35


18/42

- Small size & low consumption & long transmission distance(100m) enable AM2305 to besuited in all kinds of harsh application occasions. Single-row packaged with four pins, makingthe connection very convenient.Specification:- Model: am2305- Power supply :3.3-6V DC10 DOF Nine Axis IMU ModuleSpecifications:- Board size: 26mm * 22.5mm

- Pitch space: 2.54mm (100mil)- Power supply: 3.3V and 5V two power supply mode- can Read data by the IIC interface- chips:L3G4200D+ADXL345+HMC5883L+BMP085ADXL345 Module Gravity SensorFeatures :On-board ADXL345B, it's low cost cap-based accelerometer sensor;Support 5V/3.3V voltage input, onboard RT9161, better performance than 1117, faster loadthe appropriate speed, it is ideal for high noise power supply environment;Common Pins were lead out, Pin distance is standard 100mil (2.54mm), compatible for yournew system.PCB board is Gold-plated, Boad size: 2.8 (cm) x 1.4 (cm)BMP085 Barometric Digital Pressure Sensor ModuleFeatures:Pressure range: 300 - 1100hPa (9000 meters above sea level to -500 m).Power supply voltage: 1.8V - 3.6V (VDDA). 1.62V - 3.6V (VDDD).LCC8 package: lead-free ceramic carrier package (LCC).

36

37

38


19/42

Low power consumption: 5A in standard mode.

Hign Precision: low-power mode, the resolution of 0.06hPa (0.5 m).High linear mode with a resolution of 0.03hPa (0.25 m).With temperature output.

I2C interface.Temperature compensation.Lead-free, RoHS compliant.MSL 1.Response time: 7.5ms.Standby current: 0.1A.

Eliminates the need for an external clock circuit.Size: 21x15x10mm.Compass Module 3-Axis HMC5883LFeature :

Power Requirements: 2.7 to 6.5 VDCCommunication Interface: I2C (up to 400 kHz)Dimensions: 0.725 x 0.650 in (1.8 x 1.7 cm)Flame Sensor Module RelaySpecifications:Output Channel : 1Power Supply : 3.3/5VLoad Voltage : 10A 250VAC/ 30VDCPCB Board Size : 50mm x 26mm x 17mm/ 2" x 1" x 0.67" (L*W)Hole Size : 3mm/ 0.12"Material : Electric Part

Net Weight : 17gPackage Content : 1 x Flame Sensor + Relay ModuleInfrared Flame Sensor 5 Channel Module1. 5 channel infrared flame sensor design, wide range of detection (the detection range of theordinary single flame sensor is probably about 30, as the distance increases, the range isgradually reduced, the detection range of the product is greater than 120).

39

40

41


20/42

2. Able to output a digital signal (high and low)3. Able to output an analog signal (voltage signal)4. All five outputs status indicator5. Digital output detection distance adjustable.The analog output sensitivity adjustable, more

flexible design.6. Using 1% resistor design, signal output is more accurate, suitable for the needs of high-

precision measurement occasions.7. Mounting for installasion : 3 Hole8. Supply : 3.3 - 9VL3G4200D Triple Axis Gyro Angular Velocity SensorL3G4200D Features: Three selectable full scales (250/500/2000 dps) I2C/SPI digital output interface

16 bit-rate value data output 8-bit temperature data output Two digital output lines (interrupt and data ready) Integrated low- and high-pass filters with user selectable bandwidth Ultra-stable over temperature and time Wide supply voltage: 2.4 V to 3.6 V Low voltage-compatible IOs (1.8 V) Embedded power-down and sleep mode Embedded temperature sensor Embedded FIFO High shock survivability

Extended operating temperature range (-40 C to +85 C) Dimension16mm*17mmSR06 Ultrasound Sensor ModulFeatures :

42

43


21/42

power supply :5VDC quiescent current :


22/42

The JTAG ICE support: of ATmega16, on ATmega16L ATMega162 ATmega162V, withATmega165 ATmega165V, ATMega169, ATmega169V, ATMega32, ATMega323,ATmega323L, ATmega32L, ATMega64, ATmega64L, the ATMega128 AppliedATmega128L, AT90CAN128ATMega16, on ATmega16L, ATMega162, ATmega162V, with

ATmega165, and ATmega165V, ATMega169 ATmega169V, ATMega32, ATMega323,ATmega323L, ATmega32L, ATMega64, ATmega64L, ATMega128, ATmega128L,AT90CAN128AD9850 Signal Wave Generator Module 0-40MHz2 sine wave and 2 square wave outputAD9850: 0-40MHz

After the 20-30MHz frequency harmonics increases, the waveform will be less and less cleanSquare Wave: 0-1MHzLow-pass filter with 70MHz, so the waveform better than SN

Parallel and serial data input can be selected via a jumperDA produced the benchmark pin (PIN12) leads for easy adjustment to do the magnitude of theoutput waveform ApplicationComparator reference input voltage generated by the variable resistor, the resistor can beadjusted duty cycle square wave of differentActive AD9850 125MHz crystal oscillator modulesCapacitance Meter CM8601A+CAP:200PF (0.5%rdg+1dgt+0.5PF)

2000p/20n/200n/2 /20 /200 F (0.5rdg+1dgt)2000 F (2%rdg+1dgt)

20mF (4%rdg+1dgt)Dimension:82*180*38(mm)Weight:approx,210g(including battery)Quantity:40pcsDimension:43*27.5*24(mm)CMOS Camera Module OV7670Description

48

47

46


23/42

Photographic array 640X480IO voltage of 2.5V to 3.0V (internal LDO for nuclear power 1.8V)Power work 60mW/15fpsVGAYUV

Sleep


24/42

Lightweight, easy-to-replace sensors provide accurate measurement of tips for verification orcalibration processes. When the MAX HOLD feature is enabled, the thermometer will displaythe maximum temperature measured.

To preserve battery life, the auto shutoff feature turns the thermometer off when not used forthree minutes. The thermometer design allows for easy measurements from right or lefthanded operators. The sensor (P/N: 191-211) has a special metal alloy coating (patent pending) that resists

corrosion and oxidation. Note: the 191-211 sensor can measure temperatures up to 500C(932F). For higher temperatures, please use the applicable temperature probe (seeAccessories: P/N A1310.) Sensor replacement is quick and easy

Easy-to-read digital temperature display

FTDI Basic Breakout USB-TTLOne of the nice features of this board is a jumper on the board that allows the board to beconfigured to either 3.3V or 5V (both power output and IO level).

The newest revision of our FTDI Basic which use a 6-pin header on the bottom, smaller andmore compact. Functionality has remained the same. This is a basic breakout board for theFTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to workwith official Arduino and cloned 5V/3V Arduino boards. It can also be used for general serialapplications. The major difference with this board is that it brings out the DTR pin as opposedto the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a

new Sketch is downloaded. This is a really nice feature to have and allows a sketch to bedownloaded without having to hit the reset button. This board will auto reset any Arduino

board that has the reset pin brought out to a 6-pin connector.The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable.The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins toalign the FTDI basic board with your Arduino target.This board has TX and RX LEDs that make it a bit better to use over the FTDI cable.

51


25/42

52 GPS ceramic built-in antennaGPS module Ublox NEO-6MUblox NEO-6M-0001 antenna integrated GPS module built-in ceramic antennaUSART serial TTL or IIC communication.

The module integrates a 3V button battery.The serial port baud rate default 9600,4800 and 38400 optional,

NMEA communication protocol. 57600 optional UBX protocol.Compatible with a variety of flight control GPS.Module size: 39mm * 26mmPower supply: 3.3V-5VModul Bluetooth HC05Features :Bluetooth protocal : Bluetooth Specification v2.0+EDRFrequency : 2.4GHz ISM band

Modulation : GFSK(Gaussian Frequency Shift Keying)Emission power :


26/42

User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,460800,921600,1382400.Dimension : 26.9mm*13mm*2.2mmModul Bluetooth HC05

Features :Bluetooth protocal : Bluetooth Specification v2.0+EDRFrequency : 2.4GHz ISM bandModulation : GFSK(Gaussian Frequency Shift Keying)Emission power :


27/42

Plate load power module don't need external power supply;The I/O port drive low level effectiveFeatures 16-channel relay module boardOther 12V 16-channel relay interface board, and needs 3.3V / 5V driver voltage;

Equipped with high-current relay, AC 250V 10A; DC30V 10A;Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC,PLC,DSP, ARM, ARM, MSP430, TTL logic);Indication LED for each Relay's Status;Low Level is useful for driving I/O;With LM2576 Power;With optocoupler isolationModul Relay 8 ChannelEasy to be controlled by a lot of Microcontrollers like Arduino, 8051, AVR, PIC, ARM, DSPetc.

With high-current relay, AC250V 10A, DC30V 10AEach channel needs 15-20mA driver currentColor: blue

Dimension: Approx. 13.8x5.7x2cmMaterials: PCB board and electronic componentsPackage included:1 X 5V 8 channel relay moduleModul Sensor Getar 801sSize: 20mm* 32mm *11mmthe main chip: LM393, 801S

work voltage: DC 5Vwith the signal output instructions;with analog and TTL level signal output signal output;the output valid signal is high, the light goes out;sensitivity adjustable (fine tuning);vibration detection range, non-directional;with mounting holes, firmware installation flexible and convenient.

58

57


28/42

Multimeter DT9205M1.CMOS integrated circuits, the original double-integrating the A / D conversion, automaticzeroing, automatic polarity selection, overrange indication

2.LCD screen with high contrast 70 * 40MM big screen, word up to 25MM. Press theobservation position needed, the display screen freely changing the angle of about 70, toobtain the best observation3.With automatic shutdown function, about 15 minutes after boot automatically cut off the

power to prevent the instrument after use forgets to turn off the power to repeat the operationof the power switch, you can continue the boot.4.New optimized design of highly reliable range / function rotary switch structure. With 32stalls. Avoid misuse

OV5116 CMOS Camera ModulFeatures :- Model: OV5116 CMOS- Color: Black- Material: CCL- Power supply: DC 5V- COMS sensor: 1/4"OV5116 B/W CMOS- Video format: PAL- Sensitive area: 3.2mm x 2.5mm- Definition: 240TV lines

- Effective pixels: PAL: 352 x 288RFID module Kit RC552Basic on the Philips MFRC522 ChipPower Voltage : 3.3V ;Current :13-26mAOperating frequency: 13.56MHzRead Range: 0 ~ 60mm (mifare1 card)

61

59

60


29/42

Interface: SPIDimensions: 40mm 60mmSize of Round Tag : 0.87 85.5 54 mmSize of Rectangle Tag : 32 x 40.5 x 4.2 mm

Servo motor Controller driver 16 Channels1. Controlling chip power supply range: 6.5V~12V or 4.5 V~5.5 V.2. Servos power supply range: DC (voltage depends on the parameters of the servos,commonly 5V DC).

3. Control channels: can control 16channels at the same time,speed is precisely adjustable.

4. Communications input: USB or serial port (TTL, UART). (can use wireless bluetooth

module or other wireless module to wireless control)5. Signal output: PWM (accuracy of 1us).6. Servo motor driver resolution: 1us, 0.09 degrees.7. Baud rate range: 9600 19200 38400 57600 115200 128000. (fully automaticidentification, no need setting)8. Support of servo motors: Futaba, Hitec or others.9. PCB size: 51 mm x 43.5 mm x 1.6 mm (installation hole spacing: 42 * 35.5 mm).10. Control mode: USB and serial interface (TTL) accept command mode.11. Flash: on-board 512 K ROM.USB TO TTL/RS485 FTDI Interface Modul

Standard: USB2.0 standard, backward compatible, in line with the standard RS485.Direction control: the use of automatic data flow control, auto distinguish and control datatransfer direction.Baud :300-9216000bps, automatically detecting the serial signal data rate.Load capacity: support multipoint, each converter allows RS485 interface device to connect32.Interface Protection: TVS tube protection, USB self-recovery protection.

62

63


30/42

Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac.Support devices with RS485 interface: surveillance cameras, video capture device, fingerprintattendance machine, PBX, CNC machine, microcontroller, etc.This converter provides two way serial communications signal.

Conversion between the RS485.USBtinyISP programmer for Arduino bootloaderUSBtinyISP is designed for AVR ,based on USB connector's ISP download wire.Officially supported by Arduino IDESUPPORT Arduino bootloader burning onto Atmega Chips4 Screw Holes versionPower LED and activity LED220 U Capacitor for stable process

Package list:

1X USBtinyISP AVR ISP programmer1X 6PIN cableXBEE AdapterUsed for the XBee module configuration parametersEasily connected to a PC via mini USB cableXBee-setting support software X-CTUAlso used as a USB-TTL adapterVoltage: +5V (USB Power)

DSR-08 8 Channel Delta Servo Controller- 8 Channel Servo Controller

- 25 Step sudut servo- Pengaturan kekuatan servo secara independent- RS232 Port- 8 Encoder Feedback input (kompatibel dengan DEC-xx)- 8 Sensor Feedback (dapat dihubungkan dengan limit switch atau sensor arus)- Posisi sudut dapat digerakkan secara relatif- Baudrate 9600 bps 8N1

65

66

64


31/42

Paket terdiri dari:- Modul DSR-30- Kabel RS232- CD

- User ManualDSR-30 30 Channel Delta Servo Controller- 30 Kanal Servo- Dapat mengetahui nilai PWM dari tiap servo- UART TTL- PCB Through hole

Paket terdiri dari:- Modul DSR-30- Kabel RS232

- CD- User ManualGWS Standard S03N STD Servo Motor- Speed (sec/60deg): 0.23 Torque (Kg-cm/Oz-in): 2.40/35

Size (mm): 39.5x20x39.6

Weight (g/oz): 41/1.44

Hitec HS-225BB Servo MotorControl System: +Pulse Width Control 1500usec NeutralRequired Pulse: 3-5 Volt Peak to Peak Square Wave

Operating Voltage: 4.8-6.0 VoltsOperating Temperature Range: -20 to +60 Degree COperating Speed (4.8V): 0.14sec/60 at no loadOperating Speed (6.0V): 0.11sec/60 at no loadStall Torque (4.8V): 54.15 oz/in. (3.9kg.cm)Stall Torque (6.0V): 66.65 oz/in. (4.8kg.cm)Operating Angle: 45 Deg. one side pulse traveling 400usec

67

69 Hitec

68


32/42

360 Modifiable: NoDirection: Clockwise/Pulse Traveling 1500 to 1900usecCurrent Drain (4.8V): 8mA/idle and 300mA no load operating

Current Drain (6.0V): 8.8mA/idle and 340mA no load operatingDead Band Width: 8usecMotor Type: 3 Pole FerritePotentiometer Drive: Indirect DriveBearing Type: 1 Ball Bearing and 1 Oilite BushingGear Type: NylonConnector Wire Length: 11.81" (300mm)Dimensions: 1.27" x 0.66"x 1.22" (32.4 x 16.8 x 31mm)Weight: 0.95oz (27g)Hitec HS-225MG Servo Motor

Control System: +Pulse Width Control 1500usec NeutralRequired Pulse: 3-5 Volt Peak to Peak Square WaveOperating Voltage: 4.8-6.0 VoltsOperating Temperature Range: -20 to +60 Degree COperating Speed (4.8V): 0.14sec/60 at no loadOperating Speed (6.0V): 0.11sec/60 at no loadStall Torque (4.8V): 54.15 oz/in. (3.9kg.cm)Stall Torque (6.0V): 66.65 oz/in. (4.8kg.cm)Operating Angle: 45 Deg. one side pulse traveling 400usec360 Modifiable: Yes

Direction: Clockwise/Pulse Traveling 1500 to 1900usecCurrent Drain (4.8V): 8mA/idle and 300mA no load operating

Current Drain (6.0V): 8.8mA/idle and 340mA no load operatingDead Band Width: 8usecMotor Type: 3 Pole FerritePotentiometer Drive: Indirect Drive

70 Hitec


33/42

Bearing Type: 1 Ball Bearing and 1 Oilite BushingGear Type: 4 metal and 1 nylonConnector Wire Length: 11.81" (300mm)Dimensions: See Schematic

Weight: 1.10oz (31g)Hitec HS-311 Servo Motor Speed (sec/60o): 0.19

Torque (Kg-cm/Oz-in): 3.7/49

Size (mm): 40 x 20 x 37

Weight (g/oz): 43/1.51

Hitec HS-422 Motor Servo3-POLE FERRITE MOTORDUAL OILITE BUSHINGLONG LIFE POTENTIOMETER

INDIRECT POTENTIOMETEROPERATING VOLTAGE RANGE : 4.8V TO 6.0VTORQUE : 3.3kg.cm(45.82oz.in)DIMENSIONS : 40.6x19.8x36.6mm(1.59x0.77x1.44in)Hitec HS-645MG Servo Motor Speed (sec/60o): 0.20

Torque (Kg-cm/Oz-in): 9.6/133

Size (mm): 41 x 20 x 38

Weight (g/oz): 55.2 /1.94

Metal gears (Alumite)

Dual ball-bearings

Hitec HS322 Servo Motor- Speed: 0.15 sec @60 derajat- Torque: 3.7 kg/cm 51.38 oz/in

- Size: 40x20x36.5 mm- Weight: 43 g - 1.51 oz- Karbonite Gear

Hitec

Hitec

Hitec

Hitec

71

72

73

74


34/42

HS-805BB Giant Servo Motor Speed (sec/60o): 0.13

Torque (kg-cm)/Oz-in: 24.7/343

Size (mm): 29 x 13 x 30

Weight (g/oz): 19.2/0.67Mekanik Lengan Robot (tanpa servo)

Spesifikasi- 3 Servo GWS04, 1 untuk rotasi lengan dan 2 untuk gerakan naik turun- 3 Servo HS-322, 1 untuk gerakan naik turun ruas kedua, 1 untuk rotasi gripper dan 1 untukcengkeraman gripper- Luas body 20 x 18 cm- Termasuk Gripper dengan gap maksimum 8 cmSPG800 HS-800 Series Servo Power GearboxHS-805BB Servo Power gearbox dapat meningkatkan hasil Hitec HS-805BB atau HS-815BB

Servo sampai lima kali torque asli dari Servo tanpa kehilangan sudut apapun dari jangkauanatau kendali dari yang ditentukan servo* 170 gr (tidak termasuk servo)* Bantalan peluru* Rasio gear dapat diubah dengan mudah* Tetap sesuai dengan gerakan asli servo* Dupont Delrin 32 pitch gearsDigital Torque MG996R Servo Metal GearProduct Name: Digital Torque MG996R Servo Metal Gear for Futaba JR Car MG995Upgraded

Supplier Code: MG996RProduct Weight: 55gProduct size: 40.7 * 19.7 * 42.9mmProducts Rally: 9.4kg/cm (4.8V), 11kg/cm (6V)Reaction speed: 0.17sec/60degree (. 4.8v) 0.14sec/60degree (6v)Operating voltage: 4.8-7.2VOperating temperature: 0 -55

77

78

75

76


35/42

The gear forms of: metal gearThe working dead: 5us (microseconds)Suitable for fixed-wing aircraft of the model: 50 -90 grade methanol for fixed wing aircraft aswell as 26cc-50cc gasoline

Control singal is PWM which is analog quantity.MG90S Metal Geared Micro Tower Pro ServoProduct Model: MG90SProduct size: 22.8 * 12.2 * 28.5mmmmProduct weight: 13.6gWorking torque: 2KG/cmReaction speed: 0.11 seconds / 60 degrees (4.8VOperating temperature: 0 -55The deadband setting: 5 microsecondsPlug Type: JR, FUTABA General

Rotation angle: 180 degreesServo: analog ServoOperating currentOperating voltage: 4.8VStructural Material: copper metal teeth, coreless motor, double ball bearingThe attachment contains: helm, the line is long 30CM, fixing screws, damping pouches andaluminum sets and other accessories (see really making plans)

Scope: small and medium-sized electric model aircraft and model.

Roda + Motor Servo DS04-NFCDS04-NFCBerat :38gDimensi :40.8 x 20 x 39.5 mmtorsi5.5kg/cm(at 4.8V)rpm0.22sec/60(at 4.8V)range tegangan motor4.8v-6v

79

80


36/42

TowerPro MG995 Metal GearCompliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc. Great fortruck, Boat, Racing Car, Helicopter and Airplane.

Power Supply: Through External Adapter.Stable and Shock ProofConnector Wire Length 300mmOperating Speed : 0.17sec / 60 degrees (4.8V no load)Operating Speed : 0.13sec / 60 degrees (6.0V no load)Stall Torque : 9 kg-cm (180.5 oz-in) at 4.8VStall Torque : 12 kg-cm (208.3 oz-in) at 6VOperation Voltage : 4.8 - 7.2VoltsGear Type: All Metal GearsOriginal box: NO

Color: BlackItem size: 40 * 19 * 43mmServo weight: 55g

Net weight: 66g (with accessories)Package weight: 75gTowerPro SG90 9G micro small servoDimension: 22mm x 11.5mm x 22.5mm

Net Weight: 9 gramsOperating speed: 0.12second/ 60degree ( 4.8V no load)Stall Torque (4.8V): 17.5oz /in (1kg/cm)

Temperature range: -30 to +60Dead band width: 7usecOperating voltage: 3.0V~7.2VAll nylon gearConnector wire length 150mmBasic Elecromagnetic Trainer

81

82

83


37/42

[1] Trainer mencakup: elektro-fisik hingga dasar kemagnetan termasuk prinsip-prinsiptransformator, motor dan generator.[2] Trainer terdiri dari sekumpulan modul dengan clear silk-screen printing yangmenunjukkan simbol-simbol komponen, identitas dan interkoneksi.

[3] dilengkapi dengan power supply, modul percobaan, aksesoris[4] terdapat general-purpose multimeter[5] topik-topik yang bisa dipelajari Dasar fenomena-fenomena kemagnetan

Medan magnet

Medan maget yag ditimblkan arus listrik

polaritas kemagnetan sebuah solenoid

fluks magnet dan distribusi fluks

induksi elektromagnetik

Reversibilitas aksi-aksi elektromagnetik

hukum Lenz pada GGL diinduksi Gaya Elektromagnetik

Motor listrik / generator

Tegangan transformasi

Saat transformasi

MULTIFUNCTION ELECTRICAL MACHINE TRAINER[1] Trainer ini terdiri Dari satu set komponen-komponen Modular yang bisa dipasang dalamKonfigurasi berbeda Untuk Membangun lebih banyak mesin rotasi: 2 And 4 Poles AC Squirrel Cage motor 2 Poles AC Slip Ring Motor

Single Phase AC Capacitor motor Single Phase AC RepLilsion motor AC Synchronous motor AC Synchronous Generator AC/DC Universal motor DC Series Excitation Machine DC Shunt Excitation Machine

84


38/42

DC Compound Excitation Machine DC Independent Excitation Machine[2] Rotor-rotor dan brush dapat dengan mudah untuk dipindah-pindah sesuai dengankonfigurasi yang diinginkan

[3] sebagai sebuah Laboratorium Terpadu untuk melakukan berbagai percobaan dan pengujianpada mesin listrik standar[4] Karena visibilitas komponen-komponennya, mahasiswa dapat belajar kelistrikan danmekanika secara detil

[5] The Belitan Apakah Terhubung ke Dewan Terminal On Top Of Yang Mereka ApakahJelas Diidentifikasi Dengan Gambar Yang Tampilkan The Logic Internal Dan MembuatPemahaman mereka Dan Koneksi Mudah Dalam Kombinasi Kemungkinan Berbeda.[6] Mesin sinkron yang secara keseluruhan Implementasi riel dan bukan simulasi[7] Terdapat sebuah manual yang menggambarkan secara detil hubungan kelistrikan dan

prosedur pemasangan mesinDC MOTOR SPEED CONTROLThe module incorporates all the sub-system necessary for the study of dc motor speed controlin both open and closed loop set ups two small dc motors are ganged together one is used asthe drive motor and the other as a tachometric generator a slot-type optical feedback sensor isalso mechanically ganged to a dc motor the small motors ensure safe operation in allcircumstances this is important when the student has little experience

1 small size mechanically ganged dc motorsslot-type optical sensor and encoder disk. This arrangement provides 8 pulses permotor revolution

frequency-to-voltage converter for encorder sinyaltacho generator signal conditionerdc reference generatorloop amplifier with adjustable gainswitch modepower driver for the motorAC MOTOR CONTROL

85

86


39/42

The module includes an AC micro-motor and drive circuit. It is designed to allow the studentto study the application principles and limitations of these tranducersThe panel includesa variable-frtequency digital PWM sine/square signal generator that is usedas apilot signal for the power driver stage

The power bdriver stage produces the two voltages for the motor phasesAn optical encoder is supplied to measure motor speedTwo phase AC micro-motorVariable frequency clock generatorDigital sine/ square signal generatorPulse conditionersPower output stagesThe motorMotor driving techniquesTiming generation stage

EPROM address generationSynthesized wave shapesOperation of the drive with square wavesOperation of the drive with sine-wavesON/OFF SENSOR AND ACTUATORSThis module is collection of commonly used ON/OFF input/output devicesThe module allows the student to study the principle and use of these tranducersReflective opto-switch and buffer amplifierLed indicator and driver circuitPiezo- ceramic beeper and driver circuit

Electromechanical relayHall effect sensor switch and output bufferTesting arrangement for hall effect sensorProximity switch inductive typeSolenoid as a sample of electrical to mechanical output actuatorElectronic switch consisrting of atriac with opto- insulated control device. An arrangement todrive AC and DC loads is also includes

87


40/42

All the items of this module are of a quite general use in the industry. The student is made tobecome quickly acquainted with their principles of operation, characteristics and limits of usePLC Trainer

* Tegangan Input : 220 VAC* Tegangan Output 24 VDC* Berbasis PLC 10 i/ o 1acpm In System Programer* Interface ISP Programmer ke PC menggunakan parallel/ printer port* Percobaan : Akses Port Input / output secara bite / byte* Kabel Serial dan Asesoris* CD Programer dan Operating Instruction trainer PLCLego Mindstorms NXT 2.132-bit microPRO 2.0cessor, more memory PRO 2.0gramming4 input ports / 3 output ports and seven 6-wire cords

Large Matrix displayReal sound speakerUSB 2.0 and BluetoothThree InteractiveServo Motors with built-in rotation sensor (one degree steps)Four SensorsOne Ultrasonic SensorTwo Touch SensorsOne (triple function) Color Sensor

New 2.0 SoftwareOscilloscope 25MHz Owon 5022S

Main Features:1.25MHz?100MHz Bandwidth2.Up to 500MS/s real time sample rate3.Max.6000 record length for each channel4.Dual channels plus External trigger5.Waveform mathematic function6.7.8 inch color LCD display for large view

88

89

90


41/42

7.PC communication through the USB or RS232 port for real-time data transmission8. Advanced trigger: Edge trigger, Video trigger andAlternate triggerApplication:1. Electronic circuit debugging

2. Circuit testing3. Design and manufacture4. Education and training5. Automobile maintenance and testingLemari Etalase Kaca 4 rak (ukuran p-l-t 2 x 0.5 x 1.5) msemua sisi dan rak berbahan kaca dibingkai metal. empat susun. Empat Pintu geser.Lemari Etalase Kaca 3 rak (ukuran p-l-t 2 x 0.5 x 1.5) msemua sisi dan rak berbahan kaca dibingkai metal. tiga susun. Empat Pintu geser.AC1 PK

840 Watt290 x 870 x 214 (indoor)PCPlatform Desktop PCProsessor Intel Core-i3 ProcessorProcessor Onboard Intel Core i3-3220 Processor (3.3 GHz, Cache 3MB)

Ivy Bridge

Chipset Intel H61Memori Standar 2GB DDR3 PC-12800

Max. Memori 16GB (2 x 8GB)Memori Slot 2VGA Card Intel HD GraphicsAudio IntegratedInternal Speaker (1.5W)Speaker Integrated

Hard Drive 500GB Serial ATA, 7200RPM

93

94 LENOVO

Panasonic

92

91


42/42

Optical Drive DVDRWNetworking Gigabit EthernetKecepatan Jaringan 10 / 100 / 1000 MbpsKeyboard USB Keyboard

Ragam Input Device USB Optical MouseRagam Card Reader 9 in 1 Media ReaderAntarmuka / InterfaceFront2 x USB 2.01 x Microphone1 x HeadphoneRear

4 x USB 2.01 x DVI, Support Multi-Display

1 x RJ451 x AC-IN1 x RS232(serial port)|| 1 x LPT Port||NON-OSMonitor, Mouse, KeyboardChassis Form Factor TowerPower Supply180W 70% Manual280W 85% Auto-sensingDimensi 160 x 399.6 x 355 mm (w x d x h)Berat 7.5kg

identitas barang

Documents